Volume 14, Issue 2 (5-2014)
Modares Mechanical Engineering 2014, 14(2): 27-33 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Shabgard M R, Jafarian Zanjaban M, Azarafza R. Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel. Modares Mechanical Engineering 2014; 14 (2) :27-33
URL: http://mme.modares.ac.ir/article-15-12394-en.html
URL: http://mme.modares.ac.ir/article-15-12394-en.html
Abstract: (7892 Views)
This paper studies the effects of soluble cutting fluid-based CuO Nanofluid on machining force and surface roughness in turning of hardened AISI 4340 tool steel. These influences, Moreover, are compared with the outputs of similar tests through dry and soluble cutting fluid. The obtained results showed 1% volume fraction of CuO Nanoparticles added to soluble oil as cutting fluid was considerably reduced machining force and surface roughness in comparison to soluble cutting oil and dry. The investigations indicated that CuO Nanofluid reduced surface roughness and machining force by 49% and 24% respectively. Moreover, the results illustrated that the lowest surface roughness obtained in cutting speed 250 m/min, feed rate 0.1 mm/rev and cutting nanofluid.
Article Type: Research Article |
Subject:
Metal Forming
Received: 2013/08/18 | Accepted: 2013/10/24 | Published: 2014/04/12
Received: 2013/08/18 | Accepted: 2013/10/24 | Published: 2014/04/12
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |