1. 1- Huang G, Hou W, Shen Y. Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Materials Characterization. 2018;138:26-37. [
Link] [
DOI:10.1016/j.matchar.2018.01.053]
2. Huang G, Shen Y, Guo R, Guan W. Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: Evaluation of microstructural, mechanical and electrical behavior. Materials Science and Engineering: A. 2016;674:504-513. [
Link] [
DOI:10.1016/j.msea.2016.07.124]
3. Hoziefa W, Toschi S, Ahmed MM, Morri A, Mahdy AA, Seleman ME, et al. Influence of friction stir processing on the microstructure and mechanical properties of a compocast AA2024-Al2O3 nanocomposite. Materials & Design. 2016;106:273-284. [
Link] [
DOI:10.1016/j.matdes.2016.05.114]
4. Sajjadi SA, Ezatpour HR, Torabi Parizi M. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes. Materials & Design. 2012;34:106-111. [
Link] [
DOI:10.1016/j.matdes.2011.07.037]
5. Mahmoud TS. Surface modification of A390 hypereutectic Al-Si cast alloys using friction stir processing. Surface and Coatings Technology. 2013;228:209-220. [
Link] [
DOI:10.1016/j.surfcoat.2013.04.031]
6. Cartigueyen S, Mahadevan K. Role of friction stir processing on copper and copper based particle reinforced composites-a review. Journal of Materials Science & Surface Engineering. 2015;2(2):133-145. [
Link]
7. Węglowski MS. Friction stir processing-state of the art. Archives of Civil and Mechanical Engineering. 2018;18(1):114-129. [
Link] [
DOI:10.1016/j.acme.2017.06.002]
8. Akramifard HR, Shamanian M, Sabbaghian M, Esmailzadeh M. Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing. Materials & Design (1980-2015). 2014;54:838-844. [
Link] [
DOI:10.1016/j.matdes.2013.08.107]
9. Vijayavel P, Balasubramanian V, Sundaram S. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites. Materials & Design. 2014;57:1-9. [
Link] [
DOI:10.1016/j.matdes.2013.12.008]
10. Khan NZ, Khan ZA, Siddiquee AN. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength of friction stir welded 6063 aluminium alloy. Materials Today: Proceedings. 2015;2(4-5):1450-1457. [
Link] [
DOI:10.1016/j.matpr.2015.07.068]
11. Chen Y, Ding H, Malopheyev S, Kaibyshev R, Cai ZH, Yang WJ. Influence of multi-pass friction stir processing on microstructure and mechanical properties of 7B04-O Al alloy. Transactions of Nonferrous Metals Society of China. 2017;27(4):789-796. [
Link] [
DOI:10.1016/S1003-6326(17)60090-6]
12. Yang R, Zhang Z, Zhao Y, Chen G, Guo Y, Liu M, et al. Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites. Materials Characterization. 2015;106:62-69. [
Link] [
DOI:10.1016/j.matchar.2015.05.019]
13. Ahmadifard S, Momeni A. Fabrication of Al 2024-boron carbide surface nano composite by friction stir processing. Modares Mechanical Engineering. 2017;17(8):343-350. [Persian] [
Link]
14. Eskandari H, Taheri R, Khodabakhshi F. Friction-stir processing of an AA8026-TiB2-Al2O3 hybrid nanocomposite: Microstructural developments and mechanical properties. Materials Science and Engineering: A. 2016;660:84-96. [
Link] [
DOI:10.1016/j.msea.2016.02.081]
15. Zhang YN, Cao X, Larose S, Wanjara P. Review of tools for friction stir welding and processing. Canadian Metallurgical Quarterly. 2012;51(3):250-261. [
Link] [
DOI:10.1179/1879139512Y.0000000015]
16. Yakaboylu GA, Sabolsky EM. Determination of a homogeneity factor for composite materials by a microstructural image analysis method. Journal of Microscopy. 2017;266(3):263-272. [
Link] [
DOI:10.1111/jmi.12536]
17. Ashjari M, Mostafapour Asl A, Rouhi S. Experimental investigation on the effect of process environment on the mechanical properties of AA5083/Al2O3 nanocomposite fabricated via friction stir processing. Materials Science and Engineering: A. 2015;645:40-46. [
Link] [
DOI:10.1016/j.msea.2015.07.093]
18. Saini N, Dwivedi DK, Jain PK, Singh H. Surface modification of cast Al-17% Si alloys using friction stir processing. Procedia Engineering. 2015;100:1522-1531. [
Link] [
DOI:10.1016/j.proeng.2015.01.524]
19. Dolatkhah A, Golbabaei P, Besharati Givi M, Molaiekiya F. Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing. Materials & Design. 2012;37:458-464. [
Link] [
DOI:10.1016/j.matdes.2011.09.035]
20. Dadashpour M, Mostafapour A, Yeşildal R, Rouhi S. Effect of process parameter on mechanical properties and fracture behavior of AZ91C/SiO2 composite fabricated by FSP. Materials Science and Engineering: A. 2016;655:379-387. [
Link] [
DOI:10.1016/j.msea.2015.12.103]
21. Sathiskumar R, Murugan N, Dinaharan I, Vijay SJ. Prediction of mechanical and wear properties of copper surface composites fabricated using friction stir processing. Materials & Design. 2014;55:224-234. [
Link] [
DOI:10.1016/j.matdes.2013.09.053]
22. Vijayavel P, Balasubramanian V. Effect of pin profile volume ratio on microstructure and tensile properties of friction stir processed aluminum based metal matrix composites. Journal of Alloys and Compounds. 2017;729:828-842. [
Link] [
DOI:10.1016/j.jallcom.2017.09.117]
23. Dinaharan I. Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing. Journal of Asian Ceramic Societies. 2016;4(2):209-218. [
Link] [
DOI:10.1016/j.jascer.2016.04.002]