Volume 18, Issue 3 (2018)                   IQBQ 2018, 18(3): 126-134 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

taghipoor H, damghani noori M. Experimental Investigation of Energy Absorption in Foam Filled Sandwich Beams with Expanded Metal Sheet as Core under Quasi-static Bending. IQBQ. 2018; 18 (3) :126-134
URL: http://journals.modares.ac.ir/article-15-4430-en.html
1- Ph.D candidate in mechanical engineering
2- Associated of Mechanical Engineering of Semnan University
Abstract:   (1233 Views)
In this research, influence of foam filling technique in sandwich beams with expanded metal sheet as core by using lightweight rigid polyurethane foam is investigation. Relationships between the force and displacement at the midspan of the sandwich beams are obtained from the experiments. Three types of Steel lattice cores both bare and foam-filled were subjected to quasi-static. The performance of sandwich structures with expanded metal sheets as core were studied under transverse bending. In the following, by studying the orientation of the core layers to evaluation the impact parameters, including Specific Energy Absorption (SEA) as discussed testing purposes. the energy absorbing system can be used in the aerospace industry, shipbuilding, automotive, railway industry and elevators to absorb impact energy. experimental results showed that foam filling technique can significantly increase specific absorbed energy. Results of three point bending crushing tests showed that the SEA of foam-filled sandwich beam increased by 74 %, comparing to the hollow beam. Also, appropriate orientation of core in the sandwich beam caused to increase the specific energy absorption by 66.5%. Finally, appropriate geometric parameters and the best examples of criteria considered with respect to the objectives, are introduced.
Full-Text [PDF 1488 kb]   (750 Downloads)    
Article Type: Research Article | Subject: Impact Mechanics
Received: 2017/11/22 | Accepted: 2018/02/3 | Published: 2019/02/23

Add your comments about this article : Your username or Email:
CAPTCHA code