Volume 12, Issue 3 (8-2012)
Modares Mechanical Engineering 2012, 12(3): 95-102 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Malekan M, Mirzaei M. Crack Growth Modeling for a Thin Aluminum Tube under Gaseous Detonation Loading using Cohesive Element. Modares Mechanical Engineering 2012; 12 (3) :95-102
URL: http://mme.modares.ac.ir/article-15-1139-en.html
URL: http://mme.modares.ac.ir/article-15-1139-en.html
Abstract: (5701 Views)
Abstract- This paper reports the finite element modeling of axial crack growth in a thin aluminum tube under gaseous detonation loading. The finite element method was used to handle the moving load and also the nonlinear characteristics of the problem. The simulation results were compared with the experimental results reported in the literature and also with the results obtained from an analytical model. Moreover, the cohesive element with traction-separation law was used for the crack growth modeling. The final part of the paper is devoted to comparisons between the numerical crack growth simulations obtained from the current work and the numerical results based on the CTOA criteria that were previously reported in the literature. The very good agreement between the two methods was indicative of the robustness of the implemented procedures. (this abstract seems a good description for this paper from the author point of view. please consider above text as abstract of this paper.)
Received: 2011/12/24 | Accepted: 2012/05/14 | Published: 2012/09/10
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |