Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Heat transfer enhancement is widely applicable in various industries, specifically in heat exchangers. Optimizing of heat transfer in the absence of increased pumping energy will result in increased of total efficiency in different systems. In this paper, forced convection heat transfer and fluid flow of fully developed laminar regime in a horizontal tube under uniform and non-uniform step heat fluxes is investigated experimentally. The effect of uniform, non-uniform increasing and decreasing applied heat fluxes on heat transfer and fluid flow are investigated. The effect of various parameters on heat transfer and fluid flow characteristics in these models are reported. Uncertainty analysis is performed and acceptable maximum of 1.8 percent is acquired. The primary results compared to well-known Shah and London equation for validation and maximum error of 8.5 percent is reported. In the present paper, Energy and exergy are two approach of analyzing. Convection heat transfer coefficient enhancement of 19.3 and 22.3 percent compared with model 1 are reported for model 2 and 3 respectively, in energy analysis. Furthermore, in this paper, exergy analysis is done and irreversibility values of 0.0887, 0.0803 and 0.1037 are reported for model 1, model 2 and model 3 respectively. Finally, it is concluded that the model number 3 is the best way to enhance heat transfer because of the maximum averaged Nusselt number and the minimum entropy generation values

Keywords: Heat flux, Heat transfer coefficient enhancement, Fluid flow, Exergy, Energy

Full-Text [PDF 1266 kb]   (4164 Downloads)    

Add your comments about this article : Your username or Email:

---