Volume 15, Issue 9 (11-2015)
Modares Mechanical Engineering 2015, 15(9): 78-86 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ahmadi Najafabadi M, Sedighi M, Salehi M, Hossini Toudeshky H. Investigation and monitoring of delamination in FMLs under mode I and II loading with FEM and AE. Modares Mechanical Engineering 2015; 15 (9) :78-86
URL: http://mme.modares.ac.ir/article-15-1874-en.html
URL: http://mme.modares.ac.ir/article-15-1874-en.html
Abstract: (4941 Views)
In this study the delamination behavior of FMLs loaded under mode I and II conditions is investigated by using numerical modeling and acoustic emission (AE) data analysis. Test samples is made of prepreg (glass/epoxy composite) and aluminum 2024-T3 (chromic acid anodized). Detection of delamination initiation moment is required for calculation of interlaminar fracture toughness in mode I and II which this moment is detected by using AE technic. Initiation and propagation of delamination is modeled by Abaqus software by using cohesive element. Load-displacement curve, progressive debonding and delamination face are the results taken from FEM and are compared with test results. Signal frequency processing is done for identifying delamination propagation and classification of fracture mechanism. Delamination mechanism is validated by Scanning electron microscope (SEM) images.
Article Type: Research Article |
Subject:
Composites
Received: 2015/06/12 | Accepted: 2015/07/13 | Published: 2015/07/29
Received: 2015/06/12 | Accepted: 2015/07/13 | Published: 2015/07/29
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |