Volume 19, Issue 4 (April 2019)                   Modares Mechanical Engineering 2019, 19(4): 901-910 | Back to browse issues page

XML Persian Abstract Print


1- Aerodynamic, Propulsion & Energy Conversion Department, Mechanical Engineering Faculty, Malek-Ashtar University of Technology, Shahinshahr, Iran
2- Aerodynamic, Propulsion & Energy Conversion Department, Mechanical Engineering Faculty, Malek-Ashtar University of Technology, Shahinshahr, Iran , kheradmand@mut-es.ac.ir
Full-Text [PDF 504 kb]   (2078 Downloads)    
Article Type: Original Research | Subject: Internal Combustion Engine
Received: 2018/05/19 | Accepted: 2018/11/19 | Published: 2019/04/6

References
1. Dec JE. Advanced compression-ignition engines-understanding the in-cylinder processes. Proceedings of the Combustion Institute. 2009;32(2):2727-2742. [Link] [DOI:10.1016/j.proci.2008.08.008]
2. Kim D, Bae Ch. Application of double-injection strategy on gasoline compression ignition engine under low load condition. Fuel. 2017;203:792-801. [Link] [DOI:10.1016/j.fuel.2017.04.107]
3. Kim K, Kim D, Jung Y, Bae Ch. Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine. Fuel. 2013;109:616-626. [Link] [DOI:10.1016/j.fuel.2013.02.060]
4. Varde KS, Popa DM. Diesel fuel spray penetration at high injection pressures. SAE Transactions. 1983;92:265-278. [Link] [DOI:10.4271/830448]
5. Hwang J, Park Y, Bae Ch, Lee J, Pyo S. Fuel temperature influence on spray and combustion characteristics in a constant volume combustion chamber (CVCC) under simulated engine operating conditions. Fuel. 2015;160:424-433. [Link] [DOI:10.1016/j.fuel.2015.08.004]
6. Canaan RE, Dec JE, Green RM, Daly DT. The influence of fuel volatility on the liquid-phase fuel penetration in a heavy-duty D.I. diesel engine. SAE Transactions. 1998;107:583-602. [Link] [DOI:10.4271/980510]
7. Payri R, García A, Domenech V, Durrett R, Plazas AH. An experimental study of gasoline effects on injection rate, momentum flux and spray characteristics using a common rail diesel injection system. Fuel. 2012;97:390-399. [Link] [DOI:10.1016/j.fuel.2011.11.065]
8. Javier López J, García-Oliver JM, García A, Domenech V. Gasoline effects on spray characteristics, mixing and auto-ignition processes in a CI engine under Partially Premixed Combustion conditions. Applied Thermal Engineering. 2014;70(1):996-1006. [Link] [DOI:10.1016/j.applthermaleng.2014.06.027]
9. Park Y, Hwang J, Bae Ch, Kim K, Lee J, Pyo S. Effects of diesel fuel temperature on fuel flow and spray characteristics. Fuel. 2015;162:1-7. [Link] [DOI:10.1016/j.fuel.2015.09.008]
10. Banerjee R, Kumar S. Numerical investigation of stratified air/fuel preparation in a GDI engine. Applied Thermal Engineering. 2016;104:414-428. [Link] [DOI:10.1016/j.applthermaleng.2016.05.050]
11. Hwang J, Park Y, Kim K, Lee J, Bae Ch. Improvement of diesel combustion with multiple injections at cold condition in a constant volume combustion chamber. Fuel. 2017;197:528-540. [Link] [DOI:10.1016/j.fuel.2017.02.049]
12. Kim D, Park SS, Bae Ch. Schlieren, Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition. International Journal of Automotive Technology. 2018;19(1):1-8. [Link] [DOI:10.1007/s12239-018-0001-8]
13. Lee CS, Park SW. Macroscopic structure and atomization characteristics of high-speed diesel spray. International Journal of Automotive Technology. 2003;4(4):157-164. [Link]
14. Baumgarten C. Mixture formation in internal combustion engines. 1rt Edition. Berlin: Springer; 2006. [Link]
15. Poroseva SV, Bézard H. On ability of standard k-Ɛ model to simulate aerodynamic turbulent flows. Computational Fluid Dynamics Journal. 2001 Jan;627-633. [Link]
16. Jiang X, Siamas GA, Jagus K, Karayiannis TG. Physical modelling and advanced simulations of gas-liquid two-phase jet flows in atomization and sprays. Progress in Energy and Combustion Science. 2010;36(2):131-167. [Link] [DOI:10.1016/j.pecs.2009.09.002]
17. Challen B, Baranescu R. Diesel engine reference book. 2nd Edition. Oxford: Butterworth-Heinemann; 1999. [Link]
18. Faeth GM, Hsiang LP, Wu PK. Structure and breakup properties of sprays. International Journal of Multiphase Flow. 1995;21(Supplement):99-127. [Link] [DOI:10.1016/0301-9322(95)00059-7]
19. Reitz RD, Bracco FV. Mechanism of atomization of a liquid jet. Physics of Fluids. 1982;25:1730-1742. [Link] [DOI:10.1063/1.863650]
20. Solsjö R, Bai XS. Injection of fuel at high pressure conditions: Les study. 10th International Conference on Engines & Vehicles, 11-15 September, 2011, Capri, Napoli. Warrendale: SAE International; 2011. [Link]
21. Patterson MA, Reitz RD. Modeling the effects of fuel spray characteristics on diesel engine combustion and emission. SAE International Congress & Exposition, 23-26 February, 1998, Detroit, Michigan. Warrendale: SAE International; 1998. [Link] [DOI:10.4271/980131]
22. Sazhin SS, Abdelghaffar WA, Sazhina EM, Heikal MR. Models for droplet transient heating: Effects on droplet evaporation, ignition, and break-up. International journal of thermal sciences. 2005;44(7):610-622. [Link] [DOI:10.1016/j.ijthermalsci.2005.02.004]
23. O'Rourke PJ. Collective drop effects on vaporizing liquid sprays [Dissertation]. Princeton: Princeton University; 1981. [Link]
24. Settles GS. Schlieren and shadowgraph techniques: Visualizing phenomena in transparent media. 1rt Edition. Berlin: Springer-Verlag GmbH; 2001. [Link] [DOI:10.1007/978-3-642-56640-0]
25. Siebers DL. Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization. SAE International Congress & Exposition, 23-26 February, 1998, Detroit, Michigan. Warrendale: SAE International; 1999. [Link] [DOI:10.4271/1999-01-0528]
26. Siebers DL. Liquid-phase fuel penetration in diesel sprays. SAE International Congress & Exposition, 23-26 February, 1998, Detroit, Michigan. Warrendale: SAE International; 1998. [Link] [DOI:10.4271/980809]

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.