Volume 18, Issue 9 (2019)                   Modares Mechanical Engineering 2019, 18(9): 207-216 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nasiri S, Talebi S, Salimpour M. The effect of grooved surfaces on pool boiling heat transfer of water and Fe3O4/water nanofluid. Modares Mechanical Engineering. 2019; 18 (9) :207-216
URL: http://journals.modares.ac.ir/article-15-24223-en.html
1- Department of Mechanical Engineering, Yazd University, Yazd, Iran.
2- Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran.
Abstract:   (1227 Views)
Investigating of boiling process is one of the attractive fields for researchers, because of many applications in industry such as heat exchangers and air condition systems. One of the important and effective factors in pool boiling heat transfer is the heating surface geometry. In present article, pool boiling of dionized water and Fe3O4/water nanofluid at atmospheric pressure have been analyzed on smooth and grooved copper surfaces, experimentally. The effect of rectangular, circular and triangular grooves with the same pitch on boiling heat transfer is the main aim of present article. The results have showed that the boiling heat transfer coefficient of dionized water in circular and rectangular grooved surfaces has enhanced 92% and 48.9%, respectively, and has reduced 33.1% in triangular grooved surface toward the smooth surface. Also, the boiling heat transfer coefficient of Fe3O4/water nanofluid in circular grooved surfaces has increased 40.7% and has decreased 21.8% and 88.7% in rectangular and triangular grooved surfaces, respectively, toward the smooth surface. The corners existence in rectangular and triangular geometries causes thermal resistance increasing and heat transfer coefficient decreasing toward circular geometry. Also, the groove area, the mechanism of bubbles creation and nanoparticles deposition content on different surfaces are effective on the boiling heat transfer. For investigation of depth effect, the grooves depth was increased in different geometries. By adding depth, the boiling heat transfer coefficient of water and nanofluid has increased up to 43.5% and 40.6%, respectively, because of heat transfer surface and nucleation sites density augmentation.
Full-Text [PDF 4811 kb]   (464 Downloads)    

Received: 2018/08/18 | Accepted: 2018/08/18 | Published: 2018/08/18

Add your comments about this article : Your username or Email: