Volume 20, Issue 1 (January 2020)
Modares Mechanical Engineering 2020, 20(1): 215-225 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Pourahmadi S, Talebi S. Hydrodynamic Simulation of Two Phase Flow in an Industrial Electrowinning Cell. Modares Mechanical Engineering 2020; 20 (1) :215-225
URL: http://mme.modares.ac.ir/article-15-26941-en.html
URL: http://mme.modares.ac.ir/article-15-26941-en.html
1- Mechanical Engineering Department, Yazd University, Yazd, Iran
2- Mechanical Engineering Department, Yazd University, Yazd, Iran ,talebi_s@yazd.ac.ir
2- Mechanical Engineering Department, Yazd University, Yazd, Iran ,
Abstract: (3155 Views)
Electrowinning is the process of copper deposing from the intracellular electrolyte solution to the cathode by creating an electric current. In the present study, the hydrodynamic simulation of the electrowinning cell of Miduk Copper Complex is studied using computational fluid dynamics. Ansys-CFX software is used for this modeling. Navier Stokes and continuity equations are considered as the two-phase fluid and gas, turbulent, incompressible and steady states and the equation for copper concentration in the electrolyte will be solved with consideration of its specific boundary condition. Turbulence will be modeled using the k-ω method. The general and local simulations have been used together due to the large variation in the properties, close to the cathode and anode, and the large volume of the cell, to create a good mesh and increase the speed and accuracy of the solution. First, in general simulation, the entire geometry of the cell is modeled by creating a suitable mesh. Then in the local simulation, only the volume between the two cathodes of the cell is considered and modeled with higher precision. Data on boundary conditions in the local simulation of interface boundary are obtained with general simulation data, which increases the accuracy of modeling. Comparison of the results of general and local simulations shows an accuracy of up to 30% in close to the electrodes. The results of this simulation are the velocity vector, the concentration of acid and copper, the turbulence intensity, pressure and the volume fraction of the oxygen phase in the whole of the electrowinning cell. Finally, the model has been validated by experiments on the real cells. The results show the high accuracy of this modeling technique with less than 2.5% deviation.
Keywords: Hydrodynamic Simulation, Computational Fluid Dynamics, Electrowinning Cell, General and Local Simulation, Experimental Validation
Article Type: Original Research |
Subject:
Two & Multi Phase Flow
Received: 2018/11/7 | Accepted: 2019/05/4 | Published: 2020/01/20
Received: 2018/11/7 | Accepted: 2019/05/4 | Published: 2020/01/20
References
1. Al Shakarji R. Mechanisms of acid mist formation in electrowinning [Dissertation]. Townsville: James Cook University; 2012. [Link]
2. Filzwieser A, Hein K, Mori G. Current density limitation and diffusion boundary layer calculation using CFD method. JOM. 2002;54(4):28-31. [Link] [DOI:10.1007/BF02701653]
3. Leahy MJ, Schwarz MP. Experimental validation of a computational fluid dynamics model of copper electrowinning. Metallurgical and Materials Transactions B. 2010;41(6):1247-1260. [Link] [DOI:10.1007/s11663-010-9432-y]
4. Schwarz MP. Improving zinc processing using computational fluid dynamics modelling-successes and opportunities. Minerals Engineering. 2012;30:12-18. [Link] [DOI:10.1016/j.mineng.2012.02.005]
5. Leahy MJ, Schwarz MP. Flow and mass transfer modelling for copper electrowinning: Development of instabilities along electrodes. Hydrometallurgy. 2014;147-148:41-53. [Link] [DOI:10.1016/j.hydromet.2014.04.010]
6. Najminoori M, Mohebbi A, Ghadami Arabi B, Daneshpajouh Sh. CFD simulation of an industrial copper electrowinning cell. Hydrometallurgy. 2015;153:88-97. [Link] [DOI:10.1016/j.hydromet.2015.02.005]
7. Kemminger A, Ludwig A. Modelling the electrolyte flow in a full-scale copper electrorefining tankhouse cell. European Metallurgical Conference EMC, 2013 June 23-26, Weimar, Germany. Clausthal-Zellerfeld: GDMB; 2013. pp. 795-806. [Link]
8. König J, Mühlenhoff S, Eckert K, Büttner L, Odenbach S, Czarske J. Velocity measurements inside the concentration boundary layer during copper-magneto-electrolysis using a novel laser Doppler profile sensor. Electrochimica Acta. 2011;56(17):6150-6156. [Link] [DOI:10.1016/j.electacta.2011.04.034]
9. Geankoplis CJ. Transport processes and separation process principles. Plano: Prentice Hall Professional Technical Reference; 2003. [Link]
10. Pourtousi M, Sahu JN, Ganesan P, Shamshirband Sh, Redzwan G. A combination of computational fluid dynamics (CFD) and adaptive neuro-fuzzy system (ANFIS) for prediction of the bubble column hydrodynamics. Powder Technology. 2015;274:466-481. [Link] [DOI:10.1016/j.powtec.2015.01.038]
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |