Volume 14, Issue 16 (2015)                   Modares Mechanical Engineering 2015, 14(16): 143-151 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nazari M B, Asemi O. Stress intensity factor for a longitudinal semi-elliptical crack in a thick-walled cylinder under hyperbolic thermal loading. Modares Mechanical Engineering. 2015; 14 (16) :143-151
URL: http://journals.modares.ac.ir/article-15-5788-en.html
Abstract:   (2787 Views)
In this paper, the stress intensity factor for a longitudinal semi-elliptical crack in the internal surface of a thick-walled cylinder is derived analytically and numerically. The cylinder is assumed enough long and subjected to the axisymmetric cooling thermal shock on the internal surface. The uncoupled thermoelasticity governing equations for an uncracked cylinder are solved analytically. The non-dimensional hyperbolic heat equation is solved using separation of variables method. The weight function method is implemented to obtain the stress intensity factor for the deepest and surface points of the crack. Results show the different behavior of the crack under hyperbolic thermal shock. At a short time after the thermal shock, the stress intensity factor at the deepest point –especially for shallow cracks- for hyperbolic model is significantly greater than Fourier one. The stress intensity factor at the deepest point is greater as the crack is narrower for both models. Unlike mechanical loading, the greatest stress intensity factor may occur at the surface point. According to the results, assumption of adequate heat conduction model for structure design under transient thermal loading is critical.
Full-Text [PDF 698 kb]   (2438 Downloads)    
Article Type: Research Article | Subject: Creep, Fatigue & Failure
Received: 2014/04/7 | Accepted: 2014/04/26 | Published: 2014/11/1

Add your comments about this article : Your username or Email:
CAPTCHA