Volume 14, Issue 3 (6-2014)                   Modares Mechanical Engineering 2014, 14(3): 103-109 | Back to browse issues page

XML Persian Abstract Print


Abstract:   (5734 Views)
Abstract- In this study, mechanical and thermal properties of nanocomposites based on polypropylene/ linear low density polyethylene/ nano titanium dioxide (PP/LLDPE/Tio2) were studied. The samples were produced using a co-rotating twin screw extruder including 0,2,4 Wt.% of nano particles, 20,40,60 Wt.% of LLDPE and styrene-ethylene-butylene-styrene(SEBS) as comptabilizer. Tensile properties (modulus, tensile strength and elongation at break), impact resistance and thermal properties (meltingand crystallization temperatures) were evaluated. The results showed that modulus was increased by 9% with addition of nano particles in comparison to PP/LLDPE. In addition, impact resistance was increased and tensile strength and elongation at break were decreased. Melting and crystallization temperatures of PP were increased less or more while, these temperatures for LLDPE did not show meaningful differences.
Full-Text [PDF 1476 kb]   (7116 Downloads)    
Article Type: Research Article | Subject: Micro & Nano Systems|Composites
Received: 2013/08/22 | Accepted: 2013/10/16 | Published: 2014/05/17

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.