1027-5940 :pISSN

2476-6909 :eISSN

Modares Mechanical Engineering

  • Editor-in-Chief: Mohamad Javad Nateq
  • Publication Period: Monthly
  • This is an Open Access Journal
Modares Mechanical Engineering is one of the TMU Press journals that is published by the responsibility of its Editor-in-Chief and Editorial Board in the determined scopes.
The Journal of Modares Mechanical Engineering is a multi-disciplinary, peer-reviewed journal covering all areas in mechanical engineering. This journal is published in 12 issues per year. All articles published by journal are made freely and permanently accessible online immediately upon publication, without subscription charges or registration barriers.
Peer-review process
All submitted articles are evaluated at the submission to meet the structural and subject principles of Modares Mechanical Engineering. The matched articles will gone under a double-blinded peer-review process by at least 3 reviewers (expert in the field who are not part of the journal’s editorial staff) who are selected by the Editorial Board members according to their field specialties. The Editorial Board members have the final responsibility to select the articles.
Governing body
Modares Mechanical Engineering is under the scientific control of Editorial Board whose members are recognized experts in the subject areas included within the journal’s scope. Some executive roles of the Editorial Board members are delegated to the Editor-in-Chief who is well-known in the journal’s scope.
Editorial team
Modares Mechanical Engineering is under the scientific supervision of the Editorial Team whose members are all experts with high number of publications in their field.
Author fees/Access
There are No Fees or Charges at all for submission, reviewing and publishing processes in Modares Mechanical Engineering.
Modares Mechanical Engineering follows the Bethesda Statement on Open Access Publishing.
The content of Modares Mechanical Engineering is under the Creative Commons Attribution-NonCommercial 4.0 International Public License. To the extent this Public License may be interpreted as a contract, we are granted the Licensed Rights in consideration of your acceptance of these terms and conditions, and the Licensor grants you such rights in consideration of benefits the Licensor receives from making the Licensed Material available under these terms and conditions.
Process for identification of and dealing with allegations of research misconduct
Publisher and editors of Modares Mechanical Engineering are reasonable to identify and prevent the publication of papers where research misconduct has occurred, including plagiarism, citation manipulation, and data falsification/fabrication, among others. In doing so, Modares Mechanical Engineering follows COPE’s guidelines in dealing with allegations.
Ownership and management
Modares Mechanical Engineering is owned by Tarbiat Modares University, Iran, and is managed and published by YektaPub Co.
Conflicts of interests
All Modares Mechanical Engineering Editorial Board members and the Editor-in-Chief submitted articles are gone under the same reviewing process as the other authors gone. In the cases that a reviewer suspects undisclosed conflict of interest in a submitted manuscript or a reader suspects undisclosed conflict of interest in a published article (all authors are filling the ICMJE Form for Disclosure of Potential Conflicts of Interest at the submission time) Modares Mechanical Engineering will follow COPE’s guidelines.
Revenue sources/Advertising/Direct marketing
Modares Mechanical Engineering is financially supported completely by Tarbiat Modares University, Iran, and has no other sources for earning funds. Modares Mechanical Engineering accepts No advertisements in the site or even as a report article.
Publishing schedule/Archiving
Modares Mechanical Engineering is published 4 issues per year. All the content from the beginning to the end will be available for ever on Modares Mechanical Engineering exclusive website. Also Modares Mechanical Engineering is included at EBSCOhost and has the plan to enter to Scopus and Thomson-Reuters databases.


This license lets others remix, tweak, and build upon your work non-commercially, and although their new works must also acknowledge you and be non-commercial, they don’t have to license their derivative works on the same terms.
View License Deed | View Legal Code

Liaghat, Golamhosaen; Professor of - 
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: ghlia530@modares.ac.ir​
Tel: -
Maerefat, Mehdi; Prof. of - 
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: sardabir.mme@gmail.com​
Tel: -
Editorial Board

Ashgarz, Nasser;Professor of Mechanical Engineering
Affiliation: University of Toronto, Toronto, Canada
Email: ashgriz@mie.utoronto.ca
Tel: -
Liaghat, Gholam Hossein; Professor -
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: ghlia530@modares.ac.ir
Tel: -
Moslemi Nayini, Hasan; Professor -
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: moslemi@modares.ac.ir
Tel: -
Mazaheri, Kiumars; Professor -
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: kiumars@modares.ac.ir
Tel: -
Marefat, Mehdi; Professor -
Affiliation: Tarbiat Modares University, Tehran, Iran
Email: sardabir.mme@gmail.com
Tel: -
Mousavian, Seyed Ali Akbar; Professor -
Affiliation: K.N. Toosi University, Tehran, Iran
Email: moosavian@kntu.ac.ir
Tel: -
Shokriye, Mahmoud Mehrdad; Professor -
Affiliation: Iran University of Science and Technology, Tehran, Iran
Email: shokrieh@iust.ac.ir
Tel: -
Naderan Tahan, Khosro; Professor -
Affiliation: Shahid Chamran University of Ahvaz, Ahwaz, Iran
Email: naderan_k@scu.ac.ir
Tel: -
Narimanzadeh, Nader; Professor -
Affiliation: Gilan University, Gilan, Iran
Email: nnzadeh@guilan.ac.ir
Tel: -
Houman, Kamel; Associate Professor -
affiliation: University of Queensland, Brisbane, Australia
Email: k.hooman@uq.edu.au
Tel: -

Guide for Authors

Ethics in publishing 
For information on Ethics in publishing for journal publication please see


 Submission declaration 

Submission of an article implies that the work described has not been published previously, that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in Persian or in any other language, without the written consent of the copyright-holder.


Open Access 

All articles published by Journal are made freely and permanently accessible online immediately upon publication, without subscription charges or registration barriers.

• Articles are made available on-line for everyone to read and download through our access programs http://mme.modares.ac.ir/

• No publication fee

All articles published in journal will be of charge for the authors.


Please write your full text in Persian. The full title, abstract and author information should be provided in English.


Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.

Submit your article 
Please submit your article via http://mme.modares.ac.ir/author


Please submit, with the manuscript, the names, addresses and e-mail addresses of five potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.

 Changes to authorship 

This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will not accept.


Use of wordprocessing software 
It is important that the file be saved in the native format of the wordprocessor used. The text should be prepared based on the journal template available in:


 Article structure

The structure of the article should be based on the journal template available in:



Submission checklist 

The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item. 
Ensure that the following items are present: 
One author has been designated as the corresponding author with contact details: 
• E-mail address 
• Full postal address 
• Phone numbers 
• Manuscript has been prepared based on the journal template 
• References are in the correct format for this journal 
• All references mentioned in the Reference list are cited in the text, and vice versa 
• Permission has been obtained for use of copyrighted material from other sources


    Investigation of formability of three-layered brass-IF steel-brass composite
    Alireza Bagheri, Mohammad Reza Toroghinejad, Aboozar Taherizadeh

    Numerical simulation of projectile penetration on fuel filled tank and comparing with experimental method
    Hasan Mansoori,

    An Experimental and numerical investigation on low velocity impact properties of sandwich panels with bilateral connection
    Shidokht Rashiddadash, mojtaba sadighi,

    Optimization of geometrical parameters in a lead-acid battery using response surface method to access of maximum capacity, minimum charge-time and minimum temperature rise
    Tayyeb Nazghelichi, Farschad Torabi, Vahid Esfahanian

    Exergy analysis of a new proposal combined cycle from Sabalan geothermal source
    mehran abdolalipouradl, Shahram Khalilarya, samad jafarmadar

    2D Simulation of a wedge impact problem into the Newtonian and Herschel Bulkley Dilatant non-Newtonian fluids, using WCSPH method
    jafar gerdabi, Amir H. Nikseresht

    Numerical Simulation of the effect of passive control method by changing tip geometry on the performance of the axial turbine
    sarallah Abbasi, Afshin Gholamalipoor

    Investigation of mass effect and reaction terms on the prediction of brain tumor growth by using mathematical model based on MRIs
    Nargess Meghdadi, Hanieh Niroomand-Oscuii, Madjid Soltani

    Study of viscoelastic characteristics and hysteresis loop of carbon nanotube polymer matrix composites
    mojtaba haghgoo, Reza Ansari, Abolfazl Darvizeh, mohammad kazem Hassanzadeh-Aghdam

    Experimental Investigation on Parameters Affecting the Directional Sensitivity of Hot Wire Anemometer
    Saeed Farsad, Mohammed Ali Ardekani, Foad Farhani

    Experimental study on the parameters affecting behavior of glass/epoxy composite tubes under axial impact loading
    omid Najafzade Asl, Mohammad Hossein Pol, Nabiollah Rezaei Golshan

    Numerical Study on The Impact of Pore Geometry Extension on Dead-Ended Fouling Characteristics of Non-Colloidal Particles
    Ehsan Davarpanah, Ali Reza Teymourtash

    Experimental and numerical investigation of car intercooler at non-uniformity of velocity and temperature conditions
    Mohammad Sadegh Bordbar, ali shayegh, , Mohsen Agha Seyed Mirzabozorg

    Using of state-space approach to predict deflection of nanobeams
    Babak Safaei, A. M. Fattahi

    Investigation of the effects of steam addition on the conceptual design and pollutants emission of the gas turbine combustor
    morteza habibi, Fathollah Ommi, zoheir saboohi

    Computation of flow and heat transfer over dimpled channels using low-Reynolds number turbulence models
    Mohammad Fazli,

    Nonlinear computer-aided tolerance analysis of mechanical assemblies using improved second-order method
    Omid Sadikhani, Seyed Ali Hashemian

    Design and field evaluation of a combined double-axis solar tracker
    mehrad aref, Kazem Jafarinaeimi, Hamid Mortezapour, Mostafa Jafari Keranipour

    A finite element analysis for shape memory polymer beams considering geometric non-linearity
    Pouya Fahimi, Mostafa Baghani, Ghader Faraji

    Vibration of graphene sheets with axial force effect in elastic medium based on nonlocal elasticity and third-order shear deformation theory
    Ahmad Ghasemi Ghalebahman, Ali Khakbaz

    An Algorithm for 3D Defect Positioning in the Case of Coplanar Transducers in Ultrasonic Time-of-Flight Diffraction Technique
    Ali Habibpour-Ledari, Farhang Honarvar

    Topology Optimization Study in Energy Absorption of Lattice-core Sandwich Beams under Three-point Bending Test
    hossein taghipoor, mohammad damghani noori

    Coupling of the VOF and the two-fluid models for the numerical investigation of aerated stepped spillway
    mohamadreza ansari, Mahdi Esmailpour

    Estimation of stress concentration factor of circular hole in orthotropic plate using a new model based on regression method
    ali abbasnia, Mohammad Jaffari, Abbas Rohani

    Control of a wheeled robot in presence of sliding of wheels using adaptive backstepping method
    Ali Keymasi Khalaji, Mostafa Jalalnezhad

    Three dimensional analysis of temperature-dependent nonlinear mechanical behaviors of functionally graded rectangular plates resting on Winkler–Pasternak elastic foundation
    Y. Gholami, Reza Ansari

    Extending Reynolds Number range in numerical simulation Of fluid flow using Boundary Element Method
    Ghassem Heidarinejad, amir yousefi

    Experimental investigation of pressurized steel pipes with mechanical defect under axial compression
    morteza Naghipour, Mehdi Ezzati, Majid Elyasi

    Experimental measurements and finite element residual stress caused by welding aluminum sheets and investigating its effect on natural frequency values
    hussain gharehbaghi,

    Finite element modeling of failure in IV type composite pressure vessel using WCM plug-in in ABAQUS software
    Mohammad Heidari-Rarani, Mohsen Ahmadi-Jebeli

    Experimental investigation of the effects of work piece hardness and abrasive particle size in rotational abrasive flow Machining
    , Ali asghar amini khasraghi, Ahad Gholipoor

    Nonlinear Model Predictive Multivariable Control for Trajectory Tracking of a Type of Delta-Parallel Robot
    mahmood mazare, mostafa taghizadeh, mahdi pourgholi

    Prediction of the critical buckling load of stiffened composite cylindrical shells with lozenge grid based on the nonlinear vibration analysis
    davoud shahgholian ghahfarokhi, G. H. Rahimi

    Important combustion species detection by flame natural emission spectroscopy in perforated burner
    Hossein Soltanian, Mohammad Zabetian, Hadi Pasdarshahri

    Numerical simulation and optimum operational point determination of a downdraft gasfier regarding pollutant emissions
    ali bahari, , javad mahmoudimehr

    Evaluation of the effects of a combined severe plastic deformation method on the hot deformation behavior of Mg-3Al-1Zn magnesium alloy
    M. Eftekhari, Ali Fata, , M. Mosavi

    Increase the stability of an articulated long vehicle by active disturbance rejection backstepping sliding mode control method
    naser esmaili, , hamed Hamed tabatabaei oreh

    Investigation, sensitivity analysis and multi objective optimization of effective parameters on temperature in robotic drilling bone
    M. Ghoreishi, Mojtaba zolfaghari, Vahid Tahmasbi, Hamed Heydari

    Study on the effect of heat sinks layout and air flow pattern through the fins on thermal performance of thermoelectric air-handling units
    Farhad Hadian fard, Amir Omidvar, Mohammad Naserian

    Saddle place effect on the leg joints range of motion and muscles contraction velocity in ergometer: parametric study
    Elham Hazrati, Mahmood Azghani

    Numerical simulation of FHD micro pump using magnetic field of permanent magnet
    , Mohammad Mehdizadeh youshanloei

    The effect of lubrication type on tool temperature and wear in turning of AISI 304 steel
    Aref ُSaliminia, Mohammad Mahdi Abootorabi Zarchi

    An experimental energy and exergy analysis of uniform and step heat flux effects on heat transfer over of circular cross-section tube
    Abazar Abadeh, , Mohammad javad Maghrebi

    Health monitoring of an arch concrete dam using a combined effective method in the time-frequency domain
    majid damadipour, Reza Tarinejad

    Analysis of the laser welding parameters of stainless steel foil by statistical response surface methodology for joining PEMFC bipolar plates
    Mohammad Reza Pakmanesh, Morteza Shamanian, Saeid Asghari

    Damage assessment of mode II of polymer composite material using a new acoustic emission and finite element methods
    mahdi habibi, jalal yousefi,

    Detection and Accurate Estimation of Geometrical Parameters of Defects on the Internal Surfaces of Pipes Using Inverse Heat Conduction Method
    Mojtaba Darroudi, Farshad Kowsary

    Modal identification of structural systems using an effective method based on combining the transmissibility and wavelet transform
    Majid Damadipour, Reza Tarinejad, Mohammad Hossein Aminfar