TY - JOUR JF - mdrsjrns JO - Modares Mechanical Engineering VL - 19 IS - 1 PY - 2019 Y1 - 2019/1/01 TI - Numerical Simulation of Droplet Falling and Positioning on Surface Using Multiphase Lattice Boltzmann Model TT - شبیه‌سازی عددی سقوط و قرارگیری قطره بر روی سطح با استفاه از مدل چندفازی روش شبکه بلتزمن N2 - Shan-Chen model is the most common model for simulation of multiphase flows using lattice Boltzmann method. The entire multiphase Lattice Boltzman models are limited to regimes, where the temperature dynamics are either negligible or their effects on the flow are unimportant. The entire multiphase LBE models are limited to regimes where the temperature dynamics are either negligible or their effects on the flow are unimportant. The multiphase isothermal lattice Boltzmann equation (LBE) model and single phase thermal LBE (TLBE) model were described. In this research, by combining these two models, the thermal two-phase LBE model was proposed. The coupling of the two models is through a suitably defined body force term. Due to the external nature of this coupling, the new model will have the same stability as the isothermal two-phase model. For this purpose, the scalar thermal model was initially neutral and, then, the Shan-Chen model was expressed in homogeneous state. Also, droplet falling on a heated solid surface and positioning droplet on heated solid surface in different Rayleigh and Reynolds number and different diameter size of droplet were considered. Results show that the temperature in the multiphase flow, as a barrier, delays achieving a stable state, and the fake speed created at the interface area in the temperature field also affects. SP - 171 EP - 179 AU - Bolandi Kashani, A.H. AU - Nobakhti, M.H. AU - Khayat, M. AD - Mechanical Engineering Department, Science & Research Branch, Islamic Azad University, Tehran, Iran KW - Lattice-Boltzmann method KW - Shan-Chen model KW - Thermal Multiphase flow KW - Droplet on heated solid surface UR - http://mme.modares.ac.ir/article-15-20617-en.html ER -