TY - JOUR JF - mdrsjrns JO - Modares Mechanical Engineering VL - 14 IS - 15 PY - 2015 Y1 - 2015/3/01 TI - Production of Bilayer Al/St Tubes by Cold Spin Bonding and Investigation of Different Parameters on Bonding Strength of Layers TT - تولید لوله های دولایه فولاد/آلومینیوم با استفاده از اتصال چرخشی سرد و بررسی اثر پارامترهای مختلف بر استحکام اتصال لایه ها N2 - Spin-bonding is a method for fabrication of bilayer tubes based on flow-forming process. This new method is a process with high potential in production of seamless thin-walled tubes. Utilizing this process, aluminum tube (as the inner layer or clad layer) has been bonded into steel tube (as the outer layer) to fabricate tubular laminate composites. As important parameters for creating a suitable bond, effects of thickness reduction, initial aluminum thickness and strength on bonding strength were investigated. The bond strength was evaluated by peel test and the peeled surfaces were examined using scanning electron microscopy (SEM). The results indicated that thickness reduction has great influence on strength and quality of the bond. After a threshold reduction (about 35%) the bond strength increases rapidly with the amount of deformation, until it approaches the weaker metal strength, and samples fracture from the base metal in the peel test. Approaching the strength of the two metals and decreasing the initial thickness of the clad layer, with a high amount of deformation increased the bonding strength. Fracture surface images showed that the surface fraction of bonding area was increased when deformation increased. It was also increased with the reduction of the initial thickness of the clad layer and when the strength of the two layers approached each other. Additionally, distribution and shape of the fracture area changed from a disordered fibril structure to approximately straight area, with an increase in the deformation. SP - 111 EP - 118 AU - Samandari, Mohammad Mahdi AU - Abrinia, Karen AU - Akbarzadeh, Abbas AD - KW - Spin-Bonding KW - Bonding Strength KW - Peeling KW - Flow-Forming UR - http://mme.modares.ac.ir/article-15-505-en.html ER -