TY - JOUR T1 - Stress intensity factor calculation for surface crack in a family of thin and thick rotating disks using two dimensional weight functions TT - محاسبه ضریب شدت تنش ترک‌های سطحی در یک خانواده از دیسک‌های دوار نازک و ضخیم با استفاده از تابع وزن دو بعدی JF - mdrsjrns JO - mdrsjrns VL - 15 IS - 12 UR - http://mme.modares.ac.ir/article-15-7431-en.html Y1 - 2016 SP - 84 EP - 94 KW - Rotating disk KW - Two-dimensional weight function KW - Stress Intensity Factor KW - Surface crack N2 - A family of rotating disks used in Iranian turbine and compressor industry is investigated. Mechanical and thermal loads due to working condition would lead to the crack initiation in the inner surface of the disk. The aim of this paper is the development of the two-dimensional weight function for the rotating disks containing semi-elliptical longitudinal cracks. The general form of the two-dimensional weight function is related to the proposed weight functions for embedded cracked domain in literature. In order to determine the unknown coefficient of the weight function, the reference stress intensity factors for cracked geometry subjected to reference loads are calculated. The analysis indicated that the results are independent of the number of terms in proposed weight function expansion. Extracting the weight function for disks with from 90 to 420 mm thickness enables one to predict the stress intensity factor for cracks in the structure subjected to arbitrary loading. The stress intensity factor for each point on the crack front subjecting to one or two dimensional loads would be calculated using the derived weight function. The results reveal that the increasing of the height to thickness ratio in rotating disks leads to the increase of the stress intensity factor for high depth ratio crack ones. Results show that the configuration of the disk sections affects the stress intensity factors of the same aspect ratio cracks in the structures. The comparison of the results obtained from the weight function method and those obtained with FEM are in good agreement. M3 ER -