TY - JOUR T1 - Analysis of composite sandwich beam with enhanced nonlinear high order sandwich panel theory TT - تحلیل رفتار خمشی تیر ساندویچی با رویه های کامپوزیتی با استفاده از تئوری مرتبه بالای غیر خطی ارتقاء یافته JF - mdrsjrns JO - mdrsjrns VL - 14 IS - 16 UR - http://mme.modares.ac.ir/article-15-799-en.html Y1 - 2015 SP - 1 EP - 8 KW - High order sandwich panel theory KW - Large Deformation KW - Finite strain KW - Experimental study N2 - A novel geometrically nonlinear high order sandwich panel theory considering finite strains of sandwich components is presented in this paper. The equations are derived based on high order sandwich panel theory in which the Green strain and the second Piola-Kirchhoff stress tensor are used. The model uses Timoshenko beam theory assumptions for behavior of the composite face sheets. The core is modeled as a two dimensional linear elastic continuum that possessing shear and vertical normal and also in-plane rigidities. Nonlinear equations for a simply supported sandwich beam are derived using Ritz method in conjunction with minimum potential energy principle. After obtaining nonlinear results based on this enhanced model, simplification was applied to derive the linear model in which kinematic relations for face sheets and core reduced based on small displacement theory assumptions. A parametric study is done to illustrate the effect of geometrical parameters on difference between results of linear and nonlinear models. Also, to verify the analytical predictions some three point bending tests were carried out on sandwich beams with glass/epoxy face sheets and Nomex cores. In all cases good agreement is achieved between the nonlinear analytical predictions and experimental results. M3 ER -