TY - JOUR T1 - Effect of Micro structure on Acoustic Softening of CK45 Steel TT - تاثیر میکرو ساختار فولاد CK45 بر وقوع پدیده نرم شدگی آکوستیکی. JF - mdrsjrns JO - mdrsjrns VL - 18 IS - 9 UR - http://mme.modares.ac.ir/article-15-16168-en.html Y1 - 2018 SP - 33 EP - 39 KW - Ultrasonic vibration KW - Tensile Test KW - Acoustic Softening KW - microstructure N2 - Vibration waves with frequencies greater than 20 kHz, known as ultrasonic vibrations, are used in many manufacturing and engineering processes. This paper studies the occurrence of acoustic softening in steel specimens with three different microstructures. For this purpose, specimens with bainite and martensitic microstructures were created by Austempering and Quench heat treatments. The final dimensions of these specimens were obtained with Modal finite element analysis using ANSYS software so that the resonance frequency of the specimen is equal to the resonance frequency of transducer. Given that ultrasonic vibration induces a tension called vibrational stress to the crystal, this stress causes movement of dislocations and reduces the yield strength of specimens. In this paper 55 w / cm2 ultrasonic vibration, 18%, 12% and 8% yield strengths of specimens are reduced with ferrite- perlite, bainite and martensitic microstructure. Due to the absorption of vibrational energy by dislocation, the metal forming of these materials takes place with less energy. Also, in this paper, a numerical model for acoustic softening was investigated and it was found that there is a good correlation between numerical modeling and experimental e results. M3 ER -