Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1394
10
1
gregorian
2016
1
1
15
11
online
1
fulltext
fa
بررسی اثر موقعیت الکترودها بر روی شکلپذیری و توزیع ضخامت ورقهای فلزی در روش شکلدهی الکتروهیدرولیک آزاد
Investigation of the effect of electrodes position on formability and thickness distribution of sheet metals in electrohydraulic free-forming
شکلدهی الکتروهیدرولیک یک فرآیند شکلدهی سریع است که در آن انرژی الکتریکی ذخیره شده در خازنها بین دو الکترود مستغرق در آب تخلیه میشود. تخلیه الکتریکی با تبخیر آب در محل تخلیه موج فشاری ایجاد میکند که از طریق آب به ورق منتقل شده، موجب شکلدهی آن میگردد. یکی از پارامترهای مهم در طراحی بهینه فرایند شکلدهی الکتروهیدرولیک تعیین محل مناسب الکترودها میباشد. در این تحقیق با استفاده از شبیهسازی المان محدود اثر موقعیت الکترودها در فرایند شکلدهی الکتروهیدرولیک در حالت شکلدهی الکتروهیدرولیک آزاد بررسی شده است. ابتدا چند نمونه از آزمایشات تجربی موجود در مقالات، با استفاده از نرمافزار المان محدود آباکوس شبیه سازی شده، نتایج شبیه سازی با نتایج تجربی موجود مقایسه گردید که نشاندهنده توافق قابل قبول نتایج مدلسازی و نتایج تجربی میباشد. پس از صحهگذاری نتایج شبیهسازی، با تغییر محل الکترودها، اثر موقعیت الکترودها بر روی شکلپذیری قطعه و توزیع ضخامت در قطعه نهایی بررسی شده است. نتایج نشان میدهد که امکان شکلدهی قطعه تنها در موقعیتهای محدودی از الکترودها وجود دارد و در محفظهی شکلدهی میتوان محلی را برای الکترودها پیدا کرد که ضمن آن که توزیع ضخامت قطعه را یکنواختتر میکند، احتمال پارگی قطعهکار را نیز کاهش میدهد.
Electrohydraulic forming (EHF) is a high velocity forming process in which the electric energy stored in the capacitors are suddenly discharged between two electrodes submerged in a water-filled chamber. During the discharge, the water between the electrodes vaporizes and creates a shock wave that is transferred to the blank using the water and forms it. One of the key parameters in electrohydraulic forming is the determination of the suitable position of the electrodes. In this research the effect of electrodes position in electrohydraulic free-forming is investigated using the finite element simulation. First the experiments available in the literature is simulated using the software ABAQUS/ Explicit and compared with the experimental results which shows good agreement with. Then by changing the position of the electrodes, the effect of their position on the formability and thickness distribution of the blank is investigated. The results indicates that the forming a component is only possible in limited positions of the electrodes and there is a position for the electrodes that not only improves the sheet thickness but also decreases the possibility of the failure.
شکلدهی الکتروهیدرولیک,موقعیت الکترودها,توزیع ضخامت,شکلپذیری
Electrohydraulic forming,Electrodes position,thickness distribution,formability
311
318
http://mme.modares.ac.ir/browse.php?a_code=A-15-1000-8727&slc_lang=fa&sid=15
Ali
Fazli
علی
فضلی
100319475328460059386
100319475328460059386
Yes
مدیر گروه مکانیک
Mohammad Reza
Hosseini
سید محمدرضا
حسینی
100319475328460059385
100319475328460059385
No
دانشگاه بین المللی امام خمینی (ره)