Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1394
6
1
gregorian
2015
9
1
15
7
online
1
fulltext
fa
مطالعه نظری و تجربی فرآیند لیزرکوبی آلیاژ آلومینیم 6061- T6
Laser Shock Peening of Al 6061- T6 Alloy, a theoretical and experimental study
ایجاد ایجاد تنش پسماند فشاری یکی از راههای بهبود عمر خستگی قطعات فلزی است. روشهای متعدد و گوناگونی برای ایجاد این تنش پسماند فشاری وجود دارد، روشهایی مانند ساچمه کوبی و یا نوردکاری عمیق. یکی از جدیدترین و پیشرفتهترین روشهای ایجاد تنش پسماند فشاری در قطعات صنعتی لیزرکوبی است. فرآیند لیزر کوبی، فرآیند جدید و نسبتاً پیچیده ای است، بنابراین لازم است تا آزمایشها متعددی بر روی آن انجام شده تا فرآیند بهتر شناخته شود. بدین منظور در این پژوهش از یک لیزر ان دی یاگ باانرژی پالس mJ۱۲۰۰ استفاده شد تا فرآیند لیزر کوبی به صورت تجربی روی آلیاژ آلومینیم6061- T6 انجام شود. تاثیر فرآیند بر روی سختی در عمق قطعه، ریزساختار، و زبری سطح مورد ارزیابی قرار گرفت. همچنین برای مطالعه اثر فرآیند روی شکاف روی سطح نیز یک سطح شکاف دار فرآوری شده و نتایج آن ارزیابی گردید. نتایج نشان دادند که فرآیند لیزر کوبی میتواند سختی ماده را تا عمق ۱۰۰۰ میکرون زیر سطح افزایش دهد. همچنین نتایج نشان داد که این فرآیند میتواند زبری سطح را کمی افزایش دهد که این افزایش با انتخاب پارامترهای مناسب می تواند محدود شود. لیزر کوبی یک قطعه دارای شکاف نشان داد که این فرآیند می تواند موجب رشد ترک در انتهای شکاف شود.
Inducing compressive residual stress is one of the methods of improving fatigue life in metallic components. There are numerous and various methods for inducing compressive residual stress, such as shot peening and deep rolling. One of the most recent and most advanced methods for inducing compressive residual stress in industrial components is Laser Shock Peening (LSP). LSP is a relatively new and complex process, therefore, vast experimental investigations are needed for better understanding the process. For this purpose in the present work, an Nd: YAG Laser with 1200mJ of energy per pulse was used to investigate the LSP process experimentally on Al 6061- T6 alloy. The effect of process on the hardness beneath the surface, the microstructure, and the surface roughness was studied. In addition, in order to investigate the effect of the LSP process on a notch, a notched sample was treated using the LSP process. The results showed that the process could increase the hardness of the material up to 1000μm below the surface. Furthermore, the results showed that the surface roughness would slightly get increased, while this increase could be limited by properly selecting the process parameters. The LSP process of the notched sample showed that this process could lead to the growth of cracks in such samples.
لیزر کوبی,لیزر Nd: YAG,تنش پسماند فشاری,زبری سطح,سختی ویکرز
Laser shock peening,Nd: YAG Laser,Compressive Residual Stress,Surface roughness,and Vickers Hardness
73
79
http://mme.modares.ac.ir/browse.php?a_code=A-15-1000-1534&slc_lang=fa&sid=15
Arman
Salimian
آرمان
سلیمیان
100319475328460057269
100319475328460057269
No
دانشگاه صنعتی اصفهان
Ehsan
Foroozmehr
احسان
فروزمهر
100319475328460057274
100319475328460057274
Yes
استادیار/ دانشگاه صنعتی اصفهان
Mohsen
Badrossamay
محسن
بدرسمای
100319475328460057275
100319475328460057275
No
استادیار/ دانشگاه صنعتی اصفهان