Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1398
5
1
gregorian
2019
8
1
19
8
online
1
fulltext
fa
تعیین مدول یانگ با روش بهروزرسانی مدل المان محدود
Determination of Young's Modulus by Finite Element Model Updating
<div style="text-align: justify;"><span style="font-size:12px;"><span style="font-family:iransharp;">در این مقاله، یک روش تجربی برای تعیین دقیق مدول <em>یانگ</em> در المانهای سازهای با استفاده از رویکرد بهروزرسانی مدل المان محدود ارایه شده است. بهروزرسانی مدل عبارت از تصحیح مدل عددی یک سازه با استفاده از دادههای اندازهگیریشده از سازه واقعی است. در این راستا پس از معرفی نمونه مورد تحقیق که یک تیر آلومینیومی با آلیاژ <span dir="LTR">۷۰۷۵-T۶۵۱</span> بوده، فرکانسهای ارتعاشات خمشی آن با آزمون مودال اندازهگیری شده و با استفاده از روابط بهروزرسانی مدل، مدول <em>یانگ</em> استخراج شده است. در ادامه، مدول <em>یانگ</em> نمونه مورد مطالعه با استفاده از روابط موجود در استاندارد <span dir="LTR">ASTM E۱۸۷۶-۰۱</span> و همچنین با استفاده از روابط تحلیلی حاکم بر رفتار تیر اویلر- برنولی نیز محاسبه شده است. نتایج حاصل از روش بهروزرسانی مدل حاکی از آن است که انطباق بسیار خوبی با نتایج حاصل از دو رویکرد اخیر یعنی استاندارد <span dir="LTR">ASTM</span> و روابط تیر اویلر- برنولی وجود دارد. در نتیجه این روش را میتوان با دقت خوبی برای شناسایی مدول <em>یانگ</em> در المانهای سازهای با شکلهای پیچیدهتر توسعه داد که روابط حاصل از استاندارد فوقالذکر و روابط تحلیلی بهدلیل محدودیتهای هندسی در آنجا کارآیی ندارند.</span></span></div>
<p class="Abstract" style="text-align: justify;">In this paper, a new method for determining the Young's modulus of structural elements, using the finite element model updating approach, is presented. The model updating is the correction of the numerical model of a structure based on measured data from the real structure. Therefore, after introducing a case study of an aluminum alloy (7075-T651) beam, the frequency of bending vibrations of the case study was measured, using frequency response functions derived from the modal test. Then, Young's modulus for the case study was calculated, using the relationships in the ASTM E 1876-01standard and also the analytical relations governing Euler–Bernoulli beam behavior. The results of the model updating method indicate that there is a very good adaptation with the results of the two recent approaches, the Standard and Euler–Bernoulli beam relations. As a result, this method can be developed with good precision to identify the Young’s modulus in structural elements with more complex shapes, where the relations derived from the aforementioned standard and analytical relations are not efficient due to geometric constraints.</p>
<p class="Abstract"></p>
مدول یانگ, تست مودال, بهروزرسانی مدل, استاندارد ASTM, تیر اویلر- برنولی
Young's Modulus, Modal Test, Model Updating, ASTM Standard, Euler-Bernoulli Beam
1837
1844
http://mme.modares.ac.ir/browse.php?a_code=A-10-25151-2&slc_lang=fa&sid=15
F.
Adel
فرهاد
عادل
1003194753284600126854
1003194753284600126854
No
Aerospace Engineering Faculty, Malek-Ashtar University of Technology, Tehran, Iran
دانشکده مهندسی هوافضا، دانشگاه صنعتی مالک اشتر، تهران، ایران
S.
Shokrollahi
سعید
شکراللهی
s_shokrollahi@mut.ac.ir
1003194753284600126855
1003194753284600126855
Yes
Aerospace Engineering Faculty, Malek-Ashtar University of Technology, Tehran, Iran
دانشکده مهندسی هوافضا، دانشگاه صنعتی مالک اشتر، تهران، ایران
E.
Beygi
عرفان
بیگی
1003194753284600126856
1003194753284600126856
No
Aerospace Engineering Faculty, Malek-Ashtar University of Technology, Tehran, Iran
دانشکده مهندسی هوافضا، دانشگاه صنعتی مالک اشتر، تهران، ایران