Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1393
10
1
gregorian
2015
1
1
14
10
online
1
fulltext
fa
مطالعه تأثیر حضور نانوذرات رسی بر خواص کششی و خمشی در سیستم رزین اپوکسی با سخت کنندههای تتا و اف205
Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins
در این مقاله، تأثیر افزودن نانوذرات اصلاح شده رسی بر خواص مکانیکی دو سیستم رزین اپوکسی بررسی شده است. پایه اپوکسی در هر دو سیستم، دیگلیسیدیل اتر بیس فنول نوع آ با نام تجاری ایپون 828 بوده و از یک سیکلوآلیفاتیک آمین اصلاح شده با نام تجاری اف205و تری اتیلن تترامین با نام تجاری تتا به عنوان پایه دوم سیستم رزین اپوکسی، سخت کننده، استفاده شده است. نانوذرات رسی کلویسید سی بی با درصد های وزنی 0، 5/1، 3 و 5 درصد نسبت به مجموعه رزین (اپوکسی- نانوذرات رس) در سیستم اپوکسی پخش شده اند. به منظور تعیین مورفولوژی نانوکامپوزیتهای اپوکسی/ نانورس از آزمون پراش اشعه ایکس استفاده شده است. مشاهدات به روش پراش پرتو ایکس نشان میدهد که توزیع نانوذرات رسی اصلاح شده در زمینه پلیمری در هر دو سیستم رزین از نوع بین لایه ای میباشد. خواص مکانیکی نانوکامپوزیتهای اپوکسی/ نانورس نیز با استفاده از آزمونهای استاندارد کشش تک محوری و خمش سه نقطه ای تعیین گردید. نتایج مربوط به آزمایشهای مکانیکی نشان می دهد که رفتار مکانیکی دو سیستم رزین اپوکسی با افزودن نانوذرات رسی، متفاوت از یکدیگر می باشد. با مقایسه نتایج مربوط به دو سیستم رزین اپوکسی تقویت شده با نانوذرات رسی می توان نتیجه گرفت که تأثیر مثبت حضور نانوذرات رسی بر خواص مکانیکی در سیستم رزین اپوکسی سخت شده با سخت کننده اف205مشهودتر می باشد.
In this study, the reinforcing effect of organically modified layered clay in two epoxy matrices, TETA-cured and F205-cured, was studied. The epoxy resin system is made of a diglycidyl ether of bisphenol A, Epon 828, as the epoxy prepolymer and the two hardeners were Epikure 3234, namely TETA, and Epikure F205. The organically modified clay, Closite 30B, is dispersed into the epoxy system in a 0%, 1.5%, 3% and 5% ratio in weight with respect to the matrix. The state of dispersion was characterized by X-ray diffraction method. In both systems of epoxy resin, the results of XRD show that the clay has been further intercalated by the epoxy matrix. The tensile and flexural properties of the epoxy/clay nanocomposites were investigated according to the standard tests. The results of mechanical tests indicate that the mechanical behavior of two epoxy resin systems reinforced with clay nanoparticles, are different from each other, so that adding clay into the epoxy matrices makes the TETA-cured nanocomposites more brittle and the others cured with F205 more soften. By comparing the results of two epoxy resin systems reinforced with clay nanoparticles, it is concluded that positive effect of presence of the clay nanoparticles is evident on the mechanical properties of the F205-cured epoxy resin.
نانوکامپوزیت,نانوذرات رسی,خواص مکانیکی,سخت کننده تِتا,سخت کننده اف205
Nanocomposite,Clay nanoparticles,Mechanical Properties,Epikure TETA,Epikure F205
9
16
http://mme.modares.ac.ir/browse.php?a_code=A-15-1000-4838&slc_lang=fa&sid=15
Reza
Zamani
رضا
زمانی
100319475328460053210
100319475328460053210
No
Tarbiat Modares University
دانشگاه تربیت مدرس
G. H.
Rahimi
غلامحسین
رحیمی
100319475328460053209
100319475328460053209
Yes
Tarbiat Modarres Univ
استاد دانشگاه تربیت مدرس، هیأت علمی
Mohammad Hossein
pol
محمدحسین
پل
100319475328460053227
100319475328460053227
No
دانشگاه تفرش