Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1393
7
1
gregorian
2014
10
1
14
7
online
1
fulltext
fa
مطالعه آزمایشگاهی اثر تزریق پودر زغال سنگ آنتراسیت بر ساختار شعله، انتقال حرارت تابشی، توزیع دما و راندمان حرارتی شعله دیفیوژن گاز طبیعی
Experimental study on the effect of coal particles injection on flame structure, radiation heat transfer, temperature distribution and thermal efficiency in natural gas diffusion flames
استفاده از گاز طبیعی به عنوان سوختی پاک دارای رشد روز افزون است. در بسیاری از سیستمهای احتراق صنعتی نظیر کوره¬های صنعتی و بویلرها، سهم بزرگی از انتقال حرارت از طریق تابش انجام می¬شود و استفاده از سوخت گاز طبیعی باعث کاهش انتقال حرارت تابشی در این تجهیزات صنعتی شده و تولید¬کنندگان صنعتی را با مشکلات زیادی روبرو کرده است. افزودن ذرات جامد واکنش دهنده به درون شعله، یکی از روش¬های مورد توجه محققین برای افزایش انتقال حرارت تابشی شعله¬های غیر درخشان نظیر هیدروژن و گاز طبیعی است. در تحقیق حاضر اثر تزریق ذرات پودر زغال سنگ آنتراسیت به شعله¬ دیفیوژن یک مشعل گاز طبیعی¬سوز بر روی ساختار شعله، انتقال حرارت تابشی، توزیع دما و راندمان حرارتی مورد بررسی قرار گرفته است. نتایج به دست آمده نشان می¬دهد که تزریق ذرات پودر زغال سنگ آنتراسیت به داخل شعله گاز طبیعی با افزایش ذرات جامد دوده در ساختار شعله، ضمن افزایش سطح واکنشی شعله و بهبود درخشندگی آن، با افزایش ضریب صدور تابش شعله، انتقال حرارت تابشی و راندمان حرارتی آن را به ترتیب %43 و %21 افزایش می¬دهد. این در حالی است که تغییر دمای شعله بسیار ناچیز و حداکثر 47 درجه سانتیگراد است.
Using natural gas as a clean fuel is raising. In many industrial combustion systems, like industrial furnace and boilers, a large portion of heat transfer is done by radiation and using natural gas in these industrial systems leads to decrease in radiation heat transfer that faces the Manufacturers with many problems. The addition of solid reactant particles into the flame is one of the attractive methods that are considered by many researchers to increase the radiation heat transfer in non-luminous flame such as hydrogen and natural gas flame. In this study, the effect of coal particles injection into the natural gas diffusion flame on flame structure, radiation heat transfer, temperature profile, and thermal efficiency has been considered. The results show that the injection of coal particles into the natural gas by increasing the solid soot particles in the flame structure, increases the reaction surface and flame luminosity and with increasing the radiation emissivity coefficient, increases the radiation heat transfer and thermal efficiency 43% and 21% respectively. Whereas change in flame temperature is very low and is 47˚C in its extreme limit.
گاز طبیعی,تزریق,ذرات زغال سنگ,انتقال حرارت تابشی
Natural gas,injection,Coal particles,Radiation heat transfer
163
168
http://mme.modares.ac.ir/browse.php?a_code=A-15-1000-5051&slc_lang=fa&sid=15
Mohammad
Moghiman
محمد
مقیمان
100319475328460052769
100319475328460052769
Yes
ferdowsi university of mashhad department of mechanical engineering
استاد گروه مهندسی مکانیک دانشکده مهندسی دانشگاه فردوسی مشهد
Seyed Hadi
Poorhoseini
سید هادی
پورحسینی
100319475328460052768
100319475328460052768
No
Ferdowsi university of mashhad, department of mechanical engineering
دانشجوی مقطع دکتری رشته مهندسی مکانیک دانشگاه فردوسی مشهد