Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1393
5
1
gregorian
2014
8
1
14
5
online
1
fulltext
fa
بهبود شکل پذیری در فرایند هیدروفرمینگ لوله با اعمال ارتعاشات آلتراسونیک
Improve the formability in tube hydroforming process using ultrasonic vibrations
در فرایند هیدروفرمینگ لوله، جریان نامناسب فلزی ناشی از شرایط اصطکاکی، سبب پر نشدن گوشه های قالب و ایجاد نازک شدگی زیاد در گوشه های لوله می گردد. این مقاله با ارائه یک ایده نوین در فرایند هیدروفرمینگ، به بررسی تئوری و آزمایشگاهی اثر اعمال ارتعاشات بر بدنه قالب هیدروفرم لوله پرداخته است. با مدلسازی اجزاء محدود فرایند هیدروفرمینگ آلتراسونیک لوله و مقایسه آن با مدل اجزاء محدود همین فرایند در حالت کلاسیک، امکان بررسی میزان بهبود فرایند با استفاده از ارتعاشات قالب فراهم شده است. علاوه بر آن، تحلیل اجزاء محدود مودال و هارمونیک برای طراحی مجموعه ی هیدروفرمینگ آلتراسونیک بکار رفته است، و به کمک این تحلیل ها شکل خاصی از متمرکز کننده پیشنهاد شده است. برای هیدروفرمینگ لوله، مکانیزم ساده ای در این تحقیق معرفی شده که تولید کم هزینه قطعات را بدون نیاز به ماشین هیدروفرمینگ امکان پذیر می سازد. نتایج نشان می دهد با استفاده از ارتعاشات آلتراسونیک، میزان شکل پذیری و برگشت فنری بهبود داشته، و علاوه بر آن، ضخامت دیواره لوله نیز یکنواختی بیشتری دارد.
In tube hydroforming process, due to friction condition, uniform wall thickness, as well as sharp corners may not be achieved. Use of ultrasonic vibration can improve the contact conditions at the tube-die interface. The current work studies the effect of applying ultrasonic vibration on wall thickness and corner radius of hydroformed tubes. By comparing the FEM models of tubes in two cases of with vibration and without vibration, it is possible to investigate the effects of vibration on process. In addition, the finite element analysis, as the modal and harmonic analysis, are used to design a set of ultrasonic tube hydroforming. A simple mechanism introduced in this paper is used to form the tube. The results indicate superimposing ultrasonic vibrations to the process will improve formability and spring back of the, and more uniform tube wall thickness will be achieved.
هیدروفرمینگ لوله,ارتعاشات آلتراسونیک,شکل پذیری
Tube hydroforming,Ultrasonic Vibration,tube formability
63
72
http://mme.modares.ac.ir/browse.php?a_code=A-15-1000-6283&slc_lang=fa&sid=15
Seyed Ehsan
Eftekhari
سید احسان
افتخاری شهری
100319475328460052054
100319475328460052054
No
دانشگاه بیرجند
Seyed Yousef
Ahmadi
سید یوسف
احمدی بروغنی
100319475328460052055
100319475328460052055
No
دانشگاه بیرجند
Khalil
Khalili
خلیل
خلیلی
100319475328460052052
100319475328460052052
Yes
دانشگاه بیرجند
Aminollah
Mohammadi
امین اله
محمدی
100319475328460052053
100319475328460052053
No
دانشگاه صنعتی اصفهان