Modares Mechanical Engineering
مهندسی مکانیک مدرس
Modares Mechanical Engineering
Engineering & Technology
http://mme.modares.ac.ir
1
admin
1027-5940
2476-6909
10.22034/mme
fa
jalali
1393
12
1
gregorian
2015
3
1
15
1
online
1
fulltext
fa
بررسی تاثیر عملیات حرارتی بر خواص مکانیکی و متالورژیکی ورق سه لایه Al/St/Al
Investigation of annealing treatment on the mechanical and metallurgical properties of explosive-welded Al/St/Al multilayer
یکی از روش های ایجاد اتصال بین فلزات هم جنس و غیر همجنس، فرایند جوش انفجاری می باشد که فشار لازم جهت ایجاد اتصال از طریق انرژی ناشی از انفجار مواد منفجره حاصل می شود. در این پژوهش ورق سه لایه آلومینیوم/فولاد/آلومینیوم از طریق جوشکاری انفجاری تولید گردید و اثر دما و زمان عملیات حرارتی آنیلینگ بر خواص مکانیکی و متالورژیکی فصل مشترک اتصال مطالعه شده است. بدین منظور تغییرات سختی در راستای ضخامت نمونه ها اندازه گیری شده و ضخامت و نوع ترکیبات بین فلزی تشکیل یافته در فصل مشترک اتصال با استفاده از میکروسکوپ نوری و میکروسکوپ الکترونی روبشی و همچنین آنالیز شیمیایی عناصر مورد بررسی قرار گرفته است. نتایج نشان دهنده آن است که افزایش دما و زمان عملیات حرارتی باعث افزایش عمق نفوذ و ضخامت ترکیبات بین فلزی در فصل مشترک اتصال می شود. مطالعات صورت گرفته پس از تست میکروسختی ویکرز نشان دهنده تعدادی میکروترک در فصل مشترک بالا و پایین برخی نمونه های آنیل شده می باشد که این موضوع، تشکیل ترکیبات بین فلزی ترد در فصل مشترک اتصال و شکل پذیری پایین این ترکیبات را نشان می دهد. همچنین به منظور بررسی کیفیت اتصال لایه ها تست برش به انجام رسید که بیانگر اتصال قابل قبول لایه ها به یکدیگر بود.
Explosive welding is used for excellent bonding of similar and dissimilar materials with the wide variety of thicknesses,area dimensions and different thermal and mechanical properties. In this study, an Al/St/Al multilayer sheet was fabricated by explosive welding process and the effects of annealing temperature on the interfacial properties of explosively bonded Al/Cu bimetal have been investigated. For this purpose, hardness changes along the thickness of the samples have been measured, and the thickness and type of intermetallic compounds formed at the joining interface have been explored by means of optical microscopy (OM), scanning electron microscopy (SEM) and also energy dispersive spectroscopy (EDS). By heat treatment of the samples at 300, 350 and 400°C, it was observed that intermetallic layer was formed at the interfaces. The obtained results indicate that, with the increase of the annealing temperature, the thickness of intermetallic compounds has increased and the amount of hardness along the thickness of the joining interface has diminished. In the annealed sample at 300 °C for 60 min, it was observed that intermetallic layers have formed at the interface of Al/St bimetals. These layers consist of the intermetallic compound Al2Fe and its thickness gets to about 35 μm at some points.
جوشکاری انفجاری,عملیات حرارتی,ترکیبات بین فلزی,فصل مشترک
Explosive welding,Heat treatment,Intermetallics,interface
397
402
http://mme.modares.ac.ir/browse.php?a_code=A-15-13618-55&slc_lang=fa&sid=15
Mahdi
Pourjafari Kasmaee
مهدی
پورجعفری کسمایی
100319475328460054809
100319475328460054809
No
دانشجو
mohammad
honarpishe
محمد
هنرپیشه
100319475328460054804
100319475328460054804
Yes
دانشگاه کاشان