<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه تربیت مدرس</PublisherName>
				<JournalTitle>مهندسی مکانیک مدرس</JournalTitle>
				<Issn>2476-6909</Issn>
				<Volume>19</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2018</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Simulation of the Residual Stresses Distribution in Girth Weld of Gas Transmission Pipeline</ArticleTitle>
<VernacularTitle>شبیه‌سازی توزیع تنش‌های پسماند در جوش سربه‌سر خطوط انتقال گاز طبیعی</VernacularTitle>
			<FirstPage>223</FirstPage>
			<LastPage>228</LastPage>
			<ELocationID EIdType="pii">10569</ELocationID>
			
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>مجید</FirstName>
					<LastName>سبک‌روح</LastName>
<Affiliation>دانشکده مهندسی، مرکز آموزش عالی محلات، محلات، ایران</Affiliation>

</Author>
<Author>
					<FirstName>محمدرضا</FirstName>
					<LastName>فراهانی</LastName>
<Affiliation>گروه مهندسی مکانیک، پردیس دانشکده‌های فنی، دانشگاه تهران، تهران، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-5515-4283</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
		    <Abstract>The weld residual stresses decrease the design stress in gas transportation pipelines. In this paper, two X70 steel pipes of 56 inch outside diameter were firstly girth welded. Experimental hole drilling test was conducted to evaluate the residual stress distribution in this joint. Then, the finite element simulation of the welding process was performed to evaluate the residual stress distribution precisely. The numerical results were verified by comparison with the obtained experimental measurements. The qualitative results achieved match properly with the experimental results. Simulation results (with a difference about 15% compared to experimental results) evaluated the maximum residual stress in hoop direction of pipe’s external weld metal. The experimental data showed that the maximum tensile residual stress was located on the center line of the weld gap on the pipe outer surface alongside with the pipe hoop direction. Moreover, the maximum compressive (hoop and axial) residual stresses occurred on the pipe inner surface in heat affected zone. The variations of the hoop residual stresses on the inner and outer surfaces of the pipe had similar trend with tensile distribution at the center line of the weld gap. However, these stresses showed different trends (tensile stress on the outer surface, and compressive stress on the inner surface) with distancing from the weld center line.</Abstract>
			<OtherAbstract Language="FA">وجود تنش‌های پسماند باعث کاهش مقدار تنش طراحی مجاز در خطوط انتقال گاز می‌شود. در این مقاله ابتدا دو قطعه لوله فولادی X۷۰ با قطر ۵۶اینچ به روش دستی جوشکاری شد. سپس آزمون تجربی کرنش‌سنجی سوراخ برای ارزیابی توزیع تنش‌های پسماند در این اتصال انجام شد. در ادامه، شبیه‌سازی المان محدود فرآیند جوشکاری برای ارزیابی دقیق توزیع تنش‌های پسماند در این اتصال انجام شد که نتایج آن با مقایسه با نتایج تجربی صحه‌گذاری شد. نتایج کیفی به‌دست‌آمده به میزان مناسبی با نتایج آزمایشگاهی همخوانی دارد. نتایج شبیه‌سازی (با اختلاف ۱۵% نسبت به نتایج تجربی) حداکثر تنش پسماند را در راستای محیطی درز جوش خارجی لوله ارزیابی نمود. نتایج تجربی نشان داد که حداکثر تنش پسماند کششی در مرکز ناحیه جوش و در راستای محیطی سطح خارجی لوله به وجود آمده است. همچنین حداکثر تنش پسماند فشاری در راستاهای محیطی و محوری سطح داخلی لوله در منطقه متاثر از حرارت جوش قرار دارد. تغییرات تنش‌های پسماند محیطی در سطوح داخل و خارج لوله رفتارهای مشابه داشته و این تنش‌ها در مرکز ناحیه جوش به‌صورت کششی است. اما با فاصله‌گرفتن از مرکز ناحیه جوش رفتاری متضاد (در سطح خارج لوله به‌صورت کششی و در سطح داخل آن به صورت فشاری) مشاهده شد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">شبیه‌سازی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تنش‌های پسماند</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">جوش سربه‌سر لوله</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کرنش‌سنجی سوراخ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">لوله انتقال گاز</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://mme.modares.ac.ir/article_10569_e8c6ba1577afdf09f6ca0ea7fb987590.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
