Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

In this paper, a new approach has been presented for dynamic control of active suspension vehicle system subject to the road disturbances. The active suspension system (ASS) which has been considered in this paper is operated by a hydraulic actuator. The input of this hydraulic actuator is a servo valve. In the other word, both mechanical equation of system (related to hydraulic actuator) and its electrical equation (related to servo valve) are considered. Therefore, the equations are complicated and only the input current of servo valve is accessible as the input control signal. The proposed approach is based on dynamic sliding mode control (DSMC).In DSMC chattering is removed due to the integrator which is placed before the input control signal of the plant. However, in DSMC the augmented system (the system plus the integrator) is one dimension bigger than the actual system and then, control of the plant is more complicated. But, its advantage is that the input control signal is obtained from a dynamic system or a low pass filter, while the robust performance (invariance property) of the system is reserved even in the presence of disturbance. Another advantage of proposed approach is that the desired output force of the hydraulic actuator is obtained by the controller.

Keywords: Active Suspension System, Dynamic Sliding Mode Control, Chattering

Full-Text [PDF 599 kb]   (6835 Downloads)    

Add your comments about this article : Your username or Email:

---