Volume 17, Issue 11 (1-2018)
Modares Mechanical Engineering 2018, 17(11): 118-124 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
hamrahi S E, Goudarzi K, Yaghoubi M, Ghaedi M. Experimental study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol. Modares Mechanical Engineering 2018; 17 (11) :118-124
URL: http://mme.modares.ac.ir/article-15-12066-en.html
URL: http://mme.modares.ac.ir/article-15-12066-en.html
1- Department of Mechanical Engineering, Yasouj University, Yasouj, Iran
2- Department of Mechanical Engineering, Yasouj University, Yasouj
3- Department of Mechanical Engineering, Shiraz University, Shiraz, Iran
4- Department of Chemical, Yasouj University, Yasouj, Iran
2- Department of Mechanical Engineering, Yasouj University, Yasouj
3- Department of Mechanical Engineering, Shiraz University, Shiraz, Iran
4- Department of Chemical, Yasouj University, Yasouj, Iran
Abstract: (5437 Views)
The goal of this research is to design and build a solar adsorption chiller operated by activated carbon / methanol. Continuous refrigeration systems are able to produce cooling continuously. This paper examines the effect of activated carbon particles on the performance of a continuous adsorption chiller device. The source of this chiller is through sunlight and supplied by a parabolic collector that does not need to track sunlight. The system operates with two adsorbent beds that, when one is adsorbed, the other is desorbed. The experiments were carried out in Yasuj during three different days in the month of Bahman for three hot water input to the chiller 38℃, 34℃ and 30℃. The average ambient temperature during the experiment is 18℃. Experimental results shows that for the total energy input, 13MJm-2, the average performance factor of the chiller is when the inlet temperature of the hot water of the chiller is 38℃, 34℃ and 30℃, respectively, of 0.123, 0.103 and 0.10. For Previous temperatures the average specific cooling power of the device was obtained at 88Wkg-1, 65Wkg-1 and 50Wkg-1 respectively.
Article Type: Research Article |
Subject:
Plumbing & Air Conditioning
Received: 2017/07/1 | Accepted: 2017/09/6 | Published: 2017/11/10
Received: 2017/07/1 | Accepted: 2017/09/6 | Published: 2017/11/10
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |