Volume 13, Issue 14 (Second Special Issue 2014)
Modares Mechanical Engineering 2014, 13(14): 210-219 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
kosari A R, peyrovani M, fakoor M, nejat H. Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels. Modares Mechanical Engineering 2014; 13 (14) :210-219
URL: http://mme.modares.ac.ir/article-15-2822-en.html
URL: http://mme.modares.ac.ir/article-15-2822-en.html
Abstract: (6940 Views)
In this paper, LQG/LTR controller is designed for attitude control of the geostationary satellite at nominal mode. Usage actuator in this paper is the reaction wheel and control torque is determined by the LQR regulator. Usage sensors in this article are sun and earth sensors and EKF are used for estimation of noisy states. LQR controller signal has good performance, if all system's states are considered in system output feedback. But this method is ideal and does not include model noise and sensors noise. Therefore, LQG and LQG/LTR controllers are designed based on the estimated states, and are compared with LQR controller. Controllers gain coefficients are obtained based on linearization about working point. It caused to robustness and similarity of LQG and LQG/LTR response. The results show that control overshoot of LQR is greater than the others.
Keywords: LQG/LTR, Geostationary satellite, Attitude control, Extended Kalman Filter, LQG/LTR, Reaction Wheel
Article Type: Research Article |
Subject:
Control|Mechatronics
Received: 2013/05/23 | Accepted: 2013/08/8 | Published: 2014/02/20
Received: 2013/05/23 | Accepted: 2013/08/8 | Published: 2014/02/20
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |