Volume 17, Issue 10 (1-2018)
Modares Mechanical Engineering 2018, 17(10): 129-138 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Pakdaman M, Jaamialahmadi A. An experimental investigation into warm deep drawing process on PVC/fiberglass composite laminates. Modares Mechanical Engineering 2018; 17 (10) :129-138
URL: http://mme.modares.ac.ir/article-15-5498-en.html
URL: http://mme.modares.ac.ir/article-15-5498-en.html
1- Department of Mechanical Engineering
Faculty of Engineering
Ferdowsi University of Mashhad
Abstract: (4745 Views)
In this article, the influence of process parameters on warm deep drawing of PVC/fiberglass composite laminates (FRP) is investigated through the experimental tests. Fiberglass reinforced polymer (PVC) composite laminate sheets are new emerging materials that have many potential applications. FRP/composites provide high strength to weight ratios exceeding those of aluminum or steel. For the experimental tests, composite samples with [0/90]2, [0/90]4, [-30/30]2, [-30/30]4 lay ups were produced in using film stacking procedure. Statistical analyses based on Taguchi's method are used to reduce the number of experiments and to investigate the effect of process variables on the output results. The results show that the two variables of temperature and blank holder force have the most influence on output parameters. Furthermore they demonstrate that a high interaction between the forming temperature and blank-holder force is required to remove the wrinkling.
Received: 2017/07/31 | Accepted: 2017/09/1 | Published: 2017/10/5
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |