Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Magnetic abrasive finishing process (MAF) is one of the latest advanced machining processes. After eight decades have passed since the registration of the magnetic abrasive polishing process, the applicability of this method has been proven in finishing all kinds of surfaces, including flat, cylindrical and free surfaces. In this research, the influence of MAF process movement parameters on the concave surface of cold-worked steel has been investigated experimentally using the response surface method. These parameters include rotational speed, linear speed, gap between abrasive brush and workpiece, magnetic flux density and curvature angle. For this purpose, a spherical head magnet is used and the powder used is prepared by mechanical alloying method. Cold-worked steel is used in the manufacture of roll forming molds, which is used in air engines to shape compressor and turbine blades, and also to investigate the feasibility of the MAF process on the workpiece surface with high hardness and yield stress, such as Cold work steel is selected. According to the results, the optimal value of the magnetic flux density is 0.55 tesla, and with the increase of the distance between the abrasive brush and the workpiece, the surface roughness changes initially increase and decrease after passing the optimal value.
 

Keywords: Magnetic abrasive finishing, machining, steel, concave surface, free surface, Design of Experiments, response surface method

Full-Text [PDF 642 kb]   (1050 Downloads)    

Add your comments about this article : Your username or Email:

---