Volume 14, Issue 2 (5-2014)
Modares Mechanical Engineering 2014, 14(2): 195-200 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Khamedi R, Porsaeidi E, Jabbari M. An Investigation to Corrosion of Stainless Steels by Acoustic Emission Method. Modares Mechanical Engineering 2014; 14 (2) :195-200
URL: http://mme.modares.ac.ir/article-15-90-en.html
URL: http://mme.modares.ac.ir/article-15-90-en.html
Abstract: (6751 Views)
Acoustic Emission technique is a non destructive method which can be used for detection of corrosion mechanism. In this paper the corrosion of sulfuric and hydrochloric acids solution on some kinds of stainless steel like 304, 316 and GTD-450 with and without residual stress was surveyed by acoustic emission technique. Considering tests diagrams, cumulative counts in the samples with residual stress is more than other ones due to high sensitivity of stainless steel samples to stress corrosion cracking. Also frequency in the samples with residual stress is lower than other ones. Cumulative count in the stainless steel 304 is more than stainless steel 316 for all of the samples. A sudden and intensive corrosion in the hydrochloric acid environment was observed specially in the samples with residual stress. For stainless steel 304, this event was very harmful, because, it will the cause of some pitting corrosion, which concentrates stress in these locations and finally creates crack in structure.
Article Type: Research Article |
Subject:
Non Destvuctive Test
Received: 2013/05/11 | Accepted: 2013/05/27 | Published: 2014/05/11
Received: 2013/05/11 | Accepted: 2013/05/27 | Published: 2014/05/11
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |