Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Determination of the damage parameters for different materials can be beneficial to the analysis and assessment of rupture during forming of thin metallic plates. The amount of damage depends on the strain amplitude, the state of stress, and also the path and rate of the strain. The state of stress at the damage location is an important and effective parameter which is described by stress triaxilality, load angle and equivalent stress. In this paper, the mechanical behavior and ductile damage properties of Al 2024-O have been investigated. The aim was the determination of the mechanical behavior and development of an expression for correlation between the failure strain and the state of stress at the damage location. Hence, the experimental tests were carried out on both smooth and notched flat specimens. Various levels of stress triaxiality in notched specimens were created by variation of the notch radius. Based on the test results, a new expression has been developed for correlation between the failure strain and the triaxiality ratio for Al 2024-O in the plane strain regime. In order to evaluate the simulation procedure and applicability of the proposed expressions in more complex problems, the process was simulated using ductile damage criterion in the ABAQUS software, and the experimental and numerical results were compared. Very good agreements were observed between the simulation and experimental results.

Keywords: Ductile damage, Finite element simulation, Stress triaxiality, Fracture strain

Full-Text [PDF 1128 kb]   (3947 Downloads)    

Add your comments about this article : Your username or Email:

---