Li C, Li X, Li P, Ye X. Numerical investigation of impeller trimming effect on performance of an axial flow fan. Energy. 2014;75:534-548. [
Link] [
DOI:10.1016/j.energy.2014.08.015]
Nho YC, Park JS, Lee YJ, Kwak JS. Effects of turbine blade tip shape on total pressure loss and secondary flow of a linear turbine cascade. International Journal of Heat and Fluid Flow. 2012;33(1):92-100. [
Link] [
DOI:10.1016/j.ijheatfluidflow.2011.12.002]
Lee SW, Kim SU, Kim KH. Aerodynamic performance of winglets covering the tip gap inlet in a turbine cascade. International Journal of Heat and Fluid Flow. 2012;34:36-46. [
Link] [
DOI:10.1016/j.ijheatfluidflow.2011.11.008]
Mohamed MH, Shaaban S. Optimization of blade pitch angle of an axial turbine used for wave energy conversion. Energy. 2013;56:229-239. [
Link] [
DOI:10.1016/j.energy.2013.04.035]
Park JS, Lee DH, Rhee DH, Hyung Kang S, Hee Cho H. Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade. Energy. 2014;72:331-343. [
Link] [
DOI:10.1016/j.energy.2014.05.041]
Takahashi S, Hata Y, Ohya Y, Karasudani T, Uchida T. Behavior of the blade tip vortices of a wind turbine equipped with a brimmed-diffuser shroud. Energies. 2012;5(12):5229-5242. [
Link] [
DOI:10.3390/en5125229]
De Maesschalck C, Lavagnoli S, Paniagua G. Blade tip shape optimization for enhanced turbine aerothermal performance. Journal of Turbomachinery. 2013;136(4):41016-41026. [
Link] [
DOI:10.1115/1.4025202]
He W, Dai Y, Zhu S, Han D, Yue C, Pu W. Influence from the blade installation angle of the windward axial fans on the performance of an air-cooled power plant. Energy. 2013;60:416-425. [
Link] [
DOI:10.1016/j.energy.2013.08.032]
Zhang WF, Yang JG, Li C, Tian YW. Comparison of leakage performance and fluid-induced force of turbine tip labyrinth seal and a new kind of radial annular seal. Computers & Fluids. 2014;105:125-137. [
Link] [
DOI:10.1016/j.compfluid.2014.09.010]
Zhang C, Hu J, Wang Z. Investigations on the effects of inflow condition and tip clearance size to the performance of a compressor rotor. Journal of Engineering for Gas Turbines and Power. 2014;136(12):122608-122616. [
Link] [
DOI:10.1115/1.4027906]
Zhang L, Jin Yi, Jin Yu. Effect of tip flange on tip leakage flow of small axial flow fans. Journal of Thermal Science. 2014;23(1):45-52. [
Link] [
DOI:10.1007/s11630-014-0675-9]
Ye X, Li P, Li C, Ding X. Numerical investigation of blade tip grooving effect on performance and dynamics of an axial flow fan. Energy. 2015;82:556-569. [
Link] [
DOI:10.1016/j.energy.2015.01.065]
Ye X, Zhang J, Li C. Effect of blade tip pattern on performance of a twin-stage variable-pitch axial fan. Energy. 2017;126:535-563. [
Link] [
DOI:10.1016/j.energy.2017.03.057]
Bell EB. Test of a single-stage axial-flow fan, Langley memorial aeronautical laboratory, report No: 729. Langley: NACA; 1941. pp. 49-64. [
Link]
ANSYS. CFX documentation [Internet]. Ontario: SHARCNET; 2017 [cited 2018 February 14]. Available from: https://www.sharcnet.ca/Software/Ansys/17.0/en-us/help/ai_sinfo/cfx_intro.html [
Link]
BASF Corporation. Basic guidelines for plastic conversion of metal axial flow fans [Internet]. Mount Olive: BASF Corporation; 2003 [cited 2018 February 29] Available from: http://www2.basf.us/webplasticsportal/downloadDoc.do?id=0901a5e180004891 [
Link]
