1. M. Awd Allah M, Abdel-Aziem W, A. Abd El-baky M. Collapse behavior and energy absorbing characteristics of 3D-printed tubes with different infill pattern structures: an experimental study. Fibers and Polymers. 2023;24(7):2609-2622.
2. Akhoundi B, Behravesh AH, Bagheri Saed A. Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer. Journal of Reinforced Plastics and Composites. 2018;38(3):99-116. 10.1177/0731684418807300 https://doi.org/10.1177/0731684418807300
3. Safi Jahanshahi A, Akhoundi B. Introduction of 3D-printed porous structures with interconnected porosities via rotation of each layer around a normal axis: Investigating the effects of annealing and printing parameters on the compressive strength and modulus of the structures. Engineering Research Express. 2025;7(1):015541. 10.1088/2631-8695/adb010 https://dx.doi.org/10.1088/2631-8695/adb010
4. Acanfora V, Sellitto A, Russo A, Zarrelli M, Riccio A. Experimental investigation on 3D printed lightweight sandwich structures for energy absorption aerospace applications. Aerospace Science and Technology. 2023;137:108276. https://doi.org/10.1016/j.ast.2023.108276 https://www.sciencedirect.com/science/article/pii/S1270963823001736
5. Isaac CW, and Duddeck F. Current trends in additively manufactured (3D printed) energy absorbing structures for crashworthiness application – a review. Virtual and Physical Prototyping. 2022;17(4):1058-1101. 10.1080/17452759.2022.2074698 https://doi.org/10.1080/17452759.2022.2074698
6. Shilov SY, Rozhkova YA, Markova LN, Tashkinov MA, Vindokurov IV, Silberschmidt VV. Biocompatibility of 3D-Printed PLA, PEEK and PETG: Adhesion of Bone Marrow and Peritoneal Lavage Cells. Polymers [Internet]. 2022; 14(19).
7. Guduru K, Srinivasu G. Effect of post treatment on tensile properties of carbon reinforced PLA composite by 3D printing. Materials Today: Proceedings. 2020;33:5403-5407.
8. Hou Z, He J, Tian X, Zhu W, Wang C, Liu P, Lan H, Li D. Performance and failure modes of continuous fibre-reinforced energy absorption tubes by cylindrical layered 3D printing. Virtual and Physical Prototyping. 2024;19(1):e2367122. 10.1080/17452759.2024.2367122 https://doi.org/10.1080/17452759.2024.2367122
9. Zuo X, Guo C, Chen W, Wang Y, Zhao J, Lv H. Influence of loading rate and temperature on the energy absorption of 3D-printed polymeric origami tubes under quasi-static loading. Polymers. 2022;14(18):3859.
10. Ebrahimi MS, Hashemi R, Etemadi E. In-plane energy absorption characteristics and mechanical properties of 3D printed novel hybrid cellular structures. journal of materials research and technology. 2022;20:3616-3632.
11. Chen B, Zou M, Liu G, Song J, Wang H. Experimental study on energy absorption of bionic tubes inspired by bamboo structures under axial crushing. International Journal of Impact Engineering. 2018;115:48-57.
12. Tunay M, Bardakci A. A study of crashworthiness performance in thin-walled multi-cell tubes 3D-printed from different polymers. Journal of Applied Polymer Science. 2024;141(48):e56287. https://doi.org/10.1002/app.56287 https://doi.org/10.1002/app.56287
13. Chen Y, Deng X, Huang H. Experimental study on crashworthiness of multicellular tubes printed with different materials based on origami folding. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2025;47(2):54. 10.1007/s40430-024-05373-0 https://doi.org/10.1007/s40430-024-05373-0
14. Zanganeh R, Safi Jahanshahi A, Akhoundi B. Experimental Investigation of the Effect of Annealing and Printing Parameters on the Compressive Strength and Modulus of 3D Printed Porous Structures with Interconnected Pores Made of Polylactic Acid by Fused Deposition Modeling Process. Modares Mechanical Engineering. 2024;24(4):251-258.
15. Raths M, Bauer L, Kuettner A, Fischer S, Laumer T. Gradual error detection technique for non-destructive assessment of density and tensile strength in fused filament fabrication processes. The International Journal of Advanced Manufacturing Technology. 2024;131(7):4149-4163. 10.1007/s00170-024-13280-w https://doi.org/10.1007/s00170-024-13280-w
16. Safi Jahanshahi A, Akhoundi B, Quagliato L. Investigation of compressive strength of 3D-printed PLA/continuous glass fibers composites manufactured by simultaneous impregnation extrusion-based additive manufacturing. Engineering Research Express. 2025;7(1):015403. 10.1088/2631-8695/ada228 https://dx.doi.org/10.1088/2631-8695/ada228
17. Kartal F, Kaptan A. Effects of annealing temperature and duration on mechanical properties of PLA plastics produced by 3D Printing. European Mechanical Science. 2023;7(3):152-159. 10.26701/ems.1290961 https://doi.org/10.26701/ems.1290961
18. Kahya Ç, Tunçel O, Çavuşoğlu O, Tüfekci K. Thermal annealing optimization for improved mechanical performance of PLA parts produced via 3D printing. Polymer Testing. 2025;144:108735. https://doi.org/10.1016/j.polymertesting.2025.108735 https://www.sciencedirect.com/science/article/pii/S0142941825000492
19. Li H, Mu Y, Wang Q, Cai D, Zhang Y, Luo Y, Liu J, Liu J, Niu K, Wu Y, et al. Interlayer enhancement of 3D printed CF/PLA composites via localized microwave welding and annealing-induced crystallization. Composites Part B: Engineering. 2024;284:111737. https://doi.org/10.1016/j.compositesb.2024.111737 https://www.sciencedirect.com/science/article/pii/S1359836824005493