مهندسی مکانیک مدرس

مهندسی مکانیک مدرس

مطالعه و مقایسه اثر پانل‌های سرمایش تابشی سقفی و دیواری بر توزیع دما، سرعت و انتقال حرارت در یک اتاق مسکونی

نویسندگان
1 استادیار دانشگاه کاشان
2 دانشیار دانشگاه کاشان
3 کارشناس ارشد تاسیسات
چکیده
یک روش مدرن برای سرمایش ساختمان ها استفاده از سیستم سرمایش تابشی است که در مقایسه با دیگر سیستم ها هم در موضوع صرفه جویی انرژی و هم در مقوله آسایش ساکنین دارای نقاط قوت بسیاری است. در این تحقیق عددی میدان جریان و توزیع دما و انتقال حرارت در یک اتاق در دو وضعیت استفاده از پانل سرمایش تابشی سقفی و دیواری مدلسازی شده است. بررسی ها با فرض دمای طرح خارج دو شهر تهران و سمنان انجام شده و تأثیر حضور فردی ساکن با در نظر گرفتن یک مکعب با شار حرارتی ثابت در مرکز اتاق بررسی شده است. نتایج نشان داده اند توزیع دمای عمودی و افقی در اتاق تقریباً یکنواخت و حداکثر سرعت مطلق هوا در فضای اتاق در محدوده 2/0 متر بر ثانیه است. در سرمایش سقفی و دیواری به ترتیب حداقل 58% و 65% از سهم انتقال حرارت به پانل تابشی است و وجود مدل انسانی آن را افزایش می دهد. افزایش دمای پانل سهم تابش را کاهش می دهد ولی افزایش دمای طرح خارج آن را افزایش می دهد. سرمایش دیواری مصرف انرژی کمتری دارد و از نظر توزیع دما و سرعت آسایش حرارتی مطلوب تری تأمین می کند.
کلیدواژه‌ها

عنوان مقاله English

Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room

نویسندگان English

Ghanbarali Sheikhzadeh 2
Amir Reza Sabonchi 3
Hadi Botshekan 3
2 Uni. of Kashan
3 Engineer
چکیده English

An advance cooling method for buildings is use of radiant cooling system, which is not only economically feasible but also enhances thermal comfort for occupants. In this numerical study the flow and temperature fields in a room equipped with radiant cooling panel, either on the ceiling or on the wall, are studied. Outside summer design temperatures of Tehran and Semnan have been considered and to model the presence of an occupant a cube is placed in the center of the room with its external walls having constant heat flux. The results show that the vertical and horizontal temperature distributions become uniform and the maximum absolute air speed is around 0.2 m/s. The share of radiation heat transfer to the ceiling or the wall cooling panel is at least 58% or 65%, respectively, which increases due to presence of a human model. The net radiation decreases by increasing the panel temperature, but increases by increasing the outside temperature. The wall cooling uses less energy and regarding temperature and velocity distribution provides a better comfort condition

کلیدواژه‌ها English

Ceiling radiant cooling
Wall radiant cooling
Numerical simulation
Temperature distribution
Velocity distribution