Ababaf Behbahani, Mohammad Hossein Investigation of Spike Stall Inception and its Propagation in a Low Speed Axial Compressor Rotor [Volume 17, Issue 5, 2017, Pages 111-118]
Abbasi, Alireza Investigation of experimental and numerical simulation of residual stresses distribution of rolling mill rolls in ultrasonic peening technology [Volume 17, Issue 7, 2017, Pages 316-324]
Abbasi, Mahmoud Friction stir vibration welding and study about the effects of its parameters on microstructure and mechanical properties of Al5052 joint [Volume 17, Issue 4, 2017, Pages 217-224]
Abbasi, Mohammad Theoretical, numerical and experimental analysis of a planar wobble motor driven by shape memory alloy (SMA)wires [Volume 17, Issue 6, 2017, Pages 401-412]
Abbaspour-Fard, Mohammad Hossein Multiple linear regression analysis of some important performance parameters of a conventional diesel engine in different working conditions [Volume 17, Issue 5, 2017, Pages 363-373]
Abbaspour-Sani, Ebrahim Study of Static Deflection and Instability Voltage of Phase Shifter Micro-Switches Using a Nonlinear Beam Model and Non-localized elasticity theory [Volume 17, Issue 10, 2018, Pages 93-100]
Abbaszadeh, Behnam Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2018, Pages 259-270]
Abdi Aghdam, Ebrahim Validation of a Polytropic-Base Blowby Model using Experimental Data of Gasoline Fuelled Motoring Cycles [Volume 17, Issue 10, 2018, Pages 205-212]
Abdi Behnagh, Reza Investigation on temperature changes of Mg cold rolling process with the Coupled Eulerian-Lagrangian (CEL) method [Volume 17, Issue 10, 2018, Pages 123-128]
Abdizadeh, Gholamreza Effects of various parameters on dynamic stall behavior and aerodynamic coefficients of a NACA0012 airfoil [Volume 17, Issue 4, 2017, Pages 359-368]
Abdoli, Arman New interior design for polymer flow membrane fuel cell flow field to improve performance for use in an aerial vehicle [Volume 17, Issue 12, 2018, Pages 297-308]
Abdollah, Amir Fracture assessment of specimens weakened by U-notch made of functionally graded materials under mode I loading [Volume 17, Issue 2, 2017, Pages 1-9]
Abdollahi, Hadi Investigation on temperature changes of Mg cold rolling process with the Coupled Eulerian-Lagrangian (CEL) method [Volume 17, Issue 10, 2018, Pages 123-128]
Abdollahi, Hassan Fast and low lost fabrication of SiO2 microcantilever based on Bulk microelectromechanical system [Volume 17, Issue 5, 2017, Pages 12-20]
Abdollahi Azghan, Mehdi Experimental investigation of effect of thermal cycling and metal surface treatment on flexural properties laminate composite of aluminium- epoxy/basalt fibers [Volume 17, Issue 8, 2017, Pages 369-376]
Abedi, Maryam Vibration analysis of a microplate in contact with a fluid based on the modified couple stress theory [Volume 17, Issue 2, 2017, Pages 47-57]
Abolbashari, Mohammad Hossein Reliability based topology optimization for maximizing stiffness and frequency simultaneously [Volume 17, Issue 4, 2017, Pages 111-116]
Abolbashari, Mohammad Hossein Investigation of the effects of flapping fin on a supersonic parachute performance [Volume 17, Issue 5, 2017, Pages 295-304]
Abolbashari, Mohammad Hossein Reliability-based topology optimization of continuous structure using particle swarm algorithm [Volume 17, Issue 7, 2017, Pages 265-272]
Abootorabi Zarchi, Mohammad Mahdi The effect of minimum quantity lubrication on surface roughness in hard turning of 100Cr6 bearing steel with Nano-CBN tool [Volume 17, Issue 3, 2017, Pages 263-269]
Abootorabi Zarchi, Mohammad Mahdi The effect of workpiece hardness and cutting parameters on surface roughness in dry hard turning of X210Cr12 cold tool steel [Volume 17, Issue 6, 2017, Pages 241-247]
Absalan, Farshid Design, modeling and simulation of weight compensation walking assistant robot [Volume 17, Issue 5, 2017, Pages 41-51]
Adib Ghapanvary, Mohammad Gliding parachute platform design optimization with performance & stability Constraints [Volume 17, Issue 4, 2017, Pages 209-216]
Adibi, Hamed Design, fabricate and testing the novel Magnetorheologic damper involving stabilizer nanoparticles of silicone [Volume 17, Issue 8, 2017, Pages 252-258]
Adljo, Seyed Yousef Numerical simulation of upward co-current gas-liquid two-phase flow in the vertical pipes of large diameter, by volume of fluid method [Volume 17, Issue 1, 2017, Pages 441-452]
Afkari, Parisa Comparison of Various Arrangement Effects of V-Shape Rib Technologies on Turbulence and Heat Transfer Enhancement in Gas Turbine Blade Internal Cooling [Volume 17, Issue 5, 2017, Pages 316-326]
Afrasiab, Hamed Vibration analysis of a microplate in contact with a fluid based on the modified couple stress theory [Volume 17, Issue 2, 2017, Pages 47-57]
Afsharfard, Aref Experimental study of galloping-based energy harvesting system using piezoelectric materials [Volume 17, Issue 10, 2018, Pages 233-241]
Afshari, Abbas Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
Afshari, Ebrahim New interior design for polymer flow membrane fuel cell flow field to improve performance for use in an aerial vehicle [Volume 17, Issue 12, 2018, Pages 297-308]
Afzali, Fatemeh Fabrication and Thermal Modeling of Unglazed Transpired Solar Air Heater Collectors with metallic (Steel) and non-metallic absorber plates [Volume 17, Issue 9, 2017, Pages 339-350]
Afzalian, Mahdi Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment [Volume 17, Issue 2, 2017, Pages 275-283]
Afzalian, Mahdi Effects of air change rate on comfort, air quality and energy consumption in an amphitheater with under-floor air distribution system [Volume 17, Issue 2, 2017, Pages 284-294]
Aghababaie Beni, Mahdi A study of fluid media and size effect on dynamic response of microplate [Volume 17, Issue 9, 2017, Pages 153-164]
Aghaie-Khafri, Mehrdad Simulation and experimental study of severe plastic deformation of 7075 Al alloy processed by repetitive upsetting-extrusion [Volume 17, Issue 8, 2017, Pages 323-332]
Aghakouchak, Aliakbar Determination of blast pressure distribution around cylindrical shape based on numerical simulation of explosion [Volume 17, Issue 2, 2017, Pages 19-28]
Agheli Haji Abadi, Mohammad Mahdi Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
Ahangar, Mahdy Analytical Investigation of Anode Electrothermal Process in a MPD Thruster [Volume 17, Issue 2, 2017, Pages 77-84]
Ahangar, Shima Designing backstepping controller for positionforce tracking of cooperative robot manipulators [Volume 17, Issue 9, 2017, Pages 45-54]
Ahangar Zonouzi, Sajjad Numerical modeling of magnetic nanofluid pumping in a closed cooling loop by using magnetic field and thermomagnetic effect [Volume 17, Issue 11, 2018, Pages 109-117]
Ahmadi, Hamed Static analysis of transversely anisotropic laminates using improved zig-zag theory subjected to sinusoidal load [Volume 17, Issue 4, 2017, Pages 393-398]
Ahmadi, Hamed Experimental study of projectiles with flat, conical and hemispherical nose shapes on low velocity impact on GLARE 3 [Volume 17, Issue 7, 2017, Pages 109-118]
Ahmadi, Hamed Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2018, Pages 42-46]
Ahmadi, Hamed Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach [Volume 17, Issue 12, 2018, Pages 505-513]
Ahmadi, Hojjat Intelligent fault diagnosis of cooling radiator based on thermal image processing and artificial intelligence techniques [Volume 17, Issue 2, 2017, Pages 240-250]
Ahmadi, Mosayeb The Investigation of mechanical and metallurgical properties of multi-layered Al/Cu composite produced by Accumulative Press Bonding (APB) process [Volume 17, Issue 2, 2017, Pages 109-114]
Ahmadi, Rouhollah 3D Simulation of Performance and Pollution of Hydrogen-Diesel Combustion in Heavy Duty Engine [Volume 17, Issue 3, 2017, Pages 177-186]
Ahmadi, Rouhollah Thermo-economic analysis with reliability consideration of a hybrid system of Gas Turbine, SOFC and Multiple Effect Desalination [Volume 17, Issue 10, 2018, Pages 321-332]
Ahmadi Brooghani, Seyed Yousef Investigation on the effect of period of temperature variation in intermittent drying of clay [Volume 17, Issue 8, 2017, Pages 17-28]
Ahmadifar, Hirbod Thermoelastic buckling of functionally graded rectangular plate based on improved third order shear deformation theory [Volume 17, Issue 9, 2017, Pages 36-44]
Ahmadi Khiyavi, Omid Dynamic Behavior of a Turbojet Engine in Response to Fuel Flow Rate [Volume 17, Issue 1, 2017, Pages 23-30]
Ahmadi Nadooshan, Afshin Exact solutions of flow between two concentric pipes and flow over porous wall by a new couple-stress theory [Volume 17, Issue 2, 2017, Pages 369-376]
Ahmadi Nadooshan, Afshin Effects of Fin Presence and change the Aspect Ratio on Natural Convection in Coaxial Annuli [Volume 17, Issue 3, 2017, Pages 10-18]
Ahmadi Nadooshan, Afshin Numerical study of non-Newtonian fluid convection by power law model in a square enclosure with central heating source [Volume 17, Issue 11, 2018, Pages 343-352]
Ahmadi Najafabadi, Mehdi AE- based damage investigation in composite laminates under low-velocity impact tests [Volume 17, Issue 7, 2017, Pages 91-100]
Ahmadi Najafabadi, Mehdi The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
Ahmadi Najafabadi, Mehdi Investigation of failure mechanisms of notched aluminum plates repaired with composite patches using acoustic emission method [Volume 17, Issue 8, 2017, Pages 406-412]
Ahmadkhah, Saeed Crack Depth Profiling in Metallic Structures through ACFM Data using Type-II Fuzzy Logic System [Volume 17, Issue 8, 2017, Pages 153-163]
Ahmadvand, Hamid Effects of various parameters on dynamic stall behavior and aerodynamic coefficients of a NACA0012 airfoil [Volume 17, Issue 4, 2017, Pages 359-368]
Akbari, Ahmad Robust Model Predictive Control for Active Suspension System using Linear Matrix Inequalities [Volume 17, Issue 12, 2018, Pages 183-192]
Akbari, Ali Akbar The Novel Control Method for Voice Coil Actuator Fatigue Testing Machine [Volume 17, Issue 7, 2017, Pages 79-90]
Akbari, Davood Analysis of Laser Interfrometry Parameters in the Evaluation of Defects in the Polymer Matrix Composites [Volume 17, Issue 9, 2017, Pages 372-380]
Akbari, Davood Effect of edge preparation on residual stress of welding in dissimilar joints [Volume 17, Issue 7, 2017, Pages 307-315]
Akbari, Davood Application of pre-heating in the reduction of residual stress in the repair welds of steel pipes [Volume 17, Issue 12, 2018, Pages 5-10]
Akbari, Hossein Proposing an index for qualitative comparison of six-axis force/torque sensors and optimization of Maltese cross geometry to reduce cross-coupling error [Volume 17, Issue 10, 2018, Pages 153-164]
Akbari, Nozar Numerical simulation of active control of instabilities in an axial compressor under distorted inlet flow [Volume 17, Issue 1, 2017, Pages 193-202]
Akbari, Nozar Optimization and advanced exergy evaluation of a Clausius-Rankine cycle to be used in solar power systems [Volume 17, Issue 7, 2017, Pages 333-342]
AKBARI, Ali Akbar Trajectory design of harmonic loading machine input by central pattern generator [Volume 17, Issue 12, 2018, Pages 423-434]
Akbaripanah, Farshad Low velocity impact analysis of functionally graded ceramic-metal beam in simply and clamped supported boundary conditions [Volume 17, Issue 10, 2018, Pages 112-122]
Akbari Shah Khosravi, Naeim The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
Akbarizadeh, Gholamreza Point-cloud lossless compression new algorithm by merging gray-coded structured light series patterns and compression of two-dimensional single channel matrix [Volume 17, Issue 11, 2018, Pages 371-379]
Akbarpour, Abolfazel Modeling of groundwater flow in unconfined aquifer in steady state with meshless local Petrov-Galerkin [Volume 17, Issue 2, 2017, Pages 393-403]
Akbarzadeh, Alireza Agility enhancement using an assistive controller for exoskeleton robots [Volume 17, Issue 9, 2017, Pages 119-129]
Akbarzadeh, Alireza Numerical and Experimental Investigation of Optimization of Photovoltaic Thermal System, Using Taguchi Method [Volume 17, Issue 8, 2017, Pages 75-86]
Akbarzadeh, Pooria MHD flow of a nanofluid inside a peristaltic curved porous channel with internal heat source [Volume 17, Issue 10, 2018, Pages 165-175]
Akbarzadeh Kalat, Ali Observer-Based Robust Adaptive Fuzzy Approach for Current Control of Robot Manipulators by Estimation of Uncertainties [Volume 17, Issue 6, 2017, Pages 286-294]
Akbarzadeh Tootoonchi, Alireza A new mapping method for joint and Cartesian stiffness, damping and mass matrices for large displacement in impedance control [Volume 17, Issue 1, 2017, Pages 117-128]
Akbarzadeh Tootoonchi, Alireza Analytical dynamic of a rotating prismatic actuator with variable stiffness and validation with finite element method [Volume 17, Issue 3, 2017, Pages 79-86]
Akbarzadeh Tootoonchi, Alireza Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
Akhoundi, Behnam Effect of printing parameters on Mechanical Strength of Polymer-Metal composites Printed via FDM 3D printer [Volume 17, Issue 1, 2017, Pages 145-150]
Akramian, Mohsen Stability analysis and state feedback controller design for networked control systems with time varying delays [Volume 17, Issue 5, 2017, Pages 77-85]
Alavipour, Mojtaba Optimal Multiple-Burn Injection of a Satellite into Geostationary orbit Using an Upper Stage [Volume 17, Issue 6, 2017, Pages 157-167]
Alaviyoun, Seyed Shahabeddin Experimental thermal investigation of turbocharger in internal combustion engine and considering effect of electrical water pump on heat soak test [Volume 17, Issue 12, 2018, Pages 266-274]
Alemi Arani, Hamed Numerical Analysis on the Effects of Impeller Geometry Parameters for a Centrifugal Pump in Reverse Operation [Volume 17, Issue 9, 2017, Pages 13-24]
Aliasgharpour, Mohammadamin Optimizing the Rate of Penetration (ROP) in Rotary Drilling System by using new Robust Model Predictive Control [Volume 17, Issue 5, 2017, Pages 413-418]
Aliee, Mohammad Hossein Multi objective optimization and statistic sensitivity analysis of solid oxide fuel cell-gas turbine hybrid system fed by biogas in urban wastewater treatment plants [Volume 17, Issue 3, 2017, Pages 239-250]
Alipoor, Alireza Simulation of compressible multimaterial flow by 2D hydrodynamic code [Volume 17, Issue 2, 2017, Pages 211-220]
Alipour, Ali Propellant Management Device (PMD) Design Optimization of Hydrazine Fuel Tank [Volume 17, Issue 7, 2017, Pages 152-160]
Alipour, Khalil Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
Alipour, Khalil Deriving equations of motion of a wheeled mobile robot and its control using extended multiple impedance strategy [Volume 17, Issue 5, 2017, Pages 394-404]
Alipour, Khalil Trajectory tracking of a tractor-trailer robot using model predictive control [Volume 17, Issue 11, 2018, Pages 210-218]
Alipour, Mohammad Investigation of the microstructure and mechanical properties of cast AA7068 nanocomposite reinforced with graphene nano plates [Volume 17, Issue 10, 2018, Pages 139-144]
Ali Tavoli, Majid The Influence of Pre- Mechanical Friction Stir Processing on Stress State dependent Ductile Damage of 7075-T6 Aluminum Alloy [Volume 17, Issue 1, 2017, Pages 365-374]
Ali Tavoli, Majid Experimental Investigation and Numerical Simulation of Fluid-Structure Interaction on Hydroforming Process of Triangular Plates Under Impact Loading [Volume 17, Issue 12, 2018, Pages 114-122]
Ali Tavoli, Majid Experimental and numerical investigation into the effect of different pressure curves on the thickness variations in hydroforming process of metal plates [Volume 17, Issue 12, 2018, Pages 337-344]
Alizadeh, Ebrahim A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2018, Pages 312-320]
Alizadeh, Mansour The Modification of the Conventional Genetic Algorithm for Solving Inverse Heat Transfer Problems [Volume 17, Issue 11, 2018, Pages 408-418]
Alizadeh, Mohsen Investigation of displacement amplitude effect on failure mechanisms in open-hole laminated composites under low-cycle fatigue loading using acoustic emission [Volume 17, Issue 12, 2018, Pages 435-445]
Alizadeh, Yoness Fracture assessment of specimens weakened by U-notch made of functionally graded materials under mode I loading [Volume 17, Issue 2, 2017, Pages 1-9]
Alizadeh Kaklar, Zahra Numerical simulation of two-phase flow within an effervescent atomizer using volume of fluid model [Volume 17, Issue 7, 2017, Pages 59-67]
Allahverdizadeh, Akbar Design and fabrication of an autonomous mobile robot equiped with color lasers and its trajectory control based on machine vision [Volume 17, Issue 6, 2017, Pages 213-220]
Aloui, Fathi Investigation of turbulent slot impinging jet using laser doppler anemometry method â Experimental research and error analysis [Volume 17, Issue 4, 2017, Pages 92-100]
Amanifard, Nima Numerical analysis of the electric field effect on mass transfer through
a moist object [Volume 17, Issue 1, 2017, Pages 383-393]
Ameri, Mehran study of a direct-expansion ground source heat pump using carbon dioxide [Volume 17, Issue 6, 2017, Pages 433-443]
Ameri, Mehran Fabrication and Thermal Modeling of Unglazed Transpired Solar Air Heater Collectors with metallic (Steel) and non-metallic absorber plates [Volume 17, Issue 9, 2017, Pages 339-350]
Ami ahmadi, Hesam Numerical simulation of micro/nano magnetic particles movement in bloodstream considering interaction of particles [Volume 17, Issue 4, 2017, Pages 307-314]
Amidpour, Majid Total site cogeneration and desalination system integration assessment using R-curve [Volume 17, Issue 4, 2017, Pages 225-236]
Amidpour, Majid Developing a design method for optimal geometric and operating parameters of triple pressure heat recovery steam generator using the constructal theory [Volume 17, Issue 5, 2017, Pages 335-345]
Amidpour, Majid Design and Parametric Study of Three Stream Plate-Fin Heat Exchangers with Rectangular Fins [Volume 17, Issue 8, 2017, Pages 377-387]
Aminaei, Hamzeh Numerical estimation of the wing boundary layer transition in propeller flowfield [Volume 17, Issue 2, 2017, Pages 157-165]
Aminfar, Mohammadhossein Experimental study on corrosion detection of prestressed pipe using Acoustic Emission method [Volume 17, Issue 8, 2017, Pages 231-240]
Aminfar, Mohammad Hossein Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of prestressed pipe monitoring using Acoustic Emission technique [Volume 17, Issue 2, 2017, Pages 306-314]
Amini, Saeid Investigation of experimental and numerical simulation of residual stresses distribution of rolling mill rolls in ultrasonic peening technology [Volume 17, Issue 7, 2017, Pages 316-324]
Amirabadi, Hossein Modeling and optimizing lapping process of 440C steel by Neural Network and Multi-objective particle swarm optimization algorithm [Volume 17, Issue 8, 2017, Pages 201-212]
Amirabdolahian, Saeed Enhancement of latent heat thermal storage using natural convection deflection [Volume 17, Issue 5, 2017, Pages 267-275]
Amiri, Hossein Numerical simulation of thermal effects of continuous wave laser on living tissue with blood perfusion [Volume 17, Issue 4, 2017, Pages 125-133]
Amiri, Hossein Fabrication and Thermal Modeling of Unglazed Transpired Solar Air Heater Collectors with metallic (Steel) and non-metallic absorber plates [Volume 17, Issue 9, 2017, Pages 339-350]
Amiri, Maryam Experimental and Numerical Investigations on the Aerodynamic Performance of a Hinged Bladed Vertical Axis Wind Turbine [Volume 17, Issue 5, 2017, Pages 21-30]
Amiri, Paria Investigation of Temperature Field and Laminar Flame Structure of Inclined Impinging Jets by Interferometry Mach-Zehnder Experimental Method [Volume 17, Issue 6, 2017, Pages 233-240]
Amjadi, Mohammad Sadegh Study of heat-affected zone (HAZ) caused by cutting of Thin Ti-CP Sheet via CW CO2 Laser [Volume 17, Issue 5, 2017, Pages 253-259]
Amnian, Javad Offering an analytical relation for estimation of pollution in enclosed parking lots and expressing the corrective suggestions for improving national building regulations of Iran [Volume 17, Issue 2, 2017, Pages 385-392]
Amozegary, Fatemeh Modeling of large scale relative motion of two satellite in elliptical orbit [Volume 17, Issue 2, 2017, Pages 187-198]
Analooee, Ali Collision-Free Navigation and Control for Autonomous Vehicle in Complex Urban Environments [Volume 17, Issue 11, 2018, Pages 277-288]
Anaraki Haji Bagheri, Alaleh Numerical study of three dimensional instability of nonlinear viscoelastic fluid flow around a sphere [Volume 17, Issue 12, 2018, Pages 213-222]
Anbarlooei, Hamid Reza Simulation of compressible multimaterial flow by 2D hydrodynamic code [Volume 17, Issue 2, 2017, Pages 211-220]
Anbarsooz, Morteza Numerical study of the performance of an oscillating wave surge converter using volume of fluid method [Volume 17, Issue 6, 2017, Pages 265-276]
Ansari, Mohamadreza Numerical simulation of upward co-current gas-liquid two-phase flow in the vertical pipes of large diameter, by volume of fluid method [Volume 17, Issue 1, 2017, Pages 441-452]
Ansari, Mohamadreza Numerical simulation of hydro-dynamics of a high-speed planning hull with two degrees of freedom [Volume 17, Issue 2, 2017, Pages 231-239]
Ansari, Mohamadreza Numerical modeling of air bubbles entrainment in liquid slug body at Horizaontal duct [Volume 17, Issue 4, 2017, Pages 177-187]
Ansari, Mohamadreza Evaluation of the slug two-phase flow parameters in a horizontal two-dimensional duct [Volume 17, Issue 4, 2017, Pages 349-358]
Ansari, Reza Nonlinear vibration analysis of conical shells using a numerical strategy [Volume 17, Issue 1, 2017, Pages 210-220]
Ansari, Reza Micromechanical analysis of the effects of adding silica nanoparticles on the elastoplastic behavior of polymeric nanocomposites considering interphase [Volume 17, Issue 9, 2017, Pages 319-326]
Ansari, Reza Effect of Different Environmental Conditions on Impact Properties of FMLs Hybridized with Nanoclay [Volume 17, Issue 12, 2018, Pages 193-203]
Anvari, Zolfa The Mechanical interference-free workspace of the planar parallel robots using geometric approach [Volume 17, Issue 4, 2017, Pages 101-110]
Arabi, Amirmasoud Improving shear strength in nanocomposites through electrophoretic deposition of carbon nanotubes [Volume 17, Issue 1, 2017, Pages 462-472]
Arabi, Seyed Hasan Influence of heat-input on mechanical behavior and phase balance of 2304 duplex stainless steel resistance spot welds [Volume 17, Issue 5, 2017, Pages 159-165]
Arabkhalaj, Arash Study of the Influences of Unsteadiness on the Multicomponent Fuel Droplets [Volume 17, Issue 1, 2017, Pages 293-304]
Arab Maleki, Vahid Vibration Characteristics of Fluid-Conveying Pipes in presence of a Dynamic Vibration Absorber [Volume 17, Issue 7, 2017, Pages 31-38]
Arbab Tafti, Mohammad Reza Nonlinear vibrations and stability analysis of a micro rotating shaft by considering the modified couple stress theory and micro inertia effect [Volume 17, Issue 4, 2017, Pages 134-142]
Arghavani, Jamal Finite element simulation of selective laser melting process for fabrication of a sample part under various support conditions [Volume 17, Issue 4, 2017, Pages 143-153]
Arghavani Hadi, Jamal Dynamic analysis of a shape memory alloy beam [Volume 17, Issue 12, 2018, Pages 223-233]
Asadi, Azita Solving time-dependent problems using the generalized exponential basis functions method [Volume 17, Issue 10, 2018, Pages 271-280]
Asadi Matak, Mojtaba Design of stable nonlinear guidance of an underwater vehicle in the ship wake via estimated path by particle filter [Volume 17, Issue 5, 2017, Pages 260-266]
Asadipoor, Navid Providing an analytical model and experimental study of the behavior of cortical bone drilling the thrust force [Volume 17, Issue 5, 2017, Pages 175-184]
Asemani, Hamidreza Analysis of Laser Interfrometry Parameters in the Evaluation of Defects in the Polymer Matrix Composites [Volume 17, Issue 9, 2017, Pages 372-380]
Asgari, Haniye Simulation of oxygen pressure and nanoparticle FMISO concentration in tissue by considering a real capillary network [Volume 17, Issue 11, 2018, Pages 125-132]
Asgharnia, Amir Hossein Pitch Angle Control of a High-Power Wind Turbine Using Optimal Fractional-order PID Controller [Volume 17, Issue 3, 2017, Pages 167-176]
Ashorynejad, Hamid Reza Numerical study of heat transfer and entropy generation of RayleighâBÙenard convection nanofluid in wavy cavity with magnetic field [Volume 17, Issue 10, 2018, Pages 385-396]
Ashrafi Tafreshi, Amin Study of electrohydraulic forming process by using experimental observations and numerical simulation with ALE method [Volume 17, Issue 4, 2017, Pages 299-306]
Ashrafizadeh, Ali Propane and Butane Gas Liquefaction Cycle Optimization Considering Compressor Technical Limitations with Genetic Algorithm [Volume 17, Issue 2, 2017, Pages 315-324]
Ashrafizadeh, Ali Operational Minimization of Multi-Stage Refrigeration Cyclesâ Power Consumption in Gas Refineries Based on the Combination of Thermodynamics Analysis and Pinch Technology [Volume 17, Issue 6, 2017, Pages 1-12]
Askari, Javad Fractional order sliding mode controller design for quadrotor system [Volume 17, Issue 5, 2017, Pages 287-294]
Askari Farsangi, Mohammad Amin An investigation on effectiveness of dimension on Magnetic Shape Memory Alloy based energy harvester with two different configurations [Volume 17, Issue 1, 2017, Pages 136-144]
Assasi, Ahmad Nonlinear Control of Air path in a Turbocharged Diesel Engine Using Optimization [Volume 17, Issue 6, 2017, Pages 168-178]
Assimi, Hirad Sizing and topology optimization of spatial truss structures using hybrid algorithm of genetic programing and Nelder-Mead [Volume 17, Issue 6, 2017, Pages 32-40]
Ataei, Mohammad Stability analysis and state feedback controller design for networked control systems with time varying delays [Volume 17, Issue 5, 2017, Pages 77-85]
Ataei, Mohammad High-Gain Observers for a Class of Nonlinear Systems with Simultaneous and Different Delay at State, Input and Output [Volume 17, Issue 12, 2018, Pages 463-468]
Atai, Ali Asghar Topology, shape and size optimization of 3 D tensegrity structures with specified number of members under external loads [Volume 17, Issue 4, 2017, Pages 255-266]
Atrainfar, Hajar Trajectory tracking of a VTOL aircraft with uncertainty and disturbances [Volume 17, Issue 8, 2017, Pages 68-74]
Avami, Akram Multi objective optimization and statistic sensitivity analysis of solid oxide fuel cell-gas turbine hybrid system fed by biogas in urban wastewater treatment plants [Volume 17, Issue 3, 2017, Pages 239-250]
Ayati, Moosa Online proportional myoelectric control of a humanoid shoulder motions using electromyogram signals [Volume 17, Issue 9, 2017, Pages 1-12]
Azadi, Mohammad Investigation of displacement amplitude effect on failure mechanisms in open-hole laminated composites under low-cycle fatigue loading using acoustic emission [Volume 17, Issue 12, 2018, Pages 435-445]
Azadi, Reza Numerical simulation of hydro-dynamics of a high-speed planning hull with two degrees of freedom [Volume 17, Issue 2, 2017, Pages 231-239]
Azadi, Shahram Design of decision-making lane change algorithm of truck-semitrailer in real dynamic environment [Volume 17, Issue 9, 2017, Pages 351-360]
Azadi, Shahram The Design of Adaptive Cruise Control based on Macroscopic Traffic behavior applying Model Predictive Control to reduce Pile up [Volume 17, Issue 10, 2018, Pages 81-92]
Azadi, Shahram Collision-Free Navigation and Control for Autonomous Vehicle in Complex Urban Environments [Volume 17, Issue 11, 2018, Pages 277-288]
Azarbayejani, Iman Stress and strain distribution pattern investigation in multi-layer elastic hand prosthesis, inspired by the human skin structure [Volume 17, Issue 5, 2017, Pages 346-352]
Azarpazhoo, Sayyed Ali Dynamic analysis of long thick cylindrical shell subjected to dynamic internal pressure using high order shear deformation theory [Volume 17, Issue 9, 2017, Pages 427-438]
Azarshab, Amin Fault detection in nonlinear dynamical systems using multi-sensor data fusion based on Hybrid Extended Information Filter [Volume 17, Issue 2, 2017, Pages 413-419]
Azdast, Taher The Effect of Low Power CO2 Laser Cutting Process Parameters on Polycarbonate Cut Quality Produced By Injection Molding [Volume 17, Issue 2, 2017, Pages 93-100]
Azhdary Moghaddam, Mehdi Numerical Modelling of Water Entrance into a Wet Tank Using a Modified Wave Propagation Algorithm [Volume 17, Issue 4, 2017, Pages 168-176]
Azimi, Ali A comparison between polydispersed and monodispersed radius modeling techniques of droplets in condensing steam flow in a supersonic nozzle by Eulerian-Lagrangian method [Volume 17, Issue 10, 2018, Pages 47-57]
Azimi, Asghar Study of the Influences of Unsteadiness on the Multicomponent Fuel Droplets [Volume 17, Issue 1, 2017, Pages 293-304]
Azimi, Aziz Numerical simulation of the non-Fourier heat conduction of the single-phased âand dual-phased lagging in sand: local thermal equilibrium [Volume 17, Issue 3, 2017, Pages 446-450]
Azimian, Ahmad Reza Investigation of turbulent slot impinging jet using laser doppler anemometry method â Experimental research and error analysis [Volume 17, Issue 4, 2017, Pages 92-100]
Azizi, Saber Dynamic analysis of a micro beam based on sub-harmonic parametric excitation [Volume 17, Issue 5, 2017, Pages 374-384]
Azizi, Zahra Prediction of central bursting defects in the plane strain extrusion process using upper bound method [Volume 17, Issue 11, 2018, Pages 361-370]
Azizkhani, Atefeh Design and Practical Implementation of a Fractional Order PID Controller for a Single Flexible-Link Robot [Volume 17, Issue 10, 2018, Pages 411-419]
B
Babaei, Hashem Experimental Investigation and Numerical Simulation of Fluid-Structure Interaction on Hydroforming Process of Triangular Plates Under Impact Loading [Volume 17, Issue 12, 2018, Pages 114-122]
Babaei, Reza Numerical investigation of the damaged area of GLARE® under oblique impact of the AP projectile with medium caliber [Volume 17, Issue 3, 2017, Pages 367-375]
Babaei, Saeid A novel numerical method for fatigue life prediction under non-proportional loadings [Volume 17, Issue 5, 2017, Pages 232-242]
Babaei Robat, Arsalan Trajectory tracking of a tractor-trailer robot using model predictive control [Volume 17, Issue 11, 2018, Pages 210-218]
Babolhavaeji, Mohammad Micro-vascular channel based self-healing fibrous composites under transverse loading [Volume 17, Issue 5, 2017, Pages 63-68]
Badamchizadeh, Mohammadali Single-rod electro-hydraulic servo system control with sliding mode controller improved by parallel fuzzy compensators [Volume 17, Issue 2, 2017, Pages 377-384]
Badrkhani, Vahid Development of implicit Algorithm for High-order discontinuous Galerkin methods to solve compressible flows using Newton-Krylov methods [Volume 17, Issue 3, 2017, Pages 281-292]
Badrossamay, Mohsan Study of heat-affected zone (HAZ) caused by cutting of Thin Ti-CP Sheet via CW CO2 Laser [Volume 17, Issue 5, 2017, Pages 253-259]
Baghani, Mostafa A finite element analysis for shape memory polymer Timoshenko beams [Volume 17, Issue 8, 2017, Pages 351-359]
Baghani, Mostafa Design and Analysis of a knee-ankle-foot orthosis using torsional spring [Volume 17, Issue 10, 2018, Pages 185-193]
Baghani, Mostafa Torsional modeling and experimental characterization of a shape memory alloy rod, using Brinsonâs asymmetric model [Volume 17, Issue 12, 2018, Pages 469-477]
Bagheri, Hamed Effect of Blade Surface Roughness on Performance of a Low-Pressure Steam Turbine Stage [Volume 17, Issue 8, 2017, Pages 29-37]
Bagheri, Sina Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
Bagherian Jafarabadi, Mohammad Ali Design and Prototyping of a Haptic User Interface based on Head Movements for Patients with Cervical Spinal Cord Injury [Volume 17, Issue 5, 2017, Pages 52-62]
Bagheri Fahraji, Ehsan Dynamic Modeling of Air to Air Variable Refrigerant Flow Heat Pump System [Volume 17, Issue 11, 2018, Pages 397-407]
Baheri Islami, Sima Dynamic Behavior of a Turbojet Engine in Response to Fuel Flow Rate [Volume 17, Issue 1, 2017, Pages 23-30]
Bahman Jahromi, Iman Experimental Study of the Noise Sources from a Hot Supersonic Jet Impinging on a Flat Plate at Initial Stages of Jet Formation [Volume 17, Issue 2, 2017, Pages 359-368]
Bahonar, Mohammad Javad Solving time-dependent problems using the generalized exponential basis functions method [Volume 17, Issue 10, 2018, Pages 271-280]
Bahrabadi jovein, Iman Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers [Volume 17, Issue 3, 2017, Pages 425-436]
Bahrainian, Seyed Saied Modeling and simulation of cuttings transfer during well drilling with foam [Volume 17, Issue 10, 2018, Pages 281-291]
Bahramizadeh, Ebrahim Investigation on microstructure and wear resistance of in-situ composites coating product by gas tungsten arc welding on 304 stainless steel [Volume 17, Issue 5, 2017, Pages 119-128]
Baigzadehnoi, Barmak Designing backstepping controller for positionforce tracking of cooperative robot manipulators [Volume 17, Issue 9, 2017, Pages 45-54]
Bakhsheshy, Ali Free Vibration Analysis of Functionally Graded Viscoelastic Plate [Volume 17, Issue 3, 2017, Pages 143-149]
Bakhshi, Mohammad Investigation of the effective parameters in the bulging process and obtaining Forming limit curve of the stainless steel tube by the GTN criterion [Volume 17, Issue 6, 2017, Pages 365-376]
Bakhshi, Mohammad Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method [Volume 17, Issue 11, 2018, Pages 311-322]
Bakhshi Jooybari, Mohammad Investigation of Wrinkling in Hydrodynamic Deep Drawing assisted by Radial Pressure with Inward Flowing Liquid Based on a Geometric Method [Volume 17, Issue 5, 2017, Pages 276-286]
Bakhshi Jooybari, Mohammad Theoretical Investigation of Internal Cavitation on the FLD of IF Steel Using M-K Model and Gurson Plastic Potential Function [Volume 17, Issue 11, 2018, Pages 353-360]
Bakhtiari, Arash Experimental investigation of butt weld friction stir welding of IF steel with thickness of 0.7 mm [Volume 17, Issue 5, 2017, Pages 69-76]
Bakhtiari, Majid Modeling of large scale relative motion of two satellite in elliptical orbit [Volume 17, Issue 2, 2017, Pages 187-198]
Bakhtiari, Majid A New Approaches for Satellite Constellation Design to Regional Coverage Using GDOP [Volume 17, Issue 5, 2017, Pages 193-200]
Bakhtiari Shahri, Mohsen Optimal fuzzy controller design for beyond pull-in stabilization of circular micro-plates [Volume 17, Issue 1, 2017, Pages 151-160]
Bandar Saheby, Eman Design and numerical analysis of Mach 3.0 inlet [Volume 17, Issue 4, 2017, Pages 199-208]
Bandizaki, Ali Evolutionary vertex forming limit model in development of diffuse to localized viscoplastic instability of sheets [Volume 17, Issue 12, 2018, Pages 204-212]
Baniassadi, Majid Experimental investigation of the effect of temperature in extrusion process of ECAPed nanostructured Titanium [Volume 17, Issue 4, 2017, Pages 52-60]
Baniassadi, Majid A finite element analysis for shape memory polymer Timoshenko beams [Volume 17, Issue 8, 2017, Pages 351-359]
Barati, Ehsan A new relation for equalization of load spectrum to a constant amplitude load suitable for fatigue laboratory testing [Volume 17, Issue 11, 2018, Pages 31-38]
Barghandan, Saeed Single-rod electro-hydraulic servo system control with sliding mode controller improved by parallel fuzzy compensators [Volume 17, Issue 2, 2017, Pages 377-384]
Barkhordari, Hooshang Micromechanical modeling of effective elastic properties of hybrid nanocomposites reinforced by fuzzy fiber containing carbon nanotubes [Volume 17, Issue 9, 2017, Pages 261-272]
Barzegary, Mojtaba Investigating Stress Urinary Incontinence in Women Using Computational Methods and Clinical Data [Volume 17, Issue 5, 2017, Pages 419-429]
Barzgaran, Mina A Weakly Coupled Scheme for Modelling Bedload Sediment Transport Using an Augmented Riemann Solver [Volume 17, Issue 9, 2017, Pages 409-416]
Basati, Yaser Geometry and Zeta Potential Effects on Electroosmotic Mixing in Converging (Diverging) Microchannel using Lattice Boltzmann Method [Volume 17, Issue 6, 2017, Pages 331-341]
Baseri, Hamid An experimental and simulation study of flow balance in multi-cavity plastic injection molds [Volume 17, Issue 4, 2017, Pages 285-289]
Bashtany, Javad Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers [Volume 17, Issue 3, 2017, Pages 425-436]
Basohbat Novinzadeh, Alireza Model-Free Adaptive Controller Design for Nonlinear system of an Air Vehicle pitch channel [Volume 17, Issue 11, 2018, Pages 161-171]
Basohbat Novinzadeh, Ali Reza Design of stable nonlinear guidance of an underwater vehicle in the ship wake via estimated path by particle filter [Volume 17, Issue 5, 2017, Pages 260-266]
Basti, Ali Investigation of the incremental tube forming process and the influence of the vital process parameters on the quality of final product [Volume 17, Issue 7, 2017, Pages 295-306]
Basti, Ali The effective investigation of the general stress state on the forming limit of the anisotropic aluminum sheet by using extended M-K model [Volume 17, Issue 11, 2018, Pages 192-198]
Bataleblu, Aliasghar Multi-Objective Multidisciplinary Design Optimization of a General Aviation Aircraft [Volume 17, Issue 2, 2017, Pages 199-210]
Batooei, Alireza A numerical investigation of Nusselt number and friction coefficient in an arc-type Stirling engine heater [Volume 17, Issue 4, 2017, Pages 85-91]
Bayat, Amar Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2018, Pages 42-46]
Bayat, Mohammad Experimental study of projectiles with flat, conical and hemispherical nose shapes on low velocity impact on GLARE 3 [Volume 17, Issue 7, 2017, Pages 109-118]
Bayati Chaleshtari, Mohammad Hossein Optimization of finite metallic plates with quadrilateral cutout subjected to in- plane loading by Ant Lion Optimizer [Volume 17, Issue 1, 2017, Pages 11-22]
Bazargan, Majid Numerical Investigation of the Piston Effect of Supercritical Fluid under Microgravity Conditions Using Lattice Boltzmann Method [Volume 17, Issue 5, 2017, Pages 138-146]
Bazrgar, Mohammad Javad Numerical Analyses of the Vortical Flow over the Cranked Kite Wing in Ground Proximity [Volume 17, Issue 4, 2017, Pages 41-51]
Beglari, Mahdieh Design of Geosynchronous Satellite Flying Formation Based on Translational Dynamics Affected by Attitudinal Situation at Drift Phase [Volume 17, Issue 9, 2017, Pages 107-118]
Behbahani, Saeed A novel Lyapunov function for stability of haptic device in simulating virtual objects [Volume 17, Issue 10, 2018, Pages 367-374]
Behravesh, Amir Hossein Effect of printing parameters on Mechanical Strength of Polymer-Metal composites Printed via FDM 3D printer [Volume 17, Issue 1, 2017, Pages 145-150]
Behroozi, Behrooz Effect of Micro-Channel Wall Thickness and Diameter on Inlet Gas Temperature and Velocity under the Influence of Thermal Creeping [Volume 17, Issue 4, 2017, Pages 154-160]
Beigzadeh, Borhan Improving transparency in bilateral teleoperation systems based on model-mediated approach [Volume 17, Issue 1, 2017, Pages 273-283]
Beigzadeh, Borhan Numerical simulation of micro/nano magnetic particles movement in bloodstream considering interaction of particles [Volume 17, Issue 4, 2017, Pages 307-314]
Beigzadeh, Borhan Simulation and impedance control of the grasping of a spherical object with soft contact surfaces [Volume 17, Issue 7, 2017, Pages 9-19]
Benyounis, Khaled Y. The Effect of Low Power CO2 Laser Cutting Process Parameters on Polycarbonate Cut Quality Produced By Injection Molding [Volume 17, Issue 2, 2017, Pages 93-100]
Bijari, Haniyeh Developing the thermal comfort model based on cutaneous thermoreceptors response using non-Fourier heat transfer equation [Volume 17, Issue 11, 2018, Pages 70-76]
Binesh, Behzad Simulation and experimental study of severe plastic deformation of 7075 Al alloy processed by repetitive upsetting-extrusion [Volume 17, Issue 8, 2017, Pages 323-332]
Bin Mardi, Noor Azizi Real-time estimation of micro-milling cutting tool deflections by using signals of stages driven by linear motors [Volume 17, Issue 6, 2017, Pages 357-364]
Boghrati, Mehdi Comparison of effects of adding various carbon nanotube concentrations and increase C/H mass ratio of liquid fuels on combustion behavior and flame thermal radiation [Volume 17, Issue 9, 2017, Pages 205-213]
Bondar Saheby, Eiman Effect of thick boundary layer ingestion on the performance of hypersonic inlet [Volume 17, Issue 10, 2018, Pages 73-80]
Borji Monfared, Sadra Design of Robust H_â Control for Stabilizing of Stratospheric Airship with Parametric Uncertainty and External Disturbance [Volume 17, Issue 3, 2017, Pages 216-226]
Boromand, Bijan A New Method for Bending Analysis of Nano Beam and Rectangular Nano Plate: Full Modified Nonlocal Theory [Volume 17, Issue 3, 2017, Pages 376-384]
Bozorgian, Mohammad Numerical Investigation of Lateral jet interaction effects on aerodynamic behavior of a supersonic projectile [Volume 17, Issue 4, 2017, Pages 431-442]
Bozorgpoor, Reza Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
C
Carlomagno, Giovanni Maria Intelligent fault diagnosis of cooling radiator based on thermal image processing and artificial intelligence techniques [Volume 17, Issue 2, 2017, Pages 240-250]
Cervantes, Michel The evaluation of friction models to calculate the flow rate in pressure-time method [Volume 17, Issue 8, 2017, Pages 360-368]
Chaibakhsh, Ali Comparison between empirical mode decomposition and wavelet transform for unbalance detection on rotating machinery using optimized support vector machine [Volume 17, Issue 2, 2017, Pages 325-332]
Charkhi, mehran Application of pre-heating in the reduction of residual stress in the repair welds of steel pipes [Volume 17, Issue 12, 2018, Pages 5-10]
Charmiyan, Mahmood Investigation of turbulent slot impinging jet using laser doppler anemometry method â Experimental research and error analysis [Volume 17, Issue 4, 2017, Pages 92-100]
Chegini, Mohammad Reza Analytical and Numerical Analysis of Chaos in Attitude Dynamics of a Satellite in an Elliptic Orbit [Volume 17, Issue 7, 2017, Pages 236-244]
Chegini, Somayeh Design of quantum intelligent robust controller via time variant break frequency bandwidth sliding surface [Volume 17, Issue 1, 2017, Pages 305-310]
Cheharbidi, Hadi Numerical Modelling of Flood Waves Propagation in Sewer Networks using one- and Two-Dimensional Modified HLLC Method [Volume 17, Issue 7, 2017, Pages 273-282]
Chini, Seyed Farshid Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
Chini, Seyed Farshid Hydrodynamic Design and Numerical Simulation of a Very Low Head Axial Turbine (VLH) [Volume 17, Issue 12, 2018, Pages 373-381]
Chitsaz, Mahzad The effect of external magnetic field on mixing characteristics of two-dimensional isotropic MHD [Volume 17, Issue 12, 2018, Pages 319-327]
D
Dadashzadeh, Behnam Design and fabrication of an autonomous mobile robot equiped with color lasers and its trajectory control based on machine vision [Volume 17, Issue 6, 2017, Pages 213-220]
Dalvand, Mohammad Sadegh Optimization of the Ratio of Induced Flow Velocity to Electrical Power Consumption in the DBD Plasma Actuator Using Artificial Neural Network and Genetic Algorithm [Volume 17, Issue 11, 2018, Pages 323-332]
Damircheli, Mahrad Extraction of optimum design process for satellite solar panel based on reliability and solutions to improve it [Volume 17, Issue 8, 2017, Pages 241-251]
Danesh, Mohammad Nonlinear Model for Autonomous Underwater Vehicle and Identification Based on Least Square Algorithm [Volume 17, Issue 3, 2017, Pages 317-326]
Daneshi, Mohammad Simulation and experimental study of severe plastic deformation of 7075 Al alloy processed by repetitive upsetting-extrusion [Volume 17, Issue 8, 2017, Pages 323-332]
Daneshjou, Kamran Design of PID Control strategy for Forward Flight of Quadrotor in the Ground Effect Condition [Volume 17, Issue 12, 2018, Pages 234-242]
Darbari, Roya Determining the optimum thickness ratio of two-layer metallic sheets using multi-objective genetic algorithm [Volume 17, Issue 5, 2017, Pages 446-452]
Dardel, Morteza Investigation of the mechanical properties of the porous scaffolds used in bone tissue engineering by means of micromechanical modeling [Volume 17, Issue 9, 2017, Pages 397-408]
Dardel, Morteza Dynamic analysis of a shape memory alloy beam [Volume 17, Issue 12, 2018, Pages 223-233]
Dartoomian, Arash Numerical analysis of attack angle effects on 3D supersonic turbulent flow around of blunt body along with opposite jet injection [Volume 17, Issue 3, 2017, Pages 355-366]
Darvizeh, Abolfazl The effective investigation of the general stress state on the forming limit of the anisotropic aluminum sheet by using extended M-K model [Volume 17, Issue 11, 2018, Pages 192-198]
Darvizeh, Abolfazl Effect of Different Environmental Conditions on Impact Properties of FMLs Hybridized with Nanoclay [Volume 17, Issue 12, 2018, Pages 193-203]
Darvizeh, Abolfazl Experimental and numerical investigation into the effect of different pressure curves on the thickness variations in hydroforming process of metal plates [Volume 17, Issue 12, 2018, Pages 337-344]
Darvizeh, Aboulfazl The Influence of Pre- Mechanical Friction Stir Processing on Stress State dependent Ductile Damage of 7075-T6 Aluminum Alloy [Volume 17, Issue 1, 2017, Pages 365-374]
Dashtimanesh, Abbas Numerical simulation of a near-shore rotating wave energy converter [Volume 17, Issue 1, 2017, Pages 75-85]
Dashti Rahmatabadi, Asghar Effects of design and lubrication parameters on the dynamic stability of noncircular lobed journal bearings with power law lubricant fluid [Volume 17, Issue 12, 2018, Pages 243-254]
Davazdah Emami, Mohsen Effect of initial impact velocity on dynamics and shape of formed splats of hollow droplets in thermal plasma spraying [Volume 17, Issue 2, 2017, Pages 295-305]
Davazdah Emami, Mohsen Numerical comparison between the impact of a completely molten and a semi-molten hollow droplet on a surface [Volume 17, Issue 8, 2017, Pages 267-278]
Davodi, Farzin Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment [Volume 17, Issue 2, 2017, Pages 275-283]
Davodi Jamaloei, Akbar Investigation on the effect of bonding time on microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [Volume 17, Issue 6, 2017, Pages 101-107]
Davoodi, Behnam Development a new cutting tool by changing the surface texture for increasing the machining performance [Volume 17, Issue 7, 2017, Pages 441-450]
Davoodi, Mahdi An analytical investigation on shape of a falling viscose drop at low Reynolds number [Volume 17, Issue 2, 2017, Pages 251-262]
Davoodi, Mahdi Study of the effect of elastic properties on non-Newtonian drop motion in inertia regime [Volume 17, Issue 9, 2017, Pages 165-174]
Dehghan, Aliakbar Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
Dehghan, Ali Akbar Comparison of different methods of numerical simulation of flow and sound fields around a square cylinder at various incidence angles [Volume 17, Issue 5, 2017, Pages 147-158]
Dehghan, Ali Akbar Experimental Investigation of aero acoustic noise generation process from a wall mounted square cylinder at incidence [Volume 17, Issue 9, 2017, Pages 327-338]
Dehghan, Asma Numerical investigation of reciprocating flow in a shell and tube heat exchanger used as a cooler in gamma Stirling engine [Volume 17, Issue 10, 2018, Pages 359-366]
Dehghani, Abdolazim Calculation of size-dependent surface energy of metallic nanoplates using molecular dynamics simulations [Volume 17, Issue 11, 2018, Pages 447-452]
Dehghani, Ghasem Determination of blast pressure distribution around cylindrical shape based on numerical simulation of explosion [Volume 17, Issue 2, 2017, Pages 19-28]
Dehghani Tafti, Mohammadreza Kinematic Analysis and Mechatronic Design of a 3-DOF Parallel Robot for Craniotomy Surgery [Volume 17, Issue 11, 2018, Pages 289-299]
Dehghan manshadi, Mojtaba Experimental Investigation of aero acoustic noise generation process from a wall mounted square cylinder at incidence [Volume 17, Issue 9, 2017, Pages 327-338]
Dehghanmanshadi, Mojtaba Numerical simulation of the characteristic chart and the steady state wake flow past a marine propeller using OpenFOAM [Volume 17, Issue 9, 2017, Pages 290-300]
Dehghan Manshadi, Mojtaba Numerical estimation of the wing boundary layer transition in propeller flowfield [Volume 17, Issue 2, 2017, Pages 157-165]
Dehghan Manshadi, Mojtaba New interior design for polymer flow membrane fuel cell flow field to improve performance for use in an aerial vehicle [Volume 17, Issue 12, 2018, Pages 297-308]
Dehghan Manshdi, Mojtaba Numerical Simulation of the Unsteady Wake Flow around a Marine Propeller Using URANS Model [Volume 17, Issue 9, 2017, Pages 175-184]
Dehghan Menshadi, Mojtaba Numerical Analyses of the Vortical Flow over the Cranked Kite Wing in Ground Proximity [Volume 17, Issue 4, 2017, Pages 41-51]
Deilami Azodi, Hamed Experimental and Numerical Study on Effects of Process Parameters on Working Zone in Hydro-mechanical Deep Drawing of Two-layer Conical Parts [Volume 17, Issue 3, 2017, Pages 72-78]
Deilami Azodi, Hamed Determining the optimum thickness ratio of two-layer metallic sheets using multi-objective genetic algorithm [Volume 17, Issue 5, 2017, Pages 446-452]
Delafrouz, Pourya Development of Coarse-Graining Methods for Modeling of Silicon Nanostructures [Volume 17, Issue 4, 2017, Pages 267-276]
Delavari, Hadi Adaptive fractional order Backstepping sliding mode controller design for a magnetic levitation system [Volume 17, Issue 3, 2017, Pages 187-195]
Delavari, Hadi Design and Practical Implementation of a Fractional Order PID Controller for a Single Flexible-Link Robot [Volume 17, Issue 10, 2018, Pages 411-419]
Deyhim, Salar Numerical simulation of magnetic nanoparticle delivery at location of abdominal aortic bifurcation using single wire magnetic source [Volume 17, Issue 9, 2017, Pages 65-74]
Doakhan, Moein Trajectory Tracking of a Quadrotor for Obstacle Avoidance Using Super-Twisting Sliding Mode Controller and Observer. [Volume 17, Issue 8, 2017, Pages 333-342]
Doakhan, Moein Attitude Control of a Quadrotor Using Implementation of Modified PID and Sliding Mode Controllers [Volume 17, Issue 10, 2018, Pages 223-232]
Dolabi, Mustafa Hadi Numerical Investigation of Lateral jet interaction effects on aerodynamic behavior of a supersonic projectile [Volume 17, Issue 4, 2017, Pages 431-442]
Dolati, Farid Numerical analysis of the electric field effect on mass transfer through
a moist object [Volume 17, Issue 1, 2017, Pages 383-393]
Dolati, Shokoofeh A Numerical study of failure modes of a composite plate subjected to hail ice impact [Volume 17, Issue 12, 2018, Pages 77-86]
E
Ebrahimi, Abbas Evaluation of FPGA hardware as a new approach for accelerating the numerical solution of the Laplace problem [Volume 17, Issue 1, 2017, Pages 67-74]
Ebrahimi, Asghar Design of Robust H_â Control for Stabilizing of Stratospheric Airship with Parametric Uncertainty and External Disturbance [Volume 17, Issue 3, 2017, Pages 216-226]
Ebrahimi, Benyamin Multi-Objective Multidisciplinary Design Optimization of a General Aviation Aircraft [Volume 17, Issue 2, 2017, Pages 199-210]
Ebrahimi, Masoud Optimization of the Ratio of Induced Flow Velocity to Electrical Power Consumption in the DBD Plasma Actuator Using Artificial Neural Network and Genetic Algorithm [Volume 17, Issue 11, 2018, Pages 323-332]
Ebrahimi, Mohammad Experimental Study of the Noise Sources from a Hot Supersonic Jet Impinging on a Flat Plate at Initial Stages of Jet Formation [Volume 17, Issue 2, 2017, Pages 359-368]
Ebrahimi, Saeed Dynamic Modeling and Experimental Evaluation of the Power Loss of a Rotating System with the Angular Misalignment and Unbalancing Faults [Volume 17, Issue 4, 2017, Pages 237-246]
Ebrahimi-Nejad Rafsanjani, Salman Vibro-acoustic analysis of tire and rim finite element model coupled with fluid acoustic cavity [Volume 17, Issue 4, 2017, Pages 381-392]
Ebrahimkhani, Mahdi Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach [Volume 17, Issue 12, 2018, Pages 505-513]
Eftekhari, M Effects of PTCAP as a severe plastic deformation method on the mechanical and microstructural properties of AZ31 magnesium alloy [Volume 17, Issue 12, 2018, Pages 409-416]
Eftekhari, Mohammad Study of Microstructure and mechanical properties of pure commercial titanium via combination of Equal channel angular pressing and Extrusion [Volume 17, Issue 1, 2017, Pages 453-461]
Eftekhari, Mohammad Experimental investigation of the effect of temperature in extrusion process of ECAPed nanostructured Titanium [Volume 17, Issue 4, 2017, Pages 52-60]
Eghbali, Beitallah Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process [Volume 17, Issue 7, 2017, Pages 180-184]
Ehghaghi, Mir Boyok Experimental and numerical study of double splitter blades effect on the centrifugal pump performance [Volume 17, Issue 3, 2017, Pages 196-204]
Ehrampoosh, Armin Online proportional myoelectric control of a humanoid shoulder motions using electromyogram signals [Volume 17, Issue 9, 2017, Pages 1-12]
Ehterami, Arian Preparation and characterization of barium titanate scaffold for bone tissue engineering [Volume 17, Issue 12, 2018, Pages 417-422]
Ekrami, Mohammad Experimental study of projectiles with flat, conical and hemispherical nose shapes on low velocity impact on GLARE 3 [Volume 17, Issue 7, 2017, Pages 109-118]
Ekramian, Mohsen Nonlinear Model for Autonomous Underwater Vehicle and Identification Based on Least Square Algorithm [Volume 17, Issue 3, 2017, Pages 317-326]
Ekramian, Mohsen High-Gain Observers for a Class of Nonlinear Systems with Simultaneous and Different Delay at State, Input and Output [Volume 17, Issue 12, 2018, Pages 463-468]
Emamian, Amin An analytical investigation on shape of a falling viscose drop at low Reynolds number [Volume 17, Issue 2, 2017, Pages 251-262]
Emamian, Amin Study of the effect of elastic properties on non-Newtonian drop motion in inertia regime [Volume 17, Issue 9, 2017, Pages 165-174]
Enferadi, Javad Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
Enzevaee, Camelia Elastic behavior of an edge dislocation in a core-shell nanowire embedded to an infinite matrix within surface/interface theory of elasticity [Volume 17, Issue 2, 2017, Pages 439-445]
Ermagan, Hamidreza Effects of convergence of the superhydrophobic walls on the performance of microchannels as heat sinks [Volume 17, Issue 7, 2017, Pages 49-58]
Esalmi Farsani, Reza Influence of pre strain shape memory alloy wire on impact properties of smart fibers metal composite [Volume 17, Issue 4, 2017, Pages 322-330]
Esfahanian, Vahid Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
Esfahanian, Vahid Charge-Discharge Cycle Simulation of Lead-Acid Cell Using Chebyshev Spectral Method [Volume 17, Issue 10, 2018, Pages 213-222]
Esfahanian, Vahid Investigation of ducted wind turbine using potential flow method [Volume 17, Issue 10, 2018, Pages 350-358]
Esfahanian, Vahid Numerical Investigation of non-homogeneity and specific area in porous media on packed bed reactor performance by Lattice Boltzmann Method [Volume 17, Issue 12, 2018, Pages 446-456]
Esfandiari, Arman Numerical simulation of a near-shore rotating wave energy converter [Volume 17, Issue 1, 2017, Pages 75-85]
Eshagh Nimvari, Majid Energy, Exergy and Environmental Analysis of Using Hybrid Compression-Absorption Refrigeration System on a Merchant Ship [Volume 17, Issue 10, 2018, Pages 429-438]
Eskandari, Amir Hossein A finite element analysis for shape memory polymer Timoshenko beams [Volume 17, Issue 8, 2017, Pages 351-359]
Eslami Farsani, Reza An experimental investigation on the tensile behavior of epoxy/carbon fibers composites containing anhydride self-healing material [Volume 17, Issue 3, 2017, Pages 336-342]
Eslami Farsani, Reza Micro-vascular channel based self-healing fibrous composites under transverse loading [Volume 17, Issue 5, 2017, Pages 63-68]
Eslami Farsani, Reza Investigation of the microstructure and mechanical properties of cast AA7068 nanocomposite reinforced with graphene nano plates [Volume 17, Issue 10, 2018, Pages 139-144]
Eslami-Farsani, Reza Experimental investigation of effect of thermal cycling and metal surface treatment on flexural properties laminate composite of aluminium- epoxy/basalt fibers [Volume 17, Issue 8, 2017, Pages 369-376]
Eslsami-Farsani, Reza Influence of pre-strain and position of shape memory alloy wire on buckling properties of smart fibers metal composite [Volume 17, Issue 11, 2018, Pages 429-436]
Esmaeili, arezoo Effect of severe plastic deformation by equal channel angular pressing on fracture toughness of Al-7075 alloy [Volume 17, Issue 12, 2018, Pages 11-20]
Esmaeilzadeh Khadem, Siamak Analysis of linear vibrational behavior of anisogrid lattice composite conical shells formed by helical ribs [Volume 17, Issue 3, 2017, Pages 251-262]
Esmaeilzade Khadem, Siamak Vibration Analysis of a Laminated Deep Curved Beams Subjected to a Moving Load by Considering the Rotary Inertia and Shear Force [Volume 17, Issue 7, 2017, Pages 141-151]
Esmailpoor Hajilak, Zanyar Simulation of crack growth rate in T56 jet engine compressor blade using Raju-newman method [Volume 17, Issue 11, 2018, Pages 21-30]
Esmailpour, Kazem Investigation of Temperature Field and Laminar Flame Structure of Inclined Impinging Jets by Interferometry Mach-Zehnder Experimental Method [Volume 17, Issue 6, 2017, Pages 233-240]
Esmailpour, Mahdi Comparison of the VOF and the Two-Fluid Models for the Numerical Simulation of Aeration and non Aeration Stepped Spillway [Volume 17, Issue 12, 2018, Pages 255-265]
Estaji, Mohsen Molecular dynamic modeling of bioparticles nanomanipulation based on AFM: investigating substrate effects [Volume 17, Issue 3, 2017, Pages 437-445]
Etemadi, Ehsan Analysis of effective parameters of auxetic composite structure made with multilayer orthogonal reinforcement by finite element method [Volume 17, Issue 4, 2017, Pages 247-254]
Etemadi, Hadi A study on the size-dependent behavior of electrostatic microbeams immersed in incompressible fluid [Volume 17, Issue 1, 2017, Pages 185-192]
Etemadi Haghighi, Shahram Preparation and characterization of barium titanate scaffold for bone tissue engineering [Volume 17, Issue 12, 2018, Pages 417-422]
Eynbeygui, Mehdi Finite element simulation of selective laser melting process for fabrication of a sample part under various support conditions [Volume 17, Issue 4, 2017, Pages 143-153]
Ezatpour, Hamid reza Mechanical and microstructure properties of Al/CNT-Al2O3 hybrid nanocomposite produced by accumulative roll bonding process [Volume 17, Issue 12, 2018, Pages 56-64]
F
Fadaei, Payam Ionic size effects on combined electrokinetic and pressure driven flow of Power-law fluids [Volume 17, Issue 11, 2018, Pages 77-88]
Fadaiepour, Abdoollah Design and modeling of artificial arm muscle using shape memory alloys [Volume 17, Issue 10, 2018, Pages 29-38]
Faghih Aliabadi, Mohammad Ali Comparison between polydispersed and monodispersed models on condensing water-vapor flow in a supersonic convergent-divergent nozzle [Volume 17, Issue 3, 2017, Pages 19-30]
Faghih Khorasani, Ahmad Reza Physical modeling of melt flow in steel continuous casting tundish [Volume 17, Issue 6, 2017, Pages 385-392]
Fahimi, Pouya Torsional modeling and experimental characterization of a shape memory alloy rod, using Brinsonâs asymmetric model [Volume 17, Issue 12, 2018, Pages 469-477]
Fajri, Hamid Reza Numerical evaluation of engine performance and emission characteristics of rapeseed oil and its blends in diesel engines [Volume 17, Issue 4, 2017, Pages 277-284]
Fakhri Inchehborun, Araz Mohammad Fault detection of laminated composite plate with delamination damage using neural network training based on the free vibration response [Volume 17, Issue 5, 2017, Pages 221-231]
Fakoor, Mahdi Modeling of large scale relative motion of two satellite in elliptical orbit [Volume 17, Issue 2, 2017, Pages 187-198]
Fakoor, Mahdi A New Approaches for Satellite Constellation Design to Regional Coverage Using GDOP [Volume 17, Issue 5, 2017, Pages 193-200]
Fallah, Saleh Numerical study of aeroelastic instability behavior of Nasa 37 transonic compressor rotor blades [Volume 17, Issue 3, 2017, Pages 123-134]
Fallah, Saleh Numerical study of the effect of angle and distance between hub and shroud at the output passage of impeller in one stage of ESP pump [Volume 17, Issue 6, 2017, Pages 149-156]
Fallah Ghavidel, Hesam Observer-Based Robust Adaptive Fuzzy Approach for Current Control of Robot Manipulators by Estimation of Uncertainties [Volume 17, Issue 6, 2017, Pages 286-294]
Fallahi Arezoudar, Alireza Optimization of friction stir welding parameters of dissimilar AA5052 and AA6061-T6 joint for achieving optimum microstructure and mechanical properties [Volume 17, Issue 7, 2017, Pages 20-30]
Fallah kharmiani, Soroush A new method to reach high-density ratios and low viscosities based on the Shan-Chen multiphase model in lattice Boltzmann method [Volume 17, Issue 9, 2017, Pages 145-152]
Fallahzadeh, Hamed Static and dynamic tolerance analysis of flexible rotary systems based on the tolerance zone method [Volume 17, Issue 8, 2017, Pages 143-152]
Farahani, Mohammadreza Cladding of Carbon Steel with Aluminum Stainless Layer Using Friction Stir Welding Method [Volume 17, Issue 4, 2017, Pages 410-418]
Farahat, Said Evaluation combined cycle irreversible on the criteria of maximum power in finite time thermodynamics [Volume 17, Issue 11, 2018, Pages 333-342]
Farahmand, Farzam Investigating the effect of viscoelastic ankle foot prosthesis on below-knee amputee gait cycle: Modeling and simulation [Volume 17, Issue 1, 2017, Pages 311-321]
Farahmand, HamidReza Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2018, Pages 259-270]
Farahnakian, Masoud Ultrasonic assisted magnetic abrasive finishing of inner surface of tube [Volume 17, Issue 5, 2017, Pages 103-110]
Faraji, Ghader Study of Microstructure and mechanical properties of pure commercial titanium via combination of Equal channel angular pressing and Extrusion [Volume 17, Issue 1, 2017, Pages 453-461]
Faraji, Ghader Experimental investigation of the effect of temperature in extrusion process of ECAPed nanostructured Titanium [Volume 17, Issue 4, 2017, Pages 52-60]
Faraji, Javad Design and implementation of AHRS by using Kautz function and predictive estimator with Eulerâs dynamic [Volume 17, Issue 6, 2017, Pages 221-232]
Farghadani, Mohammad Hossein Multi-Objective Multidisciplinary Design Optimization of a General Aviation Aircraft [Volume 17, Issue 2, 2017, Pages 199-210]
Farhadi, Mehdi Fractional order sliding mode controller design for quadrotor system [Volume 17, Issue 5, 2017, Pages 287-294]
Farhadi, Mousa Experimental Study of Solar Distillation using PCM and Flow Turbulators [Volume 17, Issue 6, 2017, Pages 117-127]
Farhadzadeh, Farhad Experimental and numerical studying of AL5083 alloy fracture using a cruci-form specimen under biaxial loading [Volume 17, Issue 12, 2018, Pages 391-399]
Farhang Sotoodeh, Amir Design and Parametric Study of Three Stream Plate-Fin Heat Exchangers with Rectangular Fins [Volume 17, Issue 8, 2017, Pages 377-387]
Farhani, Foad A framework for developing an FPGA based coprocessor for accelerating numerical computations [Volume 17, Issue 10, 2018, Pages 58-64]
Farmani, Mohammad Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
Farmani, Seyyed Mahmoud Experimental and numerical investigation into the effect of different pressure curves on the thickness variations in hydroforming process of metal plates [Volume 17, Issue 12, 2018, Pages 337-344]
Faroughi, Shirko Analysis of axial vibration of nanorods with two phase integro-differential nonlocal elasticity based on Iso-geometric approach [Volume 17, Issue 5, 2017, Pages 86-94]
Faroughi, Shirko Dynamic analysis of a micro beam based on sub-harmonic parametric excitation [Volume 17, Issue 5, 2017, Pages 374-384]
Farrokh, Mojtaba A Comparison between finite element and separation of variables method in investigating frequency behavior of Bimorph piezoelectric beam [Volume 17, Issue 5, 2017, Pages 31-40]
Farzaneh, Mahsa Effects of Fin Presence and change the Aspect Ratio on Natural Convection in Coaxial Annuli [Volume 17, Issue 3, 2017, Pages 10-18]
Farzaneh Gord, Mahmood Double acting expansion engine simulation performance based on control valve type and gas composition [Volume 17, Issue 2, 2017, Pages 29-40]
Farzi, Hassan A numerical investigation of Nusselt number and friction coefficient in an arc-type Stirling engine heater [Volume 17, Issue 4, 2017, Pages 85-91]
Fata, Ali Effects of PTCAP as a severe plastic deformation method on the mechanical and microstructural properties of AZ31 magnesium alloy [Volume 17, Issue 12, 2018, Pages 409-416]
Fatehi, Mohammad Reza Thermal analysis, effect of lubricant and fatigue life of spiral bevel gears of main gearbox [Volume 17, Issue 8, 2017, Pages 38-48]
Fatehi Sichani, Fariborz Experimental and numerical investigation on interlayer pressure at bimetallic Copper clad Aluminum wire drawing [Volume 17, Issue 1, 2017, Pages 253-262]
Fathali, Mani The effect of external magnetic field on mixing characteristics of two-dimensional isotropic MHD [Volume 17, Issue 12, 2018, Pages 319-327]
Fathalilou, Mohammad A study on the size-dependent behavior of electrostatic microbeams immersed in incompressible fluid [Volume 17, Issue 1, 2017, Pages 185-192]
Fathi, Alireza Dynamic analysis of a shape memory alloy beam [Volume 17, Issue 12, 2018, Pages 223-233]
Fathi, Hossein Pore Scale Modelling of Cathode Catalyst Layer of PEM Fuel Cell to Investigate the Tortuosity and Effective Diffusivity [Volume 17, Issue 2, 2017, Pages 10-18]
Fathian, Ashkan Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
Fatouraee, Nasser Predicting Nonlinear Behavior of Adipose Tissue Extracellular Matrix Based on Structural Model [Volume 17, Issue 7, 2017, Pages 1-8]
Fatouraee, Nasser A finite element viscoelastic model based on consecutive transverse ultrasound images of carotid artery [Volume 17, Issue 7, 2017, Pages 421-430]
Fayaz, Rima The Assessment of Window Blinds effect on Conserving Energy Consumption of Office Building in Tehran [Volume 17, Issue 4, 2017, Pages 17-28]
Fazeli Asl, Sayed Bagher Fractional Order Backstepping Fast Terminal Sliding Mode Control for Micro-Electro-Mechanical triaxial gyroscope [Volume 17, Issue 5, 2017, Pages 385-393]
Fereidoonnezhad, Mohammad Investigation of ducted wind turbine using potential flow method [Volume 17, Issue 10, 2018, Pages 350-358]
Ficuciello, Fanny A novel Lyapunov function for stability of haptic device in simulating virtual objects [Volume 17, Issue 10, 2018, Pages 367-374]
Firouzi, Mojtaba Experimental, numerical and theoretical analysis of energy absorption process by aluminum profile with H-shaped thin-walled cross section [Volume 17, Issue 8, 2017, Pages 213-223]
Foadadini, Ali Effects of air change rate on comfort, air quality and energy consumption in an amphitheater with under-floor air distribution system [Volume 17, Issue 2, 2017, Pages 284-294]
Foroozmehr, Ehsan Study of heat-affected zone (HAZ) caused by cutting of Thin Ti-CP Sheet via CW CO2 Laser [Volume 17, Issue 5, 2017, Pages 253-259]
Foroutan, Kamran Thermal post-buckling analysis of eccentrically stiffened FG cylindrical shells surrounded by elastic foundation and subjected to thermal radial loading [Volume 17, Issue 3, 2017, Pages 397-404]
Forozan, Maryam A Similarity Solution of the MHD Fluid over a Stretching Sheet: A Qualitative Investigation of the Surface with Constant Suction in Cooling Process [Volume 17, Issue 4, 2017, Pages 341-348]
Fotuhi, Alireza Analysis of composite beam, having initial geometric imperfection, subjected to off-center impact [Volume 17, Issue 5, 2017, Pages 185-192]
Fouladi, Nematollah Numerical investigation of back flow arrester effect on altitude test simulator starting performance [Volume 17, Issue 7, 2017, Pages 185-196]
Fouladi, Sajad Friction stir vibration welding and study about the effects of its parameters on microstructure and mechanical properties of Al5052 joint [Volume 17, Issue 4, 2017, Pages 217-224]
G
Gandjalikhan Nassab, Seyed Abdolreza Three-dimensional analysis of a porous radiant burner under different operating conditions with combustion modeling [Volume 17, Issue 12, 2018, Pages 105-113]
Ganjalikhan Nasab, Seyed Abdolreza Combined radiative-convective inverse design problem in a 2-D channel filled with radiating gases [Volume 17, Issue 4, 2017, Pages 117-124]
Ganji, Behnam The effects of laser pulse energy and focal point position on laser surface hardening of AISI 410 stainless steel [Volume 17, Issue 6, 2017, Pages 311-318]
Ganjiani, Mahdi Numerical study of delamination in drilling of Glass/Polyester and investigation of mode ÎÎ fracture contribution [Volume 17, Issue 8, 2017, Pages 173-181]
Ganjiani, Mehdi Numerical study of delamination in drilling of Glass/Polyester and investigation of mode ÎÎ fracture contribution [Volume 17, Issue 8, 2017, Pages 173-181]
Garousi Farshi, Leili Thermodynamic analysis of a new hybrid-ejector heat pump and comparison with the hybrid heat pump [Volume 17, Issue 8, 2017, Pages 423-432]
Geran Gharakheyli, Maryam Investigation of the effective parameters in the bulging process and obtaining Forming limit curve of the stainless steel tube by the GTN criterion [Volume 17, Issue 6, 2017, Pages 365-376]
Ghadami, Mehrdad Numerical investigation of the damaged area of GLARE® under oblique impact of the AP projectile with medium caliber [Volume 17, Issue 3, 2017, Pages 367-375]
Ghadimi, Behnam Numerical Investigation of Fluid Flow and Hemolysis in Axial and Centrifugal Pump as Left Ventricular Assist Device (LVAD) [Volume 17, Issue 3, 2017, Pages 135-142]
Ghadiri, Behzad Numerical study of aeroelastic instability behavior of Nasa 37 transonic compressor rotor blades [Volume 17, Issue 3, 2017, Pages 123-134]
Ghadiri, Behzad Numerical study of the effect of angle and distance between hub and shroud at the output passage of impeller in one stage of ESP pump [Volume 17, Issue 6, 2017, Pages 149-156]
Ghadiri, Hamid Control of Nao Robot Walking On the Basis of Model-Based Predictive Controller [Volume 17, Issue 1, 2017, Pages 229-240]
Ghadiri, Hamid Design Type-2 Fuzzy Systems for Identification and Fault Detection of Nonlinear systems For Three-tank system, Electro-hydraulic System [Volume 17, Issue 1, 2017, Pages 342-352]
Ghadiri, Majid Elastoplastic buckling analysis of rectangular plates over the Pasternak foundation based on incremental and proportional theories [Volume 17, Issue 3, 2017, Pages 205-215]
Ghaedi, MehrOrang Experimental study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 17, Issue 11, 2018, Pages 118-124]
Ghafari, Mohammad hadi Combination of independent component analysis and support vector machines for intelligent faults diagnosis of rotating machinery [Volume 17, Issue 6, 2017, Pages 257-264]
Ghafari, Mohammad Mahdi Strength recovery in friction stir welding of AA6061-AA2024 during various post weld heat treatments [Volume 17, Issue 12, 2018, Pages 542-550]
Ghaffari, Mohammad Continuous adjoint-based shape optimization for low reynolds number oscillating airfoils in turbulent flow on unstructured grids [Volume 17, Issue 7, 2017, Pages 161-170]
Ghajar, Arsalan Experimental investigation of ground effects on aerodynamics characteristics of a delta wing airplane model [Volume 17, Issue 9, 2017, Pages 281-289]
Ghalami Choobar, Mehran Static analysis of transversely anisotropic laminates using improved zig-zag theory subjected to sinusoidal load [Volume 17, Issue 4, 2017, Pages 393-398]
Ghalami-Choobar, Mehran Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2018, Pages 42-46]
Ghanadi, Ahmad Experimental and numerical investigation of the free vibration of composite sandwich plates with lattice cores [Volume 17, Issue 10, 2018, Pages 1-8]
Ghanbari, Ahmad Design and modeling of artificial arm muscle using shape memory alloys [Volume 17, Issue 10, 2018, Pages 29-38]
Ghanbari, Hamid Reza Experimental analysis of spot welded parameters on tensile behavior of ferrite-martensite dual phase steel with Taguchi statistical method [Volume 17, Issue 6, 2017, Pages 342-350]
Ghanbari, Masoud Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
Ghanbarzadeh, Afshin Combination of independent component analysis and support vector machines for intelligent faults diagnosis of rotating machinery [Volume 17, Issue 6, 2017, Pages 257-264]
Gharaei, Eshagh Numerical simulation of unsteady free stream velocity on an oscillating
horizontal axis wind turbine blade element [Volume 17, Issue 3, 2017, Pages 1-9]
Gharali, Kobra Numerical simulation of unsteady free stream velocity on an oscillating
horizontal axis wind turbine blade element [Volume 17, Issue 3, 2017, Pages 1-9]
Gharehkhani, Abdolreza Study of Static Deflection and Instability Voltage of Phase Shifter Micro-Switches Using a Nonlinear Beam Model and Non-localized elasticity theory [Volume 17, Issue 10, 2018, Pages 93-100]
Gharib, Sharif Investigation the effect of humidification inlet gases on the dynamic response of a PEM fuel cell stack [Volume 17, Issue 8, 2017, Pages 433-443]
Gharini, Mohammad Investigating the effect of viscoelastic ankle foot prosthesis on below-knee amputee gait cycle: Modeling and simulation [Volume 17, Issue 1, 2017, Pages 311-321]
Ghasabi, Seyed Ali Nonlinear vibrations and stability analysis of a micro rotating shaft by considering the modified couple stress theory and micro inertia effect [Volume 17, Issue 4, 2017, Pages 134-142]
Ghasemi, Ahmad Reza Application of CVN and 3-point bending in determination of critical fracture toughness of 46E2 and 60E1 rails [Volume 17, Issue 4, 2017, Pages 61-66]
Ghasemi, Majid Effect of Micro-Channel Wall Thickness and Diameter on Inlet Gas Temperature and Velocity under the Influence of Thermal Creeping [Volume 17, Issue 4, 2017, Pages 154-160]
Ghasemiasl, Ramin Experimental Study of Flow Control Over an Ahmed Body Using Plasma Actuator [Volume 17, Issue 12, 2018, Pages 523-530]
Ghasemi Bousejin, Mohammad Reza Numerical simulation of wind turbine in Manjil wind farm considering wind regime study [Volume 17, Issue 9, 2017, Pages 75-85]
Ghasemi-Ghalebahman, Ahmad A novel numerical method for fatigue life prediction under non-proportional loadings [Volume 17, Issue 5, 2017, Pages 232-242]
Ghasemi Shiri, Morteza Buckling Analysis of intelligent Nanoplate under Inplane Loading Based on Nonlocal Elasticity and Shear and normal Deformation Theories [Volume 17, Issue 2, 2017, Pages 427-438]
Ghasemkhani, Amir Evaluation combined cycle irreversible on the criteria of maximum power in finite time thermodynamics [Volume 17, Issue 11, 2018, Pages 333-342]
Ghassemi, Hassan A BEM/RANS Coupled Method for Numerical Simulations of Podded Drive System [Volume 17, Issue 2, 2017, Pages 65-76]
Ghassemi, Hojat Study of the Influences of Unsteadiness on the Multicomponent Fuel Droplets [Volume 17, Issue 1, 2017, Pages 293-304]
Ghassemi, Majid Performance analysis of coplanar single chamber solid oxide fuel cell with oxygen-methane-nitrogen mixture under steady state conditions [Volume 17, Issue 1, 2017, Pages 31-38]
Ghatreh, Kobra Analysis of composite beam, having initial geometric imperfection, subjected to off-center impact [Volume 17, Issue 5, 2017, Pages 185-192]
Ghayoomi Mohammadi, Mohammad AE- based damage investigation in composite laminates under low-velocity impact tests [Volume 17, Issue 7, 2017, Pages 91-100]
Ghayour, Mostafa Behaviour analysis of a bistable twisting hybrid composite plate with an external metal layer and effecting factors on stability region [Volume 17, Issue 2, 2017, Pages 420-426]
Gheisarieh, Nastran Topology, shape and size optimization of 3 D tensegrity structures with specified number of members under external loads [Volume 17, Issue 4, 2017, Pages 255-266]
Gheysari, Majid Buckling of FGM thick-walled cylindrical shell supported with third order shear theory under uniform Axial and lateral loads [Volume 17, Issue 7, 2017, Pages 373-385]
Ghiasi, Mahmoud Hydrodynamics of restrained buoy with an approach to wave energy absorption enhancement [Volume 17, Issue 5, 2017, Pages 129-137]
Ghodsi, Mohammad Hadi Dynamic Modeling and Experimental Evaluation of the Power Loss of a Rotating System with the Angular Misalignment and Unbalancing Faults [Volume 17, Issue 4, 2017, Pages 237-246]
Gholamian, Mohammad Thermo-mechanical behavior of polymer composites exposed to fire [Volume 17, Issue 9, 2017, Pages 86-96]
Gholampour, Seifollah Experimental evaluating and statistical modeling of temperature elevation in bone drilling with internal cooling with gas [Volume 17, Issue 3, 2017, Pages 47-54]
Gholamzadeh, Morteza Experimental analysis of thermal performance of the modified vacuum tube solar collector [Volume 17, Issue 3, 2017, Pages 55-62]
Gholipoor, Ahad Experimental investigation of the influence of tools ultrasonic vibrations and external magnetic field on machining characteristics at EDM process [Volume 17, Issue 12, 2018, Pages 495-504]
Gholizade, Ali The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
Gholparvar, Hosein Nonlinear Model Updating of Composite-Metal Single Lab Bolted Joint Using High Order Response Amplitude Approximation [Volume 17, Issue 11, 2018, Pages 39-46]
Ghorbani, Mohadese A New Approaches for Satellite Constellation Design to Regional Coverage Using GDOP [Volume 17, Issue 5, 2017, Pages 193-200]
Ghorbani, Vahid Observer-Based Robust Adaptive Fuzzy Approach for Current Control of Robot Manipulators by Estimation of Uncertainties [Volume 17, Issue 6, 2017, Pages 286-294]
Ghorbanian, Kaveh Experimental Study of the Noise Sources from a Hot Supersonic Jet Impinging on a Flat Plate at Initial Stages of Jet Formation [Volume 17, Issue 2, 2017, Pages 359-368]
Ghorbanpour, Leila Investigating the nonlinear behavior and stability analysis of the automatic ball balancer by the multiple scales method [Volume 17, Issue 4, 2017, Pages 188-198]
Ghorbanpour Arani, Ali Thermal analysis, effect of lubricant and fatigue life of spiral bevel gears of main gearbox [Volume 17, Issue 8, 2017, Pages 38-48]
Ghoshchi, Hassan Numerical simulation of hydro-dynamics of a high-speed planning hull with two degrees of freedom [Volume 17, Issue 2, 2017, Pages 231-239]
Givi, Mohammad Friction stir vibration welding and study about the effects of its parameters on microstructure and mechanical properties of Al5052 joint [Volume 17, Issue 4, 2017, Pages 217-224]
Gohari Rad, Sina The Influence of Pre- Mechanical Friction Stir Processing on Stress State dependent Ductile Damage of 7075-T6 Aluminum Alloy [Volume 17, Issue 1, 2017, Pages 365-374]
Golbaf, Ali Experimental Investigation and Numerical Simulation of Fluid-Structure Interaction on Hydroforming Process of Triangular Plates Under Impact Loading [Volume 17, Issue 12, 2018, Pages 114-122]
Goldaran, Reza Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of prestressed pipe monitoring using Acoustic Emission technique [Volume 17, Issue 2, 2017, Pages 306-314]
Golmohammadi, Amir Hossein Build Time Estimation in Additive Manufacturing Processes based on Part Orientations [Volume 17, Issue 8, 2017, Pages 9-16]
Golparvar, Seyyed Behzad Effect of inter-particle mass transfer resistance on the performance parameters of an adsorption chiller with finned flat-tube heat exchanger [Volume 17, Issue 3, 2017, Pages 414-424]
Golzar, Mohammad Effect of pull-winding process in thermoplastic composite rod on the impregnation of glass fiber [Volume 17, Issue 3, 2017, Pages 405-413]
Golzar, Mohammad The investigation of the effects of Dimensionâs and Moldâs Temperature on Bistability of PVC/Glass Fiber composites [Volume 17, Issue 4, 2017, Pages 161-167]
Golzar, Mohammad Analytical investigation of the effect of fibrous tow position and radius on impregnation, pulling force and pressure profile in pultrusion process of thermoplastics [Volume 17, Issue 6, 2017, Pages 128-138]
Golzari, Masoud Sound transmission loss through triple-walled sandwich cylindrical shells in the presence of external flow [Volume 17, Issue 10, 2018, Pages 439-450]
Gorji, Hamid Investigation of the effective parameters in the bulging process and obtaining Forming limit curve of the stainless steel tube by the GTN criterion [Volume 17, Issue 6, 2017, Pages 365-376]
Gorji, Hamid Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method [Volume 17, Issue 11, 2018, Pages 311-322]
Gorji valokola, Abdolhamid Investigation of Wrinkling in Hydrodynamic Deep Drawing assisted by Radial Pressure with Inward Flowing Liquid Based on a Geometric Method [Volume 17, Issue 5, 2017, Pages 276-286]
Goudarzi, Koorosh Experimental study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 17, Issue 11, 2018, Pages 118-124]
Goushegir, Seyed Mohammad Hossein Analysis of axial vibration of nanorods with two phase integro-differential nonlocal elasticity based on Iso-geometric approach [Volume 17, Issue 5, 2017, Pages 86-94]
H
Habibnejad Korayem, Asghar An investigation on GO-cement nanocomposites performance under the temperature and pressure of oil wells using molecular dynamics method [Volume 17, Issue 11, 2018, Pages 419-428]
Habibnejad Korayem, Moharam Molecular dynamic modeling of bioparticles nanomanipulation based on AFM: investigating substrate effects [Volume 17, Issue 3, 2017, Pages 437-445]
Hadad, MohamadJafar Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic assisted grinding [Volume 17, Issue 5, 2017, Pages 305-315]
Haddad Zadeh, Mohammad The effect of minimum quantity lubrication on surface roughness in hard turning of 100Cr6 bearing steel with Nano-CBN tool [Volume 17, Issue 3, 2017, Pages 263-269]
Hadi, Alireza Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
Hadi, Alireza Design and Prototyping of a Haptic User Interface based on Head Movements for Patients with Cervical Spinal Cord Injury [Volume 17, Issue 5, 2017, Pages 52-62]
Haghani, Masoome The Assessment of Window Blinds effect on Conserving Energy Consumption of Office Building in Tehran [Volume 17, Issue 4, 2017, Pages 17-28]
Haghbeigi, Morteza Cooperation Algorithm of Autonomous UAVs for Tracking a Dynamic Target in an Adversarial Environment [Volume 17, Issue 5, 2017, Pages 1-11]
Haghbeigi, Morteza Schedule Design and Fleet Assignment Based on Modified Intelligent Algorithms [Volume 17, Issue 6, 2017, Pages 59-66]
Haghbin, Amin Improving shear strength in nanocomposites through electrophoretic deposition of carbon nanotubes [Volume 17, Issue 1, 2017, Pages 462-472]
Haghighat, Heshmatollah Prediction of central bursting defects in the plane strain extrusion process using upper bound method [Volume 17, Issue 11, 2018, Pages 361-370]
Haghighi, Ahmad Reza Numerical simulation of micropolar fluid flow through an asymmetric tapered stenosis artery [Volume 17, Issue 12, 2018, Pages 33-41]
Haghighi Hassanali Deh, Hossein Experimental evaluating and statistical modeling of temperature elevation in bone drilling with internal cooling with gas [Volume 17, Issue 3, 2017, Pages 47-54]
Hajialibabaie, Mahsa Performance enhancement of tube-in-tube heat exchanger utilized in mechanical vapor compression system along with its semi-empirical Nusselt number [Volume 17, Issue 7, 2017, Pages 257-264]
Hajidavalloo, Ebrahim Modeling and simulation of cuttings transfer during well drilling with foam [Volume 17, Issue 10, 2018, Pages 281-291]
Hajipour, Maryam Experimental and numerical study of double splitter blades effect on the centrifugal pump performance [Volume 17, Issue 3, 2017, Pages 196-204]
Hajisadeghian, Ehsan Stress and strain distribution pattern investigation in multi-layer elastic hand prosthesis, inspired by the human skin structure [Volume 17, Issue 5, 2017, Pages 346-352]
Haj Mohammadi Hossein Abadi, Mahdi Practical implementation of a PID - Model Reference Adaptive Controller (MRAC) for a 2-DOF Camera Gimbal [Volume 17, Issue 7, 2017, Pages 325-332]
Hakimi Rad, Danial Proposing of practical relation to estimate amount indoor air pollutants [Volume 17, Issue 2, 2017, Pages 446-450]
Hamed, Mohammad Ali Dynamic Behavior of a Turbojet Engine in Response to Fuel Flow Rate [Volume 17, Issue 1, 2017, Pages 23-30]
Hamedi, Mohammad Hossein Calculation of effective diffusion coefficient of tracer in tumor tissue with microvasculature using inverse method [Volume 17, Issue 10, 2018, Pages 405-410]
Hasanniah, Abbas Microstructure and mechanical properties of aluminum to aluminum clad steel lap joint using gas tungsten arc welding process [Volume 17, Issue 12, 2018, Pages 328-336]
Hasanzadeh, Mahdi Micromechanical analysis of the effects of adding silica nanoparticles on the elastoplastic behavior of polymeric nanocomposites considering interphase [Volume 17, Issue 9, 2017, Pages 319-326]
Hasanzadeh, Reza PR Crack Depth Profiling in Metallic Structures through ACFM Data using Type-II Fuzzy Logic System [Volume 17, Issue 8, 2017, Pages 153-163]
Hasanzadeh Ghasemi, Reza Equipping of a Hovering Type Autonomous Underwater Vehicle with Ballast Tanks and its effect on Degrees of Freedom [Volume 17, Issue 7, 2017, Pages 397-404]
Hasanzadeh Ghasemi, Reza Nano-mechanical Study of a Bio Nano Actuator Under External Forces [Volume 17, Issue 12, 2018, Pages 457-462]
Hashemi, Ramin Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
Hashemi, Ramin Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test [Volume 17, Issue 3, 2017, Pages 451-454]
Hashemi, Ramin Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
Hashemi, Ramin Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process [Volume 17, Issue 7, 2017, Pages 180-184]
Hashemi, Ramin Survey the effect of forming speed on fld for Al 6061 sheets [Volume 17, Issue 10, 2018, Pages 333-340]
Hashemi, Sayyed Study of macroscopic fracture surface characteristics of spiral welded API X65 gas transportation pipeline steel [Volume 17, Issue 11, 2018, Pages 219-228]
Hashemian, Mohamad Occurrence of parametric resonance in vibrations of rectangular plates resting on elastic foundation under passage of continuous series of moving masses [Volume 17, Issue 9, 2017, Pages 225-236]
Hasrati, Emad Nonlinear vibration analysis of conical shells using a numerical strategy [Volume 17, Issue 1, 2017, Pages 210-220]
Hassani, Azadeh Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
Hassani, Behrooz Static and free vibration isogeometric analysis of laminated composite plates integrated with piezoelectric using ReissnerâMindlin theory [Volume 17, Issue 11, 2018, Pages 181-191]
Hassanzadeh, Hamid Numerical simulation of inlet vortex near the inlet air duct of an aircraft engine in headwind condition [Volume 17, Issue 6, 2017, Pages 90-100]
Hassanzadeh, Hassan Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment [Volume 17, Issue 2, 2017, Pages 275-283]
Hassanzadeh, Hassan Cooling performance evaluation of overhead mixing and floor displacement ventilation systems inside a bus by using 65-nodes thermal comfort model [Volume 17, Issue 2, 2017, Pages 333-342]
Hassanzadeh, Hassan Structural study of agglomerate model of the cathode catalyst layer and comparison with the homogeneous model in the PEM fuel cell [Volume 17, Issue 5, 2017, Pages 243-252]
Hassanzadeh, Hassan Investigation of inertial force effects on the heat transfer of viscoelastic fluid flow inside expanded planar channel with the symmetric abrupt expansion [Volume 17, Issue 6, 2017, Pages 139-148]
Hassanzadeh, Hassan Investigation the effect of humidification inlet gases on the dynamic response of a PEM fuel cell stack [Volume 17, Issue 8, 2017, Pages 433-443]
Hassanzadeh, Mojtaba Energy management in order to reduce fuel consumption for parallel Plug-in Hybrid Electric vehicles based on fuzzy predictive control [Volume 17, Issue 5, 2017, Pages 353-362]
Hassanzadeh-Aghdam, mohammad kazem Micromechanical analysis of the effects of adding silica nanoparticles on the elastoplastic behavior of polymeric nanocomposites considering interphase [Volume 17, Issue 9, 2017, Pages 319-326]
Hassanzadeh-Aghdam, Mohammad Kazem Micromechanical modeling of effective elastic properties of hybrid nanocomposites reinforced by fuzzy fiber containing carbon nanotubes [Volume 17, Issue 9, 2017, Pages 261-272]
Heidarinejad, Ghasem Numerical study of aeroelastic instability behavior of Nasa 37 transonic compressor rotor blades [Volume 17, Issue 3, 2017, Pages 123-134]
Heidarinejad, Ghasem Investigation of the Tracheobronchial Cartilages Effect on the Respiration by hybrid RANS-LES Approach [Volume 17, Issue 6, 2017, Pages 201-2012]
Heidarinejad, Ghassem Numerical simulatoin of poolfire suppression using water mist system
investigating nozzle parameter effects [Volume 17, Issue 2, 2017, Pages 350-358]
Heidarinejad, Ghassem Investigation of the effect of mid-tunnel shaft geometry on dispersion of the pollutant in environment [Volume 17, Issue 6, 2017, Pages 13-22]
Heidarinejad, Ghassem The effect of wall force field on temperature distribution in nanochannel contains Lennard-Jones fluid by molecular dynamic simulation [Volume 17, Issue 6, 2017, Pages 23-31]
Heidarinejad, Ghassem The wall spring constant variation effect on distribution of Lennard-Jones fluid in nanochannel by molecular dynamic simulation [Volume 17, Issue 9, 2017, Pages 185-194]
Heidari Somee, Sina A Comparison between finite element and separation of variables method in investigating frequency behavior of Bimorph piezoelectric beam [Volume 17, Issue 5, 2017, Pages 31-40]
Heidary, Hossein The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
Heidary, Seyed Hamidreza Simulation and impedance control of the grasping of a spherical object with soft contact surfaces [Volume 17, Issue 7, 2017, Pages 9-19]
Hematiyan, Mohammad Rahim Experimental, numerical and theoretical analysis of energy absorption process by aluminum profile with H-shaped thin-walled cross section [Volume 17, Issue 8, 2017, Pages 213-223]
Hematiyan, Mohammad Rahim Optimization of the cross-section of hollow bars under torsion using the method of fundamental solutions [Volume 17, Issue 11, 2018, Pages 269-276]
Heydari, Abbas A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation [Volume 17, Issue 1, 2017, Pages 47-55]
Heydari, Behbood The effect of workpiece hardness and cutting parameters on surface roughness in dry hard turning of X210Cr12 cold tool steel [Volume 17, Issue 6, 2017, Pages 241-247]
Heydari, Hamed Providing an analytical model and experimental study of the behavior of cortical bone drilling the thrust force [Volume 17, Issue 5, 2017, Pages 175-184]
Heydari, Mohsen Investigation on the effect of period of temperature variation in intermittent drying of clay [Volume 17, Issue 8, 2017, Pages 17-28]
Heydari, Mohsen Model-Free Adaptive Controller Design for Nonlinear system of an Air Vehicle pitch channel [Volume 17, Issue 11, 2018, Pages 161-171]
Heydarinejad, Hamid Adaptive fractional order Backstepping sliding mode controller design for a magnetic levitation system [Volume 17, Issue 3, 2017, Pages 187-195]
Heydary, Mohammad Mahdi Design of Spike Nozzle and Comparison of Turbulence Models in Numerical Simulation of its Flow-field in Design and Off-design Conditions [Volume 17, Issue 6, 2017, Pages 190-200]
Heydarzadeh, Mohammad Sadegh Real-time estimation of micro-milling cutting tool deflections by using signals of stages driven by linear motors [Volume 17, Issue 6, 2017, Pages 357-364]
Hojaji Najafabadi, Mohammad Numerical analysis of attack angle effects on 3D supersonic turbulent flow around of blunt body along with opposite jet injection [Volume 17, Issue 3, 2017, Pages 355-366]
Hojjat, Yousef Development of a new Method for Experimental Dielectrophoresis Force Measurement in the Microfluidic Cell Sorting Actuators [Volume 17, Issue 3, 2017, Pages 150-158]
Homayooni, Ahmad Molecular dynamic modeling of bioparticles nanomanipulation based on AFM: investigating substrate effects [Volume 17, Issue 3, 2017, Pages 437-445]
Homayoun Sadeghi, Morteza Stability and bifurcation analysis of a beam-mass-spring-damper system under primary and one-to-three internal resonances [Volume 17, Issue 2, 2017, Pages 166-176]
Honarpishe, Mohammad Uncertainty analysis of contour method in the hot extruded Aluminum specimens [Volume 17, Issue 5, 2017, Pages 439-445]
Honarpisheh, Mohammad Application of CVN and 3-point bending in determination of critical fracture toughness of 46E2 and 60E1 rails [Volume 17, Issue 4, 2017, Pages 61-66]
Hoseiniparast, Mahdi Numerical study of the effect of angle and distance between hub and shroud at the output passage of impeller in one stage of ESP pump [Volume 17, Issue 6, 2017, Pages 149-156]
Hosseinalipour, Seyed Mostafa Coupling of internal flow analysis of an injector with maximum entropy model to predict droplet diameter distribution [Volume 17, Issue 3, 2017, Pages 31-36]
Hosseinalipour, Seyed Mostafa Comparison of Various Arrangement Effects of V-Shape Rib Technologies on Turbulence and Heat Transfer Enhancement in Gas Turbine Blade Internal Cooling [Volume 17, Issue 5, 2017, Pages 316-326]
Hosseini, Akbar Optimization of friction stir welding parameters of dissimilar AA5052 and AA6061-T6 joint for achieving optimum microstructure and mechanical properties [Volume 17, Issue 7, 2017, Pages 20-30]
Hosseini, Ehsan An investigation on GO-cement nanocomposites performance under the temperature and pressure of oil wells using molecular dynamics method [Volume 17, Issue 11, 2018, Pages 419-428]
Hosseini, Mir Emad Theoretical Investigation of Internal Cavitation on the FLD of IF Steel Using M-K Model and Gurson Plastic Potential Function [Volume 17, Issue 11, 2018, Pages 353-360]
Hosseini, Mohammad Vibration analysis of a cantilever beam with piezoelectric layers under aeroelastic force and base excitation [Volume 17, Issue 1, 2017, Pages 221-228]
Hosseini, Seyed Meysam A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2018, Pages 312-320]
Hosseini, Seyed Mohammad 3D Simulation of Performance and Pollution of Hydrogen-Diesel Combustion in Heavy Duty Engine [Volume 17, Issue 3, 2017, Pages 177-186]
Hosseini, Seyed Sharafodin Experimental Study of Solar Distillation using PCM and Flow Turbulators [Volume 17, Issue 6, 2017, Pages 117-127]
Hosseinipour, Mehdi Two-Objective Optimization of Aerodynamic Shapes Using Gravitational Search Algorithm [Volume 17, Issue 5, 2017, Pages 211-220]
Hosseinipour, Seyed Jamal A study on the microstructure and mechanical properties of dissimilar joints of copper-nickel alloy and austenitic stainless steel welded by GTAW process [Volume 17, Issue 8, 2017, Pages 49-58]
Hosseinipour, Seyed Jamal Theoretical Investigation of Internal Cavitation on the FLD of IF Steel Using M-K Model and Gurson Plastic Potential Function [Volume 17, Issue 11, 2018, Pages 353-360]
Hosseini Sani, Sayyed Kamal Trajectory design of harmonic loading machine input by central pattern generator [Volume 17, Issue 12, 2018, Pages 423-434]
Hosseini Sani, Seyed Kamal The Novel Control Method for Voice Coil Actuator Fatigue Testing Machine [Volume 17, Issue 7, 2017, Pages 79-90]
Hosseini Sarvari, Seyed Masoud Radiative Calculations for Non-Gray Media with Heat Sourcesby using the Spectral Line-Based Weighted Sum of Gray Gases Model [Volume 17, Issue 1, 2017, Pages 106-116]
Hosseini Toudeshky, Hossein Investigation of failure mechanisms of notched aluminum plates repaired with composite patches using acoustic emission method [Volume 17, Issue 8, 2017, Pages 406-412]
Hosseinzadeh, Ehsan Evaluation of embedded adjacent cylinders in elastic matrix using short-pulse MIIR technique [Volume 17, Issue 11, 2018, Pages 239-246]
Hosseinzadeh, Mohammad Parametric Analysis of a Nanofluid Based Photovoltaic Thermal System, Using Computational Fluid Dynamic [Volume 17, Issue 9, 2017, Pages 195-204]
Hosseinzadeh, Mohammad Numerical and Experimental Investigation of Optimization of Photovoltaic Thermal System, Using Taguchi Method [Volume 17, Issue 8, 2017, Pages 75-86]
Hosseinzadeh, Mohammad Experimental Investigation of Using Water and Ethylene Glycol as Coolants in a Photovoltaic Thermal System [Volume 17, Issue 11, 2018, Pages 12-20]
Huang, Guoping Effect of thick boundary layer ingestion on the performance of hypersonic inlet [Volume 17, Issue 10, 2018, Pages 73-80]
I
Imani, Gholamreza Combination of ghost fluid-lattice Boltzmann and refilling methods for simulation of the moving curved boundaries with heat transfer [Volume 17, Issue 2, 2017, Pages 263-274]
Imani, Hadi Study of microhardness variations in hole making processes on 4340 steel [Volume 17, Issue 1, 2017, Pages 423-430]
Imani, Sayed Misagh Investigation of the mechanical properties of the porous scaffolds used in bone tissue engineering by means of micromechanical modeling [Volume 17, Issue 9, 2017, Pages 397-408]
Irani, Saied A Comparison between finite element and separation of variables method in investigating frequency behavior of Bimorph piezoelectric beam [Volume 17, Issue 5, 2017, Pages 31-40]
Iranmanesh, Faezeh Finite element modeling of avascular tumor growth focusing on the constitutive model [Volume 17, Issue 3, 2017, Pages 115-122]
Isvandzibaei, Mohammad Reza Buckling of FGM thick-walled cylindrical shell supported with third order shear theory under uniform Axial and lateral loads [Volume 17, Issue 7, 2017, Pages 373-385]
J
Jaamialahmadi, Abdolrahman Buckling Analysis of intelligent Nanoplate under Inplane Loading Based on Nonlocal Elasticity and Shear and normal Deformation Theories [Volume 17, Issue 2, 2017, Pages 427-438]
Jaamialahmadi, Abdolrahman An experimental investigation into warm deep drawing process on PVC/fiberglass composite laminates [Volume 17, Issue 10, 2018, Pages 129-138]
Jabbari, Majid The Effect of Strain Nodes on the Energy Harvesting of the Cantilever Piezoelectric Beam with the Vibration Mode Excitation [Volume 17, Issue 10, 2018, Pages 65-72]
Jabbaripour, Behzad Experimental Investigation of Metal Removal Efficiency and Machined Surface Texture in EDM of Titanium Aluminide Compound [Volume 17, Issue 12, 2018, Pages 47-55]
Jafari, Abed Laser brazing of 321 and 410 stainless steels using BNi-2 nickel-based filler metal [Volume 17, Issue 1, 2017, Pages 129-135]
Jafari, Abed Investigation on the effect of bonding time on microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [Volume 17, Issue 6, 2017, Pages 101-107]
Jafari, Ali Asghar Sound transmission loss through triple-walled sandwich cylindrical shells in the presence of external flow [Volume 17, Issue 10, 2018, Pages 439-450]
Jafari, Hassan A study on the microstructure and mechanical properties of dissimilar joints of copper-nickel alloy and austenitic stainless steel welded by GTAW process [Volume 17, Issue 8, 2017, Pages 49-58]
Jafari, Mohammad Optimization of finite metallic plates with quadrilateral cutout subjected to in- plane loading by Ant Lion Optimizer [Volume 17, Issue 1, 2017, Pages 11-22]
Jafari, Mohammad Mehdi Effects of various parameters on dynamic stall behavior and aerodynamic coefficients of a NACA0012 airfoil [Volume 17, Issue 4, 2017, Pages 359-368]
Jafari, Mohammad Saeid Sound transmission loss through triple-walled sandwich cylindrical shells in the presence of external flow [Volume 17, Issue 10, 2018, Pages 439-450]
Jafari, Seyed Mohammad Investigation of displacement amplitude effect on failure mechanisms in open-hole laminated composites under low-cycle fatigue loading using acoustic emission [Volume 17, Issue 12, 2018, Pages 435-445]
Jafarian, Hamoon Three-dimensional modeling of a dew-point evaporative cooler using a modified boundary condition and considering effects of channelsâ entrance regions [Volume 17, Issue 7, 2017, Pages 68-78]
Jafari-Talookolaei, Ramazan-Ali Vibration analysis of a microplate in contact with a fluid based on the modified couple stress theory [Volume 17, Issue 2, 2017, Pages 47-57]
Jahanbakhshi, Akram Effects of Fin Presence and change the Aspect Ratio on Natural Convection in Coaxial Annuli [Volume 17, Issue 3, 2017, Pages 10-18]
Jahanbakhshi, Akram Numerical study of non-Newtonian fluid convection by power law model in a square enclosure with central heating source [Volume 17, Issue 11, 2018, Pages 343-352]
Jahanian, Omid Numerical simulation of inlet vortex near the inlet air duct of an aircraft engine in headwind condition [Volume 17, Issue 6, 2017, Pages 90-100]
Jahanshahi, Hadi Optimization of Planar Low-Thrust Orbit Transfer Maneuver via Fuzzy Optimal Control Approach [Volume 17, Issue 1, 2017, Pages 1-10]
Jahanshahi Javaran, Ebrahim Three-dimensional analysis of a porous radiant burner under different operating conditions with combustion modeling [Volume 17, Issue 12, 2018, Pages 105-113]
Jahed Motlagh, Mohammad Reza Control of Nao Robot Walking On the Basis of Model-Based Predictive Controller [Volume 17, Issue 1, 2017, Pages 229-240]
Jahed Motlagh, Mohammad Reza Single-rod electro-hydraulic servo system control with sliding mode controller improved by parallel fuzzy compensators [Volume 17, Issue 2, 2017, Pages 377-384]
Jalali, Abdolrahim A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation [Volume 17, Issue 1, 2017, Pages 47-55]
Jalali, Ali Theoretical and Numerical investigation on switching process of electroosmotic flow in a Y-shape three-way channel [Volume 17, Issue 12, 2018, Pages 309-318]
Jamaati, Jafar Investigation of non-Newtonian fluid mixing in combined electroosmotic/pressure driven flows inside nonhomogeneous microchannel with rectangular obstacles [Volume 17, Issue 4, 2017, Pages 331-340]
Jamaati, Roohollah Effect of accumulative roll bonding process on microstructure and hardness of A356/TiC cast composite [Volume 17, Issue 9, 2017, Pages 390-396]
Jamaati, Roohollah Optimization of friction stir extrusion processing parameters for AA6063 aluminum alloy using Taguchi method [Volume 17, Issue 12, 2018, Pages 176-182]
Jamali, Ali Pitch Angle Control of a High-Power Wind Turbine Using Optimal Fractional-order PID Controller [Volume 17, Issue 3, 2017, Pages 167-176]
Jamali, Ali Sizing and topology optimization of spatial truss structures using hybrid algorithm of genetic programing and Nelder-Mead [Volume 17, Issue 6, 2017, Pages 32-40]
Jamali, Ghasem Optimization of friction stir extrusion processing parameters for AA6063 aluminum alloy using Taguchi method [Volume 17, Issue 12, 2018, Pages 176-182]
Jamilnia, Reza Optimal trajectory design for soft landing on the Moon by using differential flatness [Volume 17, Issue 10, 2018, Pages 9-19]
Jamshidi, Kamal Practical implementation of a PID - Model Reference Adaptive Controller (MRAC) for a 2-DOF Camera Gimbal [Volume 17, Issue 7, 2017, Pages 325-332]
Jamshidi, Kamal Design and Implementation of a Neural Intelligent Controller and a Hybrid PD Controller for Quadrotor [Volume 17, Issue 10, 2018, Pages 194-204]
Jamshidi, Nima Stress and strain distribution pattern investigation in multi-layer elastic hand prosthesis, inspired by the human skin structure [Volume 17, Issue 5, 2017, Pages 346-352]
Jamshidian, Mostafa Calculation of size-dependent surface energy of metallic nanoplates using molecular dynamics simulations [Volume 17, Issue 11, 2018, Pages 447-452]
Jamshidi Aval, Hamed Investigation on microstructure and wear resistance of in-situ composites coating product by gas tungsten arc welding on 304 stainless steel [Volume 17, Issue 5, 2017, Pages 119-128]
Jamshidi Aval, Hamed A study on the microstructure and mechanical properties of dissimilar joints of copper-nickel alloy and austenitic stainless steel welded by GTAW process [Volume 17, Issue 8, 2017, Pages 49-58]
Jamshidi Aval, Hamed Strength recovery in friction stir welding of AA6061-AA2024 during various post weld heat treatments [Volume 17, Issue 12, 2018, Pages 542-550]
Janatian Ghadikolae, Nima Investigation of effective parameters in point to point control for two-link fish robot [Volume 17, Issue 1, 2017, Pages 173-184]
Jannatabadi, Mohsen Double acting expansion engine simulation performance based on control valve type and gas composition [Volume 17, Issue 2, 2017, Pages 29-40]
Jannesari, Hamid Enhancement of latent heat thermal storage using natural convection deflection [Volume 17, Issue 5, 2017, Pages 267-275]
Jodeiri Habibi, Behnoud Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
Jomehzadeh, Emad Thermo-mechanical behavior of polymer composites exposed to fire [Volume 17, Issue 9, 2017, Pages 86-96]
Jomehzadeh, Emad A Closed Loop Sub-Optimal Guidance Design for Sub-Orbital Flying Systems [Volume 17, Issue 9, 2017, Pages 97-106]
Jowzi, Mohammad Experimental analysis of thermal performance of the modified vacuum tube solar collector [Volume 17, Issue 3, 2017, Pages 55-62]
K
Kabganian, Mansour Trajectory Tracking of a Quadrotor for Obstacle Avoidance Using Super-Twisting Sliding Mode Controller and Observer. [Volume 17, Issue 8, 2017, Pages 333-342]
Kabganian, Mansour Attitude Control of a Quadrotor Using Implementation of Modified PID and Sliding Mode Controllers [Volume 17, Issue 10, 2018, Pages 223-232]
Kabiri, Meisam Trajectory tracking of a VTOL aircraft with uncertainty and disturbances [Volume 17, Issue 8, 2017, Pages 68-74]
Kabirinia, Farid Study on the effect of gap pressure on the geometric characteristics of the tungsten carbide powder produced by electrical discharge [Volume 17, Issue 9, 2017, Pages 254-260]
Kahrom, Mohsen Experimental and Numerical Investigations on the Aerodynamic Performance of a Hinged Bladed Vertical Axis Wind Turbine [Volume 17, Issue 5, 2017, Pages 21-30]
Kalantar, Vali Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
Kalantar-Neyestanaki, Hossein Operational Minimization of Multi-Stage Refrigeration Cyclesâ Power Consumption in Gas Refineries Based on the Combination of Thermodynamics Analysis and Pinch Technology [Volume 17, Issue 6, 2017, Pages 1-12]
Kalateh, Farhoud Numerical simulation of Turgo turbine and water flow interaction using immersed boundary method [Volume 17, Issue 1, 2017, Pages 333-341]
Kalhor, Ahmad Position Control of a 6-DoF Pneumatic Gough-Stewart Parallel Robot Using Backstepping-Sliding Mode Controller [Volume 17, Issue 10, 2018, Pages 101-111]
Kalhor, Ahmad Motion planning of mobile robots in the unknown circumstances based on the receding horizon control and velocity obstacle concepts [Volume 17, Issue 11, 2018, Pages 259-268]
Kamali, Ahmad Nonlinear Model for Autonomous Underwater Vehicle and Identification Based on Least Square Algorithm [Volume 17, Issue 3, 2017, Pages 317-326]
Kamali, Ali Real-time estimation of micro-milling cutting tool deflections by using signals of stages driven by linear motors [Volume 17, Issue 6, 2017, Pages 357-364]
Kamali, Hamed Friction surfacing of AA7075-T6 deposition on AA2024-T351; Statistical modeling using response surface methodology [Volume 17, Issue 8, 2017, Pages 224-230]
Kamali, Marzeh Fractional order sliding mode controller design for quadrotor system [Volume 17, Issue 5, 2017, Pages 287-294]
Kamali Eigoli, Ali Investigation of effective parameters in point to point control for two-link fish robot [Volume 17, Issue 1, 2017, Pages 173-184]
Kamali Eigoli, Ali A Modification in the Decoupled Natural Orthogonal Complement Method, Using Virtual Spring Concepts [Volume 17, Issue 6, 2017, Pages 377-384]
Kamali Eigoli, Ali Trajectory Tracking of a Quadrotor for Obstacle Avoidance Using Super-Twisting Sliding Mode Controller and Observer. [Volume 17, Issue 8, 2017, Pages 333-342]
Kamali Moghaddam, Mina Study the effect of environment temperature on mechanical and fracture behavior of carbon nanotubes [Volume 17, Issue 3, 2017, Pages 87-92]
Kamvar, Majid Performance analysis of coplanar single chamber solid oxide fuel cell with oxygen-methane-nitrogen mixture under steady state conditions [Volume 17, Issue 1, 2017, Pages 31-38]
Kanani, Homayoon Optimization of geometric parameters and excitation frequency of a synthetic jet to avoid separation on the airfoil _ [Volume 17, Issue 12, 2018, Pages 65-76]
Karami, Abbas Hierarchical Position, Orientation and Impedance Control in redundant robots [Volume 17, Issue 8, 2017, Pages 117-125]
Karami, Fatemeh Exact solutions of flow between two concentric pipes and flow over porous wall by a new couple-stress theory [Volume 17, Issue 2, 2017, Pages 369-376]
Karami, Marziyeh Modeling, development, and evaluation of a micro-robot equipped with vibratory actuator [Volume 17, Issue 8, 2017, Pages 413-422]
Karami Moghadam, Mojtaba The effects of laser pulse energy and focal point position on laser surface hardening of AISI 410 stainless steel [Volume 17, Issue 6, 2017, Pages 311-318]
Karami Pabandi, Hossein Effect of tool rotational speed on friction spot joining of aluminum/polymer [Volume 17, Issue 1, 2017, Pages 431-440]
Karbasioun, Matin Developing a design method for optimal geometric and operating parameters of triple pressure heat recovery steam generator using the constructal theory [Volume 17, Issue 5, 2017, Pages 335-345]
Kardan, Iman A new mapping method for joint and Cartesian stiffness, damping and mass matrices for large displacement in impedance control [Volume 17, Issue 1, 2017, Pages 117-128]
Kardan, Iman Agility enhancement using an assistive controller for exoskeleton robots [Volume 17, Issue 9, 2017, Pages 119-129]
Kari, Behrouz The Assessment of Window Blinds effect on Conserving Energy Consumption of Office Building in Tehran [Volume 17, Issue 4, 2017, Pages 17-28]
Karimaei, Hadiseh Coupling of internal flow analysis of an injector with maximum entropy model to predict droplet diameter distribution [Volume 17, Issue 3, 2017, Pages 31-36]
Karimi, Abdollah Equipping of a Hovering Type Autonomous Underwater Vehicle with Ballast Tanks and its effect on Degrees of Freedom [Volume 17, Issue 7, 2017, Pages 397-404]
Karimi, Azam Investigation of Dynamic Heel Height Effect of Shoe on Joints of Lower Body during Walking [Volume 17, Issue 4, 2017, Pages 399-409]
Karimi, Mohammad Taghi Investigation of Dynamic Heel Height Effect of Shoe on Joints of Lower Body during Walking [Volume 17, Issue 4, 2017, Pages 399-409]
Karimian, Majid An Experimental study on Lost Foam Casting using the Taguchi method [Volume 17, Issue 5, 2017, Pages 327-334]
Karimian aliabadi, Saeed Accuracy Evaluation of Semi-empirical and Numerical Methods in Estimation of Aerodynamic Coefficients for air-launch-to-orbit delta wing [Volume 17, Issue 9, 2017, Pages 237-244]
Karimi Firouzjaei, Mehdi Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2018, Pages 259-270]
Karimi zarchi, Hamid Reza The effect of workpiece hardness and cutting parameters on surface roughness in dry hard turning of X210Cr12 cold tool steel [Volume 17, Issue 6, 2017, Pages 241-247]
Karimpour, Hossein Nonlinear Effects on Parametric Resonance of a Beam Subjected to Periodic Mass Transition [Volume 17, Issue 1, 2017, Pages 284-292]
Karimpour, Hossein Practical implementation of a PID - Model Reference Adaptive Controller (MRAC) for a 2-DOF Camera Gimbal [Volume 17, Issue 7, 2017, Pages 325-332]
Karimpour, Morad Design and Analysis of a knee-ankle-foot orthosis using torsional spring [Volume 17, Issue 10, 2018, Pages 185-193]
Karimyan, Amir Vibro-acoustic analysis of tire and rim finite element model coupled with fluid acoustic cavity [Volume 17, Issue 4, 2017, Pages 381-392]
Kasaei, MohammadMehdi Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2018, Pages 259-270]
Kashi, Navid Motion planning of mobile robots in the unknown circumstances based on the receding horizon control and velocity obstacle concepts [Volume 17, Issue 11, 2018, Pages 259-268]
Kassaei, Seyed Iman Aircraft Trajectory Planning with an Altitude-Bound in terrain-following flight [Volume 17, Issue 12, 2018, Pages 135-144]
Kazemi, Mohammad Ali Effects of the equal channel angular pressing (ECAP) on the fracture and fatigue parameters of Al-6063 alloy [Volume 17, Issue 12, 2018, Pages 345-353]
Kazemi, Mohammad Reza Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2018, Pages 229-238]
Kazemi, Reza Collision-Free Navigation and Control for Autonomous Vehicle in Complex Urban Environments [Volume 17, Issue 11, 2018, Pages 277-288]
Kazemi, Sayyed Roohollah Dynamic analysis of long thick cylindrical shell subjected to dynamic internal pressure using high order shear deformation theory [Volume 17, Issue 9, 2017, Pages 427-438]
Kazemi, Seyed Roohollah Effects of the speed of applying loads on the growth of inclined crack in plates using Peridynamic theory [Volume 17, Issue 1, 2017, Pages 403-412]
Kazemian, Arash Experimental Investigation of Using Water and Ethylene Glycol as Coolants in a Photovoltaic Thermal System [Volume 17, Issue 11, 2018, Pages 12-20]
Kazemipour, Alireza Numerical simulation of a near-shore rotating wave energy converter [Volume 17, Issue 1, 2017, Pages 75-85]
Kebriaee, Azadeh Design and numerical analysis of Mach 3.0 inlet [Volume 17, Issue 4, 2017, Pages 199-208]
Kebriaee, Azadeh Effect of thick boundary layer ingestion on the performance of hypersonic inlet [Volume 17, Issue 10, 2018, Pages 73-80]
Keighobadi, Jafar Design and implementation of AHRS by using Kautz function and predictive estimator with Eulerâs dynamic [Volume 17, Issue 6, 2017, Pages 221-232]
Keramati, Masoud Nano-mechanical Study of a Bio Nano Actuator Under External Forces [Volume 17, Issue 12, 2018, Pages 457-462]
Kermani, Ali Mashaallah Optimization of Alpha Type Stirling Engine Phase Angle with Step-By-Step Simulation Method [Volume 17, Issue 10, 2018, Pages 341-349]
Kermani, Elyas Evaluating modulated gradient model in computing subgrid scale tensors [Volume 17, Issue 7, 2017, Pages 283-294]
Kermani, Mohammad Jafar Prediction of degradation in performance of cathode catalyst layer during load cycling [Volume 17, Issue 6, 2017, Pages 67-78]
Keshavarz, Hossein Real Time Direct Kinematics Solution of 3-RPS Parallel Robot Using a Semi-Analytical Homotopy Method [Volume 17, Issue 6, 2017, Pages 303-310]
Keshavarzian, Hasan Design of PID Control strategy for Forward Flight of Quadrotor in the Ground Effect Condition [Volume 17, Issue 12, 2018, Pages 234-242]
Keshavarz Valian, Ali A numerical investigation of Nusselt number and friction coefficient in an arc-type Stirling engine heater [Volume 17, Issue 4, 2017, Pages 85-91]
Keshavarz Valian, Ali Performance enhancement of tube-in-tube heat exchanger utilized in mechanical vapor compression system along with its semi-empirical Nusselt number [Volume 17, Issue 7, 2017, Pages 257-264]
Keshavarz Valian, Ali Numerical investigation of reciprocating flow in a shell and tube heat exchanger used as a cooler in gamma Stirling engine [Volume 17, Issue 10, 2018, Pages 359-366]
Keshmiri, Mehdi Hierarchical Position, Orientation and Impedance Control in redundant robots [Volume 17, Issue 8, 2017, Pages 117-125]
Keshtkar, Hossein 3-Dimentional Simulation of a gaseous injection by Using Modified KIVA-3V Code [Volume 17, Issue 10, 2018, Pages 145-152]
Keymasi Khalaji, Ali Trajectory tracking and stabilization control of a wheeled robot using predictive algorithm [Volume 17, Issue 12, 2018, Pages 167-175]
Khademi, Maziar Investigation of Wrinkling in Hydrodynamic Deep Drawing assisted by Radial Pressure with Inward Flowing Liquid Based on a Geometric Method [Volume 17, Issue 5, 2017, Pages 276-286]
Khademi, Maziar Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method [Volume 17, Issue 11, 2018, Pages 311-322]
Khadiv, Majid Balance Recovery of a Humanoid Robot Using Hip and Ankle Joints on Small Contact Surfaces [Volume 17, Issue 1, 2017, Pages 413-422]
Khairandish, Fatemeh Stability analysis and state feedback controller design for networked control systems with time varying delays [Volume 17, Issue 5, 2017, Pages 77-85]
Khajehsaeid, Hesam Design and modeling of artificial arm muscle using shape memory alloys [Volume 17, Issue 10, 2018, Pages 29-38]
Khajemohammadi, Fatemeh Trajectory and control design of a quadcopter for crossing obstacles using sliding mode method [Volume 17, Issue 6, 2017, Pages 351-356]
Khaji, Naser Stress wave propagation modelling in one-dimensional micropolar rods using a new Wave Finite Element Method [Volume 17, Issue 5, 2017, Pages 405-412]
Khaki, Reza Optimization of geometric parameters and excitation frequency of a synthetic jet to avoid separation on the airfoil _ [Volume 17, Issue 12, 2018, Pages 65-76]
Khakpour Komar Sofla, Amin Dynamic Behavior of a Turbojet Engine in Response to Fuel Flow Rate [Volume 17, Issue 1, 2017, Pages 23-30]
Khakzand, Tohid Numerical investigation of the effect of a liquid fuel droplets diameter in combustion in a 2-D axisymmetric geometry [Volume 17, Issue 2, 2017, Pages 135-146]
Khaleghi, Ali An experimental investigation on viscous fingering instability of Newtonian fluid in transparent porous media with compact structure consist of glass beads [Volume 17, Issue 9, 2017, Pages 245-253]
Khalesi, Mohammad Hossein Multilevel Modeling of an Unmanned Rotorcraft and Robust Controller Design for Trajectory Tracking [Volume 17, Issue 8, 2017, Pages 388-398]
Khalili, Seyed Mohammad Reza Optimizing the self- healing behavior of hollow glass fibers reinforced epoxy matrix composite [Volume 17, Issue 8, 2017, Pages 182-190]
Khalili Sarbangoli, Saeed Thermodynamic analysis of a new hybrid-ejector heat pump and comparison with the hybrid heat pump [Volume 17, Issue 8, 2017, Pages 423-432]
Khalilpour, Seyed Hamed Determination of blast pressure distribution around cylindrical shape based on numerical simulation of explosion [Volume 17, Issue 2, 2017, Pages 19-28]
Khani, Masoud Mechanical and microstructure properties of Al/CNT-Al2O3 hybrid nanocomposite produced by accumulative roll bonding process [Volume 17, Issue 12, 2018, Pages 56-64]
Khanmirza, Esmaeel Schedule Design and Fleet Assignment Based on Modified Intelligent Algorithms [Volume 17, Issue 6, 2017, Pages 59-66]
Khanmirza, Esmael Cooperation Algorithm of Autonomous UAVs for Tracking a Dynamic Target in an Adversarial Environment [Volume 17, Issue 5, 2017, Pages 1-11]
Khansari, Majid Experimental study of ballistic properties of hybrid aluminum and epoxy matrix composite reinforced with carbon nanotube [Volume 17, Issue 8, 2017, Pages 126-132]
Khanzadeh Ghareh Shiran, Mohammad Reza Effect of stand-off distance and the explosive ratio parameters on the properties of explosively bonded copper-aluminum-copper [Volume 17, Issue 1, 2017, Pages 39-46]
Kharazi, Mahsa Study the effect of the incompatible elements on the elastic-plastic behavior of isotropic plates and beams under axial and bending loading [Volume 17, Issue 2, 2017, Pages 177-186]
Khazaee, Majid Damage detection in Glass Fiber Reinforced Plastic (GFRP) using neural network based on denoising with different mother wavelets [Volume 17, Issue 7, 2017, Pages 363-372]
Khazaee, Meghdad Damage detection in Glass Fiber Reinforced Plastic (GFRP) using neural network based on denoising with different mother wavelets [Volume 17, Issue 7, 2017, Pages 363-372]
Khazaei, Iman Effects of chord length, blade pitch angle on hydro kinetic turbineâs power coefficient [Volume 17, Issue 6, 2017, Pages 51-58]
Khodaee, Mohsen Propane and Butane Gas Liquefaction Cycle Optimization Considering Compressor Technical Limitations with Genetic Algorithm [Volume 17, Issue 2, 2017, Pages 315-324]
Khodaei, Saeed Design and fabrication of an autonomous mobile robot equiped with color lasers and its trajectory control based on machine vision [Volume 17, Issue 6, 2017, Pages 213-220]
Khodaei-Mehr, Javad Dynamic Behavior of a Turbojet Engine in Response to Fuel Flow Rate [Volume 17, Issue 1, 2017, Pages 23-30]
Khodarahmi, Hossein Experimental study of ballistic properties of hybrid aluminum and epoxy matrix composite reinforced with carbon nanotube [Volume 17, Issue 8, 2017, Pages 126-132]
Khodaygan, Saeed Build Time Estimation in Additive Manufacturing Processes based on Part Orientations [Volume 17, Issue 8, 2017, Pages 9-16]
Khodaygan, Saeed Static and dynamic tolerance analysis of flexible rotary systems based on the tolerance zone method [Volume 17, Issue 8, 2017, Pages 143-152]
Khodaygan, Saeed Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2018, Pages 157-166]
Khoram, Ali Laser brazing of 321 and 410 stainless steels using BNi-2 nickel-based filler metal [Volume 17, Issue 1, 2017, Pages 129-135]
Khorram, Ali Investigation on the effect of bonding time on microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [Volume 17, Issue 6, 2017, Pages 101-107]
Khorsandi, Yaser Effect of stand-off distance and the explosive ratio parameters on the properties of explosively bonded copper-aluminum-copper [Volume 17, Issue 1, 2017, Pages 39-46]
Khoshbakhti Saray, Rahim Nonlinear Control of Air path in a Turbocharged Diesel Engine Using Optimization [Volume 17, Issue 6, 2017, Pages 168-178]
Khoshnejad, Ali Investigation of Spike Stall Inception and its Propagation in a Low Speed Axial Compressor Rotor [Volume 17, Issue 5, 2017, Pages 111-118]
Khoshnood, Abdolmajid Trajectory and control design of a quadcopter for crossing obstacles using sliding mode method [Volume 17, Issue 6, 2017, Pages 351-356]
Khosravi, Hamed Micro-vascular channel based self-healing fibrous composites under transverse loading [Volume 17, Issue 5, 2017, Pages 63-68]
Khosroabadi, Hasan An Experimental study into the size effect in micromilling process [Volume 17, Issue 10, 2018, Pages 242-248]
Khozeymeh Nezhad, Hojat A numerical and entropy analysis of viscous micropump with an elliptic rotor by LBM and micropump optimization by RSM [Volume 17, Issue 3, 2017, Pages 343-354]
Khozeymeh-Nezhad, Hojjat A numerical analysis of an active micromixer with the oscillating stirrer at the different aspect ratios by LBM [Volume 17, Issue 9, 2017, Pages 417-426]
Kiani, Mehrdad Investigation of Temperature Field and Laminar Flame Structure of Inclined Impinging Jets by Interferometry Mach-Zehnder Experimental Method [Volume 17, Issue 6, 2017, Pages 233-240]
Kokabi, Amir Hossein Effect of tool rotational speed on friction spot joining of aluminum/polymer [Volume 17, Issue 1, 2017, Pages 431-440]
Koohsorkhi, Javad Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
Koosheh, Ali Numerical simulation of Turgo turbine and water flow interaction using immersed boundary method [Volume 17, Issue 1, 2017, Pages 333-341]
Kosari, Amirreza Aircraft Trajectory Planning with an Altitude-Bound in terrain-following flight [Volume 17, Issue 12, 2018, Pages 135-144]
Kosari, Amir Reza Optimization of Planar Low-Thrust Orbit Transfer Maneuver via Fuzzy Optimal Control Approach [Volume 17, Issue 1, 2017, Pages 1-10]
Kosari, Amir Reza Design of Geosynchronous Satellite Flying Formation Based on Translational Dynamics Affected by Attitudinal Situation at Drift Phase [Volume 17, Issue 9, 2017, Pages 107-118]
Kouhikamali, Ramin Numerical investigation of the effect of a liquid fuel droplets diameter in combustion in a 2-D axisymmetric geometry [Volume 17, Issue 2, 2017, Pages 135-146]
Kouravand, Shahriar Optimization of Alpha Type Stirling Engine Phase Angle with Step-By-Step Simulation Method [Volume 17, Issue 10, 2018, Pages 341-349]
L
Lakzian, Esmail A Similarity Solution of the MHD Fluid over a Stretching Sheet: A Qualitative Investigation of the Surface with Constant Suction in Cooling Process [Volume 17, Issue 4, 2017, Pages 341-348]
Lari, Khosro Numerical simulation of thermal effects of continuous wave laser on living tissue with blood perfusion [Volume 17, Issue 4, 2017, Pages 125-133]
Lari, Khosro Thermo-mechanical behavior of polymer composites exposed to fire [Volume 17, Issue 9, 2017, Pages 86-96]
Liaghat, Gholam Hosain The use of the differential quadrature method in the analysis of composite metal cylindrical vessel under dynamical load [Volume 17, Issue 6, 2017, Pages 319-330]
Liaghat, Gholamhossein Improving shear strength in nanocomposites through electrophoretic deposition of carbon nanotubes [Volume 17, Issue 1, 2017, Pages 462-472]
Liaghat, Gholamhossein Numerical investigation of dynamic crack growth in steel pipes under internal detonation loading [Volume 17, Issue 9, 2017, Pages 214-224]
Liaghat, Gholamhossein Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach [Volume 17, Issue 12, 2018, Pages 505-513]
Liaghat, Gholam Hossein Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2018, Pages 42-46]
Lighat, Gholam Hossein Static analysis of transversely anisotropic laminates using improved zig-zag theory subjected to sinusoidal load [Volume 17, Issue 4, 2017, Pages 393-398]
Lissenden, Clifford Jesse Fabrication and test of a piezo-composite transducer for inspection of plate structures in contact with fluid using Lamb waves [Volume 17, Issue 1, 2017, Pages 375-382]
Lofollahi-Yaghin, Mohammad Ali Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of prestressed pipe monitoring using Acoustic Emission technique [Volume 17, Issue 2, 2017, Pages 306-314]
Lotfan, Saeed Stability and bifurcation analysis of a beam-mass-spring-damper system under primary and one-to-three internal resonances [Volume 17, Issue 2, 2017, Pages 166-176]
Lotfi Asadi, Farid Vibration analysis of a cantilever beam with piezoelectric layers under aeroelastic force and base excitation [Volume 17, Issue 1, 2017, Pages 221-228]
M
Maddahian, Reza Numerical simulation of the effect of the geometry and boundary conditions on Supersonic flow in 2D MHD channel . [Volume 17, Issue 8, 2017, Pages 301-312]
Maerefat, Mahdi Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment [Volume 17, Issue 2, 2017, Pages 275-283]
Maerefat, Mahdi Offering an analytical relation for estimation of pollution in enclosed parking lots and expressing the corrective suggestions for improving national building regulations of Iran [Volume 17, Issue 2, 2017, Pages 385-392]
Maerefat, Mehdi Investigating courtyard and its design parameters for thermal performance and comfort in Tehran climate [Volume 17, Issue 4, 2017, Pages 369-380]
Maerefat, Mehdi Theoretical and Experimental Investigation of Heat Generation in Bone Drilling: Determination of the Share of Heat Input to the Bone Using Machining Theory and Inverse Conduction Heat Transfer [Volume 17, Issue 7, 2017, Pages 131-140]
Maerefat, Mehdi Introducing a new thermal comfort model for evaluation of local and overall thermal sensation in non-uniform environments [Volume 17, Issue 8, 2017, Pages 444-450]
Maerefat, Mehdi Dynamic Modeling of Air to Air Variable Refrigerant Flow Heat Pump System [Volume 17, Issue 11, 2018, Pages 397-407]
Mafi, Mostafa Propane and Butane Gas Liquefaction Cycle Optimization Considering Compressor Technical Limitations with Genetic Algorithm [Volume 17, Issue 2, 2017, Pages 315-324]
Mafi, Mostafa Operational Minimization of Multi-Stage Refrigeration Cyclesâ Power Consumption in Gas Refineries Based on the Combination of Thermodynamics Analysis and Pinch Technology [Volume 17, Issue 6, 2017, Pages 1-12]
Mahdian Ahi, Ali AE- based damage investigation in composite laminates under low-velocity impact tests [Volume 17, Issue 7, 2017, Pages 91-100]
Mahdizadeh, Hossein Numerical Modelling of Water Entrance into a Wet Tank Using a Modified Wave Propagation Algorithm [Volume 17, Issue 4, 2017, Pages 168-176]
Mahdizadeh, Hossein A Weakly Coupled Scheme for Modelling Bedload Sediment Transport Using an Augmented Riemann Solver [Volume 17, Issue 9, 2017, Pages 409-416]
Mahdizadeh, Hossein Numerical Modelling of Flood Waves Propagation in Sewer Networks using one- and Two-Dimensional Modified HLLC Method [Volume 17, Issue 7, 2017, Pages 273-282]
Mahmoodi, Masoud Investigation of the effective parameters on the mechanical and structural properties of aluminum wire sample fabricated by friction stir extrusion [Volume 17, Issue 4, 2017, Pages 78-84]
Mahmoodi, MohammadJavad Fault detection of laminated composite plate with delamination damage using neural network training based on the free vibration response [Volume 17, Issue 5, 2017, Pages 221-231]
Mahmoodi, MohammadJavad Micromechanical modeling of effective elastic properties of hybrid nanocomposites reinforced by fuzzy fiber containing carbon nanotubes [Volume 17, Issue 9, 2017, Pages 261-272]
Mahmoodi Darian, Hossein Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
Mahmoodi Darian, Hossein Development of an Open-Source Software framework for Finite Difference Schemes with Parallel Processing Feature [Volume 17, Issue 12, 2018, Pages 400-408]
Mahmoudi, Ali Experimental Investigation and Numerical Simulation of Fluid-Structure Interaction on Hydroforming Process of Triangular Plates Under Impact Loading [Volume 17, Issue 12, 2018, Pages 114-122]
Mahmoudimehr, Javad Numerical investigation of the effect of a liquid fuel droplets diameter in combustion in a 2-D axisymmetric geometry [Volume 17, Issue 2, 2017, Pages 135-146]
Mahmoud Soltani, Hamed Study the effect of the incompatible elements on the elastic-plastic behavior of isotropic plates and beams under axial and bending loading [Volume 17, Issue 2, 2017, Pages 177-186]
Mahpeykar, Mohammad Reza Comparison between polydispersed and monodispersed models on condensing water-vapor flow in a supersonic convergent-divergent nozzle [Volume 17, Issue 3, 2017, Pages 19-30]
Majidi, Ali-Akbar Study of macroscopic fracture surface characteristics of spiral welded API X65 gas transportation pipeline steel [Volume 17, Issue 11, 2018, Pages 219-228]
Maleki, Hamid Effects of suction/injection on flow and heat transfer over a permeable surface in presence of different nanofluids [Volume 17, Issue 9, 2017, Pages 439-449]
Maleki, Seyyed Mohammad Reza Investigating courtyard and its design parameters for thermal performance and comfort in Tehran climate [Volume 17, Issue 4, 2017, Pages 369-380]
Malek Jafarian, Majid Two-Objective Optimization of Aerodynamic Shapes Using Gravitational Search Algorithm [Volume 17, Issue 5, 2017, Pages 211-220]
Malekzadeh Fard, Keramat buckling and Vibration analysis of a thick cylindrical sandwich panel with flexible core using an improved high-order theory [Volume 17, Issue 3, 2017, Pages 227-238]
Mamourian, Mojtaba Trajectory Investigation of a Transonic Spherical Projectile under Hop-Up Mechanism Using Simulation of Turbulent Three-Dimensional Non-Stationary Flow [Volume 17, Issue 9, 2017, Pages 25-35]
Manshoori Yeganeh, Ahmad Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2018, Pages 157-166]
Mansoori, Hasan A novel numerical method for fatigue life prediction under non-proportional loadings [Volume 17, Issue 5, 2017, Pages 232-242]
Mansoori, Seyyed Mohammad Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2018, Pages 229-238]
Mansouri, Hadi Investigation of ECAR process on the corrosion behavior of pure commercial copper [Volume 17, Issue 10, 2018, Pages 39-46]
Mansouri, seyed Hossein Pore Scale Modelling of Cathode Catalyst Layer of PEM Fuel Cell to Investigate the Tortuosity and Effective Diffusivity [Volume 17, Issue 2, 2017, Pages 10-18]
Mansouri, Seyed Hossein Radiative Calculations for Non-Gray Media with Heat Sourcesby using the Spectral Line-Based Weighted Sum of Gray Gases Model [Volume 17, Issue 1, 2017, Pages 106-116]
Mansouri, Seyed Hossein Radiation effect in a compression ignition internal combustion engine combustion chamber assuming gray media [Volume 17, Issue 12, 2018, Pages 286-296]
Mansouri Nik, Mohsen Experimental and Numerical Analysis of Sandwich Composite Beams under Four-Point Bending [Volume 17, Issue 1, 2017, Pages 241-252]
Marefat, Mehdi Proposing of practical relation to estimate amount indoor air pollutants [Volume 17, Issue 2, 2017, Pages 446-450]
Marefat, Vahid Continuous Time Discrete State Markovian Approach for Reliability Assessment of Missile System During its Life Cycle [Volume 17, Issue 6, 2017, Pages 413-422]
Masdari, Mehran Experimental investigation of ground effects on aerodynamics characteristics of a delta wing airplane model [Volume 17, Issue 9, 2017, Pages 281-289]
Mashayekhi, Ahmad A novel Lyapunov function for stability of haptic device in simulating virtual objects [Volume 17, Issue 10, 2018, Pages 367-374]
Masoomi, Mahmood Investigation and simulation of geometric and optical quality for bi-convex lens produced by injection molding process [Volume 17, Issue 12, 2018, Pages 21-32]
Masoomi, Mobin Numerical investigation of symmetry and asymmetry rigid wedge slamming using OpenFOAM code [Volume 17, Issue 7, 2017, Pages 343-352]
Masoumi, Ali Asghar The use of the differential quadrature method in the analysis of composite metal cylindrical vessel under dynamical load [Volume 17, Issue 6, 2017, Pages 319-330]
Masoumnezhad, Mojtaba The hybrid unscented /Hâ Kalman filter in state estimation of nonlinear problems [Volume 17, Issue 4, 2017, Pages 315-321]
Masrori Saadat, Seyed Hossein A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2018, Pages 312-320]
Masrouri, Milad Slab analysis of front and back tensions effects on decreasing force and pressure in asymmetrical rolling process of unbonded clad sheet [Volume 17, Issue 7, 2017, Pages 431-440]
Mazaheri, Kiumars Comparison of some global chemical kinetics effects on methane lifted flame 3D simulation [Volume 17, Issue 8, 2017, Pages 105-116]
Mazidi Sharfabadi, Mohammad The Modification of the Conventional Genetic Algorithm for Solving Inverse Heat Transfer Problems [Volume 17, Issue 11, 2018, Pages 408-418]
Mehrabi, Mojtaba Thermal analysis, effect of lubricant and fatigue life of spiral bevel gears of main gearbox [Volume 17, Issue 8, 2017, Pages 38-48]
Mehrabi, Omid The Effect of Low Power CO2 Laser Cutting Process Parameters on Polycarbonate Cut Quality Produced By Injection Molding [Volume 17, Issue 2, 2017, Pages 93-100]
Mehrgoo, Morteza Developing a design method for optimal geometric and operating parameters of triple pressure heat recovery steam generator using the constructal theory [Volume 17, Issue 5, 2017, Pages 335-345]
Menhaj, Mohammad Bagher Trajectory tracking of a VTOL aircraft with uncertainty and disturbances [Volume 17, Issue 8, 2017, Pages 68-74]
Mihandoust, Atiyeh Numerical simulation of inlet vortex near the inlet air duct of an aircraft engine in headwind condition [Volume 17, Issue 6, 2017, Pages 90-100]
Mir, Mohammad Failure Mode Characterization and Dominant Mode Determination in Progressive Damage Due to High Velocity Impact on Woven Composite Laminates [Volume 17, Issue 8, 2017, Pages 313-322]
Mirbozorgi, Seyed Ali Numerical simulation of free convection around a stationary cylinder with constant heat flux and different diagonal locations using IB-LBM [Volume 17, Issue 4, 2017, Pages 419-430]
Mirchi, Pedram Calculation of diffusion coefficients in a normal tissue and tumor using the Levenberg-Marquardt method [Volume 17, Issue 4, 2017, Pages 1-8]
Mirdamadi, Hamidreza Behaviour analysis of a bistable twisting hybrid composite plate with an external metal layer and effecting factors on stability region [Volume 17, Issue 2, 2017, Pages 420-426]
Mirghavami, Mohamad Hydrodynamic Design and Numerical Simulation of a Very Low Head Axial Turbine (VLH) [Volume 17, Issue 12, 2018, Pages 373-381]
Mirnia, Mohammadjavad Experimental Determination and Numerical Prediction of Necking and Fracture Forming Limit Curves of 2024 Aluminum Alloy Sheet Using Damage Criterion [Volume 17, Issue 9, 2017, Pages 361-371]
Mirnia, Mohammad Javad Investigation of the effective parameters in the bulging process and obtaining Forming limit curve of the stainless steel tube by the GTN criterion [Volume 17, Issue 6, 2017, Pages 365-376]
Mirshams, Mehran Fast determination of system specifications of GEO communication satellites. [Volume 17, Issue 2, 2017, Pages 404-412]
Mirshekari, Sara Extraction of optimum design process for satellite solar panel based on reliability and solutions to improve it [Volume 17, Issue 8, 2017, Pages 241-251]
Mirzaei, Masoud Experimental Study of Flow Control Over an Ahmed Body Using Plasma Actuator [Volume 17, Issue 12, 2018, Pages 523-530]
Mirzaei, Mehdi Nonlinear Control of Air path in a Turbocharged Diesel Engine Using Optimization [Volume 17, Issue 6, 2017, Pages 168-178]
Mirzaei, Mehdi Robust Model Predictive Control for Active Suspension System using Linear Matrix Inequalities [Volume 17, Issue 12, 2018, Pages 183-192]
Mirzajani, Mohsen Stress wave propagation modelling in one-dimensional micropolar rods using a new Wave Finite Element Method [Volume 17, Issue 5, 2017, Pages 405-412]
Mirzakhani, Bahman Theoretical, numerical and experimental analysis of a planar wobble motor driven by shape memory alloy (SMA)wires [Volume 17, Issue 6, 2017, Pages 401-412]
Mirzanejad, Hossein Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
Moarefzadeh, Mohammad Reza Reliability analysis of mechanical systems using directional simulation and an efficient importance sampling technique [Volume 17, Issue 7, 2017, Pages 217-224]
Moavenian, Majid Optimal fuzzy controller design for beyond pull-in stabilization of circular micro-plates [Volume 17, Issue 1, 2017, Pages 151-160]
Moavenian, Majid Investigation of the effect of control unit on disruption to fault detection of vehicle active suspension system with hydraulic actuator [Volume 17, Issue 4, 2017, Pages 443-452]
Moazam, Mohammad Ali Application of CVN and 3-point bending in determination of critical fracture toughness of 46E2 and 60E1 rails [Volume 17, Issue 4, 2017, Pages 61-66]
Moazami Goudarzi, Ali Investigation of the mechanical properties of the porous scaffolds used in bone tissue engineering by means of micromechanical modeling [Volume 17, Issue 9, 2017, Pages 397-408]
Modabberifar, Mehdi Theoretical, numerical and experimental analysis of a planar wobble motor driven by shape memory alloy (SMA)wires [Volume 17, Issue 6, 2017, Pages 401-412]
Moeenfard, Hamid Optimal fuzzy controller design for beyond pull-in stabilization of circular micro-plates [Volume 17, Issue 1, 2017, Pages 151-160]
Moein Jahromi, Mahbod Prediction of degradation in performance of cathode catalyst layer during load cycling [Volume 17, Issue 6, 2017, Pages 67-78]
Moeinkhah, Hossein Non-linear vibration of curved microbeam under electrostatic actuation by using reduced order model and finite element simulation [Volume 17, Issue 12, 2018, Pages 514-522]
Moetakef-Imani, Behnam Identification and control of an active boring bar using VCA actuator [Volume 17, Issue 8, 2017, Pages 87-96]
Moghadasian, Mehdi Continuous maneuver of unmanned aerial vehicle using High Order Expansions method for optimal control problem [Volume 17, Issue 12, 2018, Pages 382-390]
Moghaddam, Hamidreza Robust control of anti-lock braking system using optimized fast terminal sliding mode controller [Volume 17, Issue 4, 2017, Pages 290-298]
Moghiman, Mohammad Comparison of effects of adding various carbon nanotube concentrations and increase C/H mass ratio of liquid fuels on combustion behavior and flame thermal radiation [Volume 17, Issue 9, 2017, Pages 205-213]
Mohaddes Daylami, Hamed Numerical analysis of the electric field effect on mass transfer through
a moist object [Volume 17, Issue 1, 2017, Pages 383-393]
Mohajeri, Seyed Hossein Effects of chord length, blade pitch angle on hydro kinetic turbineâs power coefficient [Volume 17, Issue 6, 2017, Pages 51-58]
Mohajeri, Seyed Hossein Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
Mohamadrezaei, Mohsen Comparison of different methods of numerical simulation of flow and sound fields around a square cylinder at various incidence angles [Volume 17, Issue 5, 2017, Pages 147-158]
Mohammad Ebrahim, Abolfazel Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
Mohammadi, Bijan Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
Mohammadi, Bijan Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
Mohammadi, Bijan Investigation of Gas Compression Process inside Oleo-Pneumatic Shock-Absorber with Two-Phase Flow Simulation Method [Volume 17, Issue 8, 2017, Pages 133-142]
Mohammadi, Hossein Aeroacoustic Investigation of Flow over the Diamond, Cropped and Cranked Arrow Delta Wings Using Large Eddy Simulation Approach [Volume 17, Issue 5, 2017, Pages 430-438]
Mohammadi, Hossein Designing virtual vibration absorber with adaptable stiffness for vibrations control under harmonic excitation with noise in time-varying frequency [Volume 17, Issue 7, 2017, Pages 353-362]
Mohammadi, Mehrdad Thermal post-buckling analysis of eccentrically stiffened FG cylindrical shells surrounded by elastic foundation and subjected to thermal radial loading [Volume 17, Issue 3, 2017, Pages 397-404]
Mohammadi, Reza The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
Mohammadi, Reza Investigation of failure mechanisms of notched aluminum plates repaired with composite patches using acoustic emission method [Volume 17, Issue 8, 2017, Pages 406-412]
Mohammadian Aftah, Nafiseh Trajectory tracking of a tractor-trailer robot using model predictive control [Volume 17, Issue 11, 2018, Pages 210-218]
Mohammadimehr, Mehdi Thermal analysis, effect of lubricant and fatigue life of spiral bevel gears of main gearbox [Volume 17, Issue 8, 2017, Pages 38-48]
Mohammadi Moghaddam, Majid Investigating the effect of viscoelastic ankle foot prosthesis on below-knee amputee gait cycle: Modeling and simulation [Volume 17, Issue 1, 2017, Pages 311-321]
Mohammadi Moghaddam, Majid Kinematic Analysis and Mechatronic Design of a 3-DOF Parallel Robot for Craniotomy Surgery [Volume 17, Issue 11, 2018, Pages 289-299]
Mohammadi Nasrabadi, Ali Asghar Design, modeling and simulation of weight compensation walking assistant robot [Volume 17, Issue 5, 2017, Pages 41-51]
Mohammadi Nia, Vahid The Investigation of mechanical and metallurgical properties of multi-layered Al/Cu composite produced by Accumulative Press Bonding (APB) process [Volume 17, Issue 2, 2017, Pages 109-114]
Mohammadipoor, Omid Reza Theoretical and Numerical investigation on switching process of electroosmotic flow in a Y-shape three-way channel [Volume 17, Issue 12, 2018, Pages 309-318]
Mohammadipour, Dariush Numerical Analysis on the Effects of Impeller Geometry Parameters for a Centrifugal Pump in Reverse Operation [Volume 17, Issue 9, 2017, Pages 13-24]
Mohammadipour, Mohamad Hossein Analytical investigation of the effect of fibrous tow position and radius on impregnation, pulling force and pressure profile in pultrusion process of thermoplastics [Volume 17, Issue 6, 2017, Pages 128-138]
Mohammadipour, Omid Reza Geometry and Zeta Potential Effects on Electroosmotic Mixing in Converging (Diverging) Microchannel using Lattice Boltzmann Method [Volume 17, Issue 6, 2017, Pages 331-341]
Mohammadi Pour, Reza Analytical study the ballistic behavior of thin laminated composite plates based on tsai-hill and maximum strain criterions [Volume 17, Issue 6, 2017, Pages 41-50]
Mohammadi Shoja, Hossein Elastic behavior of an edge dislocation in a core-shell nanowire embedded to an infinite matrix within surface/interface theory of elasticity [Volume 17, Issue 2, 2017, Pages 439-445]
Mohammad Kari, Behrooz Investigating courtyard and its design parameters for thermal performance and comfort in Tehran climate [Volume 17, Issue 4, 2017, Pages 369-380]
Mohammad Kari, Behrouz Proposing of practical relation to estimate amount indoor air pollutants [Volume 17, Issue 2, 2017, Pages 446-450]
Mohammadkhani, Hasan Design Type-2 Fuzzy Systems for Identification and Fault Detection of Nonlinear systems For Three-tank system, Electro-hydraulic System [Volume 17, Issue 1, 2017, Pages 342-352]
Mohammadmoradi, Shahab Robust Model Predictive Control for Active Suspension System using Linear Matrix Inequalities [Volume 17, Issue 12, 2018, Pages 183-192]
Mohammadpourfard, Mousa Numerical modeling of magnetic nanofluid pumping in a closed cooling loop by using magnetic field and thermomagnetic effect [Volume 17, Issue 11, 2018, Pages 109-117]
Mohammadzadeh, Hamed Reliability based topology optimization for maximizing stiffness and frequency simultaneously [Volume 17, Issue 4, 2017, Pages 111-116]
Mohammadzadeh, Hamed Reliability-based topology optimization of continuous structure using particle swarm algorithm [Volume 17, Issue 7, 2017, Pages 265-272]
Mohammadzadeh Kowsari, Milad Effect of inter-particle mass transfer resistance on the performance parameters of an adsorption chiller with finned flat-tube heat exchanger [Volume 17, Issue 3, 2017, Pages 414-424]
Mohaseb Karimlou, Mohammadreza Influence of pre-strain and position of shape memory alloy wire on buckling properties of smart fibers metal composite [Volume 17, Issue 11, 2018, Pages 429-436]
Mohebi, Mostafa 3D Simulation of Performance and Pollution of Hydrogen-Diesel Combustion in Heavy Duty Engine [Volume 17, Issue 3, 2017, Pages 177-186]
Mohseni, Arman Effects of chord length, blade pitch angle on hydro kinetic turbineâs power coefficient [Volume 17, Issue 6, 2017, Pages 51-58]
Mohseni, Arman Three-Dimensional Aerothermodynamic Optimization of the Stator Blade of an Axial-Flow Gas Turbine in an Open-Source Platform [Volume 17, Issue 10, 2018, Pages 176-184]
Mohseni, Mahdi Effects of suction/injection on flow and heat transfer over a permeable surface in presence of different nanofluids [Volume 17, Issue 9, 2017, Pages 439-449]
Mohtasebi, Seyed Saeid Intelligent fault diagnosis of cooling radiator based on thermal image processing and artificial intelligence techniques [Volume 17, Issue 2, 2017, Pages 240-250]
Mohtasebi, Seyed Saeid Bladed Disk Nodal Diameter Extraction by Numerical and Experimental Methods [Volume 17, Issue 2, 2017, Pages 343-349]
Mohtasebi, Seyed Saeid Online proportional myoelectric control of a humanoid shoulder motions using electromyogram signals [Volume 17, Issue 9, 2017, Pages 1-12]
Mohtasebi, Seyed Saeid Numerical simulation of wind turbine in Manjil wind farm considering wind regime study [Volume 17, Issue 9, 2017, Pages 75-85]
Mohtashami, Ali Modeling of groundwater flow in unconfined aquifer in steady state with meshless local Petrov-Galerkin [Volume 17, Issue 2, 2017, Pages 393-403]
Mojallali, Hamed Robust control of anti-lock braking system using optimized fast terminal sliding mode controller [Volume 17, Issue 4, 2017, Pages 290-298]
Mojarrabi Tabrizi, Mohammad Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
Mokhtari, Abolfazl Nonlinear Estimation of Flight Mode characteristics in Spin Maneuver by using Empirical Mode Decomposition Algorithm and Hilbert Transform [Volume 17, Issue 1, 2017, Pages 322-332]
Mokhtarian, Ali Investigation of Dynamic Heel Height Effect of Shoe on Joints of Lower Body during Walking [Volume 17, Issue 4, 2017, Pages 399-409]
Mokhtari Dizaji, Manijhe A finite element viscoelastic model based on consecutive transverse ultrasound images of carotid artery [Volume 17, Issue 7, 2017, Pages 421-430]
Molaei, Majid Experimental and Numerical Study on Effects of Process Parameters on Working Zone in Hydro-mechanical Deep Drawing of Two-layer Conical Parts [Volume 17, Issue 3, 2017, Pages 72-78]
Mollaei-Dariani, Bijan Experimental Determination and Numerical Prediction of Necking and Fracture Forming Limit Curves of 2024 Aluminum Alloy Sheet Using Damage Criterion [Volume 17, Issue 9, 2017, Pages 361-371]
Mollahoseini, Zahra A Hyper-Viscoelastic Model for an Individual Stem Cell Subjected to Cyclic Loading for Mechanical Modulation toward Differentiating to Fibrochondrocytes [Volume 17, Issue 7, 2017, Pages 207-216]
Mollazadeh, Mahdi Modeling of groundwater flow in unconfined aquifer in steady state with meshless local Petrov-Galerkin [Volume 17, Issue 2, 2017, Pages 393-403]
Momeni, Amir Fabrication of Al 2024-boron carbide surface nano composite by friction stir processing [Volume 17, Issue 8, 2017, Pages 343-350]
Momeni, Pejman Effect of accumulative roll bonding process on microstructure and hardness of A356/TiC cast composite [Volume 17, Issue 9, 2017, Pages 390-396]
Monshizadeh, Morteza Experimental investigation of dynamics of the air-core vortices and estimating the air entrainment rate at a horizontal intake [Volume 17, Issue 8, 2017, Pages 59-67]
Moodi, Sadegh Numerical Modelling of Water Entrance into a Wet Tank Using a Modified Wave Propagation Algorithm [Volume 17, Issue 4, 2017, Pages 168-176]
Moodi, Sadegh Numerical Modelling of Flood Waves Propagation in Sewer Networks using one- and Two-Dimensional Modified HLLC Method [Volume 17, Issue 7, 2017, Pages 273-282]
Moosapour, Seyyed Sajjad Fractional Order Backstepping Fast Terminal Sliding Mode Control for Micro-Electro-Mechanical triaxial gyroscope [Volume 17, Issue 5, 2017, Pages 385-393]
Moosavi, Mohamadreza Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
Moosavian, Seyed Aliakbar Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
Moosavian, Seyed Ali Akbar Design, modeling and simulation of weight compensation walking assistant robot [Volume 17, Issue 5, 2017, Pages 41-51]
Moosavy, Seyed Hossein Investigation of optimized body tilt angle and acoustic excitation affecting performance of hydro cyclone particles separator based on genetic algorithm [Volume 17, Issue 3, 2017, Pages 37-46]
Moradi, Mahmoud Laser brazing of 321 and 410 stainless steels using BNi-2 nickel-based filler metal [Volume 17, Issue 1, 2017, Pages 129-135]
Moradi, Mahmoud The Effect of Low Power CO2 Laser Cutting Process Parameters on Polycarbonate Cut Quality Produced By Injection Molding [Volume 17, Issue 2, 2017, Pages 93-100]
Moradi, Mahmoud Investigation on the effect of bonding time on microstructure and mechanical properties of transient liquid phase bonding between Inconel 718 and Inconel 600 [Volume 17, Issue 6, 2017, Pages 101-107]
Moradi, Mahmoud The effects of laser pulse energy and focal point position on laser surface hardening of AISI 410 stainless steel [Volume 17, Issue 6, 2017, Pages 311-318]
Moradi, Mahmoud Friction surfacing of AA7075-T6 deposition on AA2024-T351; Statistical modeling using response surface methodology [Volume 17, Issue 8, 2017, Pages 224-230]
Mosadegh, Peiman Investigation and simulation of geometric and optical quality for bi-convex lens produced by injection molding process [Volume 17, Issue 12, 2018, Pages 21-32]
Mosadeghi, Mohammad Reza Fracture assessment of specimens weakened by U-notch made of functionally graded materials under mode I loading [Volume 17, Issue 2, 2017, Pages 1-9]
Mosallaee, Masoud Improvement of wearing property of Al/ (SiC+BNh) surface hybrid composite fabricated by friction stir processing [Volume 17, Issue 9, 2017, Pages 381-389]
Mosavi, M Effects of PTCAP as a severe plastic deformation method on the mechanical and microstructural properties of AZ31 magnesium alloy [Volume 17, Issue 12, 2018, Pages 409-416]
Moslemi Naeini, Hassan Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2018, Pages 259-270]
Mossaiby, Farshid Solving time-dependent problems using the generalized exponential basis functions method [Volume 17, Issue 10, 2018, Pages 271-280]
Mostaan, Hossein Experimental investigation of butt weld friction stir welding of IF steel with thickness of 0.7 mm [Volume 17, Issue 5, 2017, Pages 69-76]
Mostafapour, Amir The Investigation of mechanical and metallurgical properties of multi-layered Al/Cu composite produced by Accumulative Press Bonding (APB) process [Volume 17, Issue 2, 2017, Pages 109-114]
Mostafapour, Amir Friction surfacing of AA7075-T6 deposition on AA2024-T351; Statistical modeling using response surface methodology [Volume 17, Issue 8, 2017, Pages 224-230]
Mostofizadeh, Alireza Numerical estimation of the wing boundary layer transition in propeller flowfield [Volume 17, Issue 2, 2017, Pages 157-165]
Motaghian, Shahrooz Developing a pyrolysis model for numerical simulation of thermal decomposition in combustible solid [Volume 17, Issue 1, 2017, Pages 86-94]
Motallebpouralishahi, Mehrdad Experimental Investigation of Metal Removal Efficiency and Machined Surface Texture in EDM of Titanium Aluminide Compound [Volume 17, Issue 12, 2018, Pages 47-55]
Motamedalshariati, Seyed Hadi Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
Mottahedi, Hamid Reza Numerical study of the performance of an oscillating wave surge converter using volume of fluid method [Volume 17, Issue 6, 2017, Pages 265-276]
Mousavi, Emad Numerical simulatoin of poolfire suppression using water mist system
investigating nozzle parameter effects [Volume 17, Issue 2, 2017, Pages 350-358]
Mousavi, Seyed Meysam Study of electrohydraulic forming process by using experimental observations and numerical simulation with ALE method [Volume 17, Issue 4, 2017, Pages 299-306]
Mousavi, Seyed Meysam Evaluation and optimization of drawing depth in electrohydraulic forming
(with bridge wire between electrodes) [Volume 17, Issue 9, 2017, Pages 137-144]
Mousavi, Seyed Meysam Investigation of forming limit of brass alloy c260 at high strain rate by using electrohydraulic forming process [Volume 17, Issue 11, 2018, Pages 144-150]
Mousavi, Zahrasadat A New Method for Bending Analysis of Nano Beam and Rectangular Nano Plate: Full Modified Nonlocal Theory [Volume 17, Issue 3, 2017, Pages 376-384]
Mousavi Mohammadi, Ali A new mapping method for joint and Cartesian stiffness, damping and mass matrices for large displacement in impedance control [Volume 17, Issue 1, 2017, Pages 117-128]
Mousavi Nainiyan, Seyed Mojtaba Experimental Study of Flow Control Over an Ahmed Body Using Plasma Actuator [Volume 17, Issue 12, 2018, Pages 523-530]
Movahed, Saeed Prediction of degradation in performance of cathode catalyst layer during load cycling [Volume 17, Issue 6, 2017, Pages 67-78]
Movahedi, Alireza Comparison of different methods of numerical simulation of flow and sound fields around a square cylinder at various incidence angles [Volume 17, Issue 5, 2017, Pages 147-158]
Movahedi, Alireza Experimental Investigation of aero acoustic noise generation process from a wall mounted square cylinder at incidence [Volume 17, Issue 9, 2017, Pages 327-338]
Movahedi, Mojtaba Effect of tool rotational speed on friction spot joining of aluminum/polymer [Volume 17, Issue 1, 2017, Pages 431-440]
Movahedi, Mojtaba Influence of heat-input on mechanical behavior and phase balance of 2304 duplex stainless steel resistance spot welds [Volume 17, Issue 5, 2017, Pages 159-165]
Movahedi, Mojtaba Microstructure and mechanical properties of aluminum to aluminum clad steel lap joint using gas tungsten arc welding process [Volume 17, Issue 12, 2018, Pages 328-336]
Movahednejad, Ehsan Coupling of internal flow analysis of an injector with maximum entropy model to predict droplet diameter distribution [Volume 17, Issue 3, 2017, Pages 31-36]
Movahedy, Mohammad Reza Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2018, Pages 157-166]
Mozafari-Shamsi, Mohsen Combination of ghost fluid-lattice Boltzmann and refilling methods for simulation of the moving curved boundaries with heat transfer [Volume 17, Issue 2, 2017, Pages 263-274]
Musavi, Seyed Hasan Development a new cutting tool by changing the surface texture for increasing the machining performance [Volume 17, Issue 7, 2017, Pages 441-450]
N
Nabavi, Nader Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
Nabipour, Mojtaba Effect of printing parameters on Mechanical Strength of Polymer-Metal composites Printed via FDM 3D printer [Volume 17, Issue 1, 2017, Pages 145-150]
Nabipour, Mostafa Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
Naddafi Pour Meibody, mohammad Modeling and System Identification of a reaction wheel with experimental data [Volume 17, Issue 11, 2018, Pages 437-446]
Naderan Tahan, Hamid Investigation of effective parameters in point to point control for two-link fish robot [Volume 17, Issue 1, 2017, Pages 173-184]
Naderi, Nasim Numerical Investigation of Fluid Flow and Hemolysis in Axial and Centrifugal Pump as Left Ventricular Assist Device (LVAD) [Volume 17, Issue 3, 2017, Pages 135-142]
Naeemi Amini, Pooria Identification and control of an active boring bar using VCA actuator [Volume 17, Issue 8, 2017, Pages 87-96]
Naghash, Abolghasem Comparison of Back Stepping Optimized via PSO Algorithm and LQR Controllers for a Quadrotor [Volume 17, Issue 7, 2017, Pages 413-420]
Najafi, Amir Farhad Numerical Analysis on the Effects of Impeller Geometry Parameters for a Centrifugal Pump in Reverse Operation [Volume 17, Issue 9, 2017, Pages 13-24]
Najafi, Ebrahim Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
Najafi, Majdeddin Design of an Hâ-PID Controller for an UAV Auto-Landing System Based on External Navigation [Volume 17, Issue 11, 2018, Pages 89-96]
Najafi, Mohammad Rasool Dynamic Modeling and Optimal Adaptive Robust Control of an Omni Directional Mobile Robot Using Harmony Search Algorithm [Volume 17, Issue 8, 2017, Pages 191-200]
Najafi, Moslem Effect of Different Environmental Conditions on Impact Properties of FMLs Hybridized with Nanoclay [Volume 17, Issue 12, 2018, Pages 193-203]
Najafi Amel, Alireza Optimization of Alpha Type Stirling Engine Phase Angle with Step-By-Step Simulation Method [Volume 17, Issue 10, 2018, Pages 341-349]
Najarian, Armin Numerical Modeling of High-Speed Tunneled Hull Turning Circle Maneuver for Investigating the Speed and Rudder Angle Effects on Maneuver Parameters [Volume 17, Issue 2, 2017, Pages 85-92]
Najati Ilkhchi, Reza Study on the effect of gap pressure on the geometric characteristics of the tungsten carbide powder produced by electrical discharge [Volume 17, Issue 9, 2017, Pages 254-260]
Naji Ghazvini, Ahmad Nonlinear Model Updating of Composite-Metal Single Lab Bolted Joint Using High Order Response Amplitude Approximation [Volume 17, Issue 11, 2018, Pages 39-46]
Najjaran, Samieh Energy management in order to reduce fuel consumption for parallel Plug-in Hybrid Electric vehicles based on fuzzy predictive control [Volume 17, Issue 5, 2017, Pages 353-362]
Nakhaei, Vahid Fabrication and Thermal Modeling of Unglazed Transpired Solar Air Heater Collectors with metallic (Steel) and non-metallic absorber plates [Volume 17, Issue 9, 2017, Pages 339-350]
Namazian, Jafar Numerical simulation of fluid flow penetration through porous media using Lattice Boltzmann method [Volume 17, Issue 6, 2017, Pages 79-89]
Namazian, Zafar Numerical simulation of fluid flow penetration through porous media using Lattice Boltzmann method [Volume 17, Issue 6, 2017, Pages 79-89]
Namazizadeh, Mohammad Experimental and numerical study of double splitter blades effect on the centrifugal pump performance [Volume 17, Issue 3, 2017, Pages 196-204]
Nankali, Mohammad Development a new cutting tool by changing the surface texture for increasing the machining performance [Volume 17, Issue 7, 2017, Pages 441-450]
Naraghi, Mahyar Optimal design of a limit cycle walker under the push-off actuation [Volume 17, Issue 8, 2017, Pages 279-290]
Narimanzadeh, Nader The hybrid unscented /Hâ Kalman filter in state estimation of nonlinear problems [Volume 17, Issue 4, 2017, Pages 315-321]
Nariman Zadeh, Nader Sizing and topology optimization of spatial truss structures using hybrid algorithm of genetic programing and Nelder-Mead [Volume 17, Issue 6, 2017, Pages 32-40]
Naseh, Hassan Propellant Management Device (PMD) Design Optimization of Hydrazine Fuel Tank [Volume 17, Issue 7, 2017, Pages 152-160]
Naserian, Mohammad Mahdi Evaluation combined cycle irreversible on the criteria of maximum power in finite time thermodynamics [Volume 17, Issue 11, 2018, Pages 333-342]
Nasiri, Hadiseh Control of Nao Robot Walking On the Basis of Model-Based Predictive Controller [Volume 17, Issue 1, 2017, Pages 229-240]
Nassiri-Toosi, Ali 3-Dimentional Simulation of a gaseous injection by Using Modified KIVA-3V Code [Volume 17, Issue 10, 2018, Pages 145-152]
Navid Chakherlou, Tajbakhsh Experimental investigation and numerical simulation of the fatigue behavior of interference fitted specimens subjected to bolt clamping force [Volume 17, Issue 11, 2018, Pages 247-258]
Nayeri, Mohammad Reza The effect of minimum quantity lubrication on surface roughness in hard turning of 100Cr6 bearing steel with Nano-CBN tool [Volume 17, Issue 3, 2017, Pages 263-269]
Nazarahari, Milad Schedule Design and Fleet Assignment Based on Modified Intelligent Algorithms [Volume 17, Issue 6, 2017, Pages 59-66]
Nazari, Aref Bladed Disk Nodal Diameter Extraction by Numerical and Experimental Methods [Volume 17, Issue 2, 2017, Pages 343-349]
Nazari, Farshad Uncertainty analysis of contour method in the hot extruded Aluminum specimens [Volume 17, Issue 5, 2017, Pages 439-445]
Nazari, Mohammad Ali Finite element modeling of avascular tumor growth focusing on the constitutive model [Volume 17, Issue 3, 2017, Pages 115-122]
Nazari, Mohammad Bagher Extended Finite Element analysis of a stationary crack in hygrothermal isotropic media subjected to thermal shock [Volume 17, Issue 1, 2017, Pages 56-66]
Nazari, Mohammad Reza Numerical Simulation of the Unsteady Wake Flow around a Marine Propeller Using URANS Model [Volume 17, Issue 9, 2017, Pages 175-184]
Nazari, Mohammad Reza Numerical simulation of the characteristic chart and the steady state wake flow past a marine propeller using OpenFOAM [Volume 17, Issue 9, 2017, Pages 290-300]
Nazari Berenjkoob, Mehdi Hydrodynamics of restrained buoy with an approach to wave energy absorption enhancement [Volume 17, Issue 5, 2017, Pages 129-137]
Nazif, Hamid Reza A novel semi analytical solution for the dynamic and heat transfer analysis of Stagnation Point Flow using BK-HAM Method [Volume 17, Issue 3, 2017, Pages 270-280]
Nejat, Amir Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
Nejat, Amir Numerical Investigation of Fluid Flow and Hemolysis in Axial and Centrifugal Pump as Left Ventricular Assist Device (LVAD) [Volume 17, Issue 3, 2017, Pages 135-142]
Nejat, Amir Development of implicit Algorithm for High-order discontinuous Galerkin methods to solve compressible flows using Newton-Krylov methods [Volume 17, Issue 3, 2017, Pages 281-292]
Nejati, Mahdi A Comprehensive Model to Compute Incompressible-Subsonic Compressible Unsteady Aerodynamic Loads using Indicial Functions [Volume 17, Issue 1, 2017, Pages 353-364]
Nejat Pishkenari, Hossein Development of Coarse-Graining Methods for Modeling of Silicon Nanostructures [Volume 17, Issue 4, 2017, Pages 267-276]
Nezamoleslami, Reza Analysis of linear vibrational behavior of anisogrid lattice composite conical shells formed by helical ribs [Volume 17, Issue 3, 2017, Pages 251-262]
Niazmand, Hamid The Influence of Random Vortices on the Heat Transfer Rate from a Spherical Particle [Volume 17, Issue 3, 2017, Pages 93-104]
Niazmand, Hamid A numerical and entropy analysis of viscous micropump with an elliptic rotor by LBM and micropump optimization by RSM [Volume 17, Issue 3, 2017, Pages 343-354]
Niazmand, Hamid Effect of inter-particle mass transfer resistance on the performance parameters of an adsorption chiller with finned flat-tube heat exchanger [Volume 17, Issue 3, 2017, Pages 414-424]
Niazmand, Hamid Geometry and Zeta Potential Effects on Electroosmotic Mixing in Converging (Diverging) Microchannel using Lattice Boltzmann Method [Volume 17, Issue 6, 2017, Pages 331-341]
Niazmand, Hamid A numerical analysis of an active micromixer with the oscillating stirrer at the different aspect ratios by LBM [Volume 17, Issue 9, 2017, Pages 417-426]
Niazmand, Hamid Ionic size effects on combined electrokinetic and pressure driven flow of Power-law fluids [Volume 17, Issue 11, 2018, Pages 77-88]
Nikbakht, Shapor Study of Microstructure and mechanical properties of pure commercial titanium via combination of Equal channel angular pressing and Extrusion [Volume 17, Issue 1, 2017, Pages 453-461]
Nikkhah, Amirali Optimal Multiple-Burn Injection of a Satellite into Geostationary orbit Using an Upper Stage [Volume 17, Issue 6, 2017, Pages 157-167]
Niknejad, Abbas Experimental, numerical and theoretical analysis of energy absorption process by aluminum profile with H-shaped thin-walled cross section [Volume 17, Issue 8, 2017, Pages 213-223]
Nikoei, Sajjad Static and free vibration isogeometric analysis of laminated composite plates integrated with piezoelectric using ReissnerâMindlin theory [Volume 17, Issue 11, 2018, Pages 181-191]
Nikoo Hemmat, Mohammad Mehdi Effects of chord length, blade pitch angle on hydro kinetic turbineâs power coefficient [Volume 17, Issue 6, 2017, Pages 51-58]
Nikravan, Ayyoub A framework for developing an FPGA based coprocessor for accelerating numerical computations [Volume 17, Issue 10, 2018, Pages 58-64]
Nodeh Farahani, Mohammad Hossein Stress Analysis and Design Improvements of Rotating Drilling Pipe Tool Joints by Fatigue approach [Volume 17, Issue 7, 2017, Pages 405-412]
Noori Dabir, Mahdi Model Predictive and Adaptive Controller Design of Tri-Tilt Rotor VTOL UAV by Using Multi-Body Modeling [Volume 17, Issue 6, 2017, Pages 179-189]
Norouzi, Ashkan Modeling, development, and evaluation of a micro-robot equipped with vibratory actuator [Volume 17, Issue 8, 2017, Pages 413-422]
Norouzi, Mahmood An analytical investigation on shape of a falling viscose drop at low Reynolds number [Volume 17, Issue 2, 2017, Pages 251-262]
Norouzi, Mahmood Investigation of inertial force effects on the heat transfer of viscoelastic fluid flow inside expanded planar channel with the symmetric abrupt expansion [Volume 17, Issue 6, 2017, Pages 139-148]
Norouzi, Mahmood Study of the effect of elastic properties on non-Newtonian drop motion in inertia regime [Volume 17, Issue 9, 2017, Pages 165-174]
Norouzi, Mahmood An experimental investigation on viscous fingering instability of Newtonian fluid in transparent porous media with compact structure consist of glass beads [Volume 17, Issue 9, 2017, Pages 245-253]
Norouzi, Mahmood Numerical study of three dimensional instability of nonlinear viscoelastic fluid flow around a sphere [Volume 17, Issue 12, 2018, Pages 213-222]
Norouzi, Rouhollah Design and Implementation of a Neural Intelligent Controller and a Hybrid PD Controller for Quadrotor [Volume 17, Issue 10, 2018, Pages 194-204]
Norouzifard, Vahid A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2018, Pages 312-320]
Nourazar, Salman Free and forced convectional heat transfer analysis of rectangular porous fin with Differential transformation method [Volume 17, Issue 6, 2017, Pages 393-400]
Nourazar, Salman Experimental Study of Effective Factors on Liquid Jet Trajectory and Breakup in Gaseous Crossflow [Volume 17, Issue 12, 2018, Pages 354-360]
Nourbakhsh, Ahmad The evaluation of friction models to calculate the flow rate in pressure-time method [Volume 17, Issue 8, 2017, Pages 360-368]
Nourbakhsh, Seyyed Ahmad Numerical Investigation of Fluid Flow and Hemolysis in Axial and Centrifugal Pump as Left Ventricular Assist Device (LVAD) [Volume 17, Issue 3, 2017, Pages 135-142]
Nouri, Reza Uncertainty quantification of electroosmotic flow in a microchannel [Volume 17, Issue 8, 2017, Pages 291-300]
Nourian, Amin Analytical dynamic of a rotating prismatic actuator with variable stiffness and validation with finite element method [Volume 17, Issue 3, 2017, Pages 79-86]
Nourouzi, Salman Investigation on microstructure and wear resistance of in-situ composites coating product by gas tungsten arc welding on 304 stainless steel [Volume 17, Issue 5, 2017, Pages 119-128]
Nourpour, Leila The Modification of the Conventional Genetic Algorithm for Solving Inverse Heat Transfer Problems [Volume 17, Issue 11, 2018, Pages 408-418]
O
Oftadeh, Yusef The investigation of the effects of Dimensionâs and Moldâs Temperature on Bistability of PVC/Glass Fiber composites [Volume 17, Issue 4, 2017, Pages 161-167]
Oghabneshin, Yaser Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
Olyaei, Ghader Design and numerical analysis of Mach 3.0 inlet [Volume 17, Issue 4, 2017, Pages 199-208]
Olyaei, Ghader Effect of thick boundary layer ingestion on the performance of hypersonic inlet [Volume 17, Issue 10, 2018, Pages 73-80]
Omid, Mahmoud Intelligent fault diagnosis of cooling radiator based on thermal image processing and artificial intelligence techniques [Volume 17, Issue 2, 2017, Pages 240-250]
OmidDezyani, Soroush Vibration analysis of a microplate in contact with a fluid based on the modified couple stress theory [Volume 17, Issue 2, 2017, Pages 47-57]
Omidpanah, Mohammad Combined radiative-convective inverse design problem in a 2-D channel filled with radiating gases [Volume 17, Issue 4, 2017, Pages 117-124]
Omidvar, Pourya Investigation of convection-diffusion process in a two-phase air-water flow using Smoothed Particle Hydrodynamics [Volume 17, Issue 2, 2017, Pages 115-125]
Ommi, Fathollah Investigation of optimized body tilt angle and acoustic excitation affecting performance of hydro cyclone particles separator based on genetic algorithm [Volume 17, Issue 3, 2017, Pages 37-46]
Ommi, Fathollah Accuracy Evaluation of Semi-empirical and Numerical Methods in Estimation of Aerodynamic Coefficients for air-launch-to-orbit delta wing [Volume 17, Issue 9, 2017, Pages 237-244]
Ommi, Fathollah Experimental Study of Effective Factors on Liquid Jet Trajectory and Breakup in Gaseous Crossflow [Volume 17, Issue 12, 2018, Pages 354-360]
Orui, hossein Numerical study of delamination in drilling of Glass/Polyester and investigation of mode ÎÎ fracture contribution [Volume 17, Issue 8, 2017, Pages 173-181]
P
Pakdaman, Mohammad An experimental investigation into warm deep drawing process on PVC/fiberglass composite laminates [Volume 17, Issue 10, 2018, Pages 129-138]
Panahdoost, Hassan MHD flow of a nanofluid inside a peristaltic curved porous channel with internal heat source [Volume 17, Issue 10, 2018, Pages 165-175]
Panahi, Hamed Feedback control of temperature distribution in a thick rectangular functionally graded plate [Volume 17, Issue 8, 2017, Pages 97-104]
Panahpoori, Ebrahim Investigation of tube drawing with fixed plug process parameters through presenting a modified slab analysis with finite element verification [Volume 17, Issue 1, 2017, Pages 203-209]
Parhizkar, Niloofar Comparison of Back Stepping Optimized via PSO Algorithm and LQR Controllers for a Quadrotor [Volume 17, Issue 7, 2017, Pages 413-420]
Parivar, Amirhossein The Effect of Injector Angle and Start of Injection on Spray-Wall Interaction in Gasoline Direct Injection Engine [Volume 17, Issue 1, 2017, Pages 95-105]
Parivar, Amir Hossein Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
Parsa, Ashkan Design of Robust H_â Control for Stabilizing of Stratospheric Airship with Parametric Uncertainty and External Disturbance [Volume 17, Issue 3, 2017, Pages 216-226]
Parvar, Saeed Simulation of compressible multimaterial flow by 2D hydrodynamic code [Volume 17, Issue 2, 2017, Pages 211-220]
Parvizi, Ali Investigation of tube drawing with fixed plug process parameters through presenting a modified slab analysis with finite element verification [Volume 17, Issue 1, 2017, Pages 203-209]
Parvizi, Ali Slab analysis of front and back tensions effects on decreasing force and pressure in asymmetrical rolling process of unbonded clad sheet [Volume 17, Issue 7, 2017, Pages 431-440]
Pasandideh-Fard, Mohammad Numerical study of the performance of an oscillating wave surge converter using volume of fluid method [Volume 17, Issue 6, 2017, Pages 265-276]
Pasdarshahri, Hadi Developing a pyrolysis model for numerical simulation of thermal decomposition in combustible solid [Volume 17, Issue 1, 2017, Pages 86-94]
Pashaie, Pouya Analysis of dimensional errors for metallic bipolar plates in single PEM fuel cell [Volume 17, Issue 9, 2017, Pages 55-64]
Pashna, Meisam A Comparison between finite element and separation of variables method in investigating frequency behavior of Bimorph piezoelectric beam [Volume 17, Issue 5, 2017, Pages 31-40]
Passandideh Fard, Mahmoud Continuous adjoint-based shape optimization for low reynolds number oscillating airfoils in turbulent flow on unstructured grids [Volume 17, Issue 7, 2017, Pages 161-170]
Passandideh-Fard, Mohammad A new method to reach high-density ratios and low viscosities based on the Shan-Chen multiphase model in lattice Boltzmann method [Volume 17, Issue 9, 2017, Pages 145-152]
Passandideh-Fard, Mohammad Parametric Analysis of a Nanofluid Based Photovoltaic Thermal System, Using Computational Fluid Dynamic [Volume 17, Issue 9, 2017, Pages 195-204]
Passandideh-Fard, Mohammad Numerical and Experimental Investigation of Optimization of Photovoltaic Thermal System, Using Taguchi Method [Volume 17, Issue 8, 2017, Pages 75-86]
Passandideh-Fard, Mohammad Experimental Investigation of Using Water and Ethylene Glycol as Coolants in a Photovoltaic Thermal System [Volume 17, Issue 11, 2018, Pages 12-20]
Payandeh, Yousef Theoretical, numerical and experimental analysis of a planar wobble motor driven by shape memory alloy (SMA)wires [Volume 17, Issue 6, 2017, Pages 401-412]
Payghaneh, Gholamhasan Resonance analysis and free nonlinear vibrations of a nanocomposite with internal damping [Volume 17, Issue 12, 2018, Pages 98-104]
Pilehchian, Mohammad Reza Investigation of the effects of flapping fin on a supersonic parachute performance [Volume 17, Issue 5, 2017, Pages 295-304]
Pirali, Pooya Numerical investigation of the damaged area of GLARE® under oblique impact of the AP projectile with medium caliber [Volume 17, Issue 3, 2017, Pages 367-375]
Pirmoradian, Mostafa Nonlinear Effects on Parametric Resonance of a Beam Subjected to Periodic Mass Transition [Volume 17, Issue 1, 2017, Pages 284-292]
Pirmoradian, Mostafa Occurrence of parametric resonance in vibrations of rectangular plates resting on elastic foundation under passage of continuous series of moving masses [Volume 17, Issue 9, 2017, Pages 225-236]
Pishevar, Ahmad Reza Study the effect of conservative force size and type on particles radios in Dissipative Particle Dynamics method [Volume 17, Issue 10, 2018, Pages 249-258]
Pol, Mohammadhossein Improving shear strength in nanocomposites through electrophoretic deposition of carbon nanotubes [Volume 17, Issue 1, 2017, Pages 462-472]
Pol, Mohammad Hossein Analytical study the ballistic behavior of thin laminated composite plates based on tsai-hill and maximum strain criterions [Volume 17, Issue 6, 2017, Pages 41-50]
Poshtan, Javad Comparison of wavelet packet based Hilbert transform and improved Hilbert-Huang transform in fault detection of broken rotor bar [Volume 17, Issue 5, 2017, Pages 95-102]
Pouraminaei, Amid Thermo-mechanical behavior of polymer composites exposed to fire [Volume 17, Issue 9, 2017, Pages 86-96]
Pouranvari, Majid Influence of heat-input on mechanical behavior and phase balance of 2304 duplex stainless steel resistance spot welds [Volume 17, Issue 5, 2017, Pages 159-165]
Pouresmaeil, Salman A Weakly Coupled Scheme for Modelling Bedload Sediment Transport Using an Augmented Riemann Solver [Volume 17, Issue 9, 2017, Pages 409-416]
Pourfatemi, Seyyed Muhammad Thermo-economic analysis with reliability consideration of a hybrid system of Gas Turbine, SOFC and Multiple Effect Desalination [Volume 17, Issue 10, 2018, Pages 321-332]
Pourhoseini, Seyed Hadi Comparison of effects of adding various carbon nanotube concentrations and increase C/H mass ratio of liquid fuels on combustion behavior and flame thermal radiation [Volume 17, Issue 9, 2017, Pages 205-213]
Pourjafargholi, Mohammad Numerical simulation of the effect of the geometry and boundary conditions on Supersonic flow in 2D MHD channel . [Volume 17, Issue 8, 2017, Pages 301-312]
Pourmoayed, Alireza buckling and Vibration analysis of a thick cylindrical sandwich panel with flexible core using an improved high-order theory [Volume 17, Issue 3, 2017, Pages 227-238]
Pouryoussefi, Gholamhosein Optimization of the Ratio of Induced Flow Velocity to Electrical Power Consumption in the DBD Plasma Actuator Using Artificial Neural Network and Genetic Algorithm [Volume 17, Issue 11, 2018, Pages 323-332]
Pouryoussefi, Gholamhosein Experimental Study of Flow Control Over an Ahmed Body Using Plasma Actuator [Volume 17, Issue 12, 2018, Pages 523-530]
Q
Qaderi, Alireza Investigation of non-Newtonian fluid mixing in combined electroosmotic/pressure driven flows inside nonhomogeneous microchannel with rectangular obstacles [Volume 17, Issue 4, 2017, Pages 331-340]
R
Rabani, Reza The effect of wall force field on temperature distribution in nanochannel contains Lennard-Jones fluid by molecular dynamic simulation [Volume 17, Issue 6, 2017, Pages 23-31]
Rabiee, Sayed Mahmood Investigation of the mechanical properties of the porous scaffolds used in bone tissue engineering by means of micromechanical modeling [Volume 17, Issue 9, 2017, Pages 397-408]
Rabiei, Farshad Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic assisted grinding [Volume 17, Issue 5, 2017, Pages 305-315]
Rabienataj Darzi, AhmadAli Flow Control via Co-Flow Jet over Clark-Y Airfoil [Volume 17, Issue 2, 2017, Pages 147-156]
Raeesi, Mohammad Cooling performance evaluation of overhead mixing and floor displacement ventilation systems inside a bus by using 65-nodes thermal comfort model [Volume 17, Issue 2, 2017, Pages 333-342]
Rafee, Roohollah Effects of convergence of the superhydrophobic walls on the performance of microchannels as heat sinks [Volume 17, Issue 7, 2017, Pages 49-58]
Rafeeyan, Mansoor Dynamic Modeling and Experimental Evaluation of the Power Loss of a Rotating System with the Angular Misalignment and Unbalancing Faults [Volume 17, Issue 4, 2017, Pages 237-246]
Rafiee, Roham Extension of Maximum Tensile Stress Criterion to Mixed Mode Fracture of Orthotropic Materials Considering T-stress [Volume 17, Issue 10, 2018, Pages 292-300]
Raghebi, Mehdi Experimental and numerical investigation on interlayer pressure at bimetallic Copper clad Aluminum wire drawing [Volume 17, Issue 1, 2017, Pages 253-262]
Rahbar, Mohammad Comparison between empirical mode decomposition and wavelet transform for unbalance detection on rotating machinery using optimized support vector machine [Volume 17, Issue 2, 2017, Pages 325-332]
Raheli, Amir Dynamic analysis of a micro beam based on sub-harmonic parametric excitation [Volume 17, Issue 5, 2017, Pages 374-384]
Rahimi, Abdolreza Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic assisted grinding [Volume 17, Issue 5, 2017, Pages 305-315]
Rahimi, G. H. Experimental and numerical investigation of the free vibration of composite sandwich plates with lattice cores [Volume 17, Issue 10, 2018, Pages 1-8]
Rahimi, G. H. Buckling analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method (GDQM) [Volume 17, Issue 11, 2018, Pages 385-396]
Rahimi, Gholam Hossein The use of the differential quadrature method in the analysis of composite metal cylindrical vessel under dynamical load [Volume 17, Issue 6, 2017, Pages 319-330]
Rahimi, Gholam Hossein The effect of geometrical imperfection on the axial buckling of unstiffened and stiffened composite cylinders with and without cutout [Volume 17, Issue 7, 2017, Pages 245-256]
Rahimi, Masoud Investigation of non-Newtonian fluid mixing in combined electroosmotic/pressure driven flows inside nonhomogeneous microchannel with rectangular obstacles [Volume 17, Issue 4, 2017, Pages 331-340]
Rahimpour, Esmaeel A Hyper-Viscoelastic Model for an Individual Stem Cell Subjected to Cyclic Loading for Mechanical Modulation toward Differentiating to Fibrochondrocytes [Volume 17, Issue 7, 2017, Pages 207-216]
Rahimzadeh, Hassan Experimental investigation of dynamics of the air-core vortices and estimating the air entrainment rate at a horizontal intake [Volume 17, Issue 8, 2017, Pages 59-67]
Rahmani, Behrooz Feedback control of temperature distribution in a thick rectangular functionally graded plate [Volume 17, Issue 8, 2017, Pages 97-104]
Rahmani, Zahra Energy management in order to reduce fuel consumption for parallel Plug-in Hybrid Electric vehicles based on fuzzy predictive control [Volume 17, Issue 5, 2017, Pages 353-362]
Rahmani, Zahra Designing backstepping controller for positionforce tracking of cooperative robot manipulators [Volume 17, Issue 9, 2017, Pages 45-54]
Rahmanian, Shahaboddin Design of an Hâ-PID Controller for an UAV Auto-Landing System Based on External Navigation [Volume 17, Issue 11, 2018, Pages 89-96]
Rahmani Hanzaki, Ali Design of decision-making lane change algorithm of truck-semitrailer in real dynamic environment [Volume 17, Issue 9, 2017, Pages 351-360]
Rahman Nezhad, Javad Numerical simulation of free convection around a stationary cylinder with constant heat flux and different diagonal locations using IB-LBM [Volume 17, Issue 4, 2017, Pages 419-430]
Rahmatabadi, Davood Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
Rahmatabadi, Davood Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test [Volume 17, Issue 3, 2017, Pages 451-454]
Rahmatabadi, Davood Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
Rahmatabadi, Davood Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process [Volume 17, Issue 7, 2017, Pages 180-184]
Rahmati, Seyed Mohammad Ali Walking Path Prevision of Biped Robot along with Stability and Optimization of Power Consumption in a Single Support Phase [Volume 17, Issue 11, 2018, Pages 1-11]
Rahnama, Saeed Experimental and numerical investigation on interlayer pressure at bimetallic Copper clad Aluminum wire drawing [Volume 17, Issue 1, 2017, Pages 253-262]
Raisee, Mehrdad Prediction of fluid flow through U-bend channels using linear and nonlinear models of turbulence. [Volume 17, Issue 6, 2017, Pages 423-432]
Raisee, Mehrdad Uncertainty quantification of electroosmotic flow in a microchannel [Volume 17, Issue 8, 2017, Pages 291-300]
Raisee, Mehrdad The evaluation of friction models to calculate the flow rate in pressure-time method [Volume 17, Issue 8, 2017, Pages 360-368]
Rajabi Vandechali, Majid Multiple linear regression analysis of some important performance parameters of a conventional diesel engine in different working conditions [Volume 17, Issue 5, 2017, Pages 363-373]
Rajaei, Hamid Extended Finite Element analysis of a stationary crack in hygrothermal isotropic media subjected to thermal shock [Volume 17, Issue 1, 2017, Pages 56-66]
Ramezani Parsa, Armin Influence of pre strain shape memory alloy wire on impact properties of smart fibers metal composite [Volume 17, Issue 4, 2017, Pages 322-330]
Ramezanizadeh, Mahdi Aeroacoustic Investigation of Flow over the Diamond, Cropped and Cranked Arrow Delta Wings Using Large Eddy Simulation Approach [Volume 17, Issue 5, 2017, Pages 430-438]
RamezanShams, AmirHossein Design, fabricate and testing the novel Magnetorheologic damper involving stabilizer nanoparticles of silicone [Volume 17, Issue 8, 2017, Pages 252-258]
Ramiar, Abas Numerical investigation of symmetry and asymmetry rigid wedge slamming using OpenFOAM code [Volume 17, Issue 7, 2017, Pages 343-352]
Ranjbar, Mehdi Low velocity impact analysis of functionally graded ceramic-metal beam in simply and clamped supported boundary conditions [Volume 17, Issue 10, 2018, Pages 112-122]
Ranjbar, Mehdi Investigation and simulation of geometric and optical quality for bi-convex lens produced by injection molding process [Volume 17, Issue 12, 2018, Pages 21-32]
Raoof, Amir Pore Scale Modelling of Cathode Catalyst Layer of PEM Fuel Cell to Investigate the Tortuosity and Effective Diffusivity [Volume 17, Issue 2, 2017, Pages 10-18]
Raoofian, Ali A Modification in the Decoupled Natural Orthogonal Complement Method, Using Virtual Spring Concepts [Volume 17, Issue 6, 2017, Pages 377-384]
Rashed, Gholamreza Effect of Angel of the Crack Axial on Shape of Crack Tip Plastic Zone for Orthotropic Materials under Various Loading Conditions [Volume 17, Issue 11, 2018, Pages 199-209]
Rashidizad, Hossein Point-cloud lossless compression new algorithm by merging gray-coded structured light series patterns and compression of two-dimensional single channel matrix [Volume 17, Issue 11, 2018, Pages 371-379]
Rastegari, Rambod Deriving equations of motion of a wheeled mobile robot and its control using extended multiple impedance strategy [Volume 17, Issue 5, 2017, Pages 394-404]
Rasti, Amir Study of microhardness variations in hole making processes on 4340 steel [Volume 17, Issue 1, 2017, Pages 423-430]
Rasti, Amir Stress Analysis and Design Improvements of Rotating Drilling Pipe Tool Joints by Fatigue approach [Volume 17, Issue 7, 2017, Pages 405-412]
Rasti, Amir [Volume 17, Issue 10, 2018, Pages 420-428]
Rasti, Mahmood Structural study of agglomerate model of the cathode catalyst layer and comparison with the homogeneous model in the PEM fuel cell [Volume 17, Issue 5, 2017, Pages 243-252]
Razavi, Seyed Aliakbar Optimization of Planar Low-Thrust Orbit Transfer Maneuver via Fuzzy Optimal Control Approach [Volume 17, Issue 1, 2017, Pages 1-10]
Rezaee, Mousa Investigating the nonlinear behavior and stability analysis of the automatic ball balancer by the multiple scales method [Volume 17, Issue 4, 2017, Pages 188-198]
Rezaee, Mousa Vibration Characteristics of Fluid-Conveying Pipes in presence of a Dynamic Vibration Absorber [Volume 17, Issue 7, 2017, Pages 31-38]
Rezaeepazhand, Jalil A Numerical study of failure modes of a composite plate subjected to hail ice impact [Volume 17, Issue 12, 2018, Pages 77-86]
Rezaei, Hamed An Experimental study into the size effect in micromilling process [Volume 17, Issue 10, 2018, Pages 242-248]
Rezaei, Mohammad Numerical simulation of shear thickening fluid impregnated polypropylene fabric and comparing with experimental results [Volume 17, Issue 2, 2017, Pages 221-230]
Rezaei, Seyed Mehdi Real-time estimation of micro-milling cutting tool deflections by using signals of stages driven by linear motors [Volume 17, Issue 6, 2017, Pages 357-364]
Rezaei, Vahid Dynamic analysis of flexible robotic manipulators constructed of functionally graded materials [Volume 17, Issue 12, 2018, Pages 145-156]
Rezaei Firozjaee, Mohammad A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2018, Pages 312-320]
Rezazadeh, Ghader A study on the size-dependent behavior of electrostatic microbeams immersed in incompressible fluid [Volume 17, Issue 1, 2017, Pages 185-192]
Rezazadeh, Ghader A study of fluid media and size effect on dynamic response of microplate [Volume 17, Issue 9, 2017, Pages 153-164]
Rezazadeh, Ghader A Study on the Nonlinear Vibrations of Electrostatically Actuated Micro Beams with Anelastic Stress-Strain Behavior [Volume 17, Issue 7, 2017, Pages 197-206]
Rezvandoost, Mustafa Design of Spike Nozzle and Comparison of Turbulence Models in Numerical Simulation of its Flow-field in Design and Off-design Conditions [Volume 17, Issue 6, 2017, Pages 190-200]
Riahi, Mohammad Simulation and impedance control of the grasping of a spherical object with soft contact surfaces [Volume 17, Issue 7, 2017, Pages 9-19]
Riasi, Alireza Numerical Analysis on the Effects of Impeller Geometry Parameters for a Centrifugal Pump in Reverse Operation [Volume 17, Issue 9, 2017, Pages 13-24]
Rohani, Abbas Multiple linear regression analysis of some important performance parameters of a conventional diesel engine in different working conditions [Volume 17, Issue 5, 2017, Pages 363-373]
Roohi, Ehsan Evaluating modulated gradient model in computing subgrid scale tensors [Volume 17, Issue 7, 2017, Pages 283-294]
Roohi, Ehsan Implementation of the anisotropic minimum-dissipation (AMD) sub-grid scale model in OpenFOAM and its evaluation in treating turbulent channel flow [Volume 17, Issue 12, 2018, Pages 478-484]
Roozbahani, Mohammad Hosein Investigation of the Tracheobronchial Cartilages Effect on the Respiration by hybrid RANS-LES Approach [Volume 17, Issue 6, 2017, Pages 201-2012]
Roshan, Fatemeh Numerical simulation of a near-shore rotating wave energy converter [Volume 17, Issue 1, 2017, Pages 75-85]
Roshandel, Ramin Multi objective optimization and statistic sensitivity analysis of solid oxide fuel cell-gas turbine hybrid system fed by biogas in urban wastewater treatment plants [Volume 17, Issue 3, 2017, Pages 239-250]
Roshanian, Jafar Multi-Objective Multidisciplinary Design Optimization of a General Aviation Aircraft [Volume 17, Issue 2, 2017, Pages 199-210]
Roshanian, Jafar Optimal Multiple-Burn Injection of a Satellite into Geostationary orbit Using an Upper Stage [Volume 17, Issue 6, 2017, Pages 157-167]
Roshanian, Jafar Continuous maneuver of unmanned aerial vehicle using High Order Expansions method for optimal control problem [Volume 17, Issue 12, 2018, Pages 382-390]
Rostami, Peyman Numerical simulation of upward co-current gas-liquid two-phase flow in the vertical pipes of large diameter, by volume of fluid method [Volume 17, Issue 1, 2017, Pages 441-452]
Rostamian, Rohollah Effect of pull-winding process in thermoplastic composite rod on the impregnation of glass fiber [Volume 17, Issue 3, 2017, Pages 405-413]
Rostami Najafabadi, Hossein An investigation on effectiveness of dimension on Magnetic Shape Memory Alloy based energy harvester with two different configurations [Volume 17, Issue 1, 2017, Pages 136-144]
S
Saadat, Abbas Effect of stand-off distance and the explosive ratio parameters on the properties of explosively bonded copper-aluminum-copper [Volume 17, Issue 1, 2017, Pages 39-46]
Saadat Foumani, Mahmoud Multilevel Modeling of an Unmanned Rotorcraft and Robust Controller Design for Trajectory Tracking [Volume 17, Issue 8, 2017, Pages 388-398]
Sabbaghian Bidgoli, Farzaneh Comparison of wavelet packet based Hilbert transform and improved Hilbert-Huang transform in fault detection of broken rotor bar [Volume 17, Issue 5, 2017, Pages 95-102]
Sabbaghi Farshi, Sina Study of microhardness variations in hole making processes on 4340 steel [Volume 17, Issue 1, 2017, Pages 423-430]
Saber, Mohammad Reza Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
Saberi, Hazhir A finite element viscoelastic model based on consecutive transverse ultrasound images of carotid artery [Volume 17, Issue 7, 2017, Pages 421-430]
Saberi, Saeed Behaviour analysis of a bistable twisting hybrid composite plate with an external metal layer and effecting factors on stability region [Volume 17, Issue 2, 2017, Pages 420-426]
Saberinejad, Hojjat Numerical investigation of reciprocating flow in a shell and tube heat exchanger used as a cooler in gamma Stirling engine [Volume 17, Issue 10, 2018, Pages 359-366]
Sabetghadam, Fereidoun Using the Method of Inverse Problems in Implementing the Solid Immersed Boundaries on Vorticity-Streamfunction Formulation of the Incompressible Viscous Fluid Flow [Volume 17, Issue 10, 2018, Pages 397-404]
Sabouri, Hadi Experimental study of projectiles with flat, conical and hemispherical nose shapes on low velocity impact on GLARE 3 [Volume 17, Issue 7, 2017, Pages 109-118]
Sabouri, Hadi Failure Mode Characterization and Dominant Mode Determination in Progressive Damage Due to High Velocity Impact on Woven Composite Laminates [Volume 17, Issue 8, 2017, Pages 313-322]
Sabzehparvar, Mehdi Nonlinear Estimation of Flight Mode characteristics in Spin Maneuver by using Empirical Mode Decomposition Algorithm and Hilbert Transform [Volume 17, Issue 1, 2017, Pages 322-332]
Sadati, Seyed Hossein Analytical and Numerical Analysis of Chaos in Attitude Dynamics of a Satellite in an Elliptic Orbit [Volume 17, Issue 7, 2017, Pages 236-244]
Saddighi, Saddegh Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers [Volume 17, Issue 3, 2017, Pages 425-436]
Sadeghi, Mehdi An experimental and simulation study of flow balance in multi-cavity plastic injection molds [Volume 17, Issue 4, 2017, Pages 285-289]
Sadeghi, Mohammad Hossein Study of microhardness variations in hole making processes on 4340 steel [Volume 17, Issue 1, 2017, Pages 423-430]
Sadeghi, Mohammad Hossein Stress Analysis and Design Improvements of Rotating Drilling Pipe Tool Joints by Fatigue approach [Volume 17, Issue 7, 2017, Pages 405-412]
Sadeghi, Mohammad Hossein An Experimental study into the size effect in micromilling process [Volume 17, Issue 10, 2018, Pages 242-248]
Sadeghian, Farshid Design and Analysis of a knee-ankle-foot orthosis using torsional spring [Volume 17, Issue 10, 2018, Pages 185-193]
Sadeghian, Hamid Hierarchical Position, Orientation and Impedance Control in redundant robots [Volume 17, Issue 8, 2017, Pages 117-125]
Sadeghian, Hesam Development of a new Method for Experimental Dielectrophoresis Force Measurement in the Microfluidic Cell Sorting Actuators [Volume 17, Issue 3, 2017, Pages 150-158]
Sadeghnejad, Soroush Walking Path Prevision of Biped Robot along with Stability and Optimization of Power Consumption in a Single Support Phase [Volume 17, Issue 11, 2018, Pages 1-11]
Sadegh yazdi, Milad Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method [Volume 17, Issue 11, 2018, Pages 311-322]
Sadegh Yazdi, Milad Investigation of Wrinkling in Hydrodynamic Deep Drawing assisted by Radial Pressure with Inward Flowing Liquid Based on a Geometric Method [Volume 17, Issue 5, 2017, Pages 276-286]
Saeedan, Mohammad Numerical evaluation of engine performance and emission characteristics of rapeseed oil and its blends in diesel engines [Volume 17, Issue 4, 2017, Pages 277-284]
Saeedi, Behzad Nonlinear dynamic analysis of an atomic force microscope submerged in liquid based on strain gradient theory [Volume 17, Issue 12, 2018, Pages 275-285]
Saeedi, Mohammad Hassan Numerical evaluation of engine performance and emission characteristics of rapeseed oil and its blends in diesel engines [Volume 17, Issue 4, 2017, Pages 277-284]
SAEMI, SIMINDOKHT The evaluation of friction models to calculate the flow rate in pressure-time method [Volume 17, Issue 8, 2017, Pages 360-368]
Safa, Mahdi Bladed Disk Nodal Diameter Extraction by Numerical and Experimental Methods [Volume 17, Issue 2, 2017, Pages 343-349]
Safaei, Hadi Effect of initial impact velocity on dynamics and shape of formed splats of hollow droplets in thermal plasma spraying [Volume 17, Issue 2, 2017, Pages 295-305]
Safaei, Hadi Numerical comparison between the impact of a completely molten and a semi-molten hollow droplet on a surface [Volume 17, Issue 8, 2017, Pages 267-278]
Safari, Mehdi Experimental and Numerical Study on Effects of Process Parameters on Working Zone in Hydro-mechanical Deep Drawing of Two-layer Conical Parts [Volume 17, Issue 3, 2017, Pages 72-78]
Safari, Mehdi Experimental investigation of butt weld friction stir welding of IF steel with thickness of 0.7 mm [Volume 17, Issue 5, 2017, Pages 69-76]
Safarinejad, MohammadReza Investigating Stress Urinary Incontinence in Women Using Computational Methods and Clinical Data [Volume 17, Issue 5, 2017, Pages 419-429]
Safarinezhad, Arsham Numerical simulation of a near-shore rotating wave energy converter [Volume 17, Issue 1, 2017, Pages 75-85]
Safarzarzadeh, Habibollah Numerical modeling of magnetic nanofluid pumping in a closed cooling loop by using magnetic field and thermomagnetic effect [Volume 17, Issue 11, 2018, Pages 109-117]
Safavinejad, Ali Two-Objective Optimization of Aerodynamic Shapes Using Gravitational Search Algorithm [Volume 17, Issue 5, 2017, Pages 211-220]
Safehian, Javad The Novel Control Method for Voice Coil Actuator Fatigue Testing Machine [Volume 17, Issue 7, 2017, Pages 79-90]
Safehian, Javad Trajectory design of harmonic loading machine input by central pattern generator [Volume 17, Issue 12, 2018, Pages 423-434]
Saffari, Hamid A numerical analysis of dropwise condensation of nanofluid on an inclined plate [Volume 17, Issue 3, 2017, Pages 105-114]
Safikhani Nasim, Mohsen Analysis of effective parameters of auxetic composite structure made with multilayer orthogonal reinforcement by finite element method [Volume 17, Issue 4, 2017, Pages 247-254]
Sahebifard, Mohammad Mahdi Investigation of spontaneous curvature and membrane initial configuration on shape evolution of two-component vesicle [Volume 17, Issue 4, 2017, Pages 9-16]
Sajadi, Morteza High-Gain Observers for a Class of Nonlinear Systems with Simultaneous and Different Delay at State, Input and Output [Volume 17, Issue 12, 2018, Pages 463-468]
Saki Entezami, Saeed Investigation of ECAR process on the corrosion behavior of pure commercial copper [Volume 17, Issue 10, 2018, Pages 39-46]
Salahshoor, Karim Optimizing the Rate of Penetration (ROP) in Rotary Drilling System by using new Robust Model Predictive Control [Volume 17, Issue 5, 2017, Pages 413-418]
Salari, Ali Numerical and Experimental Investigation of Optimization of Photovoltaic Thermal System, Using Taguchi Method [Volume 17, Issue 8, 2017, Pages 75-86]
Salarieh, Hassan Analytical and Numerical Analysis of Chaos in Attitude Dynamics of a Satellite in an Elliptic Orbit [Volume 17, Issue 7, 2017, Pages 236-244]
Salarieh, Hassan Multilevel Modeling of an Unmanned Rotorcraft and Robust Controller Design for Trajectory Tracking [Volume 17, Issue 8, 2017, Pages 388-398]
Salarieh, Hassan A Novel robust control method for three-link underactuated planar biped robot [Volume 17, Issue 11, 2018, Pages 47-58]
Salavati, Hadi Fracture assessment of specimens weakened by U-notch made of functionally graded materials under mode I loading [Volume 17, Issue 2, 2017, Pages 1-9]
Salehifar, Mohammad Numerical analysis of attack angle effects on 3D supersonic turbulent flow around of blunt body along with opposite jet injection [Volume 17, Issue 3, 2017, Pages 355-366]
Salehi Kolahi, Mohammad Reza Non-linear vibration of curved microbeam under electrostatic actuation by using reduced order model and finite element simulation [Volume 17, Issue 12, 2018, Pages 514-522]
Salehi Mojarrad, Mohammad hashem Nano-mechanical Study of a Bio Nano Actuator Under External Forces [Volume 17, Issue 12, 2018, Pages 457-462]
Salehi Neyshabouri, Seyed Ali Akbar Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
Salehzadeh Nobari, Ali Damage detection in Glass Fiber Reinforced Plastic (GFRP) using neural network based on denoising with different mother wavelets [Volume 17, Issue 7, 2017, Pages 363-372]
Salighe, Soheil Designing virtual vibration absorber with adaptable stiffness for vibrations control under harmonic excitation with noise in time-varying frequency [Volume 17, Issue 7, 2017, Pages 353-362]
Salimi, Mohsen Total site cogeneration and desalination system integration assessment using R-curve [Volume 17, Issue 4, 2017, Pages 225-236]
Salimi Lafmejani, Amir Position Control of a 6-DoF Pneumatic Gough-Stewart Parallel Robot Using Backstepping-Sliding Mode Controller [Volume 17, Issue 10, 2018, Pages 101-111]
Salimipour, Seyed Erfan Trajectory Investigation of a Transonic Spherical Projectile under Hop-Up Mechanism Using Simulation of Turbulent Three-Dimensional Non-Stationary Flow [Volume 17, Issue 9, 2017, Pages 25-35]
Salmani Tehrani, Mehdi Experimental and numerical studying of AL5083 alloy fracture using a cruci-form specimen under biaxial loading [Volume 17, Issue 12, 2018, Pages 391-399]
Samani, Abbas Predicting Nonlinear Behavior of Adipose Tissue Extracellular Matrix Based on Structural Model [Volume 17, Issue 7, 2017, Pages 1-8]
Saraeian, Payam Ultrasonic assisted magnetic abrasive finishing of inner surface of tube [Volume 17, Issue 5, 2017, Pages 103-110]
Sardarabadi, Mohammad Parametric Analysis of a Nanofluid Based Photovoltaic Thermal System, Using Computational Fluid Dynamic [Volume 17, Issue 9, 2017, Pages 195-204]
Sardarabadi, Mohammad Numerical and Experimental Investigation of Optimization of Photovoltaic Thermal System, Using Taguchi Method [Volume 17, Issue 8, 2017, Pages 75-86]
Sardarabadi, Mohammad Experimental Investigation of Using Water and Ethylene Glycol as Coolants in a Photovoltaic Thermal System [Volume 17, Issue 11, 2018, Pages 12-20]
Sari, Amin An experimental investigation on the tensile behavior of epoxy/carbon fibers composites containing anhydride self-healing material [Volume 17, Issue 3, 2017, Pages 336-342]
Sarkardeh, Hamed Experimental investigation of dynamics of the air-core vortices and estimating the air entrainment rate at a horizontal intake [Volume 17, Issue 8, 2017, Pages 59-67]
Sarmast, Sepideh The Effect of Injector Angle and Start of Injection on Spray-Wall Interaction in Gasoline Direct Injection Engine [Volume 17, Issue 1, 2017, Pages 95-105]
Sarmast Sakhvidi, Sepideh Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
Sarparast, Hoda Vibration Analysis of a Laminated Deep Curved Beams Subjected to a Moving Load by Considering the Rotary Inertia and Shear Force [Volume 17, Issue 7, 2017, Pages 141-151]
Sayyaadi, Hassan An investigation on effectiveness of dimension on Magnetic Shape Memory Alloy based energy harvester with two different configurations [Volume 17, Issue 1, 2017, Pages 136-144]
Sayyaadi, Hoseyn Three-dimensional modeling of a dew-point evaporative cooler using a modified boundary condition and considering effects of channelsâ entrance regions [Volume 17, Issue 7, 2017, Pages 68-78]
Sedaghat, Mohammad Hadi Numerical study of three dimensional instability of nonlinear viscoelastic fluid flow around a sphere [Volume 17, Issue 12, 2018, Pages 213-222]
Sedigh, Akram Analytical Investigation of Anode Electrothermal Process in a MPD Thruster [Volume 17, Issue 2, 2017, Pages 77-84]
Sedighi, Korosh Experimental Study of Solar Distillation using PCM and Flow Turbulators [Volume 17, Issue 6, 2017, Pages 117-127]
Sedighi, Mojtaba Static analysis of transversely anisotropic laminates using improved zig-zag theory subjected to sinusoidal load [Volume 17, Issue 4, 2017, Pages 393-398]
Sedighi, Sadegh Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
Sefid, Mohammad Combination of ghost fluid-lattice Boltzmann and refilling methods for simulation of the moving curved boundaries with heat transfer [Volume 17, Issue 2, 2017, Pages 263-274]
Sefidgar, Mostafa Calculation of effective diffusion coefficient of tracer in tumor tissue with microvasculature using inverse method [Volume 17, Issue 10, 2018, Pages 405-410]
Sefidgr, Mostafa Simulation of oxygen pressure and nanoparticle FMISO concentration in tissue by considering a real capillary network [Volume 17, Issue 11, 2018, Pages 125-132]
Seifi, Rahman Effects of the equal channel angular pressing (ECAP) on the fracture and fatigue parameters of Al-6063 alloy [Volume 17, Issue 12, 2018, Pages 345-353]
Selk Ghafari, Ali Identification and Torque Control of Series Elastic Actuator of Lower Limb Extremity Exoskeleton [Volume 17, Issue 8, 2017, Pages 1-8]
Sepah Amiri, Mohammad Reza Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2018, Pages 229-238]
Seyedzamani, Soheil Modeling and System Identification of a reaction wheel with experimental data [Volume 17, Issue 11, 2018, Pages 437-446]
Shabani, Rasool A study on the size-dependent behavior of electrostatic microbeams immersed in incompressible fluid [Volume 17, Issue 1, 2017, Pages 185-192]
Shabani, Rasoul A Study on the Nonlinear Vibrations of Electrostatically Actuated Micro Beams with Anelastic Stress-Strain Behavior [Volume 17, Issue 7, 2017, Pages 197-206]
Shabani Nejad, Hoda Three-dimensional analysis of a porous radiant burner under different operating conditions with combustion modeling [Volume 17, Issue 12, 2018, Pages 105-113]
Shabgard, Mohammadreza Experimental investigation of the influence of tools ultrasonic vibrations and external magnetic field on machining characteristics at EDM process [Volume 17, Issue 12, 2018, Pages 495-504]
Shabgard, Mohammad Reza Study on the effect of gap pressure on the geometric characteristics of the tungsten carbide powder produced by electrical discharge [Volume 17, Issue 9, 2017, Pages 254-260]
Shad, Arash Effects of Fin Presence and change the Aspect Ratio on Natural Convection in Coaxial Annuli [Volume 17, Issue 3, 2017, Pages 10-18]
Shadipour, Asiyeh Numerical simulation of micropolar fluid flow through an asymmetric tapered stenosis artery [Volume 17, Issue 12, 2018, Pages 33-41]
Shadmani, Shahab Experimental Study of Flow Control Over an Ahmed Body Using Plasma Actuator [Volume 17, Issue 12, 2018, Pages 523-530]
Shafaee, Maziar Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
Shafaee, Maziar Discovering an empirically new relation and obtain the flow pattern map for dimpled tubes in two-phase flow for refrigerant R600-a [Volume 17, Issue 7, 2017, Pages 39-48]
Shafaee, Maziar Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
Shafaghat, Rouzbeh Numerical Modeling of High-Speed Tunneled Hull Turning Circle Maneuver for Investigating the Speed and Rudder Angle Effects on Maneuver Parameters [Volume 17, Issue 2, 2017, Pages 85-92]
Shafei, Ali mohammad Dynamic analysis of flexible robotic manipulators constructed of functionally graded materials [Volume 17, Issue 12, 2018, Pages 145-156]
Shafiee Ashtiani, Milad Balance Recovery of a Humanoid Robot Using Hip and Ankle Joints on Small Contact Surfaces [Volume 17, Issue 1, 2017, Pages 413-422]
Shafiee Ashtiani, Milad Real Time Direct Kinematics Solution of 3-RPS Parallel Robot Using a Semi-Analytical Homotopy Method [Volume 17, Issue 6, 2017, Pages 303-310]
Shafiei, Alireza Analysis of composite beam, having initial geometric imperfection, subjected to off-center impact [Volume 17, Issue 5, 2017, Pages 185-192]
Shafiei Alavijeh, Mohammad Modeling and optimizing lapping process of 440C steel by Neural Network and Multi-objective particle swarm optimization algorithm [Volume 17, Issue 8, 2017, Pages 201-212]
Shahab, Mahdi Investigation of the effect of control unit on disruption to fault detection of vehicle active suspension system with hydraulic actuator [Volume 17, Issue 4, 2017, Pages 443-452]
Shahabi Nejad, Esmaeil Elastoplastic buckling analysis of rectangular plates over the Pasternak foundation based on incremental and proportional theories [Volume 17, Issue 3, 2017, Pages 205-215]
Shah Amirian, Seyed Mohammad Ebrahim Numerical simulation of thermal effects of continuous wave laser on living tissue with blood perfusion [Volume 17, Issue 4, 2017, Pages 125-133]
Shahani, Amirreza Fracture characterization of rubbers by J integral testing [Volume 17, Issue 1, 2017, Pages 161-172]
Shahani, Amir Reza Simulation of crack growth rate in T56 jet engine compressor blade using Raju-newman method [Volume 17, Issue 11, 2018, Pages 21-30]
Shahbani Zahiri, Amin Investigation of inertial force effects on the heat transfer of viscoelastic fluid flow inside expanded planar channel with the symmetric abrupt expansion [Volume 17, Issue 6, 2017, Pages 139-148]
Shahbazi, Hamed Practical implementation of a PID - Model Reference Adaptive Controller (MRAC) for a 2-DOF Camera Gimbal [Volume 17, Issue 7, 2017, Pages 325-332]
Shahbazi, Hamed Design and Implementation of a Neural Intelligent Controller and a Hybrid PD Controller for Quadrotor [Volume 17, Issue 10, 2018, Pages 194-204]
Shahbazian, Hamidreza Comparison of Various Arrangement Effects of V-Shape Rib Technologies on Turbulence and Heat Transfer Enhancement in Gas Turbine Blade Internal Cooling [Volume 17, Issue 5, 2017, Pages 316-326]
Shahbazian, Mehdi Fault detection in nonlinear dynamical systems using multi-sensor data fusion based on Hybrid Extended Information Filter [Volume 17, Issue 2, 2017, Pages 413-419]
Shahbazi Asl, Mohammad Numerical simulation of micropolar fluid flow through an asymmetric tapered stenosis artery [Volume 17, Issue 12, 2018, Pages 33-41]
Shahbazi karami, Javad Finite element simulation of selective laser melting process for fabrication of a sample part under various support conditions [Volume 17, Issue 4, 2017, Pages 143-153]
Shahgholi, Majid Nonlinear vibrations and stability analysis of a micro rotating shaft by considering the modified couple stress theory and micro inertia effect [Volume 17, Issue 4, 2017, Pages 134-142]
Shahgholi, Majid Resonance analysis and free nonlinear vibrations of a nanocomposite with internal damping [Volume 17, Issue 12, 2018, Pages 98-104]
Shahidi, Alireza A New Method for Bending Analysis of Nano Beam and Rectangular Nano Plate: Full Modified Nonlocal Theory [Volume 17, Issue 3, 2017, Pages 376-384]
Shahidi, Alireza Investigation of spontaneous curvature and membrane initial configuration on shape evolution of two-component vesicle [Volume 17, Issue 4, 2017, Pages 9-16]
Shahmardan, Mohammad Mohsen Investigation of inertial force effects on the heat transfer of viscoelastic fluid flow inside expanded planar channel with the symmetric abrupt expansion [Volume 17, Issue 6, 2017, Pages 139-148]
Shahmardan, Mohammad Mohsen Numerical study of three dimensional instability of nonlinear viscoelastic fluid flow around a sphere [Volume 17, Issue 12, 2018, Pages 213-222]
Shahnazi, Reza Pitch Angle Control of a High-Power Wind Turbine Using Optimal Fractional-order PID Controller [Volume 17, Issue 3, 2017, Pages 167-176]
Shahrajabian, Hamzeh Ultrasonic assisted magnetic abrasive finishing of inner surface of tube [Volume 17, Issue 5, 2017, Pages 103-110]
Shahravi, Majid Modelling Wheel Motion in order to prevent Slipping as it Braking: Using Classic Models and FEM [Volume 17, Issue 6, 2017, Pages 248-256]
Shahravi, Morteza buckling and Vibration analysis of a thick cylindrical sandwich panel with flexible core using an improved high-order theory [Volume 17, Issue 3, 2017, Pages 227-238]
Shahriari, Alireza Effect of magnetic field on natural convection heat transfer of nanofluid in wavy cavity with non-uniform temperature distribution [Volume 17, Issue 4, 2017, Pages 29-40]
Shahriari, Alireza Numerical study of heat transfer and entropy generation of RayleighâBÙenard convection nanofluid in wavy cavity with magnetic field [Volume 17, Issue 10, 2018, Pages 385-396]
Shahrokhian Dehkordi, Mohammad Amin An Experimental study on Lost Foam Casting using the Taguchi method [Volume 17, Issue 5, 2017, Pages 327-334]
Shahverdi, Pourya Imitation of Human Motion by a NAO Humanoid Robot Using an Analytical Method and Considering Balance of the Robot [Volume 17, Issue 7, 2017, Pages 386-396]
Shajari-Ghasemkheily, Abdullah Using the Method of Inverse Problems in Implementing the Solid Immersed Boundaries on Vorticity-Streamfunction Formulation of the Incompressible Viscous Fluid Flow [Volume 17, Issue 10, 2018, Pages 397-404]
Shakeri, Mohsen Analysis of dimensional errors for metallic bipolar plates in single PEM fuel cell [Volume 17, Issue 9, 2017, Pages 55-64]
Shakeri, Mohsen Optimization of pressure paths in hydrodynamic deep drawing assisted by radial pressure with inward flowing liquid using a hybrid method [Volume 17, Issue 11, 2018, Pages 311-322]
Shakouri, Ehsan Experimental evaluating and statistical modeling of temperature elevation in bone drilling with internal cooling with gas [Volume 17, Issue 3, 2017, Pages 47-54]
Shakouri, Ehsan Theoretical and Experimental Investigation of Heat Generation in Bone Drilling: Determination of the Share of Heat Input to the Bone Using Machining Theory and Inverse Conduction Heat Transfer [Volume 17, Issue 7, 2017, Pages 131-140]
Shakouri, Meisam Effects of the speed of applying loads on the growth of inclined crack in plates using Peridynamic theory [Volume 17, Issue 1, 2017, Pages 403-412]
Shamekhi, Amirhossein The Effect of Injector Angle and Start of Injection on Spray-Wall Interaction in Gasoline Direct Injection Engine [Volume 17, Issue 1, 2017, Pages 95-105]
Shamekhi, Amir Hossein Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
Shams, Shahrokh A Comprehensive Model to Compute Incompressible-Subsonic Compressible Unsteady Aerodynamic Loads using Indicial Functions [Volume 17, Issue 1, 2017, Pages 353-364]
Shams, Shahrokh Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2018, Pages 229-238]
Shams Esfand Abadi, Vida Walking Path Prevision of Biped Robot along with Stability and Optimization of Power Consumption in a Single Support Phase [Volume 17, Issue 11, 2018, Pages 1-11]
Shamsi, Reza A BEM/RANS Coupled Method for Numerical Simulations of Podded Drive System [Volume 17, Issue 2, 2017, Pages 65-76]
Shapoorgan, Omid Experimental investigation of the effect of temperature in extrusion process of ECAPed nanostructured Titanium [Volume 17, Issue 4, 2017, Pages 52-60]
Shariat Panahi, Masoud Balance Recovery of a Humanoid Robot Using Hip and Ankle Joints on Small Contact Surfaces [Volume 17, Issue 1, 2017, Pages 413-422]
Shariat Panahi, Masoud Topology, shape and size optimization of 3 D tensegrity structures with specified number of members under external loads [Volume 17, Issue 4, 2017, Pages 255-266]
Sharifi, Seyed Mohammad Hesein Energy, Exergy and Environmental Analysis of Using Hybrid Compression-Absorption Refrigeration System on a Merchant Ship [Volume 17, Issue 10, 2018, Pages 429-438]
Sharifnejad, Ali Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
Shateri, Alireza Exact solutions of flow between two concentric pipes and flow over porous wall by a new couple-stress theory [Volume 17, Issue 2, 2017, Pages 369-376]
Sheida, Mojtaba Numerical Investigation of non-homogeneity and specific area in porous media on packed bed reactor performance by Lattice Boltzmann Method [Volume 17, Issue 12, 2018, Pages 446-456]
Sheikhi, Mohammad Morad Point-cloud lossless compression new algorithm by merging gray-coded structured light series patterns and compression of two-dimensional single channel matrix [Volume 17, Issue 11, 2018, Pages 371-379]
Sheikhi, Soheil Optimization and advanced exergy evaluation of a Clausius-Rankine cycle to be used in solar power systems [Volume 17, Issue 7, 2017, Pages 333-342]
Sheikhzadeh, GhanbarAli Numerical simulation of the effect of the geometry and boundary conditions on Supersonic flow in 2D MHD channel . [Volume 17, Issue 8, 2017, Pages 301-312]
Sheykhi, Mohammad Modeling of combined heating and power system driven by Stirling engine from the perspective of the fuel consumption and pollution emission [Volume 17, Issue 10, 2018, Pages 301-311]
Shikhzade, Ghanbarali Investigation of experimental and numerical simulation of residual stresses distribution of rolling mill rolls in ultrasonic peening technology [Volume 17, Issue 7, 2017, Pages 316-324]
Shirani, Behzad Design of an Hâ-PID Controller for an UAV Auto-Landing System Based on External Navigation [Volume 17, Issue 11, 2018, Pages 89-96]
Shirani, Ebrahim Investigation of turbulent slot impinging jet using laser doppler anemometry method â Experimental research and error analysis [Volume 17, Issue 4, 2017, Pages 92-100]
Shirani, Ebrahim The effect of wall force field on temperature distribution in nanochannel contains Lennard-Jones fluid by molecular dynamic simulation [Volume 17, Issue 6, 2017, Pages 23-31]
Shirani, Ebrahim Study the effect of conservative force size and type on particles radios in Dissipative Particle Dynamics method [Volume 17, Issue 10, 2018, Pages 249-258]
Shiuooei, Pooya Design and Practical Implementation of a Fractional Order PID Controller for a Single Flexible-Link Robot [Volume 17, Issue 10, 2018, Pages 411-419]
Shoaei, Mozhdeh Investigation of the effect of mid-tunnel shaft geometry on dispersion of the pollutant in environment [Volume 17, Issue 6, 2017, Pages 13-22]
Shojaee, Taghi Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
Shojaee, Taghi Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
Shojaei, shahab Survey the effect of forming speed on fld for Al 6061 sheets [Volume 17, Issue 10, 2018, Pages 333-340]
Shokrollahi, Saeed A Comprehensive Model to Compute Incompressible-Subsonic Compressible Unsteady Aerodynamic Loads using Indicial Functions [Volume 17, Issue 1, 2017, Pages 353-364]
Shooshtar, Hamid Fracture characterization of rubbers by J integral testing [Volume 17, Issue 1, 2017, Pages 161-172]
Siciliano, Bruno A novel Lyapunov function for stability of haptic device in simulating virtual objects [Volume 17, Issue 10, 2018, Pages 367-374]
Sijanivandi, Ramin Calculation of effective diffusion coefficient of tracer in tumor tissue with microvasculature using inverse method [Volume 17, Issue 10, 2018, Pages 405-410]
Silani, Mohammad Calculation of size-dependent surface energy of metallic nanoplates using molecular dynamics simulations [Volume 17, Issue 11, 2018, Pages 447-452]
Sobhani, Hossein Numerical simulation of the non-Fourier heat conduction of the single-phased âand dual-phased lagging in sand: local thermal equilibrium [Volume 17, Issue 3, 2017, Pages 446-450]
Sobhanirad, Sima Experimental study of galloping-based energy harvesting system using piezoelectric materials [Volume 17, Issue 10, 2018, Pages 233-241]
Sodagar, Sina Evaluation of embedded adjacent cylinders in elastic matrix using short-pulse MIIR technique [Volume 17, Issue 11, 2018, Pages 239-246]
Soheilifard, Reza Coarse-graining of proteins using collective coordinates of the residues [Volume 17, Issue 2, 2017, Pages 41-46]
Soleimani, Effat A finite element viscoelastic model based on consecutive transverse ultrasound images of carotid artery [Volume 17, Issue 7, 2017, Pages 421-430]
Soleimani, Masoud Development of a new Method for Experimental Dielectrophoresis Force Measurement in the Microfluidic Cell Sorting Actuators [Volume 17, Issue 3, 2017, Pages 150-158]
Soleymani Shishvan, Siamak Discrete dislocation plasticity investigation of creep deformation in nickel-based single crystal superalloys [Volume 17, Issue 7, 2017, Pages 171-179]
Soltani, Madjid Calculation of effective diffusion coefficient of tracer in tumor tissue with microvasculature using inverse method [Volume 17, Issue 10, 2018, Pages 405-410]
Soltani, Madjid Simulation of oxygen pressure and nanoparticle FMISO concentration in tissue by considering a real capillary network [Volume 17, Issue 11, 2018, Pages 125-132]
Soltani, Majid Numerical simulation of unsteady free stream velocity on an oscillating
horizontal axis wind turbine blade element [Volume 17, Issue 3, 2017, Pages 1-9]
Soltani, Majid Calculation of diffusion coefficients in a normal tissue and tumor using the Levenberg-Marquardt method [Volume 17, Issue 4, 2017, Pages 1-8]
Soltani, Mohammad Reza Experimental investigation of ground effects on aerodynamics characteristics of a delta wing airplane model [Volume 17, Issue 9, 2017, Pages 281-289]
Soorgee, Mohammadhossein Fabrication and test of a piezo-composite transducer for inspection of plate structures in contact with fluid using Lamb waves [Volume 17, Issue 1, 2017, Pages 375-382]
Sotoude, Hadi Hydrodynamic Design and Numerical Simulation of a Very Low Head Axial Turbine (VLH) [Volume 17, Issue 12, 2018, Pages 373-381]
Soveity, Salem Numerical simulation of shear thickening fluid impregnated polypropylene fabric and comparing with experimental results [Volume 17, Issue 2, 2017, Pages 221-230]
T
Ta’atizadeh, Erfan Simulation of oxygen pressure and nanoparticle FMISO concentration in tissue by considering a real capillary network [Volume 17, Issue 11, 2018, Pages 125-132]
Taeibi-Rahni, Mohammad Numerical Investigation of non-homogeneity and specific area in porous media on packed bed reactor performance by Lattice Boltzmann Method [Volume 17, Issue 12, 2018, Pages 446-456]
Taghavi Zenous, Reza Investigation of Spike Stall Inception and its Propagation in a Low Speed Axial Compressor Rotor [Volume 17, Issue 5, 2017, Pages 111-118]
Taghinezhad, Marziye Modeling and System Identification of a reaction wheel with experimental data [Volume 17, Issue 11, 2018, Pages 437-446]
Taghizadeh, Hadi Experimental investigation and numerical simulation of the fatigue behavior of interference fitted specimens subjected to bolt clamping force [Volume 17, Issue 11, 2018, Pages 247-258]
Taghvaeipour, Afshin A Modification in the Decoupled Natural Orthogonal Complement Method, Using Virtual Spring Concepts [Volume 17, Issue 6, 2017, Pages 377-384]
Tahani, Masoud Study the effect of environment temperature on mechanical and fracture behavior of carbon nanotubes [Volume 17, Issue 3, 2017, Pages 87-92]
Tahani, Mojtaba Development of implicit Algorithm for High-order discontinuous Galerkin methods to solve compressible flows using Newton-Krylov methods [Volume 17, Issue 3, 2017, Pages 281-292]
Tahani, Mojtaba Numerical analysis of attack angle effects on 3D supersonic turbulent flow around of blunt body along with opposite jet injection [Volume 17, Issue 3, 2017, Pages 355-366]
Tahani, Mojtaba Investigation of ducted wind turbine using potential flow method [Volume 17, Issue 10, 2018, Pages 350-358]
Taheri, Moein Sensitivity analysis of 3D manipulation of spherical nanoparticles by using E-fast method [Volume 17, Issue 11, 2018, Pages 59-69]
Taheri, Morteza Cooling performance evaluation of overhead mixing and floor displacement ventilation systems inside a bus by using 65-nodes thermal comfort model [Volume 17, Issue 2, 2017, Pages 333-342]
Taherian, Amir Hosein A new relation for equalization of load spectrum to a constant amplitude load suitable for fatigue laboratory testing [Volume 17, Issue 11, 2018, Pages 31-38]
Taheri-Behrooz, Fathollah Experimental and Numerical Analysis of Sandwich Composite Beams under Four-Point Bending [Volume 17, Issue 1, 2017, Pages 241-252]
Taherifar, Ali Identification and Torque Control of Series Elastic Actuator of Lower Limb Extremity Exoskeleton [Volume 17, Issue 8, 2017, Pages 1-8]
Taheri-Garavand, Amin Intelligent fault diagnosis of cooling radiator based on thermal image processing and artificial intelligence techniques [Volume 17, Issue 2, 2017, Pages 240-250]
Tahershamsi, Ahmad Experimental investigation of dynamics of the air-core vortices and estimating the air entrainment rate at a horizontal intake [Volume 17, Issue 8, 2017, Pages 59-67]
Tahmasbi, Kamin Investigation of the effective parameters on the mechanical and structural properties of aluminum wire sample fabricated by friction stir extrusion [Volume 17, Issue 4, 2017, Pages 78-84]
Tahouneh, Sanam Validation of a Polytropic-Base Blowby Model using Experimental Data of Gasoline Fuelled Motoring Cycles [Volume 17, Issue 10, 2018, Pages 205-212]
Talaei, Mohammad Saeid Calculation of size-dependent surface energy of metallic nanoplates using molecular dynamics simulations [Volume 17, Issue 11, 2018, Pages 447-452]
Talebi, Shahram Numerical simulation of an L-shaped micromixer and investigation of the effect of variations of geometrical parameters on its performance [Volume 17, Issue 3, 2017, Pages 293-304]
Talebi, Shahram Physical modeling of melt flow in steel continuous casting tundish [Volume 17, Issue 6, 2017, Pages 385-392]
Talebpour, Zahra The Influence of Random Vortices on the Heat Transfer Rate from a Spherical Particle [Volume 17, Issue 3, 2017, Pages 93-104]
Tale Masouleh, Mehdi The Mechanical interference-free workspace of the planar parallel robots using geometric approach [Volume 17, Issue 4, 2017, Pages 101-110]
Tale Masouleh, Mehdi Imitation of Human Motion by a NAO Humanoid Robot Using an Analytical Method and Considering Balance of the Robot [Volume 17, Issue 7, 2017, Pages 386-396]
Tale Masouleh, Mehdi Position Control of a 6-DoF Pneumatic Gough-Stewart Parallel Robot Using Backstepping-Sliding Mode Controller [Volume 17, Issue 10, 2018, Pages 101-111]
Tale Masouleh, Mehdi Motion planning of mobile robots in the unknown circumstances based on the receding horizon control and velocity obstacle concepts [Volume 17, Issue 11, 2018, Pages 259-268]
Talesh Bahrami, Hamid Reza A numerical analysis of dropwise condensation of nanofluid on an inclined plate [Volume 17, Issue 3, 2017, Pages 105-114]
Talezadehlari, Ali The effect of geometrical imperfection on the axial buckling of unstiffened and stiffened composite cylinders with and without cutout [Volume 17, Issue 7, 2017, Pages 245-256]
Talezadehlari, Ali Buckling analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method (GDQM) [Volume 17, Issue 11, 2018, Pages 385-396]
Talezade Shirazi, Amin Numerical simulation of the characteristic chart and the steady state wake flow past a marine propeller using OpenFOAM [Volume 17, Issue 9, 2017, Pages 290-300]
Tarabi, Abbas Numerical Investigation of Lateral jet interaction effects on aerodynamic behavior of a supersonic projectile [Volume 17, Issue 4, 2017, Pages 431-442]
Tarvirdizadeh, Bahram Trajectory tracking of a tractor-trailer robot using model predictive control [Volume 17, Issue 11, 2018, Pages 210-218]
Tavakoli Sabour, Ali Continuous adjoint-based shape optimization for low reynolds number oscillating airfoils in turbulent flow on unstructured grids [Volume 17, Issue 7, 2017, Pages 161-170]
Tavakolpour-Saleh, AliReza Modeling, development, and evaluation of a micro-robot equipped with vibratory actuator [Volume 17, Issue 8, 2017, Pages 413-422]
Tavangar Roosta, Saeed Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
Tayebi, Ali Investigation of convection-diffusion process in a two-phase air-water flow using Smoothed Particle Hydrodynamics [Volume 17, Issue 2, 2017, Pages 115-125]
Tayyebi, Moslem Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process [Volume 17, Issue 7, 2017, Pages 180-184]
Tehrani, Mohammad The hybrid unscented /Hâ Kalman filter in state estimation of nonlinear problems [Volume 17, Issue 4, 2017, Pages 315-321]
Teymourtash, Ali Reza Experimental and Numerical Investigations on the Aerodynamic Performance of a Hinged Bladed Vertical Axis Wind Turbine [Volume 17, Issue 5, 2017, Pages 21-30]
Teymourtash, Ali Reza Trajectory Investigation of a Transonic Spherical Projectile under Hop-Up Mechanism Using Simulation of Turbulent Three-Dimensional Non-Stationary Flow [Volume 17, Issue 9, 2017, Pages 25-35]
Teymourtash, Ali Reza A comparison between polydispersed and monodispersed radius modeling techniques of droplets in condensing steam flow in a supersonic nozzle by Eulerian-Lagrangian method [Volume 17, Issue 10, 2018, Pages 47-57]
Torabi, Ali Reza Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2018, Pages 229-238]
Torabi, Farschad Three-dimensional modeling of a dew-point evaporative cooler using a modified boundary condition and considering effects of channelsâ entrance regions [Volume 17, Issue 7, 2017, Pages 68-78]
Torabi, Pourya Kinematic Analysis and Mechatronic Design of a 3-DOF Parallel Robot for Craniotomy Surgery [Volume 17, Issue 11, 2018, Pages 289-299]
Torkan, Ehsan Occurrence of parametric resonance in vibrations of rectangular plates resting on elastic foundation under passage of continuous series of moving masses [Volume 17, Issue 9, 2017, Pages 225-236]
Torshizi, Edris Injection of twin oblique nanofluid jets into a water cross-flow: An Eulerian-Eulerian two-phase analysis [Volume 17, Issue 12, 2018, Pages 123-134]
Turer, Ahmet Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of prestressed pipe monitoring using Acoustic Emission technique [Volume 17, Issue 2, 2017, Pages 306-314]
Turer, Ahmet Experimental study on corrosion detection of prestressed pipe using Acoustic Emission method [Volume 17, Issue 8, 2017, Pages 231-240]
V
Vadudi Mofid, Saman Flow Control via Co-Flow Jet over Clark-Y Airfoil [Volume 17, Issue 2, 2017, Pages 147-156]
Vaezi, Mohammad Prediction of fluid flow through U-bend channels using linear and nonlinear models of turbulence. [Volume 17, Issue 6, 2017, Pages 423-432]
Vahabi, Mohammad Experimental investigation and numerical simulation of thermal energy storage in phase change material under different tilt angles of the enclosure [Volume 17, Issue 11, 2018, Pages 133-143]
Vahedi, Seyed Masoud Effect of two species modeling of polymeric coating and drug metabolism via Drug-Eluting Stents [Volume 17, Issue 3, 2017, Pages 305-316]
Vahidi, Bahman Investigating Stress Urinary Incontinence in Women Using Computational Methods and Clinical Data [Volume 17, Issue 5, 2017, Pages 419-429]
Vahidi, Bahman A Hyper-Viscoelastic Model for an Individual Stem Cell Subjected to Cyclic Loading for Mechanical Modulation toward Differentiating to Fibrochondrocytes [Volume 17, Issue 7, 2017, Pages 207-216]
Vajdi, Mohammad Experimental and numerical study of double splitter blades effect on the centrifugal pump performance [Volume 17, Issue 3, 2017, Pages 196-204]
Valipour, Ali Combination of independent component analysis and support vector machines for intelligent faults diagnosis of rotating machinery [Volume 17, Issue 6, 2017, Pages 257-264]
Valipour, Mohammad Sadegh Effect of two species modeling of polymeric coating and drug metabolism via Drug-Eluting Stents [Volume 17, Issue 3, 2017, Pages 305-316]
Valizadeh, Ismael Design of Spike Nozzle and Comparison of Turbulence Models in Numerical Simulation of its Flow-field in Design and Off-design Conditions [Volume 17, Issue 6, 2017, Pages 190-200]
Varedi Koulaie, S. Mojtaba Real Time Direct Kinematics Solution of 3-RPS Parallel Robot Using a Semi-Analytical Homotopy Method [Volume 17, Issue 6, 2017, Pages 303-310]
Varmazyar, Mostafa Numerical Investigation of the Piston Effect of Supercritical Fluid under Microgravity Conditions Using Lattice Boltzmann Method [Volume 17, Issue 5, 2017, Pages 138-146]
Varshovi-Jaghargh, Payam The Mechanical interference-free workspace of the planar parallel robots using geometric approach [Volume 17, Issue 4, 2017, Pages 101-110]
Vatankhah, Ramin Nonlinear dynamic analysis of an atomic force microscope submerged in liquid based on strain gradient theory [Volume 17, Issue 12, 2018, Pages 275-285]
Vaziri, Abas Experimental study of ballistic properties of hybrid aluminum and epoxy matrix composite reinforced with carbon nanotube [Volume 17, Issue 8, 2017, Pages 126-132]
Vaziri Naeen Nejad, Javad Investigation of optimized body tilt angle and acoustic excitation affecting performance of hydro cyclone particles separator based on genetic algorithm [Volume 17, Issue 3, 2017, Pages 37-46]
Veysi, Farzad Experimental analysis of thermal performance of the modified vacuum tube solar collector [Volume 17, Issue 3, 2017, Pages 55-62]
Veysi Gorgabad, Amir A Study on the Nonlinear Vibrations of Electrostatically Actuated Micro Beams with Anelastic Stress-Strain Behavior [Volume 17, Issue 7, 2017, Pages 197-206]
Vosoughi, Hamid Design and implementation of AHRS by using Kautz function and predictive estimator with Eulerâs dynamic [Volume 17, Issue 6, 2017, Pages 221-232]
Vossoughi, Gholamreza Identification and Torque Control of Series Elastic Actuator of Lower Limb Extremity Exoskeleton [Volume 17, Issue 8, 2017, Pages 1-8]
Y
Yaghootian, Amin Thermoelastic buckling of functionally graded rectangular plate based on improved third order shear deformation theory [Volume 17, Issue 9, 2017, Pages 36-44]
Yaghoubi, Mahmood Experimental study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 17, Issue 11, 2018, Pages 118-124]
Yarahmadi, Majid Design of quantum intelligent robust controller via time variant break frequency bandwidth sliding surface [Volume 17, Issue 1, 2017, Pages 305-310]
Yarali, Ebrahim Design, fabricate and testing the novel Magnetorheologic damper involving stabilizer nanoparticles of silicone [Volume 17, Issue 8, 2017, Pages 252-258]
Yazdani, Alireza Three-Dimensional Aerothermodynamic Optimization of the Stator Blade of an Axial-Flow Gas Turbine in an Open-Source Platform [Volume 17, Issue 10, 2018, Pages 176-184]
Yazdani, Khashayar Numerical analysis of the electric field effect on mass transfer through
a moist object [Volume 17, Issue 1, 2017, Pages 383-393]
Yazdani, Mojtaba Low Velocity Impact Response of CARALL composites reinforced with nano particles [Volume 17, Issue 2, 2017, Pages 58-64]
Yazdankhoo, Behnam Improving transparency in bilateral teleoperation systems based on model-mediated approach [Volume 17, Issue 1, 2017, Pages 273-283]
Yekani Motlagh, Saber Numerical simulation of magnetic nanoparticle delivery at location of abdominal aortic bifurcation using single wire magnetic source [Volume 17, Issue 9, 2017, Pages 65-74]
Yoosefzadeh, Shahrooz Buckling of FGM thick-walled cylindrical shell supported with third order shear theory under uniform Axial and lateral loads [Volume 17, Issue 7, 2017, Pages 373-385]
Yousefi, Jalal AE- based damage investigation in composite laminates under low-velocity impact tests [Volume 17, Issue 7, 2017, Pages 91-100]
Yousefifard, Mahdi Numerical investigation of symmetry and asymmetry rigid wedge slamming using OpenFOAM code [Volume 17, Issue 7, 2017, Pages 343-352]
Yousefi Koma, Aghil Balance Recovery of a Humanoid Robot Using Hip and Ankle Joints on Small Contact Surfaces [Volume 17, Issue 1, 2017, Pages 413-422]
Yousefi Koma, Aghil Bladed Disk Nodal Diameter Extraction by Numerical and Experimental Methods [Volume 17, Issue 2, 2017, Pages 343-349]
Yousefi-Koma, Aghil Real Time Direct Kinematics Solution of 3-RPS Parallel Robot Using a Semi-Analytical Homotopy Method [Volume 17, Issue 6, 2017, Pages 303-310]
Yousefi-Koma, Aghil Online proportional myoelectric control of a humanoid shoulder motions using electromyogram signals [Volume 17, Issue 9, 2017, Pages 1-12]
Z
Zabetian, Mohammad Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
Zabetian Toroghi, Mohammad Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
Zabihian, Ehsan Fast determination of system specifications of GEO communication satellites. [Volume 17, Issue 2, 2017, Pages 404-412]
Zafariyan, Sadegh Radiative Calculations for Non-Gray Media with Heat Sourcesby using the Spectral Line-Based Weighted Sum of Gray Gases Model [Volume 17, Issue 1, 2017, Pages 106-116]
Zahedi, Ali Experimental Determination and Numerical Prediction of Necking and Fracture Forming Limit Curves of 2024 Aluminum Alloy Sheet Using Damage Criterion [Volume 17, Issue 9, 2017, Pages 361-371]
Zahedinejad, Parham Thermal post-buckling analysis of eccentrically stiffened FG cylindrical shells surrounded by elastic foundation and subjected to thermal radial loading [Volume 17, Issue 3, 2017, Pages 397-404]
Zahiri, Amir Pooyan Implementation of the anisotropic minimum-dissipation (AMD) sub-grid scale model in OpenFOAM and its evaluation in treating turbulent channel flow [Volume 17, Issue 12, 2018, Pages 478-484]
Zahmatkesh, Iman Injection of twin oblique nanofluid jets into a water cross-flow: An Eulerian-Eulerian two-phase analysis [Volume 17, Issue 12, 2018, Pages 123-134]
Zajkani, Asghar The Influence of Pre- Mechanical Friction Stir Processing on Stress State dependent Ductile Damage of 7075-T6 Aluminum Alloy [Volume 17, Issue 1, 2017, Pages 365-374]
Zajkani, Asghar Elastoplastic buckling analysis of rectangular plates over the Pasternak foundation based on incremental and proportional theories [Volume 17, Issue 3, 2017, Pages 205-215]
Zajkani, Asghar Evolutionary vertex forming limit model in development of diffuse to localized viscoplastic instability of sheets [Volume 17, Issue 12, 2018, Pages 204-212]
Zakerzadeh, Mohammad Reza Design and Analysis of a knee-ankle-foot orthosis using torsional spring [Volume 17, Issue 10, 2018, Pages 185-193]
Zakerzadeh, Mohammad Reza Torsional modeling and experimental characterization of a shape memory alloy rod, using Brinsonâs asymmetric model [Volume 17, Issue 12, 2018, Pages 469-477]
Zamani, Ehsan Analytical study the ballistic behavior of thin laminated composite plates based on tsai-hill and maximum strain criterions [Volume 17, Issue 6, 2017, Pages 41-50]
Zamani, Esmaeil A novel semi analytical solution for the dynamic and heat transfer analysis of Stagnation Point Flow using BK-HAM Method [Volume 17, Issue 3, 2017, Pages 270-280]
Zamani, Mohammad Reza An experimental investigation on the tensile behavior of epoxy/carbon fibers composites containing anhydride self-healing material [Volume 17, Issue 3, 2017, Pages 336-342]
Zamanian, Mehdi Trajectory tracking and stabilization control of a wheeled robot using predictive algorithm [Volume 17, Issue 12, 2018, Pages 167-175]
Zamanipour, Hassan Investigation of convection-diffusion process in a two-phase air-water flow using Smoothed Particle Hydrodynamics [Volume 17, Issue 2, 2017, Pages 115-125]
Zamansani, Mohammad Effects of design and lubrication parameters on the dynamic stability of noncircular lobed journal bearings with power law lubricant fluid [Volume 17, Issue 12, 2018, Pages 243-254]
Zandsalimy, Mohammad Evaluation of FPGA hardware as a new approach for accelerating the numerical solution of the Laplace problem [Volume 17, Issue 1, 2017, Pages 67-74]
Zarafshan, Payam Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
Zarafshan, Payam Optimization of Alpha Type Stirling Engine Phase Angle with Step-By-Step Simulation Method [Volume 17, Issue 10, 2018, Pages 341-349]
Zare, Parvaneh Numerical simulation of an L-shaped micromixer and investigation of the effect of variations of geometrical parameters on its performance [Volume 17, Issue 3, 2017, Pages 293-304]
Zare Hossein Abadi, Shahab Extension of Maximum Tensile Stress Criterion to Mixed Mode Fracture of Orthotropic Materials Considering T-stress [Volume 17, Issue 10, 2018, Pages 292-300]
Zarei, Hamid Reza Numerical simulation of shear thickening fluid impregnated polypropylene fabric and comparing with experimental results [Volume 17, Issue 2, 2017, Pages 221-230]
Zarei, Jalal The effects of laser pulse energy and focal point position on laser surface hardening of AISI 410 stainless steel [Volume 17, Issue 6, 2017, Pages 311-318]
Zarei, Mohsen Numerical simulation of upward co-current gas-liquid two-phase flow in the vertical pipes of large diameter, by volume of fluid method [Volume 17, Issue 1, 2017, Pages 441-452]
Zareie, Saeed A numerical analysis of dropwise condensation of nanofluid on an inclined plate [Volume 17, Issue 3, 2017, Pages 105-114]
Zarrati, Amir Reza Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
Zehtabchi, Seyed Sina Trajectory and control design of a quadcopter for crossing obstacles using sliding mode method [Volume 17, Issue 6, 2017, Pages 351-356]
Zeynalabedini, Mostafa Numerical modeling of air bubbles entrainment in liquid slug body at Horizaontal duct [Volume 17, Issue 4, 2017, Pages 177-187]
Zeynalabedini, Mostafa Evaluation of the slug two-phase flow parameters in a horizontal two-dimensional duct [Volume 17, Issue 4, 2017, Pages 349-358]
Ziabasharhagh, Masoud Experimental thermal investigation of turbocharger in internal combustion engine and considering effect of electrical water pump on heat soak test [Volume 17, Issue 12, 2018, Pages 266-274]
Zia Basharhagh, Masoud The Effect of Injector Angle and Start of Injection on Spray-Wall Interaction in Gasoline Direct Injection Engine [Volume 17, Issue 1, 2017, Pages 95-105]
Zia Basharhagh, Masoud Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
Zia Basharhagh, Masoud Calculation of diffusion coefficients in a normal tissue and tumor using the Levenberg-Marquardt method [Volume 17, Issue 4, 2017, Pages 1-8]
Ziaee, Sima Experimental, numerical and theoretical analysis of energy absorption process by aluminum profile with H-shaped thin-walled cross section [Volume 17, Issue 8, 2017, Pages 213-223]
Ziaei-Rad, Saeed Investigation of spontaneous curvature and membrane initial configuration on shape evolution of two-component vesicle [Volume 17, Issue 4, 2017, Pages 9-16]
Zilabi, Hamed Effect of Angel of the Crack Axial on Shape of Crack Tip Plastic Zone for Orthotropic Materials under Various Loading Conditions [Volume 17, Issue 11, 2018, Pages 199-209]
Zohoor, Mehdi Study of electrohydraulic forming process by using experimental observations and numerical simulation with ALE method [Volume 17, Issue 4, 2017, Pages 299-306]
Zohoor, Mehdi Evaluation and optimization of drawing depth in electrohydraulic forming
(with bridge wire between electrodes) [Volume 17, Issue 9, 2017, Pages 137-144]
Zohoor, Mehdi Investigation of forming limit of brass alloy c260 at high strain rate by using electrohydraulic forming process [Volume 17, Issue 11, 2018, Pages 144-150]
Zohoori, Saeed Bladed Disk Nodal Diameter Extraction by Numerical and Experimental Methods [Volume 17, Issue 2, 2017, Pages 343-349]
Zohravi, Elnaz Study the effect of conservative force size and type on particles radios in Dissipative Particle Dynamics method [Volume 17, Issue 10, 2018, Pages 249-258]
Zohrehvand, Ali Cladding of Carbon Steel with Aluminum Stainless Layer Using Friction Stir Welding Method [Volume 17, Issue 4, 2017, Pages 410-418]
Zolfaghar, Mohammad Effects of suction/injection on flow and heat transfer over a permeable surface in presence of different nanofluids [Volume 17, Issue 9, 2017, Pages 439-449]
Zolfaghari, Abbas An experimental and simulation study of flow balance in multi-cavity plastic injection molds [Volume 17, Issue 4, 2017, Pages 285-289]
Zolfaghari, Alireza Introducing a new thermal comfort model for evaluation of local and overall thermal sensation in non-uniform environments [Volume 17, Issue 8, 2017, Pages 444-450]
Zolfaghari, Alireza Developing the thermal comfort model based on cutaneous thermoreceptors response using non-Fourier heat transfer equation [Volume 17, Issue 11, 2018, Pages 70-76]
Zolfaghari, Seyed Alireza Investigating the individual characteristics effects on thermal comfort conditions of occupants in a dense occupancy environment [Volume 17, Issue 2, 2017, Pages 275-283]
Zolfaghari, Seyed Alireza Effects of air change rate on comfort, air quality and energy consumption in an amphitheater with under-floor air distribution system [Volume 17, Issue 2, 2017, Pages 284-294]
Zolfaghari, Seyed Alireza Cooling performance evaluation of overhead mixing and floor displacement ventilation systems inside a bus by using 65-nodes thermal comfort model [Volume 17, Issue 2, 2017, Pages 333-342]
