Abbasian Arani, Ali Akbar Kinetic and Thermodynamic Study of the Combustion Characteristics of the Combination of Ammonia Fuel with Waste Gas at Elevated Pressures [Volume 24, Issue 3, 2024, Pages 153-164]
Abedi, Saeed Numerical Study of the Effect of Geometry on the Thermal Performance of a Two-Layer Porous Burner with Biogas Fuel [Volume 24, Issue 12, 2024, Pages 687-697]
Abedini, Rezvan Effect of Ultrasonic Scalpel Parameters on Vessel Sealing and Thermal Effects [Volume 24, Issue 4, 2024, Pages 259-267]
Abedini-Nassab, Roozbeh Design and Fabrication of a Bistable Microfluidic Paper-Based Transistor [Volume 24, Issue 10, 2024, Pages 667-675]
Adibi, Omid An experimental investigation on the effect of ambient temperature on the performance of a vertical air curtain refrigerator [Volume 24, Issue 9, 2024, Pages 583-595]
Ajam, Hossein Experimental Study of the Performance of the Solar Still with Sliding Absorber Plate and Equipped with a Wave Maker [Volume 24, Issue 3, 2024, Pages 165-176]
Akbari, Javad An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2024, Pages 363-371]
Akhavan Alavi, Seyed Mohammad Determination of Mechanical Properties of a Micro-Cellular Auxetic Structure Using Modified Strain Gradient Theory [Volume 24, Issue 1, 2023, Pages 11-20]
Akhoundi, Behnam Experimental Investigation of the Effect of Annealing and Printing Parameters on the Compressive Strength and Modulus of 3D Printed Porous Structures with Interconnected Pores Made of Polylactic Acid by Fused Deposition Modeling Process. [Volume 24, Issue 4, 2024, Pages 251-258]
Albonasser, Mohammad Experimental Assessment of Ductile and Shear Fracture Criteria in Stainless Steel 304 According to Hooputra Model [Volume 24, Issue 12, 2024, Pages 709-716]
Alikarami, Shahryar Experimental and Analytical Investigation on Stress Relaxation Behavior of IN718 Superalloy Made by Selective Laser Melting Method Subjected to Variable Initial Strains [Volume 24, Issue 1, 2023, Pages 1-9]
Amin Harki kay, Siamak Numerical Simulation of Single Slope Solar Still with Setting Rectangular, Triangular and Wavy Barriers on the Side Walls [Volume 24, Issue 2, 2024, Pages 97-110]
Amirabadi, Hosien An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2024, Pages 363-371]
Asghari, Saeed Construction of a Space Panel Radiator Equipped with a Heat Pipe Based on the Optimization of the Maximum Uniformity of Temperature Distribution Against the Minimum Mass [Volume 24, Issue 4, 2024, Pages 203-213]
Ashjaee, Mehdi Kinetic and Thermodynamic Study of the Combustion Characteristics of the Combination of Ammonia Fuel with Waste Gas at Elevated Pressures [Volume 24, Issue 3, 2024, Pages 153-164]
Asil Gharebaghi, Saeed Improved Noise Reduction Method for Chaotic Time Series Using Neural Network and Singular Spectrum Analysis [Volume 24, Issue 1, 2023, Pages 53-63]
Asil Gharebaghi, Saeed Evaluation of hydrodynamic parameters in vortex-induced vibration of cylindrical structures with nonlinear support [Volume 24, Issue 9, 2024, Pages 557-566]
Attarnejad, Reza Topology Optimization of Structure in the Fluid-Structure Interaction Problem using the Level Set Method [Volume 24, Issue 8, 2024, Pages 485-498]
Avazpour, Mohammad Mahdi Introducing a New Online Algorithm to Detect The Type of Surface in The Anti-lock Braking System [Volume 24, Issue 5, 2024, Pages 305-315]
Azizpour, Mohammad Numerical Simulation of Single Slope Solar Still with Setting Rectangular, Triangular and Wavy Barriers on the Side Walls [Volume 24, Issue 2, 2024, Pages 97-110]
B
Bab, Saeed Passive Vibration Control of a Nonlinear Rotating Beam Using a Nonlinear Vibration Absorber and Stability Analysis [Volume 24, Issue 10, 2024, Pages 643-655]
Badieirostami, Majid Numerical Study of an Electroosmotic Micromixer Based on G-shaped Electrodes [Volume 24, Issue 7, 2024, Pages 411-420]
Badnava, Hojjat Experimental Assessment of Ductile and Shear Fracture Criteria in Stainless Steel 304 According to Hooputra Model [Volume 24, Issue 12, 2024, Pages 709-716]
Bahrami, Ali Reza Improved Noise Reduction Method for Chaotic Time Series Using Neural Network and Singular Spectrum Analysis [Volume 24, Issue 1, 2023, Pages 53-63]
Bakhshi Jooybari, Mohammad Process and Macrostructural Analysis of Copper Tube Bonding to Carbon Fiber Composite Tube by Electromagnetic Joining Process [Volume 24, Issue 2, 2024, Pages 65-75]
Beigi Kheradmand, Azam The effect of copper content on the wear resistance of MMC composites (Fe-C-Cu-SiC) [Volume 24, Issue 9, 2024, Pages 597-609]
Berenjkoub, Mohammad Sadegh Construction of a Space Panel Radiator Equipped with a Heat Pipe Based on the Optimization of the Maximum Uniformity of Temperature Distribution Against the Minimum Mass [Volume 24, Issue 4, 2024, Pages 203-213]
Bijarchi, Mohamad Ali Numerical Study of the Formation of Compound Droplets in a Three-Phase Glass Capillary Microfluidic System [Volume 24, Issue 7, 2024, Pages 433-441]
Bouloorchi Tabalvandani, Mohammadjavad Numerical Study of an Electroosmotic Micromixer Based on G-shaped Electrodes [Volume 24, Issue 7, 2024, Pages 411-420]
D
Dabaghi, Mahnaz Determination Workability of The Novel Ti-3Al-8Mo-7V-3Cr Titanium Alloy via Ductilty Evaluation in Two-Phase Alpha-Beta and Single-Phase Beta Regions [Volume 24, Issue 2, 2024, Pages 111-118]
Dashti Gohari, Isar Construction of a Space Panel Radiator Equipped with a Heat Pipe Based on the Optimization of the Maximum Uniformity of Temperature Distribution Against the Minimum Mass [Volume 24, Issue 4, 2024, Pages 203-213]
Davaie Markazi, Amir Hossein Improving Multi-Robot Path Planning by Adaptive Artificial Potential Fields [Volume 24, Issue 7, 2024, Pages 455-466]
Davari, Alireza Experimental and Numerical Analysis of the Extrusion Process in the Forming of Metal Composite Metal Billets [Volume 24, Issue 2, 2024, Pages 119-129]
Dehghan Manshadi, Mostafa Stabilization of the Flow Over Cylinder with Time-Varying Disturbance by a Model Reduction Method Using Optimally Time-dependent Modes [Volume 24, Issue 5, 2024, Pages 269-280]
E
Edalatpour, Amirhossein Energy and Exergy Analysis of a Direct Absorption Parabolic Solar Collector Enhanced with Multi-Walled Carbon Nanotubes and Titanium Dioxide Nanoparticles [Volume 24, Issue 6, 2024, Pages 385-397]
Enjilela, Vali Numerical Stability Enhancement of Lattice Boltzmann Method in The Simulation of Incompressible Flows with Higher Reynolds Numbers [Volume 24, Issue 3, 2024, Pages 177-188]
Esfahanian, Vahid Stabilization of the Flow Over Cylinder with Time-Varying Disturbance by a Model Reduction Method Using Optimally Time-dependent Modes [Volume 24, Issue 5, 2024, Pages 269-280]
Eshaghi Oskui, Abuzar Calibration of Constitutive Models for Pressure-Sensitive Adhesives Based on Experimental Data [Volume 24, Issue 5, 2024, Pages 329-339]
Eskandari, Elham An experimental investigation on the effect of ambient temperature on the performance of a vertical air curtain refrigerator [Volume 24, Issue 9, 2024, Pages 583-595]
Esrafili, Hamid Reza An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2024, Pages 363-371]
F
Fani Sani, Abdollah Construction of a Space Panel Radiator Equipped with a Heat Pipe Based on the Optimization of the Maximum Uniformity of Temperature Distribution Against the Minimum Mass [Volume 24, Issue 4, 2024, Pages 203-213]
Farahani, Mohammadreza Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2024, Pages 717-726]
Farhang, Majid Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2024, Pages 717-726]
Fattahi, Abolfazl Numerical Study of the Effect of Geometry on the Thermal Performance of a Two-Layer Porous Burner with Biogas Fuel [Volume 24, Issue 12, 2024, Pages 687-697]
Fereydunian, Fazel The effects of resonance volume of air manifold of EC5 gasoline engine on its performance [Volume 24, Issue 9, 2024, Pages 567-573]
Firuzy Rad, Pouya Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2024, Pages 631-641]
Firuzy Rad, Pouya Design, Fabrication, and Experimental Modeling of a Piezoelectric-Based Droplet Injection System Using Statistical Methods [Volume 24, Issue 10, 2024, Pages 657-666]
G
Ghadyani, Mohsen Numerical Stability Enhancement of Lattice Boltzmann Method in The Simulation of Incompressible Flows with Higher Reynolds Numbers [Volume 24, Issue 3, 2024, Pages 177-188]
Ghafarirad, Hamed Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2024, Pages 631-641]
Ghafarirad, Hamed Design, Fabrication, and Experimental Modeling of a Piezoelectric-Based Droplet Injection System Using Statistical Methods [Volume 24, Issue 10, 2024, Pages 657-666]
Ghajar, Rahmatollah Determination of Mechanical Properties of a Micro-Cellular Auxetic Structure Using Modified Strain Gradient Theory [Volume 24, Issue 1, 2023, Pages 11-20]
Ghajar, Rahmatollah Experimental Investigation on the Energy Absorption of Lattice Thin-Walled Metal Tubes with Auxetic, Semi-Re-Entrant, and Conventional Honeycomb Cells under Axial Loading [Volume 24, Issue 5, 2024, Pages 293-303]
Gharehbash, Mahdi Ductile Fracture Analysis of Notched Epoxy Nanocomposites Reinforced with Graphene Oxide Nanoparticles Using the Equivalent Material Concept [Volume 24, Issue 4, 2024, Pages 215-223]
Ghasemi, Ahmad Ductile Fracture Analysis of Notched Epoxy Nanocomposites Reinforced with Graphene Oxide Nanoparticles Using the Equivalent Material Concept [Volume 24, Issue 4, 2024, Pages 215-223]
Ghassemi, Hojat Investigating the Fluctuating Nature of Flow in the Hartmann-Sprenger Tube [Volume 24, Issue 6, 2024, Pages 341-349]
Ghodsinejad, Amirsaeed Polymer Gear Fault Detection Based on Audio Signal and Wavelet Packet Transform [Volume 24, Issue 6, 2024, Pages 351-362]
Gorji, Hamid Process and Macrostructural Analysis of Copper Tube Bonding to Carbon Fiber Composite Tube by Electromagnetic Joining Process [Volume 24, Issue 2, 2024, Pages 65-75]
H
Haddadi, Elyas Calibration of Constitutive Models for Pressure-Sensitive Adhesives Based on Experimental Data [Volume 24, Issue 5, 2024, Pages 329-339]
Haghani, Omid Evaluation of solar steam generation under convective flow in a cylindrical structure with nature inspired water distribution [Volume 24, Issue 9, 2024, Pages 545-555]
Hajidavalloo, Ebrahim An experimental investigation on the effect of ambient temperature on the performance of a vertical air curtain refrigerator [Volume 24, Issue 9, 2024, Pages 583-595]
Hasani, Zahra Effect of Ultrasonic Scalpel Parameters on Vessel Sealing and Thermal Effects [Volume 24, Issue 4, 2024, Pages 259-267]
Hashemi, Ali The Effect of Off_Loading Insoles for Control of Knee Meniscus Tear [Volume 24, Issue 4, 2024, Pages 239-249]
Hashemi, Sayyed Experimental Investigation of Fatigue Behavior and Assessment of Stress-Life Curve of API X65 Steel [Volume 24, Issue 5, 2024, Pages 317-327]
Hashemi, Seyed Abdolmehdi Numerical Study of the Effect of Geometry on the Thermal Performance of a Two-Layer Porous Burner with Biogas Fuel [Volume 24, Issue 12, 2024, Pages 687-697]
Hashemian, Amir H. Experimental and Numerical Analysis of the Extrusion Process in the Forming of Metal Composite Metal Billets [Volume 24, Issue 2, 2024, Pages 119-129]
Heyhat, Mohammad Mahdi Evaluation of solar steam generation under convective flow in a cylindrical structure with nature inspired water distribution [Volume 24, Issue 9, 2024, Pages 545-555]
Heyhat, Mohammad Mahdi Experimental Investigation of the Effect of Mesh Hole Geometry on Fog Harvesting [Volume 24, Issue 12, 2024, Pages 699-707]
Hosseinalipour, S.M. Energy and Exergy Analysis of a Direct Absorption Parabolic Solar Collector Enhanced with Multi-Walled Carbon Nanotubes and Titanium Dioxide Nanoparticles [Volume 24, Issue 6, 2024, Pages 385-397]
Hosseinzadeh, sanaz Experimental and Numerical Analysis of the Extrusion Process in the Forming of Metal Composite Metal Billets [Volume 24, Issue 2, 2024, Pages 119-129]
Houshfar, Ehsan Kinetic and Thermodynamic Study of the Combustion Characteristics of the Combination of Ammonia Fuel with Waste Gas at Elevated Pressures [Volume 24, Issue 3, 2024, Pages 153-164]
J
Jabbaripour, Behzad Surface Integrity and Tool Wear in Milling Process Using Minimum Quantity Lubrication and Dry Techniques on 304L Steel [Volume 24, Issue 3, 2024, Pages 131-140]
Jafarian, Farshid An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2024, Pages 363-371]
Jahangiri, Mohammad Ali Topology Optimization of Structure in the Fluid-Structure Interaction Problem using the Level Set Method [Volume 24, Issue 8, 2024, Pages 485-498]
Jahedi, Reza Polymer Gear Fault Detection Based on Audio Signal and Wavelet Packet Transform [Volume 24, Issue 6, 2024, Pages 351-362]
Javadi Sigaroodi, Mohammad Rasoul Characterization of hot corrosion performance and TGO behavior in APS-BC and HVOF-BC thermal barrier coatings [Volume 24, Issue 2, 2024, Pages 87-95]
K
Karafi, Mohammad Reza Multi-Mode Bulk Magnetostrictive Actuator for Precision Positioning system [Volume 24, Issue 9, 2024, Pages 575-581]
Karamooz Mahdiabadi, Morteza Passive Vibration Control of a Nonlinear Rotating Beam Using a Nonlinear Vibration Absorber and Stability Analysis [Volume 24, Issue 10, 2024, Pages 643-655]
Kazemi nasrabadi, Mohammad The Effect Of Machining Strategies On The Surface Roughness And Milling Time Of Part With Convex, Concave, And Smooth Surfaces [Volume 24, Issue 3, 2024, Pages 189-201]
Keikhaei, Mohammad Javad Numerical Investigation of Fluid Flow in the Cathode Side of Polymer Membrane Fuel Cell with Foam-Based Distributor with Non-Uniform Porosity [Volume 24, Issue 6, 2024, Pages 373-383]
Kermani, Mohammad Jafar Numerical Investigation of Fluid Flow in the Cathode Side of Polymer Membrane Fuel Cell with Foam-Based Distributor with Non-Uniform Porosity [Volume 24, Issue 6, 2024, Pages 373-383]
Keymasi Khalaji, Ali Motion Planning in Critical Lane Change Maneuvers Considering the Stability Margins of the Vehicle [Volume 24, Issue 4, 2024, Pages 225-238]
Keymasi-Khalaji, Ali Nonlinear tracking control of wheeled mobile robots with input constraints [Volume 24, Issue 10, 2024, Pages 621-630]
Khalili, Maryam The effect of copper content on the wear resistance of MMC composites (Fe-C-Cu-SiC) [Volume 24, Issue 9, 2024, Pages 597-609]
Kharazmi, Shahaboddin The effects of resonance volume of air manifold of EC5 gasoline engine on its performance [Volume 24, Issue 9, 2024, Pages 567-573]
Khodaeipour, Behrooz Numerical and Experimental Study of Damage in Multi-Compartment Armor due to UNDEX [Volume 24, Issue 8, 2024, Pages 499-509]
Khodarahmi, Hossein Numerical and Experimental Study of Damage in Multi-Compartment Armor due to UNDEX [Volume 24, Issue 8, 2024, Pages 499-509]
Khorami, Samane Investigation of Behavior and Failure Mechanism of Welding ST52 Steel Structures at Negative Temperature [Volume 24, Issue 8, 2024, Pages 533-543]
Kiani, Mehrdad Kinetic and Thermodynamic Study of the Combustion Characteristics of the Combination of Ammonia Fuel with Waste Gas at Elevated Pressures [Volume 24, Issue 3, 2024, Pages 153-164]
Kurd, Reza Experimental study of the effect of using phase change material to improve electrical insulation of power distribution transformers [Volume 24, Issue 1, 2023, Pages 21-30]
L
Lohrasbi, Sajjad The Effect of Cold Pre-Strain on the Tensile and Compressive Strength of Inconel 718 Superalloy Produced by Selective Laser Melting [Volume 24, Issue 8, 2024, Pages 475-484]
M
Mahdavipanah, Ahmadreza Introducing a New Online Algorithm to Detect The Type of Surface in The Anti-lock Braking System [Volume 24, Issue 5, 2024, Pages 305-315]
Mahian, omid Evaluation of solar steam generation under convective flow in a cylindrical structure with nature inspired water distribution [Volume 24, Issue 9, 2024, Pages 545-555]
Majeed Karam, Nuha Experimental study of the effect of using phase change material to improve electrical insulation of power distribution transformers [Volume 24, Issue 1, 2023, Pages 21-30]
Majnuoni, Omid Analysis of Liquid Gas (LPG) Storage Tank Explosion in a Road Vehicle due to the Boiling Liquid Vapor Phenomenon (BLEVE) [Volume 24, Issue 7, 2024, Pages 421-431]
Maleki, Mohammad Erfan Numerical Investigation of Fluid Flow in the Cathode Side of Polymer Membrane Fuel Cell with Foam-Based Distributor with Non-Uniform Porosity [Volume 24, Issue 6, 2024, Pages 373-383]
Manafi, Davood Evolution of The Conventional Rotary Forging Machines to Six-DoF Parallel Kinematics Machines [Volume 24, Issue 10, 2024, Pages 611-619]
Mansouri Selvanagh, Hami Numerical Simulation of Single Slope Solar Still with Setting Rectangular, Triangular and Wavy Barriers on the Side Walls [Volume 24, Issue 2, 2024, Pages 97-110]
Mazidi Sharfabadi, Mohammad Experimental study of the effect of using phase change material to improve electrical insulation of power distribution transformers [Volume 24, Issue 1, 2023, Pages 21-30]
Mehrabi gohari, Ehsan Investigation of Behavior and Failure Mechanism of Welding ST52 Steel Structures at Negative Temperature [Volume 24, Issue 8, 2024, Pages 533-543]
Mirsajedi, Seyyed mahdi 3D Simulation of the Annular Combustion Chamber of a Micro-Turbine with Hydrogen-Methane Mixture and Partially Premixed Combustion Model [Volume 24, Issue 12, 2024, Pages 727-738]
Mirtabaei, seyed Mostafa Investigating the performance of hydroxy gas producing electrolyzer using solar cells [Volume 24, Issue 1, 2023, Pages 41-52]
Moein Jahromi, Mahbod Numerical Investigation of Fluid Flow in the Cathode Side of Polymer Membrane Fuel Cell with Foam-Based Distributor with Non-Uniform Porosity [Volume 24, Issue 6, 2024, Pages 373-383]
Moghimi, Mahdi Energy and Exergy Analysis of a Direct Absorption Parabolic Solar Collector Enhanced with Multi-Walled Carbon Nanotubes and Titanium Dioxide Nanoparticles [Volume 24, Issue 6, 2024, Pages 385-397]
Mohaghegh, Saeed An experimental investigation on the effect of ambient temperature on the performance of a vertical air curtain refrigerator [Volume 24, Issue 9, 2024, Pages 583-595]
Mohammadi, Mohsen Introducing a New Online Algorithm to Detect The Type of Surface in The Anti-lock Braking System [Volume 24, Issue 5, 2024, Pages 305-315]
Mohammadian, Esmaeil Process and Macrostructural Analysis of Copper Tube Bonding to Carbon Fiber Composite Tube by Electromagnetic Joining Process [Volume 24, Issue 2, 2024, Pages 65-75]
Montakhabi, Farzam Characterization of hot corrosion performance and TGO behavior in APS-BC and HVOF-BC thermal barrier coatings [Volume 24, Issue 2, 2024, Pages 87-95]
Moradi, Amir Hossein Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2024, Pages 631-641]
Morakabati, Maryam Determination Workability of The Novel Ti-3Al-8Mo-7V-3Cr Titanium Alloy via Ductilty Evaluation in Two-Phase Alpha-Beta and Single-Phase Beta Regions [Volume 24, Issue 2, 2024, Pages 111-118]
N
Najar, Mosayeb Experimental Investigation on the Energy Absorption of Lattice Thin-Walled Metal Tubes with Auxetic, Semi-Re-Entrant, and Conventional Honeycomb Cells under Axial Loading [Volume 24, Issue 5, 2024, Pages 293-303]
Nakhodchi, Soheil Experimental and Analytical Investigation on Stress Relaxation Behavior of IN718 Superalloy Made by Selective Laser Melting Method Subjected to Variable Initial Strains [Volume 24, Issue 1, 2023, Pages 1-9]
Nakhodchi, Soheil Thermal Analysis and Microstructural Changes in Plasma Welding Process Inconel718 Fabricated by Selective Laser Melting [Volume 24, Issue 2, 2024, Pages 77-86]
Nakhodchi, Soheil The Effect of Cold Pre-Strain on the Tensile and Compressive Strength of Inconel 718 Superalloy Produced by Selective Laser Melting [Volume 24, Issue 8, 2024, Pages 475-484]
Nasirbaghban, Kobra Comprehensive Investigation of Effects of Environmental Parameters on Shallow Water Sound Propagation [Volume 24, Issue 7, 2024, Pages 467-474]
Nategh, Mohammad Javad Evolution of The Conventional Rotary Forging Machines to Six-DoF Parallel Kinematics Machines [Volume 24, Issue 10, 2024, Pages 611-619]
Nazari Googli, Shahin The Effect Of Machining Strategies On The Surface Roughness And Milling Time Of Part With Convex, Concave, And Smooth Surfaces [Volume 24, Issue 3, 2024, Pages 189-201]
Noei, Nima Topology Optimization of Structure in the Fluid-Structure Interaction Problem using the Level Set Method [Volume 24, Issue 8, 2024, Pages 485-498]
Nourbakhsh, Sayed Hassan Experimental Assessment of Ductile and Shear Fracture Criteria in Stainless Steel 304 According to Hooputra Model [Volume 24, Issue 12, 2024, Pages 709-716]
Nourouzi, Salman Process and Macrostructural Analysis of Copper Tube Bonding to Carbon Fiber Composite Tube by Electromagnetic Joining Process [Volume 24, Issue 2, 2024, Pages 65-75]
P
Pourrezakhader, Fatemeh Design and Fabrication of a Bistable Microfluidic Paper-Based Transistor [Volume 24, Issue 10, 2024, Pages 667-675]
Poursaeidi, Esmaeil Characterization of hot corrosion performance and TGO behavior in APS-BC and HVOF-BC thermal barrier coatings [Volume 24, Issue 2, 2024, Pages 87-95]
R
Rahmatian, Mona Steady-State and Transient Modeling of a Dye-Sensitized Solar Cell under Indoor Conditions Based on Sensitivity Analysis [Volume 24, Issue 7, 2024, Pages 443-453]
Ranjbar, Amir Hossein Surface Integrity and Tool Wear in Milling Process Using Minimum Quantity Lubrication and Dry Techniques on 304L Steel [Volume 24, Issue 3, 2024, Pages 131-140]
Rashidi, Ali Mohammad Effects of austenitizing type on machinability of austempered ductile irons with dual matrix structure [Volume 24, Issue 8, 2024, Pages 523-531]
Rasti, Amir Study of Surface Roughness, Topography, and Cutting Forces in Finish Turning of 1.1191 Hardened Steel Using Textured Cutting Tool [Volume 24, Issue 1, 2023, Pages 31-40]
Rezaee, Mohammad Comprehensive Investigation of Effects of Environmental Parameters on Shallow Water Sound Propagation [Volume 24, Issue 7, 2024, Pages 467-474]
Rezaee Hajideh, Mojtaba Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2024, Pages 717-726]
Rezaei, Seyed Mahdi Design, Fabrication, and Experimental Modeling of a Piezoelectric-Based Droplet Injection System Using Statistical Methods [Volume 24, Issue 10, 2024, Pages 657-666]
Rezaei, Seyed Mehdi Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2024, Pages 631-641]
S
Saadatbakhsh, Mohammad Development and Evaluation a Model to Calculate the Skin Friction Coefficient and the Friction Drag Reduction of a Superhydrophobic Flat Plate [Volume 24, Issue 5, 2024, Pages 281-291]
Saadatfard, Mohammad Masih Polymer Gear Fault Detection Based on Audio Signal and Wavelet Packet Transform [Volume 24, Issue 6, 2024, Pages 351-362]
Sabzalipour, Mohsen Effects of austenitizing type on machinability of austempered ductile irons with dual matrix structure [Volume 24, Issue 8, 2024, Pages 523-531]
Sadeghi, Mohammad Hossein Study of Surface Roughness, Topography, and Cutting Forces in Finish Turning of 1.1191 Hardened Steel Using Textured Cutting Tool [Volume 24, Issue 1, 2023, Pages 31-40]
Sadeghi Ahangar, Ashkan Effect of Water-Methanol Mixture Injection in Intake Manifold on Performance and Emission of a Turbocharged SI Engine [Volume 24, Issue 12, 2024, Pages 677-686]
Sadeghzadeh, Sadegh Development and Evaluation a Model to Calculate the Skin Friction Coefficient and the Friction Drag Reduction of a Superhydrophobic Flat Plate [Volume 24, Issue 5, 2024, Pages 281-291]
Sadr, Mohsen Study of Surface Roughness, Topography, and Cutting Forces in Finish Turning of 1.1191 Hardened Steel Using Textured Cutting Tool [Volume 24, Issue 1, 2023, Pages 31-40]
Safarabadi, Majid Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2024, Pages 717-726]
Saffarian, Mohammad Reza An experimental investigation on the effect of ambient temperature on the performance of a vertical air curtain refrigerator [Volume 24, Issue 9, 2024, Pages 583-595]
Safi Jahanshahi, Amin Experimental Investigation of the Effect of Annealing and Printing Parameters on the Compressive Strength and Modulus of 3D Printed Porous Structures with Interconnected Pores Made of Polylactic Acid by Fused Deposition Modeling Process. [Volume 24, Issue 4, 2024, Pages 251-258]
Salmasi, Hadi Thermal Analysis and Microstructural Changes in Plasma Welding Process Inconel718 Fabricated by Selective Laser Melting [Volume 24, Issue 2, 2024, Pages 77-86]
Saremi Tehrani, Mohammad Reza Numerical Stability Enhancement of Lattice Boltzmann Method in The Simulation of Incompressible Flows with Higher Reynolds Numbers [Volume 24, Issue 3, 2024, Pages 177-188]
Sarkhosh, Reza The Effect Of Machining Strategies On The Surface Roughness And Milling Time Of Part With Convex, Concave, And Smooth Surfaces [Volume 24, Issue 3, 2024, Pages 189-201]
Sayyaadi, Hoseyn Steady-State and Transient Modeling of a Dye-Sensitized Solar Cell under Indoor Conditions Based on Sensitivity Analysis [Volume 24, Issue 7, 2024, Pages 443-453]
Sazgar, hadi Motion Planning in Critical Lane Change Maneuvers Considering the Stability Margins of the Vehicle [Volume 24, Issue 4, 2024, Pages 225-238]
Sazgar, Hadi Nonlinear tracking control of wheeled mobile robots with input constraints [Volume 24, Issue 10, 2024, Pages 621-630]
Shahdad, Iman Energy and Exergy Analysis of a Direct Absorption Parabolic Solar Collector Enhanced with Multi-Walled Carbon Nanotubes and Titanium Dioxide Nanoparticles [Volume 24, Issue 6, 2024, Pages 385-397]
Shahraki shahdabadi, Reza Investigating the performance of hydroxy gas producing electrolyzer using solar cells [Volume 24, Issue 1, 2023, Pages 41-52]
Shakarami, Kiumars Thermal Analysis and Microstructural Changes in Plasma Welding Process Inconel718 Fabricated by Selective Laser Melting [Volume 24, Issue 2, 2024, Pages 77-86]
Shakibaei, Mehran Analysis of Liquid Gas (LPG) Storage Tank Explosion in a Road Vehicle due to the Boiling Liquid Vapor Phenomenon (BLEVE) [Volume 24, Issue 7, 2024, Pages 421-431]
Shamekhi, Amir Hossein Effect of Water-Methanol Mixture Injection in Intake Manifold on Performance and Emission of a Turbocharged SI Engine [Volume 24, Issue 12, 2024, Pages 677-686]
Sheikhzadeh, Ghanbar Ali Analysis of Liquid Gas (LPG) Storage Tank Explosion in a Road Vehicle due to the Boiling Liquid Vapor Phenomenon (BLEVE) [Volume 24, Issue 7, 2024, Pages 421-431]
Shirzad, Mohammad Evaluation of hydrodynamic parameters in vortex-induced vibration of cylindrical structures with nonlinear support [Volume 24, Issue 9, 2024, Pages 557-566]
Sobhani, Masoud Experimental Study of the Performance of the Solar Still with Sliding Absorber Plate and Equipped with a Wave Maker [Volume 24, Issue 3, 2024, Pages 165-176]
Sohrabi, Aref 3D Simulation of the Annular Combustion Chamber of a Micro-Turbine with Hydrogen-Methane Mixture and Partially Premixed Combustion Model [Volume 24, Issue 12, 2024, Pages 727-738]
Solki, Ehsan Comprehensive Investigation of Effects of Environmental Parameters on Shallow Water Sound Propagation [Volume 24, Issue 7, 2024, Pages 467-474]
T
Tajoddin, Aria Surface Integrity and Tool Wear in Milling Process Using Minimum Quantity Lubrication and Dry Techniques on 304L Steel [Volume 24, Issue 3, 2024, Pages 131-140]
Tangsiri, Ali Passive Vibration Control of a Nonlinear Rotating Beam Using a Nonlinear Vibration Absorber and Stability Analysis [Volume 24, Issue 10, 2024, Pages 643-655]
Tavallali, Mohammad Sadegh Polymer Gear Fault Detection Based on Audio Signal and Wavelet Packet Transform [Volume 24, Issue 6, 2024, Pages 351-362]
Tavid, Mohammad Experimental Investigation of Fatigue Behavior and Assessment of Stress-Life Curve of API X65 Steel [Volume 24, Issue 5, 2024, Pages 317-327]
V
Vaghefi, Mahsa Polymer Gear Fault Detection Based on Audio Signal and Wavelet Packet Transform [Volume 24, Issue 6, 2024, Pages 351-362]
Y
Yazdani Khameneh, Mohammad Study of Surface Roughness, Topography, and Cutting Forces in Finish Turning of 1.1191 Hardened Steel Using Textured Cutting Tool [Volume 24, Issue 1, 2023, Pages 31-40]
Yekani Motlagh, Saber Numerical Simulation of Single Slope Solar Still with Setting Rectangular, Triangular and Wavy Barriers on the Side Walls [Volume 24, Issue 2, 2024, Pages 97-110]
Younesi, Mohammad Investigating the Fluctuating Nature of Flow in the Hartmann-Sprenger Tube [Volume 24, Issue 6, 2024, Pages 341-349]
Z
Zanganeh, Reza Experimental Investigation of the Effect of Annealing and Printing Parameters on the Compressive Strength and Modulus of 3D Printed Porous Structures with Interconnected Pores Made of Polylactic Acid by Fused Deposition Modeling Process. [Volume 24, Issue 4, 2024, Pages 251-258]
Zareinejad, Mohammad Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2024, Pages 631-641]
Zarezadeh Mehrizi, Mohammad Amin Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2024, Pages 717-726]
Zarhoon, Alireza Evolution of The Conventional Rotary Forging Machines to Six-DoF Parallel Kinematics Machines [Volume 24, Issue 10, 2024, Pages 611-619]
Zia shamami, Mojtaba Numerical and Experimental Study of Damage in Multi-Compartment Armor due to UNDEX [Volume 24, Issue 8, 2024, Pages 499-509]
