Volume 18, Issue 3 (2018)                   Modares Mechanical Engineering 2018, 18(3): 302-310 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ramezanizadeh M, Pouladrang Y. Experimental Investigation of Film Cooling Effectiveness Applying a Novel Integrated Compound Jets Design for the Jet Holes. Modares Mechanical Engineering. 2018; 18 (3) :302-310
URL: http://mme.modares.ac.ir/article-15-10758-en.html
1- Aerospace Engineering Department, Shahid Sattari Aeronautical University of Science and Technology
2- Graduate Center, Shahid sattari Aeronautical University of Science and Technology, Tehran, I.R. Iran
Abstract:   (3158 Views)
Several factors such as shape of the jet hole, blowing ratio, density ratio, mainstream turbulence intensity, and …, affect the film cooling effectiveness. Among the above mentioned factors, the film cooling effectiveness is strongly influenced by the shape of the jet hole. This geometry should be designed in such a way to minimize the jet's vertical momentum and produce more surface coverage. In this research, cooling performance of a novel integrated compound (earring) jets design is investigated experimentally, using an infrared thermography method. Steady state heat transfer experiments at the jet Reynolds number of 10,000 (based on the jet diameter) are performed over the test plate. The jets injection angle into the mainflow are considered to be 30 degrees relative to the surface. The measurements are carried out at the mainstream speed of 27 m/s and at four different blowing ratios of 0.4, 0.5, 0.7, and 0.8. The obtained results show that at constant jets cross section, the earing jets geometry leads to higher film cooling effectiveness, compared to the cylindrical hole geometry. Optimum blowing ratio is 0.8 and the lowest effectiveness is obtained on the surface at the blowing ratio of 0.4. The flow structures which are introduced by this novel geometry, reduces the flow mixing between the mainstream and the cooling jets. Therefore, enhances the film cooling effectiveness and the coolant fluid more uniformly distributes over the surface laterally.
Full-Text [PDF 1141 kb]   (2101 Downloads)    
Article Type: Research Article | Subject: Experimental Fluid Mechanics & Heat Transfer
Received: 2017/12/1 | Accepted: 2018/02/7 | Published: 2018/03/2

Add your comments about this article : Your username or Email: