Volume 19, Issue 11 (2019)                   Modares Mechanical Engineering 2019, 19(11): 2803-2810 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hojjat Y, Ghavami Namin B. Introduction, Simulation and Experimental Investigation of a Planar Positioner Based on Permanent Magnet Linear Synchronous Motor Technology. Modares Mechanical Engineering. 2019; 19 (11) :2803-2810
URL: http://mme.modares.ac.ir/article-15-22404-en.html
1- Manufacturing Engineering Department, Faculty of Mechanical Engineering, Tarbiat Modares University , yhojjat@modares.ac.ir
2- Applied Design Department, Faculty of Mechanical Engineering, Tarbiat Modares University
Abstract:   (2174 Views)
The aim of this research is to design and fabricate an actuator, which operates based on reaction forces between current carrying stator coils and magnetic arrays (Halbach arrays) connected to the mover, in order to move a motion stage for positioning objects. Thus, according to the initial and intended position of the mover, current commutation in stator coils is changed in a way that required force for transporting the mover to the desired position is provided. In this research, the integration of two perpendicular synchronous linear motors is utilized in order to create the planar motion. The stator consists of two sets of rectangular coils, which are placed perpendicular to each other. Mover consists of four Halbach arrays, which two Halbach arrays are used for x-axis motion and the other two arrays are used for y-axis motion. First, the analytic relationship between the applied magnetic force and current commutation was introduced. Then, the design parameters such as mover dimensions and stator workspace were determined. Concerning these parameters, dimensions of cubic magnets for Halbach array fabrication were obtained and with respect to array dimensions, the dimensions and number of turns for stator coils were determined. Using these design parameters and commutation equations, the planar motion of the actuator was simulated. The simulation results showed good agreement with the analytical results. Experimental tests were conducted in order to investigate the positioning capabilities and 2 dimensional motion. The precision of the fabricated actuator is 5mm and the minimum response time of actuator is 0.5sec. The minimum position error occurs at 25mm position that is due to the closeness to motor magnetic period.
Full-Text [PDF 1386 kb]   (310 Downloads)    
Article Type: Original Research | Subject: Mechatronics
Received: 2019/06/24 | Accepted: 2019/05/26 | Published: 2019/11/21

1. Lu X, Usman I. 6D Direct-drive technology for planar motion stages. CIRP Annals. 2012;61(1):359-362. [Link] [DOI:10.1016/j.cirp.2012.03.145]
2. Sawyer BA. Magnetic positioning device. US Patent. 1968;(3376578):1-2. [Link]
3. Compter IrJC. Electro-dynamic planar motor. Precision Engineering. 2004;28(2):171-180. [Link] [DOI:10.1016/j.precisioneng.2003.08.002]
4. Kim WJ, Trumper DL. High-precision magnetic levitation stage for photolithography. Precision Engineering. 1998;22(2):66-77. [Link] [DOI:10.1016/S0141-6359(98)00009-9]
5. Gieras JF. Linear synchronous motors: transportation and automation. 2nd Edition. Boca Raton: CRC press; 2012. p. 155. [Link]
6. de Boeij J, Lomonova E, Vandenput A. Modeling ironless permanent-magnet planar actuator structures. IEEE Transactions on Magnetics. 2006;42(8):2009-2016. [Link] [DOI:10.1109/TMAG.2006.877712]
7. Jansen JW, van Lierop CMM, Lomonova EA, Vandenput AJA. Magnetically levitated planar actuator with moving magnets. IEEE Transactions on Industry Applications. 2008;44(4):1108-1115. [Link] [DOI:10.1109/TIA.2008.926065]
8. Kim WJ, Trumper DL, Lang JH. Modeling and vector control of a planar magnetic levitator. IEEE Transactions on Industry Applications. 1998;34(6):1254-1262. [Link] [DOI:10.1109/28.738999]
9. Jung KS, Baek YS. Study on a novel contact-free planar system using direct drive DC coils and permanent magnet. IEEE/ASME Transaction in Mechatronics. 2002;7(1):35-43. [Link] [DOI:10.1109/3516.990885]
10. Zhang S, Dang X, Wang K, Huang J, Yang J, Zhang G. An analytical approach to determine coil thickness for magnetically levitated planar motors. IEEE/ASME Transactions on Mechatronics. 2017;22(1):572-580. [Link] [DOI:10.1109/TMECH.2016.2631571]

Add your comments about this article : Your username or Email:

Send email to the article author