Volume 19, Issue 8 (August 2019)                   Modares Mechanical Engineering 2019, 19(8): 2047-2055 | Back to browse issues page

XML Persian Abstract Print


1- Department of Mechatronics Engineering, Faculty of Mechanical And Mechatronics Engineering, Shahrood University of Technology, Shahrood, Iran , varedi@shahroodut.ac.ir
2- Department of Mechatronics Engineering, Faculty of Mechanical And Mechatronics Engineering, Shahrood University of Technology, Shahrood, Iran
Abstract:   (4878 Views)
Bistable mechanisms have two distinct stable positions that can move from one of these situations to other by a small stimulus. These stable positions, as well as the movement between them, have increased the use of these mechanisms in devices such as valves, switches, and etc. This bistable behavior is the result of the storage and release of the potential energy. Therefore, it is obvious that these mechanisms must have one or more flexible links or joints. In this paper, flexible members are modeled, using torsional springs based on the pseudo-rigid-body-model (PRBM). The existence of one flexible member is sufficient for bi-stability of the four-bar linkage. However, with changing the location of this flexible member as the input, the output, or the coupler link (or changing the location of equivalent torsional spring), various conditions are generated for the design of a four-bar linkage, which is discussed in this study. The results show that in all cases (the crank-crank, the crank-rocker, the rocker-crank, and the rocker-rocker), the equivalent torsion spring should not be connected to a smaller link in order to create a bistable four-bar linkage.
Full-Text [PDF 1631 kb]   (3298 Downloads)    
Article Type: Original Research | Subject: Kinematics & Mechanisms
Received: 2018/08/15 | Accepted: 2019/01/29 | Published: 2019/08/12

References
1. Falahian M, Daniali HM, Varedi SM. Optimization of H4 parallel manipulator using genetic algorithm. In: Küçük S, editor. Serial and parallel robot manipulators-kinematics, dynamics, control and optimization. London: IntechOpen; 2012. pp. 401-416. [Link] [DOI:10.5772/32428]
2. Varedi Koulaei SM, Daniali HM, Farajtabar M, Fathi B, Shafiee Ashtiani M. Reducing the undesirable effects of joints clearance on the behavior of the planar 3-RRR parallel manipulators. Nonlinear Dynamics. 2016;86(2):1007-1022. [Link] [DOI:10.1007/s11071-016-2942-7]
3. Varedi Koulaei SM, Daniali HM, Domiri Ganji D. Kinematics of an offset 3-UPU translational parallel manipulator by the homotopy continuation method. Nonlinear Analysis Real World Applications. 2009;10(3):1767-1774. [Link] [DOI:10.1016/j.nonrwa.2008.02.014]
4. Jensen BD, Howell LL. Identification of compliant pseudo-rigid-body four-link mechanism configurations resulting in bistable behavior. Journal of Mechanical Design. 2004;125(4):701-708. [Link] [DOI:10.1115/1.1625399]
5. Howell LL. Compliant mechanisms. New York: John Wiley & Sons; 2001. [Link]
6. Pucheta MA, Cardona A. Design of bistable compliant mechanisms using precision-position and rigid-body replacement methods. Mechanism and Machine Theory. 2010;45(2):304-326. [Link] [DOI:10.1016/j.mechmachtheory.2009.09.009]
7. Parlaktaş V, Tanık E. Single piece compliant spatial slider-crank mechanism. Mechanism and Machine Theory. 2014;81:1-10. [Link] [DOI:10.1016/j.mechmachtheory.2014.06.007]
8. Pei X, Yu J. ADLIF: A new large-displacement beam-based flexure joint. Mechanical Sciences. 2011;2:183-188. [Link] [DOI:10.5194/ms-2-183-2011]
9. Rezaei A, Akbarzadeh AR. Influence of joints flexibility on overall stiffness of a 3-PRUP compliant parallel manipulator. Mechanism and Machine Theory. 2018;126:108-140. [Link] [DOI:10.1016/j.mechmachtheory.2018.03.011]
10. Oh Y. Synthesis of multistable equilibrium compliant mechanisms [Dissertation]. Ann Arbor: University of Michigan; 2008. [Link]
11. Howell LL, Rao SS, Midha A. Reliability-based optimal design of a bistable compliant mechanism. Journal of Mechanical Design. 1994;116(4):1115-1121. [Link] [DOI:10.1115/1.2919495]
12. Jensen BD, Howell LL, Salmon LG. Design of two-link, in-plane, bistable compliant micro-mechanisms. Journal of Mechanical Design. 1999;121(3):416-423. [Link] [DOI:10.1115/1.2829477]
13. Chen G, Gou Y, Zhang A. Synthesis of compliant multistable mechanisms through use of a single bistable mechanism. Journal of Mechanical Design. 2011;133(8):081007. [Link] [DOI:10.1115/1.4004543]
14. Masters ND, Howell LL. A self-retracting fully compliant bistable micromechanism. Journal of Microelectromechanical Systems. 2003;12(3):273-280. [Link] [DOI:10.1109/JMEMS.2003.811751]
15. Jensen BD. Identification of macro- and micro-compliant mechanism configurations resulting in bistable behavior [Dissertation]. Provo UT: Brigham Young University; 2003. [Link] [DOI:10.1115/1.1625399]
16. Fazal I, Elwenspoek MC. Design and analysis of a high pressure piezoelectric actuated microvalve. Journal of Micromechanics and Microengineering. 2007;17(11):2366. [Link] [DOI:10.1088/0960-1317/17/11/026]
17. Schomburg WK, Goll C. Design optimization of bistable microdiaphragm valves. Sensors and Actuators A Physical. 1998;64(3):259-264. [Link] [DOI:10.1016/S0924-4247(97)01612-9]
18. Yang B, Wang B, Schomburg WK. A thermopneumatically actuated bistable microvalve. Journal of Micromechanics and Microengineering. 2010;20(9):095024. [Link] [DOI:10.1088/0960-1317/20/9/095024]
19. Baker MS, Howell LL. On-chip actuation of an in-plane compliant bistable micromechanism. Journal of Microelectromechanical Systems. 2002;11(5):566-573. [Link] [DOI:10.1109/JMEMS.2002.803284]
20. Howell LL, Midha A. Parametric deflection approximations for end-loaded, large-deflection beams in compliant mechanisms. Journal of Mechanical Design. 1995;117(1):156-165. [Link] [DOI:10.1115/1.2826101]
21. Howell LL, Midha A, Norton TW. Evaluation of equivalent spring stiffness for use in a pseudo-rigid-body model of large-deflection compliant mechanisms. Journal of Mechanical Design. 1996;118(1):126-131. [Link] [DOI:10.1115/1.2826843]

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.