Volume 16, Issue 12 (2-2017)
Modares Mechanical Engineering 2017, 16(12): 779-782 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mafi M, Shomali M, Ajorloo H. A feasibility study on substitution of environmentally friendly refrigerants in common refrigeration systems. Modares Mechanical Engineering 2017; 16 (12) :779-782
URL: http://mme.modares.ac.ir/article-15-310-en.html
URL: http://mme.modares.ac.ir/article-15-310-en.html
Abstract: (4751 Views)
In the recent decades, due to environmental sustainability, abundance, availability and appropriate thermo-physical properties, natural refrigerants are being considered with potential of substitute refrigerants. In this study, Propylene (R1270), Propane (R290), Isobutane (R600a), R407c, R410a, R12, R22 and R134a have been investigated as refrigerant in common refrigeration systems. In the case studies, the thermodynamic and technical parameters of the cycle, using above mentioned refrigerants, have been investigated for common refrigeration systems in temperature range of -30°C to 10°C in the evaporator, and also for heat pump systems with a temperature range of 45°C to 60°C in the condenser. Finally, Propylene was introduced as a refrigerant to replace with synthetic refrigerants in the above mentioned temperature ranges in common refrigeration cycles.
Keywords: Environmentally Friendly Refrigerants, Substitute Refrigerant, Common Refrigeration System, Heat pump
Article Type: Research Note |
Subject:
Plumbing & Air Conditioning
Received: 2016/09/24 | Accepted: 2016/10/15 | Published: 2016/11/23
Received: 2016/09/24 | Accepted: 2016/10/15 | Published: 2016/11/23
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |