Volume 21, Issue 1 (January 2021)                   Modares Mechanical Engineering 2021, 21(1): 11-18 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

farshid@um.ac.ir. Investigation into Effective Parameters on the Kerf Width of Stainless Steel 316 with Analysis of Variance in Fiber Laser Cutting Process. Modares Mechanical Engineering. 2021; 21 (1) :11-18
URL: http://mme.modares.ac.ir/article-15-49385-en.html
Abstract:   (388 Views)
Kerf width (cutting width) is an important quality parameter in the laser cutting process, and if it is less, means higher cutting accuracy and lower cost of materials. In this study, using a fiber laser-cutting machine, which is one of the new generation lasers, the effect of all parameters affecting the kerf width has been investigated. These parameters include laser power (450 to 750 watts), cutting speed (30 to 130 mm/s), focal point position (5 to +5 mm), nozzle standoff (0.6 to 2.5 mm) and gas pressure (1.2 to 1.8 bar), for the cut of stainless steel 316L sheet with a thickness of 0.8 mm. After measuring the kerf width with a special imaging system and analyzing the results with ANOVA, it was found that laser power and gas pressure were directly related to the kerf width and the cutting speed and nozzle standoff were inversely related to the kerf width. Laser focal point position was also determined as the most effective parameter in the formation of the kerf width, which should be on the surface to minimize the kerf width. In this study, it was shown that with the correct adjustment of the parameters, material consumption and cutting accuracy are improved up to 70%. In addition, by using linear regression, the model of kerf width changes with respect to various parameters has been obtained and by comparing its response with the experimental results, acceptable model accuracy has been observed.
Full-Text [PDF 1925 kb]   (112 Downloads)    
Article Type: Original Research | Subject: Impact Mechanics
Received: 2021/01/21 | Accepted: 2021/01/19 | Published: 2021/01/19

1. Moradi M, Ashoori A, Hasani A. Additive manufacturing of stellite 6 superalloy by direct laser metal deposition–Part 1: Effects of laser power and focal plane position. Optics & Laser Technology. 2020:106328.
2. Chen H, Lu Y, Luo D, Lai J, Liu D. Epitaxial laser deposition of single crystal Ni-based superalloys: repair of complex geometry. Journal of Materials Processing Technology. 2020:116782
3. Safari M. A study on the laser tube bending process: Effects of the irradiating length and the number of irradiating passes. Iranian Journal of Materials Forming. 2020;7(1):46-53
4. Safari M, Alves de Sousa R, Joudaki J. Fabrication of saddle-shaped surfaces by a laser forming process: An experimental and statistical investigation. Metals. 2020;10(7):883.
5. Mostaan H, Shamanian M, Hasani S, Safari M, Szpunar JA. Nd: YAG laser micro-welding of ultra-thin FeCo–V magnetic alloy: optimization of weld strength. Transactions of Nonferrous Metals Society of China. 2017;27(8):1735-1746.
6. Trinh LN, Lee D. The Characteristics of Laser Welding of a Thin Aluminum Tab and Steel Battery Case for Lithium-Ion Battery. Metals. 2020;10(6):842.
7. Moradi M, Arabi H, Nasab SJ, Benyounis KY. A comparative study of laser surface hardening of AISI 410 and 420 martensitic stainless steels by using diode laser. Optics & Laser Technology. 2019;111:347-357
8. Steen WM, Mazumder J. Laser material processing. springer science & business media; 2010.
9. Ion J. Laser processing of engineering materials: principles, procedure and industrial application. Elsevier; 2005.
10. Hashemzadeh M. Investigations into fibre laser cutting (Doctoral dissertation, University of Nottingham).
11. Dong L, Samson B. Fiber Lasers: Basics, Technology, and Applications. Crc Press; 2016.
12. https://www.esabna.com/us/en/education/blog/what-is-cutting-kerf.cfm.
13. Stelzer S, Mahrle A, Wetzig A, Beyer E. Experimental investigations on fusion cutting stainless steel with fiber and CO2 laser beams. Physics Procedia. 2013;41:399-404.
14. Caristan CL. Laser cutting guide for manufacturing. Society of manufacturing engineers; 2004.
15. Ghany KA, Newishy M. Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CW Nd: YAG laser. Journal of Materials Processing Technology. 2005;168(3):438-447

Add your comments about this article : Your username or Email: