Volume 23, Issue 10 (October 2023)                   Modares Mechanical Engineering 2023, 23(10): 9-13 | Back to browse issues page


XML Persian Abstract Print


1- , m-taheri@araku.ac.ir
Abstract:   (769 Views)
Today, the machining and milling of composites is of great importance; Because composites are used in various sectors and have found great efficiency in various industries. Considering this, in this article, in order to save the cost of milling composites, the effectiveness of various parameters that affect the cutting force and tool wear, including spindle speed (rpm), feed rate (mm/rev), cutting depth (mm) and percentage of sic, has been discussed; To minimize tool wear and cutting force by creating optimal conditions. Performing a sensitivity analysis according to the regression equations of cutting force and tool wear has shown that spindle speed with 63% and the percentage of composite silicon carbide with 22% have the greatest effect on tool wear and depth of cut with 47% and advance with 23% have the greatest effect on cutting force.
Full-Text [PDF 893 kb]   (539 Downloads)    
Article Type: Original Research | Subject: Machining
Received: 2023/12/1 | Accepted: 2023/10/2 | Published: 2023/10/2

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.