Volume 23, Issue 10 (October 2023)                   Modares Mechanical Engineering 2023, 23(10): 89-93 | Back to browse issues page


XML Persian Abstract Print


1- , Sajadmst94@gmail.com
Abstract:   (722 Views)
The ability to predict tool wear during machining is a very important part of diagnosis, which makes it possible to replace the tool at the appropriate time. Therefore, in this research, the artificial neural network approach was used to predict tool wear. First, hardened steel 4140 was turned with uncoated cemented carbide tool TCMW 16T304 H13A and with input parameters including cutting speed, feed rate and machining time in three different levels and with constant cutting depth, and the amount of tool wear was measured. And the experimental test results were used to train and validate the artificial neural network. The optimal neural network architecture was obtained with 3 nodes in the input layer, two hidden layers with 12 and 36 nodes in the first and second hidden layers, and 1 node in the output layer to predict tool wear. The prediction values of the artificial neural network model were compared with the experimental results and the average error percentage of the validation data was calculated as 3.32%.
Full-Text [PDF 543 kb]   (570 Downloads)    
Article Type: Original Research | Subject: Machining
Received: 2023/12/2 | Accepted: 2023/10/2 | Published: 2023/10/2

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.