Modares Mechanical Engineering

C

• C4 Four-dof Parallel Robot Investigating the Effect of Moving Platform Designation on the Work-Space and Efficiency of the C4 Four-Dof Parallel Robot [Volume 22, Issue 10, 2021, Pages 137-144]
• Cable Gravity compensation improvement for a cable-actuated elbow rehabilitation robot using sliding mode control [Volume 15, Issue 11, 2015, Pages 117-126]
• Cable The Effect of Eccentricity on the Nonlinear Galloping of Cables Considering Wind Flow and Support Motion in 1:1 Internal Resonance [Volume 16, Issue 11, 2016, Pages 378-388]
• Cable actuated Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
• Cable actuated Motion analysis of continuum robots structures with cable actuation [Volume 14, Issue 14, 2014, Pages 39-49]
• Cable- Driven Stability measure for a parallel cable driven robot [Volume 13, Issue 10, 2013, Pages 25-34]
• Cable-Driven Determination of Optimal Wrench-closure Configuration of Reconfigurable Cable-driven Parallel Robots to Move on a Given Trajectory [Volume 19, Issue 5, 2019, Pages 1085-1093]
• Cable-driven parallel robots Practical Performance Comparison of Pole placement and Sliding Mode Controller for Position Control of Cable-driven Parallel Robots Using Visual Servoing [Volume 15, Issue 12, 2015, Pages 63-74]
• Cable-driven parallel robots Path planning of cable driven parallel robots in the presence of dynamic obstacles via potential field using computed torque control method [Volume 16, Issue 4, 2016, Pages 109-118]
• Cable robot Improvement of End-effector Orientability Capability in a Serial-parallel Cable Robot [Volume 15, Issue 7, 2015, Pages 336-344]
• Cable robot Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
• Cable robot Dynamic Design and Control of a Cable Driven Rehabilitation Robot with 2 Degrees of Freedom in Transverse Plane [Volume 20, Issue 5, 2020, Pages 1295-1308]
• Cable-Suspended Payload 3-D Dynamic Modeling and Simulation of a Quadrotor Transporting Cable-Suspended Payload Generating Stochastic Forces [Volume 22, Issue 7, 2021, Pages 429-439]
• Cable suspension points Controllable Workspace Generation for a Cable-Driven Rehabilitation Robot using Neural Network and based on patient’s Anthropometric Parameters [Volume 15, Issue 3, 2015, Pages 137-145]
• Cable Suspension System Elimination of Suspension Effects from Measured Modal Properties of a Flexible Structure [Volume 13, Issue 12, 2013, Pages 67-78]
• CAD/CAM Parametric Design and Manufacturing of Precision Forging Dies of Idler Gear of PEUGEOT 405 using CAD/CAM [Volume 8, Issue 1, 2008, Pages 115-127]
• CAESAR II Application of Neuro-Fuzzy Network for Optimizing Steam Pipeline Expansion Loops in Process Industries [Volume 25, Issue 1, 2024, Pages 23-32]
• Calcite Rock Experimental Study of Surfapore Nanofluid Effect on Surface Free Energy of Calcite Rock [Volume 19, Issue 3, 2019, Pages 709-718]
• Calcium Effect of calcium and boron addition on the microstructure and compression properties of AZ91 cast magnesium alloy [Volume 22, Issue 8, 2021, Pages 497-508]
• Calcium Experimental evaluation of the effect of aluminum alloy foam core on the mechanical behavior of sandwich panel [Volume 23, Issue 6, 2022, Pages 379-386]
• Calcium-base absorber Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers [Volume 17, Issue 3, 2017, Pages 425-436]
• Calcium carbonate nanoparticles The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
• Calcium silicate hydrate An investigation on GO-cement nanocomposites performance under the temperature and pressure of oil wells using molecular dynamics method [Volume 17, Issue 11, 2017, Pages 419-428]
• Calculus of variations A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation [Volume 17, Issue 1, 2017, Pages 47-55]
• Calibration A Novel Closed-Loop Calibration of a 5-DOF Robot Manipulator [Volume 12, Issue 1, 2012, Pages 98-105]
• Calibration Using Pure Bending Test in Determination of Residual Stress Calibration Coefficients by Incremental Hole Drilling Method [Volume 11, Issue 1, 2011, Pages 19-27]
• Calibration Design and fabrication of a force-moment measurement system for testing of the models in a water tunnel [Volume 14, Issue 14, 2014, Pages 291-298]
• Calibration Calibration of Weibull Parameters of Local Approach to Fracture by Using Experimental Cleavage Fracture data of Three Point Bending Specimens [Volume 15, Issue 1, 2015, Pages 412-418]
• Calibration Weibull Parameters Transformability of Local Approach to Fracture in Specimens of Different Shapes [Volume 15, Issue 5, 2015, Pages 185-192]
• Calibration Calibration of the 4-Dof Milling Machine Based on Parallel Mechanism [Volume 22, Issue 10, 2021, Pages 155-159]
• Calibration Calibration and error compensation of a 4-DOF milling machine with parallel mechanism [Volume 23, Issue 5, 2022, Pages 317-322]
• Calibration Calibration of Constitutive Models for Pressure-Sensitive Adhesives Based on Experimental Data [Volume 24, Issue 5, 2023, Pages 329-339]
• Calibration Coefficients Applications of the Incremental Hole-Drilling Method for Measurement of Non-Uniform Residual Stresses in Fiber Metal Laminates [Volume 15, Issue 6, 2015, Pages 335-345]
• Calibration Test Prediction of 6061-T6 Aluminum Fracture Behavior Using the Extended GTN Criterion [Volume 22, Issue 7, 2021, Pages 485-496]
• Cam and Follower Modeling elastohydrodynamic lubrication of cam and flat follower mechanism with grease via Multi-grid method [Volume 15, Issue 4, 2015, Pages 41-50]
• CAN-based networked control system Nonlinear Observer and Controller Design for Low Earth Orbit Satellite Attitude Control System over Network [Volume 15, Issue 5, 2015, Pages 49-59]
• Cancer Proposing optimal chemotherapy protocol for cancer treatment with metastasis by using SDRE based optimal control technique [Volume 14, Issue 10, 2014, Pages 139-149]
• Cancer Numerical Investigation of Magnetic Nanoparticles Absorption in Healthy and Cancerous Tissue under the Influence of Non-Uniform Magnetic Field [Volume 15, Issue 12, 2015, Pages 168-174]
• Cancer Digital Droplet Polymerase Chain Reaction Device Using a Microfluidic Chip [Volume 20, Issue 8, 2020, Pages 1943-1950]
• Cancerous Tumor Fuzzy Control for Drug Delivery in Cancerous Tumors Chemotherapy [Volume 19, Issue 6, 2019, Pages 1467-1473]
• Canonical Correlation Analysis Processing of Ambient Vibration Results using Stochastic Subspace Identification based on Canonical Correlation Analysis [Volume 15, Issue 7, 2015, Pages 107-118]
• Canopy geometry Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
• Cantilever Dynamic Modeling and simulation of nano particle motion in different environments using AFM nano –robot [Volume 15, Issue 1, 2015, Pages 294-300]
• Cantilever Effect of different geometrical parameters of atomic force microscope cantilevers in critical force and time based on manipulation with applying EFAST sensitivity analyses [Volume 15, Issue 1, 2015, Pages 310-316]
• Cantilever beam Vibration analysis of a cantilever beam with piezoelectric layers under aeroelastic force and base excitation [Volume 17, Issue 1, 2017, Pages 221-228]
• Cantilever beam Vibration Analysis of Cantilever Beam With Piezoelectric Layer under Aero-Elastic Force and Moving and Rotating Base Excitation [Volume 20, Issue 4, 2020, Pages 889-900]
• Cantilever Plate Flutter Analysis of CNT-Reinforced Functionally Graded Composite Wing with Attached Mass [Volume 19, Issue 8, 2019, Pages 1855-1864]
• Can Type Combustion Chamber Experimental Investigation of the Performance of a Microturbine Combustion Chamber at Atmospheric Conditions Using LPG Fuel [Volume 20, Issue 7, 2020, Pages 1911-1922]
• Capability of Dimensional Investigation on the Effect of Geometric Parameters on the Capability of Dimensional Measuring Tools for Machined Workpiece Using MSA Technique [Volume 22, Issue 10, 2021, Pages 53-58]
• Capacitance Measurement Measuring Flatness of a Rough Surface using a Capacitor Probe [Volume 8, Issue 1, 2008, Pages 87-97]
• Capacitive encoder Design,Fabrication and Development of a Capacitive-Type Linear Encoder Using Electrostatic Induction [Volume 16, Issue 3, 2016, Pages 153-160]
• Capillaries network Image-based computational modeling of the FDG tracer in a solid tumor with a consideration of capillaries network [Volume 18, Issue 7, 2018, Pages 88-96]
• Capillary Network Numerical Analysis of Flow and Mass Transfer in the Renal Glomeruli Capillary Network [Volume 14, Issue 8, 2014, Pages 1-7]
• Capillary Pressure Design of a Capillary-Driven Microfluidic Cooling System Using Non-Uniform Cross Section Microchannel [Volume 19, Issue 6, 2019, Pages 1319-1325]
• Capture Efficiency 3D Modeling of the Effects of Arrangement and Geometry of the Rod Matrix on the Capturing of Micro-Particles in High Gradient Magnetic Filters [Volume 19, Issue 10, 2019, Pages 2471-2480]
• Capture point Balance Recovery of a Humanoid Robot Using Hip and Ankle Joints on Small Contact Surfaces [Volume 17, Issue 1, 2017, Pages 413-422]
• CARB Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
• CARB Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
• Car Body of High Speed Trains Nonlinear Free Vibration Analysis of Composite Plate in Car Body of High Speed Trains [Volume 19, Issue 12, 2019, Pages 2955-2964]
• Carbon – Basalt / epoxy Identification effects of hybrid fibers in composite properties and Acoustic Emission parameters by Fuzzy C- Means [Volume 15, Issue 6, 2015, Pages 402-408]
• Carbon black Modified self-consistent micromechanics approach to the prediction of the stress-strain behavior of elastomeric nanocomposite using incremental theory [Volume 23, Issue 8, 2022, Pages 467-474]
• Carbon Dioxide study of a direct-expansion ground source heat pump using carbon dioxide [Volume 17, Issue 6, 2017, Pages 433-443]
• Carbon Dioxide Performanceof carbon dioxide direct-expansion geothermal heat pump using expander and internal heat exchanger [Volume 17, Issue 11, 2017, Pages 300-310]
• Carbon Dioxide Parameteric Study and Optimization of the Combined Power and Ejector Compression Refrigeration Cogeneration Cycle with Carbon Dioxide as the Working Fluid [Volume 24, Issue 11, 2023, Pages 95-101]
• Carbon Dioxide Numerical study of the effect of replacing nitrogen with helium-carbon ‎dioxide on diesel engine combustion [(Articles in Press)]
• Carbon/epoxy Residual Strength prediction of the Carbon/Epoxy plates under Low-Velocity Impact [Volume 22, Issue 5, 2021, Pages 291-302]
• Carbon/Epoxy Composite Optimizing the Vacuum Pressure, Injection point and Mold temperature in RTM process in order to Increase the Mechanical Properties and Minimizing the Production Time [Volume 21, Issue 8, 2021, Pages 517-525]
• Carbon Fabrics A Comparison Between the Ablation, Thermal and Micro-Structural Properties of Resole Matrix Composites Reinforced with Various Reinforcements [Volume 8, Issue 1, 2008, Pages 47-58]
• Carbon Fiber Experimental Study of Mechanical Properties on the Sandwich Panel with Auxetic Foam Core and Carbon Fiber [Volume 20, Issue 3, 2020, Pages 587-598]
• Carbon Fiber Non-destructive Inspection of Subsurface Cracks in Carbon-fiber and Glass-fiber Reinforced Polymeric Materials Using Digital Shearography Method [Volume 22, Issue 5, 2021, Pages 311-322]
• Carbon Fiber Exprimental Study on Effect of Machining Parametrs in Slotting Polymers Reinforced by Carbon Fibers and MWCNT Nanoparticles [Volume 23, Issue 10, 2022, Pages 57-62]
• Carbon Fiber Optimization of Drilling Parameters of Carbon Fiber Composites using RSM-Based Utility Function [Volume 23, Issue 10, 2022, Pages 237-243]
• Carbon Fiber Reinforced Polymers Experimental Investigation of the Effect of the Functional Pattern of Laser Surface Treatment on the Strength of Aluminum / Composite Adhesive Bonded Joint in the Mode I Fracture [Volume 23, Issue 8, 2022, Pages 485-495]
• Carbon Fibre Reinforced Polymer Impact Area Assessment in the Carbon Fiber Reinforced Polymer Composite using Radiography and Ultrasonic C-scan testing methods [Volume 18, Issue 3, 2018, Pages 332-338]
• Carbon Monoxide Emission (CO) Conceptual Design of ‍Conventional Gas Turbine Combustors Aiming at Pollutants Emission Prediction [Volume 16, Issue 10, 2016, Pages 429-440]
• Carbon nanoparticles Comprehensive Sensitivity Analysis of Carbon Nanoparticles-Enhanced PCMs’ Thermal Conductivity [Volume 25, Issue 3, 2024, Pages 137-146]
• Carbon nanotube Analysis of Nonlinear Vibrations of a Carbon Nanotube Using Perturbation Technique [Volume 12, Issue 3, 2012, Pages 60-67]
• Carbon nanotube Prediction of nanocomposite effective elastic moduli by finite element modeling in micro scale [Volume 13, Issue 5, 2013, Pages 91-101]
• Carbon nanotube Micromechanical model to evaluate the effects of dimensions and interphase region on the elastic modulus of CNT/polymer composites [Volume 11, Issue 3, 2011, Pages 13-25]
• Carbon nanotube Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
• Carbon nanotube The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
• Carbon nanotube An investigation on effects of aspect ratio of representative volume element on elastic modulus of a carbon nanotubes reinforced polymer [Volume 14, Issue 9, 2014, Pages 107-116]
• Carbon nanotube Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
• Carbon nanotube The structural properties and vibrational behavior of physisorbed carbon nanotubes with flavin mononucleotide biomolecule in water using molecular dynamics simulation [Volume 16, Issue 1, 2016, Pages 144-150]
• Carbon nanotube Experimental investigation of the influence of adding nanotubes on Mode I interlaminar fracture toughness of laminated composites [Volume 16, Issue 3, 2016, Pages 193-201]
• Carbon nanotube Electro-thermo-mechanical behavior modeling of short CNT reinforced piezo-polymeric composite [Volume 16, Issue 4, 2016, Pages 67-76]
• Carbon nanotube A Method of DNA Sequencing By Using Carbon Nanotube: A Molecular Dynamics Study [Volume 16, Issue 6, 2016, Pages 362-366]
• Carbon nanotube CNT influence on fracture toughness of a polymer-based nanocomposite under the out-of-plane shear in comparison with pure tensile loading conditions [Volume 16, Issue 10, 2016, Pages 441-447]
• Carbon nanotube Study the effect of environment temperature on mechanical and fracture behavior of carbon nanotubes [Volume 17, Issue 3, 2017, Pages 87-92]
• Carbon nanotube Micromechanical modeling of effective elastic properties of hybrid nanocomposites reinforced by fuzzy fiber containing carbon nanotubes [Volume 17, Issue 9, 2017, Pages 261-272]
• Carbon nanotube Investigation of electrospun polyvinyl butyral interlayer effects on Mode I and II delamination of glass fabric-phenolic composites [Volume 18, Issue 6, 2018, Pages 156-164]
• Carbon nanotube An experimental investigation of energy absorption in GLARE fiber metal laminates reinforced by CNTs under low velocity impact [Volume 18, Issue 8, 2018, Pages 81-91]
• Carbon nanotube Analytical and Experimental Study of Sandwich Beams with Flexible Core and Composite Facings Reinforced with Carbon Nanotubes [Volume 19, Issue 4, 2019, Pages 801-813]
• Carbon nanotube Flutter Analysis of CNT-Reinforced Functionally Graded Composite Wing with Attached Mass [Volume 19, Issue 8, 2019, Pages 1855-1864]
• Carbon nanotube Effect of Adding Carbon Nanotubes into the Matrix Material on the Aero-Thermo-Elastic Stability Region of Fibrous Laminates [Volume 20, Issue 3, 2020, Pages 787-796]
• Carbon nanotube Effect of carbon nanotubes on the critical buckling load of composite reinforced aluminium columns: An experimental approach [Volume 20, Issue 12, 2020, Pages 2679-2688]
• Carbon nanotube A developed model for electrical conductivity of silicone rubber-carbon nanotube (CNT) nanocomposites based on power-law model [Volume 22, Issue 4, 2021, Pages 253-263]
• Carbon nanotube Evaluation the effect of adding CNT and CuO to the base fluid on the health and surface roughness of Inconel 718 MQL grinding [Volume 22, Issue 5, 2021, Pages 335-345]
• Carbon nanotube Optimization of Drilling Parameters of Carbon Fiber Composites using RSM-Based Utility Function [Volume 23, Issue 10, 2022, Pages 237-243]
• Carbon-Nanotube Thermal Residual Stress Analysis of CNTs Reinforced Polymer Using a Cyclic Symmetry Semi-Continuum Model [Volume 20, Issue 4, 2020, Pages 1041-1052]
• Carbon nanotube (CNT) Mechanical and microstructure properties of Al/CNT-Al2O3 hybrid nanocomposite produced by accumulative roll bonding process [Volume 17, Issue 12, 2017, Pages 56-64]
• Carbon Nanotube Modeling Interface Modeling of Nanotube Reinforced Nanocomposites by Using Multi-Scale Modeling Method [Volume 12, Issue 5, 2012, Pages 1-11]
• Carbon nanotubes Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
• Carbon nanotubes Characterization of the electrical and electromagnetic properties of CNT-based composites [Volume 13, Issue 12, 2013, Pages 88-100]
• Carbon nanotubes Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
• Carbon nanotubes Experimental investigation of the effect of the addition of carbon nanotubes on the quasi-static punch shear penetration of the laminated glass / epoxy composite [Volume 15, Issue 12, 2015, Pages 416-424]
• Carbon nanotubes Influence of indenter nose in quasi-static punch shear penetration of the nanostructured laminated plates [Volume 16, Issue 4, 2016, Pages 196-204]
• Carbon nanotubes Dynamic stability analysis of CNTs under combined static and periodic axial loads using Floquet–Liapunov theory [Volume 16, Issue 12, 2016, Pages 365-372]
• Carbon nanotubes Improving shear strength in nanocomposites through electrophoretic deposition of carbon nanotubes [Volume 17, Issue 1, 2017, Pages 462-472]
• Carbon nanotubes Investigation and Sensitivity Analysis of Dimensional Parameters and Velocity in the 3D Nanomanipulation Dynamics of Carbon Nanotubes Using Statistical Sobol Method [Volume 19, Issue 1, 2019, Pages 125-135]
• Carbon nanotubes Evaluation of Mechanical and Electrical Properties of Al/Cu/Carbon Nanotubes Multilyer Nanocomposites Manufactured by Accumulative Roll Bonding (ARB) [Volume 20, Issue 5, 2020, Pages 1333-1346]
• Carbon nanotube؛Structural defect؛FEM؛young&rsquo The effects of structural defects on the mechanical properties of CNT (Revised Version) [Volume 13, Issue 13, 2013, Pages 165-175]
• Carbon-Peek Ring Experimental and Numerical Investigating of Failure Factors in One-Way Ring Valves in Reciprocating Compressors [Volume 19, Issue 9, 2019, Pages 2299-2308]
• Carbon steel Evaluation of several hardening models in the ratcheting behavior of piping branch with Different diameter/thickness ratios [Volume 18, Issue 2, 2018, Pages 201-208]
• Carbon steel Experimental study of aging effect on mechanical and vibrational properties on carbon steel SA516 [Volume 18, Issue 7, 2018, Pages 50-55]
• Carbon Steel ST37 Experimental and numerical study of spring back of C-die forming in austenitic stainless steel 316 and carbon steel ST37 sheets with different thicknesses [Volume 23, Issue 12, 2022, Pages 651-659]
• CARB process Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process [Volume 17, Issue 7, 2017, Pages 180-184]
• Cardan Angle Obtaining Stable Cardan Angles in Rotating Systems and Investigating the Effective Parameters on System Stability [Volume 14, Issue 12, 2014, Pages 163-170]
• Cardan Joint Performance of different robust control methods for three-axis rotary systems [Volume 18, Issue 8, 2018, Pages 101-110]
• Cardiac Arrest Design and Construction of a Novel Automated and Portable Chest Compression Device [Volume 18, Issue 1, 2018, Pages 258-264]
• Cardiac Assist Device Analytical Tow-Dimensional Modeling of Blood Flow in a Balloon with Periodic Inflation and Deflation; Application in Intra- and Extra-Aortic Cardiac Assist Devices [Volume 19, Issue 3, 2019, Pages 569-576]
• Cardiopulmonary Resuscitation Design and Construction of a Novel Automated and Portable Chest Compression Device [Volume 18, Issue 1, 2018, Pages 258-264]
• Cardiovascular Biomechanics A 3D Unpressurized Model for Non Linear Dynamic Analysis of Human Aortic Valve in Dynamic Condition [Volume 16, Issue 3, 2016, Pages 263-272]
• Carreau yasuda model Study of the helix angle effect on the pumping performance of Newtonian and non-Newtonian flows in single screw extruders [Volume 15, Issue 10, 2015, Pages 158-164]
• Carreau-Yasuda model Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
• Carreau-Yasuda model Numerical simulation of two-phase non-Newtonian polymer flooding in porous media to enhance oil recovery [Volume 16, Issue 7, 2016, Pages 297-307]
• Cartesian Space A new mapping method for joint and Cartesian stiffness, damping and mass matrices for large displacement in impedance control [Volume 17, Issue 1, 2017, Pages 117-128]
• Cartesian workspace Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
• Cascade Reservoirs An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
• Casing Investigating the effect of construction defects on the Casing Collapse Strength [Volume 19, Issue 12, 2019, Pages 3031-3038]
• Casing Treatment Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
• Cast and Wrought Structure Hot Workability Behavior of W360 Hot Work Tool Steel in the Cast and Wrought Conditions [Volume 20, Issue 7, 2020, Pages 1923-1932]
• Casting nanocomposite Investigation of the microstructure and mechanical properties of cast AA7068 nanocomposite reinforced with graphene nano plates [Volume 17, Issue 10, 2017, Pages 139-144]
• Casting Tundish Physical modeling of melt flow in steel continuous casting tundish [Volume 17, Issue 6, 2017, Pages 385-392]
• Catalyst A Review of Heterogeneous Catalysts in Methane Combustion [Volume 25, Issue 6, 2024, Pages 307-332]
• Catalyst layer degradation Prediction of degradation in performance of cathode catalyst layer during load cycling [Volume 17, Issue 6, 2017, Pages 67-78]
• Catalyst layer performance Prediction of degradation in performance of cathode catalyst layer during load cycling [Volume 17, Issue 6, 2017, Pages 67-78]
• Catalytic radiant burner 2D Simulation of Catalytic Radiant Counter-Diffusive Burners [Volume 14, Issue 5, 2014, Pages 83-90]
• Cathodic Arc Evaporation Assessment of the Corrosion and Tribological Properties of Double Layer Nitride Coatings Performed by Plasma Nitriding and Cathodic Arc Evaporation on Ti-6Al-4V Alloy [Volume 20, Issue 6, 2020, Pages 1555-1565]
• Cavitating Flow Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
• Cavitation time Derivation of cavitation time of underwater rectangular plate subjected to impulsive dynamic loading [Volume 15, Issue 2, 2015, Pages 253-260]
• Cavitation time Effect of cavitation time on elstoplastic response of circular underwater plate subjected to explosive loading [Volume 15, Issue 11, 2015, Pages 88-96]
• Cavitator Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
• Cavity Natural Convection in a Square Cavity with a Heated Obstacle Using Lattice Boltzmann Method [Volume 11, Issue 2, 2011, Pages 119-133]
• Cavity Comparison of Heat Transfer in a Cavity between Vertical and Horizontal Porous Layers using LBM [Volume 13, Issue 8, 2013, Pages 93-107]
• Cavity Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
• Cavity Extending Reynolds Number range in numerical simulation Of fluid flow using Boundary Element Method [Volume 18, Issue 4, 2018, Pages 181-190]
• Cavity Flow On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
• Cavity Length Analytical approach to estimate supercavity length based on cavity and Reynolds numbers [Volume 16, Issue 5, 2016, Pages 153-159]
• Cavity Length Numerical study of gas rate coefficient effect on ventilated supercavitating flow specifications [Volume 18, Issue 2, 2018, Pages 443-450]
• Cavity Receiver A Parametric Study on Optical Performance of a Multi-Tubular Solar Reactor by Monte-Carlo ray Tracing Method [Volume 19, Issue 3, 2019, Pages 643-653]
• CBOD An investigation into effects of changing dimensions of flywheel of a non-explosive separation system on its performance [Volume 22, Issue 6, 2021, Pages 419-428]
• CCHP Design of CCHP system for office buildings in Tehran and thermodynamical, environmental and economical evaluation in comparison to conventional system [Volume 14, Issue 6, 2014, Pages 124-134]
• CCHP Multi-criteria evaluation of CCHP system under different operating strategies for an office building in Tehran using AHP method [Volume 14, Issue 8, 2014, Pages 37-48]
• CCHP Performance analysis of a combined cooling, heating and power system driven by PEM fuel cell at different conditions [Volume 16, Issue 3, 2016, Pages 383-394]
• CCHPP Potentials of the gas turbine of Ilam Gas Refinery Company for large scale combined cooling, heating, power and process (CCHPP) [Volume 16, Issue 10, 2016, Pages 115-126]
• CCT diagrams Investigation of continuous cooling transformation behavior of API X70 gas and oil pipeline steel [Volume 15, Issue 4, 2015, Pages 133-140]
• C-D nozzle Experimental Investigation of the Effect of Cylindrical Protuberance with Different Penetration the Thrust Vector a C-D Nozzle in Supersonic regime [Volume 19, Issue 5, 2019, Pages 1145-1154]
• Ceiling Cooling Effects of Adaptive Temperature Metal Panels on Thermal Comfort and Energy Consumption of Radiant Ceiling Cooling Systems [Volume 8, Issue 1, 2008, Pages 13-32]
• Ceiling radiant cooling Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
• Cell-Centered Finite Volume Method Development of an Implicit Physical Influence Upwinding Scheme for Cell-Centered Finite Volume Method [Volume 16, Issue 10, 2016, Pages 253-265]
• Cell Decomposition Moving obstacle detection algorithm using cell decomposition method [Volume 16, Issue 8, 2016, Pages 29-36]
• Cell Density A Review on Principles and Fundamentals of Fabrication of Polymeric Foams in Regards to Increasing Cell Density/ Reducing Cell Size [Volume 19, Issue 1, 2019, Pages 211-222]
• Cell Membrane Molecular Dynamics Simulation of Induced Shear Stress on Cell Membrane [Volume 25, Issue 9, 2024, Pages 603-611]
• Cell Nucleation A Review on Principles and Fundamentals of Fabrication of Polymeric Foams in Regards to Increasing Cell Density/ Reducing Cell Size [Volume 19, Issue 1, 2019, Pages 211-222]
• Cell Size A Review on Principles and Fundamentals of Fabrication of Polymeric Foams in Regards to Increasing Cell Density/ Reducing Cell Size [Volume 19, Issue 1, 2019, Pages 211-222]
• Cell Size Optimization of solid and radiation thermal conductivity of polymeric foams using response surface method based on a novel theoretical model [Volume 19, Issue 9, 2019, Pages 2165-2173]
• Cell sorting Development of a new Method for Experimental Dielectrophoresis Force Measurement in the Microfluidic Cell Sorting Actuators [Volume 17, Issue 3, 2017, Pages 150-158]
• Cellular Neural Network Simulation of Soft Tissue Deformation in Haptic Systems with Cellular Neural Networks [Volume 18, Issue 6, 2018, Pages 223-229]
• Cellular Pott’s Model Mechanical Effects of Extra-cellular Matrix on Growth and Migration of Endothelial Cells in Tumor-induced Angiogenesis [Volume 14, Issue 7, 2014, Pages 1-9]
• Cellular Potts Model Investigate the effect of inosculation strategy on promoting vascularization in tissue engineering [Volume 16, Issue 4, 2016, Pages 29-40]
• Cellular Structure Prediction of Mechanical Properties and Failure of Honeycomb and DNA Inspired Mesh Structure under Tensile Load [Volume 24, Issue 3, 2023, Pages 141-151]
• Cement An investigation on GO-cement nanocomposites performance under the temperature and pressure of oil wells using molecular dynamics method [Volume 17, Issue 11, 2017, Pages 419-428]
• Cement Rotary Kiln Investigation of Combustion Models in Numerical Simulation of Cement Rotary Kiln [Volume 15, Issue 7, 2015, Pages 199-208]
• Center crack Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
• Central bursting defects Prediction of central bursting defects in the plane strain extrusion process using upper bound method [Volume 17, Issue 11, 2017, Pages 361-370]
• Central composite design The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
• Central composite design Effect of Selective Laser Sintering 3D Printing Variables on the Breaking Force of Printed Tablets [Volume 20, Issue 3, 2020, Pages 797-806]
• Central composite design The Correlation between Microstructure Features and Tensile Properties of Ti-6Al-4V Alloy Using Artificial Neuron Networks [Volume 20, Issue 8, 2020, Pages 2017-2027]
• Central Composite Design (CCD) Experimental Analysis of Abrasion Resistance of Acrylonitrile Butadiene Styrene Components Made by Fused Deposition Modelling Using Response Surface Method [Volume 21, Issue 4, 2021, Pages 235-245]
• Central composite rotatable design The application of central composite rotatable design to model and optimize the tensile strength of “composite–steel” connections [Volume 14, Issue 9, 2014, Pages 157-164]
• Centralized control Formation Control and Path Tracking for a Group of Quadrotors to Carry Out a Suspended Load [Volume 19, Issue 4, 2019, Pages 887-899]
• Central Limit Theory The study of the effect of bandwidth and loading level parameters of random load histories on the fatigue crack growth in a CT specimen by the central limit theory [Volume 13, Issue 6, 2013, Pages 20-29]
• Central pattern generator (CPG) Optimization of coupling weights in a 4-cell central pattern generator network for bipedal locomotion gait generation [Volume 16, Issue 12, 2016, Pages 144-152]
• Central pattern generator (CPG) Trajectory design of harmonic loading machine input by central pattern generator [Volume 17, Issue 12, 2017, Pages 423-434]
• Centrifugal compressor Performance Improvement of a Centrifugal Compressor Using a Developed Inverse Design Method [Volume 12, Issue 2, 2012, Pages 109-124]
• Centrifugal compressor Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
• Centrifugal compressor Inverse Design of 90-Degree Bend between Radial and Axial Diffuser of a Centrifugal Compressor by Ball-Spine Method [Volume 15, Issue 8, 2015, Pages 371-378]
• Centrifugal Force Investigation of Continuous Changes in Output Speed and Torque in a Multi-Pass Radial Turbine [Volume 25, Issue 6, 2024, Pages 333-343]
• Centrifugal pump Multi Objective Optimization of the Centrifugal Oil Pump Impeller [Volume 13, Issue 11, 2013, Pages 139-149]
• Centrifugal pump Estimation of a centrifugal pump slip factors at off-design conditions using computational fluid dynamics [Volume 15, Issue 3, 2015, Pages 199-207]
• Centrifugal pump Numerical and Experimental Study of splitter blades effect on the centrifugal pump performance [Volume 15, Issue 3, 2015, Pages 398-410]
• Centrifugal pump Numerical simulation of fluid flow in a centrifugal pump at design point and off-design conditions [Volume 16, Issue 2, 2016, Pages 88-98]
• Centrifugal pump Numerical investigation of fluid flow between the impeller and casing on disk friction for a centrifugal pump [Volume 16, Issue 4, 2016, Pages 163-174]
• Centrifugal pump Inverse Design of Meridional Flow Passage Shape of Centrifugal Pump Impeller Using Ball-Spine Algorithm [Volume 16, Issue 12, 2016, Pages 259-268]
• Centrifugal pump Numerical Investigation of Fluid Flow and Hemolysis in Axial and Centrifugal Pump as Left Ventricular Assist Device (LVAD) [Volume 17, Issue 3, 2017, Pages 135-142]
• Centrifugal pump Experimental and numerical study of double splitter blades effect on the centrifugal pump performance [Volume 17, Issue 3, 2017, Pages 196-204]
• Centrifugal pump Fault propagation analysis for an induction motor- centrifugal pump system [Volume 17, Issue 12, 2017, Pages 485-494]
• Centrifugal pump Numerical simulation and multi-objective optimization of the centrifugal pump inducer [Volume 18, Issue 7, 2018, Pages 205-216]
• Centrifugal Turbomachinery Inference System Based on Fuzzy Clustering to Display the Flow Field Changes in the Rotor Outlet of Centrifugal Turbomachinery [Volume 19, Issue 6, 2019, Pages 1495-1505]
• Ceramic Analysis of penetration process in hybrid ceramic/nanocomposite targets [Volume 16, Issue 10, 2016, Pages 137-146]
• Ceramic Design and fabrication of a 3D printer based on the selective laser sintering (SLS) technology [Volume 22, Issue 10, 2021, Pages 219-226]
• Ceramic Characterization of TiN-5wt%Ti Ceramic and Simulation of its Mechanical Behavior Based on Nanoindentation Analysis [(Articles in Press)]
• Ceramic balls Eccentric lap plate mechanism for ceramic balls lapping [Volume 18, Issue 1, 2018, Pages 265-272]
• Ceramic matrix composite Experimental study on grinding forces and specific energy in three different environments of grinding carbon fiber reinforced silicon carbide composite [Volume 18, Issue 1, 2018, Pages 379-387]
• Ceramic matrix composite Surface Quality, Efficiency and Process Optimization of Grinding Carbon Fiber-Reinforced Silicon Carbide Composite [Volume 20, Issue 6, 2020, Pages 1409-1421]
• Ceramic-Metal Analytical and Numerical Investigation of Ballistic Impact into Layered Targets with Analytical Modifications [Volume 20, Issue 9, 2020, Pages 2197-2211]
• Ceramic microballoon Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams [Volume 14, Issue 2, 2014, Pages 47-54]
• Ceramic microballoon Volume fraction and microballoon size effects on the compressive properties of epoxy/ceramic microballoon syntactic foam [Volume 14, Issue 4, 2014, Pages 37-44]
• Ceramics Numerical and Experimental Study of Oblique Penetration of a Blunt Projectile into Ceramic- Aluminum Target [Volume 19, Issue 5, 2019, Pages 1253-1263]
• Ceramics Derivation of the effective volume of a ceramic component with a truncated cone shape under internal pressure by analytical and numerical methods [Volume 23, Issue 11, 2022, Pages 597-606]
• Cerebrospinal fluid Relationship between Spinal fluid pressure and Cerebrospinal fluid pressure as an index for assessment of hydrocephalus non-communicating [Volume 14, Issue 13, 2014, Pages 308-314]
• Cerebrovascular arteries Analyzing the effect of Deformability of Blood Clots on their Motion in the Cerebrovascular Arteries [Volume 16, Issue 1, 2016, Pages 1-9]
• Cervical Spinal Cord Injury Design and Prototyping of a Haptic User Interface based on Head Movements for Patients with Cervical Spinal Cord Injury [Volume 17, Issue 5, 2017, Pages 52-62]
• CFD Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
• CFD Analysis of performance convergent nozzle ejector in the PEM system [Volume 13, Issue 8, 2013, Pages 135-150]
• CFD Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
• CFD Effect of Rotor Blade Twist on Axial Transonic Compressor Performance [Volume 13, Issue 11, 2013, Pages 154-160]
• CFD Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
• CFD Parametric Study of Ocean Wave Turbine (Wells Type) over the Floating Oscillating Platform: A Numerical Analysis [Volume 14, Issue 13, 2014, Pages 77-85]
• CFD Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace [Volume 14, Issue 16, 2014, Pages 252-260]
• CFD Numerical Investigation of Water/〖Al〗_2 O_3 Nanofluid Forced Convective Boiling flow in a Vertical Channel [Volume 15, Issue 1, 2015, Pages 403-411]
• CFD Investigation of Combustion Models in Numerical Simulation of Cement Rotary Kiln [Volume 15, Issue 7, 2015, Pages 199-208]
• CFD Simulation and Prediction of Reboiler flow field parameters [Volume 15, Issue 9, 2015, Pages 289-297]
• CFD Numerical Investigation of Fire Spread from a Fire Source to a Near Body in a Tunnel [Volume 15, Issue 10, 2015, Pages 1-11]
• CFD Application of Gram-Schmidt orthogonalization method in uncertainty quantification of computational fluid dynamics problems with arbitrary probability distribution functions [Volume 15, Issue 12, 2015, Pages 1-8]
• CFD Numerical simulation of darrieus wind turbine Using 6DOF model to consider the effect of inertia and the fluid-solid interaction [Volume 15, Issue 12, 2015, Pages 143-152]
• CFD Optimization of a Typical Gas Turbine Exhaust Diffuser by CFD and Genetic Algorithm [Volume 16, Issue 2, 2016, Pages 223-234]
• CFD Numerical investigation of fluid flow between the impeller and casing on disk friction for a centrifugal pump [Volume 16, Issue 4, 2016, Pages 163-174]
• CFD Evaluation of FPGA hardware as a new approach for accelerating the numerical solution of the Laplace problem [Volume 17, Issue 1, 2017, Pages 67-74]
• CFD Developing a pyrolysis model for numerical simulation of thermal decomposition in combustible solid [Volume 17, Issue 1, 2017, Pages 86-94]
• CFD Numerical Analysis on the Effects of Impeller Geometry Parameters for a Centrifugal Pump in Reverse Operation [Volume 17, Issue 9, 2017, Pages 13-24]
• CFD Numerical simulation of wind turbine in Manjil wind farm considering wind regime study [Volume 17, Issue 9, 2017, Pages 75-85]
• CFD Accuracy Evaluation of Semi-empirical and Numerical Methods in Estimation of Aerodynamic Coefficients for air-launch-to-orbit delta wing [Volume 17, Issue 9, 2017, Pages 237-244]
• CFD Investigation of Gas Compression Process inside Oleo-Pneumatic Shock-Absorber with Two-Phase Flow Simulation Method [Volume 17, Issue 8, 2017, Pages 133-142]
• CFD Optimization of geometric parameters and excitation frequency of a synthetic jet to avoid separation on the airfoil _ [Volume 17, Issue 12, 2017, Pages 65-76]
• CFD Comparison of Dynamic Stall Models Using Numerical and Semi-Empirical Approaches for a Wind-Turbine Airfoil [Volume 18, Issue 3, 2018, Pages 282-290]
• CFD A numerical study of slip velocity effects on a 2D airfoil dynamic analysis [Volume 18, Issue 8, 2018, Pages 183-192]
• CFD Numerical Simulation of Particle Dispersion around Respiratory System of a Standing and Sleeping Mannequin inside a Room [Volume 19, Issue 4, 2019, Pages 877-885]
• CFD Numerical Investigation of Cavitation Effect on the Performance of Waterjet Propulsion System by Computational Fluid Dynamics [Volume 19, Issue 7, 2019, Pages 1779-1788]
• CFD Effects of Oscillation Parameters of a Wind Turbine Airfoil with Slip Velocities on Aerodynamic Loads [Volume 19, Issue 9, 2019, Pages 2093-2104]
• CFD modeling Numerical simulatoin of poolfire suppression using water mist system investigating nozzle parameter effects [Volume 17, Issue 2, 2017, Pages 350-358]
• CFD Simulation Investigating courtyard and its design parameters for thermal performance and comfort in Tehran climate [Volume 17, Issue 4, 2017, Pages 369-380]
• CFD Simulation CFD Simulation of Operational Parameters Effects on Mixing Quality of Two-phase Gas-Liquid Flow in Agitated Vessel [Volume 18, Issue 8, 2018, Pages 9-18]
• CFD Simulation CFD Simulation of Transit-time Ultrasonic Flowmeter with PZT-5J Piezoelectric Sensor for Light, Heavy, and Medium Crude Oil [Volume 19, Issue 6, 2019, Pages 1337-1346]
• CFD Simulation Development of a New Model for Prediction of Gas Turbine Flowmeter Performance Using CFD Simulation [Volume 20, Issue 7, 2020, Pages 1933-1941]
• CFD Simulation Experimental Investigation and CFD Simulation of Vortex Flow Meter Performance in Gas-Solid Two-Phase Flow [Volume 20, Issue 9, 2020, Pages 2263-2274]
• CFRP Strengthening Defected Dam Gates under Cavitation Vibration Using CFRP [Volume 19, Issue 4, 2019, Pages 825-831]
• CFRP Composite Analysis and Modeling of Damage and Crack Growth in Composite Workpieces under Machining Process using the Bond-Based Peridynamic Theory [Volume 23, Issue 10, 2022, Pages 209-221]
• CFT Column The Effect of Debonding Damage of Steel Tube from Concrete Core on the Dynamic Parameters of CFT Column [Volume 24, Issue 11, 2023, Pages 17-22]
• CFT Columns Investigating the Static Behavior of Columns with Steel Sections Filled with Concrete [Volume 24, Issue 11, 2023, Pages 121-127]
• Chaboche Hardening Model Study of Ratcheting Behavior of 304L Stainless Steel Branch Pipes by Using Chaboche and Combined Hardening Models [Volume 19, Issue 9, 2019, Pages 2193-2201]
• Chaboche plasticity model An investigation into strain rate dependency of Chaboche plasticity model [Volume 14, Issue 14, 2014, Pages 9-16]
• Chaboche plasticity model Studying the distribution of residual stresses in deep rolling process of Al 7075 [Volume 15, Issue 7, 2015, Pages 426-434]
• Chalmers Test Experimental Study of Effective Parameters on Production and Mechanical Properties of Al- brass Bimetal Composite [Volume 16, Issue 7, 2016, Pages 170-178]
• Chamfer dimension The Experimental and Simulation Investigation of Process and Geometrical Parameters for Hydroforming of Pin-type Metallic Bipolar plates [Volume 15, Issue 7, 2015, Pages 215-226]
• Chang elastic-plastic contact theory Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
• Change of the damage mode Failure Mode Characterization and Dominant Mode Determination in Progressive Damage Due to High Velocity Impact on Woven Composite Laminates [Volume 17, Issue 8, 2017, Pages 313-322]
• Changing cross section profile Investigation of Web Warping of Profiles with Changing Cross Section in Flexible Roll Forming Process [Volume 14, Issue 6, 2014, Pages 72-80]
• Channel Effect of nanoparticles on mixed convection heat transfer in a horizontal channel with heat source [Volume 12, Issue 2, 2012, Pages 95-108]
• Channel Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
• Chaos Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]
• Chaos Influence of weight parameter on chaotic vibration of flexible rotor supported by active magnetic bearings [Volume 16, Issue 1, 2016, Pages 213-224]
• Chaos Analytical and Numerical Analysis of Chaos in Attitude Dynamics of a Satellite in an Elliptic Orbit [Volume 17, Issue 7, 2017, Pages 236-244]
• Chaos Chaotic behavior of nonlocal nanobeam resting on a nonlinear viscoelastic foundation subjected to harmonic excitation [Volume 18, Issue 2, 2018, Pages 264-272]
• Chaos Control Bifurcation and chaos control in a gear transmission [Volume 14, Issue 14, 2014, Pages 61-68]
• Chaos Control Nonlinear Dynamics Control and Analysis of Atomic Force Microscope Based On Nonlocal Model [Volume 19, Issue 12, 2019, Pages 2987-2997]
• Chaotic Behavior Analyze of lubricant effect on stabilizing the dynamic behavior of slider- crank mechanism with revolute joint clearance [Volume 14, Issue 15, 2014, Pages 377-387]
• Chaotic Behavior Experimental fault detection of a ball bearing using the chaotic behavior features of a vibration signal [Volume 15, Issue 2, 2015, Pages 289-297]
• Chaotic Behavior Nonlinear Dynamics and Chaotic Behavior in an Oscillator Connected to Shape Memory Alloy [Volume 19, Issue 1, 2019, Pages 95-104]
• Chaotic mixer Experimental and numerical investigation of effect of chaotic flow on mixing of highly viscous fluids [Volume 17, Issue 11, 2017, Pages 151-160]
• Chaotic Motion Planning Boundary Surveillance Using Chaotic Motion Planning and Control for a Quadrotor Robot [Volume 16, Issue 11, 2016, Pages 217-223]
• Chaotic Time Series Improved Noise Reduction Method for Chaotic Time Series Using Neural Network and Singular Spectrum Analysis [Volume 24, Issue 1, 2023, Pages 53-63]
• Chaotic vibrations Analysis of the passengers effect on chaotic vibrations of a nonlinear full vehicle model [Volume 15, Issue 1, 2015, Pages 173-184]
• Chapman-Enskog Evaluation of the Simplified Bernoulli Trial collision algorithm in treating rarefied nano-Fourier flow [Volume 16, Issue 11, 2016, Pages 113-122]
• Characteristic Curves Energy and Exergy Analysis of 190 W Photovoltaic Cell [Volume 21, Issue 11, 2021, Pages 743-755]
• Characteristic length The effect of couple-stresses on the elastodynamic field of a diffracted wave by an embedded nano-cavity in an infinite medium [Volume 15, Issue 8, 2015, Pages 1-9]
• Characteristic Method Investigating the domain length for simulation of gaseous detonation [Volume 15, Issue 1, 2015, Pages 277-284]
• Charactristic lenght Extraction of dispersion curves for lamb waves in an aluminium nitride (AlN) micro plate using consistent couple stress theory [Volume 16, Issue 1, 2016, Pages 248-256]
• Charged System Search Application of Isogeometric Analysis and Charged System Search Algorithm in Structural Shape Optimization [Volume 16, Issue 5, 2016, Pages 251-260]
• Charge Leakage Modeling and Compensation of Charge Leakage in Self-Sensing Position Estimation for Piezoelectric Actuators [Volume 20, Issue 6, 2020, Pages 1501-1510]
• Charpy Impact An experimental investigation of energy absorption in GLARE fiber metal laminates reinforced by CNTs under low velocity impact [Volume 18, Issue 8, 2018, Pages 81-91]
• Charpy Impact Energy ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
• Charpy impact strength Novel HDPE/ZnO nanocomposites for medical applications: preparation, impact strength and antibacterial activity characterization [Volume 21, Issue 3, 2021, Pages 163-172]
• Charpy Impact Test Experimental Study of Mechanical Properties on the Sandwich Panel with Auxetic Foam Core and Carbon Fiber [Volume 20, Issue 3, 2020, Pages 587-598]
• Charpy Impact Test Experimental and Numerical Evaluation of Momentum Variations Effect of Striker on Fracture Energy in Charpy Impact Testing of API X65 Steel [Volume 20, Issue 9, 2020, Pages 2275-2287]
• Charpy Impact Test Experimental investigation of anisotropy in API X65 steel pipe using Charpy fracture energy [Volume 22, Issue 6, 2021, Pages 407-417]
• Charpy Impact Test Application of image processing to study fracture surface of API X70 steel under Charpy impact test [Volume 22, Issue 11, 2021, Pages 677-686]
• Chattering Design of Dynamic Sliding Mode Controller for Active Suspension System [Volume 16, Issue 2, 2016, Pages 51-58]
• Chattering Fractional order sliding mode controller design for quadrotor system [Volume 17, Issue 5, 2017, Pages 287-294]
• Chatter Suppression Application of Normalized Least Mean Square Adaptive Filter for Chatter Vibration Control [Volume 20, Issue 4, 2020, Pages 973-986]
• Chatter vibration Chatter detection in turning process using machine vision [Volume 13, Issue 10, 2013, Pages 94-104]
• Chatter vibration Identification and control of an active boring bar using VCA actuator [Volume 17, Issue 8, 2017, Pages 87-96]
• Chebychev colocation Charge-Discharge Cycle Simulation of Lead-Acid Cell Using Chebyshev Spectral Method [Volume 17, Issue 10, 2017, Pages 213-222]
• Checkerboard Thomas algorithm Developing new Checkerboard Thomas algorithm for solving tridiagonal set of equations on GPU [Volume 16, Issue 2, 2016, Pages 309-318]
• Chemical composition ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
• Chemical Kinetic Comparison of some global chemical kinetics effects on methane lifted flame 3D simulation [Volume 17, Issue 8, 2017, Pages 105-116]
• Chemical reaction 2D Numerical simulation of the nonlinear deformation of thin plate under gaseous mixture detonation axisymmetric loading [Volume 21, Issue 11, 2021, Pages 729-742]
• Chemical Reactor Network Conceptual Design of ‍Conventional Gas Turbine Combustors Aiming at Pollutants Emission Prediction [Volume 16, Issue 10, 2016, Pages 429-440]
• Chemical Reactor Network Investigation of the effects of steam addition on the conceptual design and pollutants emission of the gas turbine combustor [Volume 18, Issue 6, 2018, Pages 85-96]
• Chemotherapy Fuzzy Control for Drug Delivery in Cancerous Tumors Chemotherapy [Volume 19, Issue 6, 2019, Pages 1467-1473]
• Chen-Wang Theory Bending analysis of micro cantilevers based on the Chen-Wang strain gradient plasticity theory [Volume 15, Issue 2, 2015, Pages 198-204]
• Chest Compression Design and Construction of a Novel Automated and Portable Chest Compression Device [Volume 18, Issue 1, 2018, Pages 258-264]
• Chewing simulator Design and Manufacturing of Chewing Simulation Machine [Volume 22, Issue 10, 2021, Pages 145-153]
• CHF Prediction of Departure from Nucleate Boiling in a mini Channel Using CFD [Volume 15, Issue 3, 2015, Pages 303-312]
• Chip Formation Energy Evaluation of chip formation process in the grinding of GFRP and CFRP [Volume 21, Issue 12, 2021, Pages 849-857]
• Chip morphology Study on Machining of Inconel 718 Super Alloy and Effective Process Parameters Using Design of Experiment Method [Volume 16, Issue 9, 2016, Pages 366-374]
• Chips Improving the Performance of Spot Welds in Galvanized Steel Sheets using RGO Reinforcement and Recycled CK45 Steel Chips: A Step Toward Green Welding [Volume 25, Issue 11, 2024, Pages 725-734]
• Chip Temperature Experimental Study of Cutting and Feeding Forces, Temperature and Surface Integrity in The Machining Process of Waspaloy [Volume 23, Issue 12, 2022, Pages 697-706]
• Chip Temperature An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2023, Pages 363-371]
• Chip Thickness Modeling the cutting force in ultrasonic-vibration assisted milling and its empirical study [Volume 14, Issue 9, 2014, Pages 10-16]
• Chiral Angle Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
• C/H mass ratio Comparison of effects of adding various carbon nanotube concentrations and increase C/H mass ratio of liquid fuels on combustion behavior and flame thermal radiation [Volume 17, Issue 9, 2017, Pages 205-213]
• Chondrogenic differentiation A Hyper-Viscoelastic Model for an Individual Stem Cell Subjected to Cyclic Loading for Mechanical Modulation toward Differentiating to Fibrochondrocytes [Volume 17, Issue 7, 2017, Pages 207-216]
• CHP System Investigation on the Effect of Guaranteed Selling of Generated Electric Power and Other Effective Parameters on the Application of CHP System in Iranian Industries [Volume 19, Issue 5, 2019, Pages 1221-1227]
• Circular (Annular) Finned Tube Optimal Architecture Design of Circular Finned Tube using Constructal Theory [Volume 16, Issue 1, 2016, Pages 317-323]
• Circular chamber Numerical investigation of the mixing performance of two-blade twin and circular mixers by using an improved Weakly Compressible Smoothed Particle Hydrodynamics [Volume 14, Issue 11, 2014, Pages 97-105]
• Circular cutout Postbuckling Analysis of Laminated Composites with Cutout Using Experimental, Numerical, and Finite Strip Methods [Volume 19, Issue 8, 2019, Pages 2067-2077]
• Circular cylinder Flow Control and Drag Reduction of Circular Cylinder Using Moving Surfaces by Two-dimensional Simulation [Volume 16, Issue 12, 2016, Pages 12-20]
• Circular Cylindrical Shell Flutter of a Circular Cylindrical Shell Subjected to Supersonic External Flow by Considering Internal Fluid Effects through a Novel Formulation [Volume 19, Issue 6, 2019, Pages 1355-1362]
• Circular Graphene Sheet Nonlinear analysis of circular graphene sheet using nonlocal continuum mechanic theory [Volume 13, Issue 13, 2013, Pages 57-66]
• Circular Hole Study of the stress distribution around a circular hole in a heterogeneous plate subjected to in-plane loads [Volume 15, Issue 6, 2015, Pages 249-256]
• Circular Hole Estimation of stress concentration factor of circular hole in orthotropic plate using a new model based on regression method [Volume 18, Issue 5, 2018, Pages 24-30]
• Circular Hydraulic Jump Experimental Study and Numerical Simulation of the Circular Hydraulic Jump on the Concave Target Plate [Volume 20, Issue 2, 2020, Pages 321-328]
• Circular opening Comparison Buckling load of Cylindrical Shells with seam, Consist of Two Type of Circular or Lozenge Cutouts, by Numerical and Experimental Methods [Volume 16, Issue 12, 2016, Pages 414-424]
• Circular plate Experimental and Analytical Investigation into Plastic Deformation of Circular Plates Subjected to Hydrodynamic Loading [Volume 15, Issue 2, 2015, Pages 305-312]
• Circular plate Experimental and numerical investigation of the maximum deflection of circular aluminum plate subjected to free air explosion [Volume 15, Issue 1, 2015, Pages 219-226]
• Circular plate Effect of cavitation time on elstoplastic response of circular underwater plate subjected to explosive loading [Volume 15, Issue 11, 2015, Pages 88-96]
• Circular plate Experimental and numerical analysis of the effect of immersion depth on the natural frequencies of a bounded circular plate submerged near the water free surface [Volume 16, Issue 6, 2016, Pages 396-402]
• Circular plate Low-Velocity Impact Response of Plate with Different Geometries under Hydrodynamic Load: Experimental Investigation and Process Optimization by Response Surface Methodology [Volume 20, Issue 4, 2020, Pages 807-818]
• Circular plate The Influence of Uniform and Localized Blast Loading on the Response of Single-Layered Circular Plates: Experimental Study and Regression Analysis Using Response Surface Methodology [Volume 20, Issue 8, 2020, Pages 2045-2060]
• Circular plate Behavior of Monolithic and Multi-Layered Aluminum Plates under Multiple Uniform Impulsive Loading: Experimental Study and Neural Network Modelling [Volume 20, Issue 9, 2020, Pages 2313-2329]
• Circular plate of variable thickness The Analysis of thermal buckling of circular plates of variable thickness from functionally graded materials [Volume 12, Issue 5, 2012, Pages 59-73]
• CIRCULAR PLATES Effect of functionally graded microstructure on dynamic stability of piezoelectric circular plates [Volume 14, Issue 1, 2014, Pages 140-148]
• Circular Rotor Numerical Investigation of the Effects of Geometrical Parameters of a Viscous Micro-pump on the Flow Rate and Entropy Generation . [Volume 15, Issue 3, 2015, Pages 291-302]
• Circular Rotor Analysis of Effects of Geometrical and Operational Parameters of Viscous Micropump with the Approach to Entropy Generation Minimization by LBM [Volume 16, Issue 3, 2016, Pages 67-78]
• Circular Sandwich Panel Experimental and analytical study of transverse displacement of plates in a circular sandwich structure with vertical metal tube cores under free blast load [Volume 24, Issue 8, 2023, Pages 511-522]
• Circular Sandwich Structure Experimental and Analytical Study of the Dynamic Response of Sandwich Structure with Grooved Vertical Tube Cores under Free Blast Load [Volume 25, Issue 6, 2024, Pages 345-357]
• Circular tubes Numerical and Experimental Study of a Diamond Collapse of a Thin wall Tube Energy-Absorber with Caps under Dynamic Axial Loading (2) [Volume 15, Issue 2, 2015, Pages 169-178]
• Circular tunnels Investigation of stress field around circular tunnels with concrete lining using complex potential functions [Volume 15, Issue 1, 2015, Pages 267-276]
• Circumferential crack in cylinder Thermoelastic analysis of circumferential cracks in thick-walled cylinders considering dual-phase lag theory [Volume 16, Issue 12, 2016, Pages 249-258]
• Circumferential weld Investigating the influence of effective parameters on the residual stresses in circumferentially arc welded thin walled cylinders of aluminum alloy series 5000 [Volume 15, Issue 3, 2015, Pages 377-386]
• CJ point Investigating the domain length for simulation of gaseous detonation [Volume 15, Issue 1, 2015, Pages 277-284]
• CK45 Improving the Performance of Spot Welds in Galvanized Steel Sheets using RGO Reinforcement and Recycled CK45 Steel Chips: A Step Toward Green Welding [Volume 25, Issue 11, 2024, Pages 725-734]
• Ck45 steel Experimental study of ratcheting influence on fatigue life of Ck45 in uniaxial cyclic loading [Volume 13, Issue 10, 2013, Pages 75-83]
• CK75 Experimental Investigation of Warm Deep Drawing Process of Eutectoid Steel [Volume 20, Issue 6, 2020, Pages 1601-1609]
• Clad Investigation on microstructure and wear resistance of in-situ composites coating product by gas tungsten arc welding on 304 stainless steel [Volume 17, Issue 5, 2017, Pages 119-128]
• Cladding Cladding of Carbon Steel with Aluminum Stainless Layer Using Friction Stir Welding Method [Volume 17, Issue 4, 2017, Pages 410-418]
• Clad sheet Work hardening effect in theoretical and experimental analyses of clad sheet forging process [Volume 16, Issue 7, 2016, Pages 43-50]
• Clamped-clamped microbeam Dynamic analysis of a micro beam based on sub-harmonic parametric excitation [Volume 17, Issue 5, 2017, Pages 374-384]
• Clamped-Hinged Beam Investigating the internal resonance and energy exchange between the vibration modes of a cracked beam [Volume 19, Issue 9, 2019, Pages 2139-2148]
• Clamped rectangular micro-plates Presenting a size-dependent electro-mechanical model for rectangular plates-based resonant micro-sensors based on modified couple stress theory [Volume 14, Issue 8, 2014, Pages 121-130]
• Clamping System Design Design of clamping system for workpiece with freeform geometry [Volume 16, Issue 9, 2016, Pages 195-206]
• Classical Control Nonlinear Dynamic Inversion Controller Design for a Satellite, Considering the Dynamics of Magnetorquers [Volume 19, Issue 8, 2019, Pages 1875-1887]
• Classical laminated plate theory Post-buckling of laminated plates using collocation method and Legendre basis functions [Volume 16, Issue 4, 2016, Pages 213-220]
• Classical Laminate Theory Applications of the Incremental Hole-Drilling Method for Measurement of Non-Uniform Residual Stresses in Fiber Metal Laminates [Volume 15, Issue 6, 2015, Pages 335-345]
• Classic yield criterion Numerical analysis of the effect of advanced yield criterion on prediction of strains and stresses in anisotropic aluminum sheets [Volume 15, Issue 8, 2015, Pages 393-401]
• Classification Ultrasonic Damage Classification in pipes and plates using Wavelet Transform and SVM [Volume 15, Issue 5, 2015, Pages 41-48]
• Classifier Application of DWT for Acoustic Signal Identification of Ships Using Feature Extraction Methods and Ensemble Learning [Volume 15, Issue 8, 2015, Pages 75-84]
• Clay The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites [Volume 13, Issue 13, 2013, Pages 157-164]
• Clay Nanoparticle Reinforcing Effect of Nanoclay on Buckling Behavior of Nanocomposite Grid Shells: Experimental Investigation [Volume 15, Issue 3, 2015, Pages 411-418]
• Clay Nanoparticles Studies on the Tensile and Flexural Properties of TETA-Cured Epoxy Resins Modified With Clay [Volume 14, Issue 6, 2014, Pages 29-34]
• Clay Nanoparticles Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
• Clay Nanoparticles Effect of Clay Nanoparticles on Increasing the Lifetime of Glass/Epoxy Composites under Thermal and Humidity Conditions (Hydrothermal) [Volume 20, Issue 3, 2020, Pages 701-708]
• Clear Liquid Height Numerical Simulation of the Hydrodynamics of Two Phase Flow in Distillation Column Sieve Trays [Volume 18, Issue 2, 2018, Pages 401-412]
• Cleavage Fracture An Investigation on Mechanical Properties of 42CrMo4 Steel with Tempered Martensite and Ferrite-Bainite-Martensite Microstructure [Volume 10, Issue 1, 2010, Pages 63-76]
• Clift Graph Numerical and Experimental Investigation of the Rising Shape Regime of the Air Bubble Injected into the Water Column [Volume 20, Issue 1, 2020, Pages 97-106]
• Climatic conditions Thermal Performance Investigation of Residential Buildings with Cool and Green Roofs under Different Climates of Iran [Volume 20, Issue 7, 2020, Pages 1883-1894]
• Clohessy-Wiltshire Nonlinear Optimal Control of Orbital Rendezvous Problem for Circular and Elliptical Target Orbit [Volume 15, Issue 12, 2015, Pages 132-142]
• Closed-cell foams Geometrical modeling of closed-cell metal foams using Stochastic cells generation [Volume 14, Issue 3, 2014, Pages 129-135]
• Closed-Cell Metal Foams Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
• Closed Circuit Wet Cooling Tower Experimental and Numerical Study of Closed Circuit Wet Cooling Tower and Heat Transfer Coefficients Calculation on the Outer Surface of Hot Water Tubes [Volume 20, Issue 4, 2020, Pages 901-913]
• Closed cycle diesel engine Numerical study of the effect of replacing nitrogen with helium-carbon ‎dioxide on diesel engine combustion [(Articles in Press)]
• Closed-form Solution Closed-form solution of circular and annular plates with elastic boundary conditions under non-uniform normal and shear loads [Volume 16, Issue 6, 2016, Pages 29-40]
• Closed-loop Kinematics A Novel Closed-Loop Calibration of a 5-DOF Robot Manipulator [Volume 12, Issue 1, 2012, Pages 98-105]
• Close Modes Identification of Closely Spaced Modes Using Operational Modal Testing [Volume 13, Issue 3, 2013, Pages 102-116]
• Clothing Evaluation of Thermal and Moisture Inertia Effects in Clothing and Gagge’s Model Modification for Body Thermal Sensation and Physiological Responses Estimation [Volume 14, Issue 3, 2014, Pages 167-175]
• Clothing Evaluating the effects of layer arrangement of a porous clothing on heat and mass transfer from the body under cold conditions [Volume 15, Issue 1, 2015, Pages 194-202]
• Cloud Point Data A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
• Cluster Numerical investigation of drag coefficients in 2D parachute-like bodies with permeability assumption [Volume 15, Issue 4, 2015, Pages 188-194]
• Clustering Structural topology optimization considering clustered stress constraints [Volume 18, Issue 1, 2018, Pages 370-378]
• CNC Upgrading the CNC system of hexapod machine tool by adding the five axis tool radius compensation [Volume 16, Issue 7, 2016, Pages 93-98]
• CNC system Machining Free Form Surfaces with Hexapod Machine Tool [Volume 16, Issue 8, 2016, Pages 395-400]
• CNG Effectiveness of performance characters of a SI engine by varying injection start position of gasoline and natural gas fuels [Volume 15, Issue 8, 2015, Pages 134-142]
• CNG Experimental, numerical and Optimization study of Composite Tanks with Non-Metallic Primer (CNG Fourth Type) [Volume 20, Issue 7, 2020, Pages 1789-1800]
• CNG cylinder An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
• CNG-DI Engine Feasibility Study of Partially Stratified Charge Mixture Formation and Its Effects on CNG Direct Injection Engine [Volume 19, Issue 10, 2019, Pages 2329-2338]
• CNG Engine A Numerical Simulation for Prediction of Emission of Single Cylinder CNG Engine [Volume 16, Issue 2, 2016, Pages 329-332]
• CNT Experimental study of ballistic properties of hybrid aluminum and epoxy matrix composite reinforced with carbon nanotube [Volume 17, Issue 8, 2017, Pages 126-132]
• Co Numerical and experimental study of the effect of construction of Amirkabir highway (55 meters) in Arak city on air pollution reduction [Volume 21, Issue 3, 2021, Pages 195-208]
• CO2 Study of heat-affected zone (HAZ) caused by cutting of Thin Ti-CP Sheet via CW CO2 Laser [Volume 17, Issue 5, 2017, Pages 253-259]
• CO2 concentration Study the impact of caulking modern windows on air infiltration rate and indoor air quality [Volume 16, Issue 11, 2016, Pages 23-34]
• CO2 concentration Proposing of practical relation to estimate amount indoor air pollutants [Volume 17, Issue 2, 2017, Pages 446-450]
• CO2 Cryogenic Cooling Investigating the Effects of Flow Rate and Spraying Methods of CO2 Fluid on Tool Wear and workpiece Surface Quality in Cryogenic Turning of 304-L Stainless Steel [Volume 20, Issue 4, 2020, Pages 819-832]
• CO2 transcritical Exergy and Exergoeconomic analysis and optimization of cogeneration cycle under solar radiation dynamic model by using Genetic Algorithm [Volume 15, Issue 5, 2015, Pages 205-216]
• CO2 transcritical A novel design and analysis of organic Rankine cycle using gas turbine prime mover Case study: Nar-Kangan (south of Iran) [Volume 17, Issue 12, 2017, Pages 361-372]
• Coach Peel Specimen Experimental Investigation of Crack Initiation and Fatigue Life of Spot Weld Coach Peel Specimens [Volume 8, Issue 1, 2008, Pages 99-114]
• Coalescence of Bubbles Numerical study of the uniform magnetic field effect on the interaction of bubbles in a viscous liquid column [Volume 15, Issue 11, 2015, Pages 293-302]
• Coal Fuel Simulation and Comparison of the Effect of Oxidizing Gas and Different Devolatilization Models in an Entrained-Flow Coal Gasifier [Volume 19, Issue 12, 2019, Pages 3071-3082]
• Coal mine Numerical Simulation to improve underground room and pillar coal mine ventilation using stoppings and brattice [Volume 16, Issue 5, 2016, Pages 312-320]
• Coal particles Experimental study on the effect of coal particles injection on flame structure, radiation heat transfer, temperature distribution and thermal efficiency in natural gas diffusion flames [Volume 14, Issue 7, 2014, Pages 163-168]
• Coanda Effect Experimental and Numerical Investigation of Using Coanda Effect for Producing Underwater Propulsion [Volume 20, Issue 3, 2020, Pages 777-786]
• Coarse-Graining Model Development of Coarse-Graining Methods for Modeling of Silicon Nanostructures [Volume 17, Issue 4, 2017, Pages 267-276]
• Coarse grain molecular dynamics Coarse grain molecular dynamics simulation of drug carrier penetration into cell membrane [Volume 14, Issue 15, 2014, Pages 316-322]
• Coarse grid The Localization Error in the Multi-scale Finite Volume Method for Incompressible flow in Porous media [Volume 15, Issue 10, 2015, Pages 341-350]
• Coarse Grid CFD (CGCFD) Investigation of Trailing Edge Flapping on Lift Coefficient of NACA0015 Airfoil in Low Angles of Attack [Volume 14, Issue 2, 2014, Pages 175-187]
• Coarse-scale transmissibility Performance of the Multi-resolution Multi-scale Finite Volume Method for Solving Pressure Equation in Highly Heterogeneous Porous Media [Volume 16, Issue 8, 2016, Pages 384-394]
• Coated Glazing Measurement of Radiative Properties of Coated Glazing Systems and Evaluation of their Influence on Energy Consumption [Volume 15, Issue 8, 2015, Pages 402-410]
• Coating Preparation of Alumina Particles Coated with a Thin Layer of Amorphous Thermoplastic via Phase Inversion Process for Indirect SLS Applications [Volume 18, Issue 7, 2018, Pages 131-141]
• Coating Damage initiation and propagation simulation of coatings in coating/substrate structures under thermal loading using discrete element method [Volume 18, Issue 8, 2018, Pages 163-172]
• Coating thickness Feasibility Study of Creating Chrome and Copper Coatings on Stainless Steel Using Electric Discharge Coating Method [Volume 22, Issue 10, 2021, Pages 125-129]
• Coaxial Annuli Effects of Fin Presence and change the Aspect Ratio on Natural Convection in Coaxial Annuli [Volume 17, Issue 3, 2017, Pages 10-18]
• Coefficient of thermal performance Simulation Study on the Thermal Performance of a direct-expansion solar-assisted heat pump for water heating in Kermanshah climate [Volume 15, Issue 12, 2015, Pages 232-242]
• Coercivity Optimization of Process Parameters Effects on Coercivity Force of Selective Laser Melted Iron Samples [Volume 23, Issue 10, 2022, Pages 21-27]
• Co-firing Numerical Simulation of Co-Firing of Biomass-Sulfide Concentrate and Pollutants Formation in the Flash Furnace Copper Smelting [Volume 19, Issue 12, 2019, Pages 2927-2934]
• Cogeneration heat and power Constructal Theory Application for Cogeneration Heat and Power Total Site Retrofit [Volume 15, Issue 8, 2015, Pages 143-152]
• Cogeneration of heat and power Energy, exergy, economic, environmental (4E) analyses of a solar organic Rankine cycle to produce combined heat and power [Volume 16, Issue 10, 2016, Pages 229-240]
• Cohesion Between Concrete and Steel Investigating the Static Behavior of Columns with Steel Sections Filled with Concrete [Volume 24, Issue 11, 2023, Pages 121-127]
• Cohesive crack Damage Detection Based on System Identification of Concrete Arch Dam using XFEM Based Cohesive Crack Segments and Wavelet Transform [Volume 16, Issue 12, 2016, Pages 373-383]
• Cohesive Element Numerical investigation of dynamic crack growth in steel pipes under internal detonation loading [Volume 17, Issue 9, 2017, Pages 214-224]
• Cohesive Element Experimental and numerical determination of forming limit diagram of steel-copper two-layer sheet considering the interface between the layers [Volume 18, Issue 6, 2018, Pages 174-181]
• Cohesive interface element Analysis of composite skin/stringer debonding and failure under static loading using cohesive zone model [Volume 14, Issue 10, 2014, Pages 17-25]
• Cohesive zone Evaluation of the matrix cracking and induced delamination formation in cross-ply composite laminates under tension loading [Volume 17, Issue 10, 2017, Pages 375-384]
• Cohesive Zone Element Investigation of Bonding Strength of Steel/Stainless Steel Bimetallic Rod [Volume 19, Issue 1, 2019, Pages 105-113]
• Cohesive zone model Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models [Volume 13, Issue 1, 2013, Pages 38-48]
• Cohesive zone model Numerical study of the effect of moisture–induced swelling stresses on damage behavior of adhesive joints under static loading [Volume 15, Issue 3, 2015, Pages 189-198]
• Cohesive zone model Experimental and Numerical Analysis of Thermal Barrier Coatings Failure under Thermal Fatigue Loading [Volume 16, Issue 3, 2016, Pages 285-294]
• Cohesive zone model Numerical and experimental investigation of skin/core debonding in composite sandwich structures with corrugated core under bending loading [Volume 16, Issue 6, 2016, Pages 52-62]
• Cohesive zone model Simulation and strength and fatigue life improvement of adhesively bonded single lap joint using cohesive zone model with cyclic degrading [Volume 16, Issue 5, 2016, Pages 281-289]
• Cohesive zone model Experimental Measurement of Parameters for High Velocity Impact Simulation on Composite Plate Based On PDM and CZM [Volume 19, Issue 9, 2019, Pages 2215-2226]
• Cohesive zone model Measurement of face to core debonding fracture toughness of core grooved sandwich structures under mode I of loading [Volume 21, Issue 4, 2021, Pages 263-272]
• Cohesive zone model (CZM) Experimental and Computational Analysis of Fracture Load and Pattern of Femur using Cohesive Zone Model [Volume 15, Issue 10, 2015, Pages 192-200]
• Coil Prediction of the friction factor of the coil side in shell and coiled tube heat exchangers using numerical method [Volume 16, Issue 4, 2016, Pages 297-306]
• Coincidence Frequency Studying the effect of sound absorber materials in acoustical behavior of double-wall cylindrical shell [Volume 15, Issue 4, 2015, Pages 331-338]
• Cold condition Evaluating the effects of layer arrangement of a porous clothing on heat and mass transfer from the body under cold conditions [Volume 15, Issue 1, 2015, Pages 194-202]
• Cold drawing of tube Experimental and numerical investigation of cold drawing process of 410 stainless steel tube [Volume 23, Issue 7, 2022, Pages 387-394]
• Cold EGR Experimental investigation of effects of engine cooling temperature, EGR and injection timing to reduce NOx emissions in the diesel engines [Volume 11, Issue 4, 2011, Pages 1-9]
• Cold Gas Thruster Hardware-in-the-loop simulation for Attitude Control of a Suborbital Module using Cold Gas Thrusters [Volume 14, Issue 10, 2014, Pages 177-186]
• Cold Gas Thruster Using Air-Bearing Based Platform and Cold Gas Thruster Actuator for Satellite Attitude Dynamics Simulation [Volume 14, Issue 12, 2014, Pages 1-12]
• Cold Hardening Mechanical and microstructural properties evaluation of AISI4130 steel after backward flow forming process [Volume 23, Issue 3, 2022, Pages 183-190]
• Cold Pre-Strain The Effect of Cold Pre-Strain on the Tensile and Compressive Strength of Inconel 718 Superalloy Produced by Selective Laser Melting [Volume 24, Issue 8, 2023, Pages 475-484]
• Cold roll bonding New Strategy to Simultaneous Increase in Strength and Electrical Conductivity of UFG Copper Strip Fabricated via Accumulative Roll Bonding- Cold Roll Bonding [Volume 19, Issue 9, 2019, Pages 2085-2092]
• Cold roll forming Prediction of Required Torque in Cold Roll Forming Process of a Channel Sections Using Artificial Neural Networks [Volume 15, Issue 7, 2015, Pages 209-214]
• Cold Roll Forming Process of Pipe Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2017, Pages 259-270]
• Cold rolling Investigation on temperature changes of Mg cold rolling process with the Coupled Eulerian-Lagrangian (CEL) method [Volume 17, Issue 10, 2017, Pages 123-128]
• Cold Spin Bonding Experimental investigation of heat treatment and deformation rate effects on aluminum-steel bonding in cold spin-bonding process [Volume 15, Issue 5, 2015, Pages 350-356]
• Cold Spray A comparative study between Johnson-Cook and PTW models in simulation of cold spray process [Volume 14, Issue 2, 2014, Pages 188-194]
• Cold stimulation Empirical assessment of the individual and physiological factors affecting the thermal response of human hands under intense cold stimulation [Volume 18, Issue 1, 2018, Pages 355-360]
• Cold storage Experimental study of the effect of using wavy pipes and pipe with straps fins on the improvement of the ice formation rate in ice-on-coil thermal storage systems [Volume 22, Issue 3, 2021, Pages 143-152]
• Collaborative Optimization (CO) Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
• Collapse behavior Experimental and Numerical Study of Conical Thin Shells Collapse under Dynamic Axial Loadings. [Volume 15, Issue 7, 2015, Pages 392-402]
• Collapse behavior Experimental and numerical study on the collapse behavior of double walled tubes reinforced with inside ribs under dynamic axial loading [Volume 16, Issue 9, 2016, Pages 347-358]
• Collapsing Behavior Optimum design and construction of cylindrical energy absorber under internal pressure using time evolutionary optimization algorithm [Volume 23, Issue 1, 2022, Pages 45-55]
• Collar Forming Experimental and Numerical Study of the Affecting Parameters on Single Point Incremental Forming Process of Perforated Aluminum-Copper Bimetal Sheet [Volume 20, Issue 6, 2020, Pages 1533-1542]
• Collection efficiency Numerical Investigation of Ambient Temperature and Actual Impactor Plates Effects on Its Efficiency [Volume 19, Issue 6, 2019, Pages 1327-1335]
• Collision avoidance Collision-Free Navigation and Control for Autonomous Vehicle in Complex Urban Environments [Volume 17, Issue 11, 2017, Pages 277-288]
• Collision avoidance Motion Planning in Critical Lane Change Maneuvers Considering the Stability Margins of the Vehicle [Volume 24, Issue 4, 2023, Pages 225-238]
• Collision-Free Conditions Optimal Trajectory Planning and Obstacle Avoidance of a Manipulator in the Presence of Ellipsoidal Obstacles Using Genetic Algorithms [Volume 10, Issue 4, 2010, Pages 75-84]
• Collision velocity Experimental study of contact velocity effect on spreading factor of non-Newtonian and Newtonian droplets during collision with dry solid surface [Volume 18, Issue 3, 2018, Pages 146-152]
• Collison avoidance Motion planning of mobile robots in the unknown circumstances based on the receding horizon control and velocity obstacle concepts [Volume 17, Issue 11, 2017, Pages 259-268]
• Color Noise Optimal state estimation of a dynamical system corrupted with colored noises using Mixed Kalman/H-infinity filter [Volume 14, Issue 12, 2014, Pages 67-74]
• Columnar Microstructural and Mechanical Investigation of the Joint of Aluminum Alloy 6061 with CO2 Laser High Power Welding Machine [Volume 20, Issue 2, 2020, Pages 449-456]
• Column Flotation Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
• Column Flotation Scale up Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
• Combined Attitude and Thermal Control System (CATCS) Design of Satellite’s Combined Attitude and Thermal Control System Equipped with FMC Actuators [Volume 18, Issue 1, 2018, Pages 122-130]
• Combined Cogeneration Cycle Energy and Exergoeconomic analysis of combined cogeneration Gas Turbine-Modular Helium Reactor, Kalina cycle and absorption refrigeration cycle [Volume 18, Issue 6, 2018, Pages 113-121]
• Combined Convection Multidimensional Characteristic Modeling of Combined Convection Flows [Volume 18, Issue 6, 2018, Pages 1-11]
• Combined Cycle Two-objective optimization of using combined cycle power plants waste for heating application [Volume 12, Issue 4, 2012, Pages 120-132]
• Combined Cycle Thermal analysis and efficiency optimization of an Otto-Stirling combined cycles with SI engine exhaust heat recovery [Volume 16, Issue 2, 2016, Pages 147-158]
• Combined Cycle Potential assessment and techno-economic optimization of conversion of combined cycle power plant into a water and power co-generation system [Volume 18, Issue 2, 2018, Pages 189-200]
• Combined Cycle Power Plant Field study of the effect of various gas turbine and supplementary firing operating modes on the performance of a real combined cycle power plant [Volume 21, Issue 5, 2021, Pages 285-295]
• Combined Cycle" Investigation of Full Repowering Effects on Techno-Economic properties of a Steam Power Plant [Volume 11, Issue 1, 2011, Pages 1-18]
• Combined Electrode Investigating the Mechanical Properties and Microhardness of the Combined Electrode with Wire Arc Additive Manufacturing Based on Gas Metal Arc Welding [Volume 23, Issue 10, 2022, Pages 177-181]
• Combined electroosmotic/pressure driven flows Investigation of non-Newtonian fluid mixing in combined electroosmotic/pressure driven flows inside nonhomogeneous microchannel with rectangular obstacles [Volume 17, Issue 4, 2017, Pages 331-340]
• Combined Hardening Model Study of Ratcheting Behavior of 304L Stainless Steel Branch Pipes by Using Chaboche and Combined Hardening Models [Volume 19, Issue 9, 2019, Pages 2193-2201]
• Combined Hardening Model The Effect of Temperature and Bending Moments on the Strain Accumulation of Carbon Steel Piping Branch [Volume 22, Issue 7, 2021, Pages 461-471]
• Combined Heat and Power Effect of Condensation on the Heat Transfer of a Shell and Tube Heat Exchanger with Use of Combined Heat and Power Generation [Volume 20, Issue 2, 2020, Pages 297-310]
• Combined heat and power (CHP) system Thermoeconomic performance analysis of a small-scale CHP system based on diesel engine [Volume 16, Issue 10, 2016, Pages 375-383]
• Combined heating and power Design and Feasibility Analysis of a HVAC System based on CCHP, Solar Heating and Ice Thermal Storage for Residential Buildings [Volume 22, Issue 2, 2021, Pages 81-92]
• Combined heating and power CHP Modeling of combined heating and power system driven by Stirling engine from the perspective of the fuel consumption and pollution emission [Volume 17, Issue 10, 2017, Pages 301-311]
• Combined steam and organic rankine cycle Performance comparsion of different configuration of steam and organic rankin cycle with parabolic trough solar collector [Volume 16, Issue 12, 2016, Pages 534-544]
• Combined steam and organic Rankine cycles Simulation of combined steam and organic rankine cycle from energy and exergoeconomic point of view with exhaust gas source [Volume 16, Issue 7, 2016, Pages 308-316]
• Combined Targets Experimental and Numerical Investigation of Ballistic Impact on Ceramic–Metal Combined Targets with Different Nosed Projectiles [Volume 20, Issue 3, 2020, Pages 677-687]
• Combustion chamber Optimization of Micro Gas Turbine Combustion Chamber by Changing the Swirler Numerically and Experimentally [Volume 22, Issue 7, 2021, Pages 473-483]
• Combustion chamber 3D Simulation of the Annular Combustion Chamber of a Micro-Turbine with Hydrogen-Methane Mixture and Partially Premixed Combustion Model [Volume 24, Issue 12, 2023, Pages 727-738]
• Combustion in diesel engine 3D Simulation of Performance and Pollution of Hydrogen-Diesel Combustion in Heavy Duty Engine [Volume 17, Issue 3, 2017, Pages 177-186]
• Combustion in Micro Scale Dynamics of lean hydrogen/air flame regimes in micro scale combustion [Volume 14, Issue 3, 2014, Pages 94-102]
• Combustion in small scale Numerical study of bluff body effect on lean premixed hydrogen/air combustion in a micro- scale combustor [Volume 14, Issue 13, 2014, Pages 86-94]
• Combustion Models Investigation of Combustion Models in Numerical Simulation of Cement Rotary Kiln [Volume 15, Issue 7, 2015, Pages 199-208]
• Combustion Simulation Comparison of some global chemical kinetics effects on methane lifted flame 3D simulation [Volume 17, Issue 8, 2017, Pages 105-116]
• Combustion Simulation Numerical study of the effect of replacing nitrogen with helium-carbon ‎dioxide on diesel engine combustion [(Articles in Press)]
• Comfort Multi-Objective Optimization of Comfort-Cost for Cooling and Heating Systems at the Faculty of Engineering of Arak University [Volume 20, Issue 3, 2020, Pages 531-537]
• Comfortable Zone Determining Thermal Comfort Period for Tabriz [Volume 10, Issue 4, 2010, Pages 37-44]
• Comfort Set-Point Anti-Insulation in Building Energy Consumption; Comparison of Eight Climates of Iran [Volume 20, Issue 6, 2020, Pages 1487-1500]
• Commercially Pure Titanium Effect of work-piece cross section on the mechanical properties of commercially pure titanium produced by Equal Channel Angular Pressing [Volume 15, Issue 6, 2015, Pages 157-166]
• Commercially Pure Titanium The investigation of springback of UFG commercially pure titanium in three-point bending test [Volume 16, Issue 11, 2016, Pages 266-276]
• Commercial pure titanium Utilization of multi directional forging for fabrication of ultrafine-grained pure titanium [Volume 18, Issue 2, 2018, Pages 371-382]
• Commercial pure titanium Effect of Grain Size Reduction thruogh Multi Directional Forging Process on Corrosion and Wear Properties of Commercially Pure Titanium [Volume 20, Issue 3, 2020, Pages 623-636]
• Commercial Refrigerator Radiative Heat Transfer Survey from Commercial Refrigerators [Volume 9, Issue 1, 2009, Pages 1-14]
• Common knot vector Construction of smooth B-spline surfaces based on improving data point distribution [Volume 14, Issue 13, 2014, Pages 27-36]
• Common Refrigeration System A feasibility study on substitution of environmentally friendly refrigerants in common refrigeration systems [Volume 16, Issue 12, 2016, Pages 779-782]
• Compact Finite Difference Direct Numerical Simulation of 2D Forced Jet using the Compact Finite Difference Method [Volume 10, Issue 3, 2010, Pages 9-20]
• Compact finite-difference schemes Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
• Comparison of Fan-On and Fan-Off Condition Numerical Analysis of the Effect of Train Movement Inside Underground Subway Tunnels on the Air-Exchange Systems by Comparing Fan-Off and Fan-On Conditions [Volume 19, Issue 11, 2019, Pages 2679-2687]
• Comparison with experimental results PERFORMANCE ANALYSIS OF RADIAL FLOW TURBINE OF A COOLING TURBINE USING NUMERICAL SIMULATION AND COMPARISON WITH EXPERIMENTAL RESULTS [Volume 13, Issue 14, 2013, Pages 137-149]
• Compatible algorithms Numerical Solution of coupled Flow and Mass Transport equations in porous medium Using Discontinuous Galerkin Method [Volume 16, Issue 11, 2016, Pages 397-408]
• Compensation error The analysis of tool deflection error and hydraulic mechanism for its compensation in machining [Volume 23, Issue 1, 2022, Pages 57-66]
• Complementary Integral Method Complementary Integral Method for Enforcing the Essential Boundary Conditions in the EFG Method and its Application in Static and Dynamic Problems [Volume 6, Issue 1, 2006, Pages 61-78]
• Complete Longitudinal Dynamic Model The Design of Adaptive Cruise Control based on Macroscopic Traffic behavior applying Model Predictive Control to reduce Pile up [Volume 17, Issue 10, 2017, Pages 81-92]
• Complex Averaging method Investigation of energy harvesting from vibrating nonlinear Timoshenko beam under base oscillating with electromagnetic energy harvester [Volume 15, Issue 1, 2015, Pages 131-140]
• Complex DoF Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
• Complex Eigenvalue The Effects of Viscoelastic Material on Brake Squeal Considering Complex Eigenvalue Method [Volume 13, Issue 14, 2013, Pages 160-170]
• Complex Eigenvalue Vibration Analysis of Fluid Conveying Viscoelastic Pipes Rested on Non-Uniform Winkler Elastic Foundation [Volume 16, Issue 12, 2016, Pages 87-94]
• Complexification Averaging method Response regime of nonlinear bistable energy harvester [Volume 18, Issue 5, 2018, Pages 57-65]
• Complex potential functions Investigation of stress field around circular tunnels with concrete lining using complex potential functions [Volume 15, Issue 1, 2015, Pages 267-276]
• Complex Steerable Pyramid Modal Identification of Structures via Processing of Recorded Videos and Output-only Algorithms [Volume 21, Issue 1, 2021, Pages 39-53]
• Complex terrain Numerical simulation of wind turbine in Manjil wind farm considering wind regime study [Volume 17, Issue 9, 2017, Pages 75-85]
• Complex Variable Thermal stress analysis of metallic plate with quasi-rectangular hole [Volume 15, Issue 3, 2015, Pages 19-26]
• Complex variable method Analytical solution to calculate the stress distribution around a triangular hole in finite isotropic plates under in-plane loading [Volume 15, Issue 5, 2015, Pages 165-175]
• Complex variable method Optimization of finite metallic plates with quadrilateral cutout subjected to in- plane loading by Ant Lion Optimizer [Volume 17, Issue 1, 2017, Pages 11-22]
• Complex variable method Estimation of stress concentration factor of circular hole in orthotropic plate using a new model based on regression method [Volume 18, Issue 5, 2018, Pages 24-30]
• Complex-Wavy-Wall Numerical simulation of free convection heat transfer of nanofluid in a wavy-wall cavity with sinusoidal temperature distribution, using lattice Boltzmann method [Volume 16, Issue 9, 2016, Pages 143-154]
• Compliance mismatch The effects of compliance mismatch on the End to Side bypass graft [Volume 15, Issue 5, 2015, Pages 279-286]
• Compliant Mechanism Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2023, Pages 631-641]
• Complicated Parts Calibration and error compensation of a 4-DOF milling machine with parallel mechanism [Volume 23, Issue 5, 2022, Pages 317-322]
• Composit Optimization of Drilling Parameters of Carbon Fiber Composites using RSM-Based Utility Function [Volume 23, Issue 10, 2022, Pages 237-243]
• Composite Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
• Composite The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
• Composite Improve the accuracy of fracture toughness equation coefficients resulting from irregular surface cracks generated by Vickers test of B4C-C composites [Volume 13, Issue 2, 2013, Pages 12-21]
• Composite Experimental investigation on ballistic behavior of sandwich panels made of honeycomb core [Volume 14, Issue 4, 2014, Pages 21-26]
• Composite Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM and experiment [Volume 13, Issue 1, 2013, Pages 95-106]
• Composite Analytical and experimental investigation into the crushing behavior of hat shaped composite energy absorber [Volume 14, Issue 14, 2014, Pages 211-216]
• Composite Design and manufacturing of modified Iosipesque shear test fixture for determine the in layered composite properties [Volume 15, Issue 3, 2015, Pages 75-83]
• Composite A parametric study of the free vibration analysis of composite sandwich plate with magneto-rheological smart core [Volume 15, Issue 11, 2015, Pages 396-404]
• Composite Investigating the Effect of single wall carbon nanotubes in the context of epoxy resin on the electromagnetic waves in the X-band [Volume 16, Issue 5, 2016, Pages 81-89]
• Composite Analysis of laminated composite sandwich plates with magnetorheological fluid core under low velocity impact [Volume 16, Issue 12, 2016, Pages 114-124]
• Composite Analysis of linear vibrational behavior of anisogrid lattice composite conical shells formed by helical ribs [Volume 17, Issue 3, 2017, Pages 251-262]
• Composite Analysis of composite beam, having initial geometric imperfection, subjected to off-center impact [Volume 17, Issue 5, 2017, Pages 185-192]
• Composite Static and free vibration isogeometric analysis of laminated composite plates integrated with piezoelectric using Reissner–Mindlin theory [Volume 17, Issue 11, 2017, Pages 181-191]
• Composite Investigation of displacement amplitude effect on failure mechanisms in open-hole laminated composites under low-cycle fatigue loading using acoustic emission [Volume 17, Issue 12, 2017, Pages 435-445]
• Composite The flutter speed and effect of laminate layers of composite wing carrying two powered engines [Volume 18, Issue 2, 2018, Pages 314-322]
• Composite Manufacturing and Investigating Mechanical Properties of Polymeric Composites Reinforced with Natural Fibers [Volume 19, Issue 1, 2019, Pages 75-83]
• Composite Aeroelastic Analysis of a Double-Sweep Wing with the Metal/Composite Sections [Volume 19, Issue 4, 2019, Pages 927-935]
• Composite Effect of Friction Stir Processing On Microstructure and Mechanical Properties of the A390/Sic Composite: The Effect of Shoulder Diameter to Pin Diameter Ratio and Number of Passes [Volume 20, Issue 1, 2020, Pages 35-44]
• Composite Fabrication and Mechanical Characterization of TiB2-Graphene Reinforced AA 6061 Composite by Friction Stirr Processing [Volume 20, Issue 3, 2020, Pages 611-621]
• Composite Experimental, numerical and Optimization study of Composite Tanks with Non-Metallic Primer (CNG Fourth Type) [Volume 20, Issue 7, 2020, Pages 1789-1800]
• Composite Modeling Bistable Behaviors in Exposure of Thermo-Viscoelastic Conditions by Link-Spring-Dashpot Structures [Volume 21, Issue 9, 2021, Pages 589-600]
• Composite Effect of severe plastic deformation by multidirectional forging on mechanical properties of Ti modified SiP/ZA22 composite [Volume 21, Issue 10, 2021, Pages 707-718]
• Composite Ballistic Performance Analysis of Ultra High Molecular Weight Polyethylene (UHMWPE) Composite [Volume 22, Issue 5, 2021, Pages 347-346]
• Composite Experimental investigation of the effect of using shear-thickening fluid in the structure of honeycomb-core sandwich panels on energy absorption in low-velocity impact loading [Volume 23, Issue 9, 2022, Pages 531-541]
• Composite beam Static analysis of composite box beams by dimensional reduction method [Volume 14, Issue 16, 2014, Pages 367-374]
• Composite beam Static analysis of composite beams with shear deformation effect using polynomials based dimensional reduction method [Volume 15, Issue 6, 2015, Pages 299-308]
• Composite belt Effect of carbon nanotubes on the critical buckling load of composite reinforced aluminium columns: An experimental approach [Volume 20, Issue 12, 2020, Pages 2679-2688]
• Composite Conical Shell Buckling analysis of moderately thick composite conical shells using Galerkin and DQ methods [Volume 15, Issue 12, 2015, Pages 367-375]
• Composite-Copper Joint Process and Macrostructural Analysis of Copper Tube Bonding to Carbon Fiber Composite Tube by Electromagnetic Joining Process [Volume 24, Issue 2, 2023, Pages 65-75]
• Composite curve Effect of feed conditions on the performance of double stage mixed refrigerant LNG system [Volume 16, Issue 10, 2016, Pages 104-114]
• Composite cylindrical shell Experimental and numerical examination of the effect of geometrical imperfection on buckling load in axially compressed composites cylinder with and without cutout [Volume 16, Issue 6, 2016, Pages 367-377]
• Composite drilling Numerical study of delamination in drilling of Glass/Polyester and investigation of mode ΙΙ fracture contribution [Volume 17, Issue 8, 2017, Pages 173-181]
• Composite Fracture Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach [Volume 17, Issue 12, 2017, Pages 505-513]
• Composite Lamina An investigation on the stress concentration factor in unidirectional composite lamina with angled and staggered crack [Volume 15, Issue 12, 2015, Pages 472-480]
• Composite laminate Effect of impactor shape and temperature on the behavior of E-glass/epoxy composite laminates [Volume 14, Issue 10, 2014, Pages 1-8]
• Composite laminate The effect of carbon nanotubes on the life of drilled glass / epoxy composite under fatigue loading [Volume 17, Issue 8, 2017, Pages 399-405]
• Composite laminate Analytical and Numerical study of composite plates under impact loading at low velocity with different strikers [Volume 18, Issue 2, 2018, Pages 53-60]
• Composite laminate Buckling and Postbuckling Analysis of Composite Laminates with Piezoelectric layers using Layerwise Theory [Volume 18, Issue 5, 2018, Pages 202-210]
• Composite laminate Evaluation of Damage in Composite Laminated Sheets with Circular Defects under Tensile Loading Using Digital Image Correlation Method [Volume 20, Issue 4, 2020, Pages 1025-1031]
• Composite laminate Experimental, Analytical, and Numerical Investigation of Damage Mechanics of the Cross-ply Composite Laminate with Matrix Crack [Volume 22, Issue 12, 2021, Pages 759-769]
• Composite laminates Buckling and vibration of symmetrically-laminated composite elliptical plates resting on Winkler-type foundation subjected to initial in-plane stresses [Volume 14, Issue 1, 2014, Pages 19-26]
• Composite laminates Damage assessment of mode II of polymer composite material using a new acoustic emission and finite element methods [Volume 18, Issue 4, 2018, Pages 126-134]
• Composite laminates Investigation the Effect of Loading Rates on Fracture Toughness of Loading Mode I in Glass / Epoxy Composite Laminates by Acoustic Emission [Volume 19, Issue 12, 2019, Pages 2917-2925]
• Composite material An Analytical Solution of Steady State Conductive Heat Transfer in Cylindrical Composite Laminates [Volume 9, Issue 1, 2009, Pages 135-152]
• Composite material Analytical study the ballistic behavior of thin laminated composite plates based on tsai-hill and maximum strain criterions [Volume 17, Issue 6, 2017, Pages 41-50]
• Composite material Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2017, Pages 229-238]
• Composite Materials Study of Residual Tensile Strength in Drilled Composite Laminates by Acoustic Emission [Volume 13, Issue 15, 2013, Pages 169-183]
• Composite Materials A Numerical study of failure modes of a composite plate subjected to hail ice impact [Volume 17, Issue 12, 2017, Pages 77-86]
• Composite Materials Utilizing Acoustic Emission for Studying Scaling and Layup Configuration Effect on Behavior of Glass/Epoxy Composite Materials Under Low-Velocity Impact [Volume 21, Issue 11, 2021, Pages 719-728]
• Composite Patch Investigation of failure mechanisms of notched aluminum plates repaired with composite patches using acoustic emission method [Volume 17, Issue 8, 2017, Pages 406-412]
• Composite Patch Computation of stress intensity factors and T- stress for cracks repaired by single and double composite and metallic patches [Volume 18, Issue 3, 2018, Pages 369-379]
• Composite Patch Experimental Study of the Effects of Rectangular and H-Shaped Woven Nanocomposites Patch on tensile properties of Repaired AL5251 Sheets [Volume 22, Issue 3, 2021, Pages 201-211]
• Composite patches An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
• Composite plate Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
• Composite plate Progressive Damage Analysis of Laminated Composite Plate Subjected to Bending Fatigue [Volume 15, Issue 2, 2015, Pages 72-80]
• Composite Repair of Steel Structures Investigating the Crack Propagation at the Surface of the Composite Patch Bonding to the Steel Substrate [Volume 19, Issue 8, 2019, Pages 1897-1906]
• Composite Rupture disc Numerical simulation of a composite Rupture disc by considering the nonlinear strain path [Volume 21, Issue 7, 2021, Pages 469-478]
• Composites Simple method for buckling load of composite conical Lattice structures under axial load [Volume 14, Issue 15, 2014, Pages 290-298]
• Composites Experimental and numerical investigation of crack growth in adhesive bonding of two composites plates under mode I [Volume 16, Issue 5, 2016, Pages 271-280]
• Composites The Investigation of mechanical and metallurgical properties of multi-layered Al/Cu composite produced by Accumulative Press Bonding (APB) process [Volume 17, Issue 2, 2017, Pages 109-114]
• Composites Non-destructive Investigation of Modulated Infrared Thermography in Evaluation of Subsurface Defects in Polymer Matrix Composites [Volume 18, Issue 2, 2018, Pages 225-233]
• Composites Nondestructive evaluation of impact area on glass fiber reinforced polymer composite by digital image correlation method: experimental study [Volume 22, Issue 3, 2021, Pages 179-190]
• Composites Non-destructive Inspection of Subsurface Cracks in Carbon-fiber and Glass-fiber Reinforced Polymeric Materials Using Digital Shearography Method [Volume 22, Issue 5, 2021, Pages 311-322]
• Composite sandwich beam On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
• Composite sandwich plate Experimental and numerical investigation of the free vibration of composite sandwich plates with lattice cores [Volume 17, Issue 10, 2017, Pages 1-8]
• Composite sandwich plate Low-velocity Impact Analysis of Rectangular Sandwich Plates with Composite Facesheets Reinforced by SMA Wires and Soft Auxetic Cores [Volume 18, Issue 5, 2018, Pages 112-119]
• Composite sandwich plate Experimental Analysis of Composite Sandwich Plates Buckling with Lozenge Core Using the Vibration Correlation Technique [Volume 20, Issue 5, 2020, Pages 1399-1408]
• Composite sandwich structure Design Optimization of Fairing Sandwich Cylindrical and Conical Structures for Launch Vehicles, Using Hybrid Algorithm [Volume 16, Issue 3, 2016, Pages 331-341]
• Composite Shell Buckling analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method (GDQM) [Volume 17, Issue 11, 2017, Pages 385-396]
• Composite skin Experimental investigation on core shape effect on compressive properties of sandwich structures with composite skins, corrugated composite core and foam [Volume 15, Issue 4, 2015, Pages 51-57]
• Composites structures Thermo-mechanical behavior of polymer composites exposed to fire [Volume 17, Issue 9, 2017, Pages 86-96]
• Composite Structures Taguchi statistical analysis of experimental tests designed to absorb the energy of the composite shells [Volume 15, Issue 7, 2015, Pages 345-352]
• Composite vessels Determination of mechanical response of composite cylinders including circular cutout subjected to uniform external hydrostatic pressure [Volume 15, Issue 9, 2015, Pages 360-370]
• Composite wing The effect of laminate layers and follower force on optimum flutter speed of composite wing [Volume 16, Issue 6, 2016, Pages 226-236]
• Compound Channel Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
• Compound droplet Numerical Study of the Formation of Compound Droplets in a Three-Phase Glass Capillary Microfluidic System [Volume 24, Issue 7, 2023, Pages 433-441]
• Comprehensive model Calculation of effective diffusion coefficient of tracer in tumor tissue with microvasculature using inverse method [Volume 17, Issue 10, 2017, Pages 405-410]
• Compressed natural gas An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
• Compressibility A 3D simulation of Thermal mixing on mesoscopic scale in an electromagnetic microchannel containing ionized gas [Volume 18, Issue 6, 2018, Pages 230-239]
• Compressible Numerical Simulation of droplet breakup by shock wave collision [Volume 12, Issue 1, 2012, Pages 41-49]
• Compressible Modeling and simulation of cuttings transfer during well drilling with foam [Volume 17, Issue 10, 2017, Pages 281-291]
• Compressible A viscous all-speed solver development based on Roe upwind scheme in unstructured database [Volume 18, Issue 9, 2018, Pages 112-121]
• Compressible flow Development of an implicit high order gridless method for inviscid compressible flows [Volume 15, Issue 5, 2015, Pages 127-136]
• Compressible flow Simulation of Bubble Sonoluminescing Phenomena with Lattice Boltzmann Method [Volume 15, Issue 5, 2015, Pages 383-391]
• Compressible flow Flow Control via Co-Flow Jet over Clark-Y Airfoil [Volume 17, Issue 2, 2017, Pages 147-156]
• Compressible flow Simulation of compressible multimaterial flow by 2D hydrodynamic code [Volume 17, Issue 2, 2017, Pages 211-220]
• Compressible flow Effect of initial impact velocity on dynamics and shape of formed splats of hollow droplets in thermal plasma spraying [Volume 17, Issue 2, 2017, Pages 295-305]
• Compressible flow Using of Turkel precondition method for convergence acceleration of compressible flow with low Mach number [Volume 17, Issue 9, 2017, Pages 130-136]
• Compressible flow Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
• Compressible flow Numerical comparison between the impact of a completely molten and a semi-molten hollow droplet on a surface [Volume 17, Issue 8, 2017, Pages 267-278]
• Compressible flow Numerical Study of Effects of Simultaneous Changes of Geometric Parameters on the Performance of Touss Power Plant Ejector and Selecting Optimal Conditions Using Taguchi Method [Volume 19, Issue 3, 2019, Pages 621-629]
• Compressible fluid flow Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
• Compressible viscous and inviscid flow Development of implicit Algorithm for High-order discontinuous Galerkin methods to solve compressible flows using Newton-Krylov methods [Volume 17, Issue 3, 2017, Pages 281-292]
• Compression after Impact Residual Strength prediction of the Carbon/Epoxy plates under Low-Velocity Impact [Volume 22, Issue 5, 2021, Pages 291-302]
• Compression Between Parallel Plate Determination of rheological parameters of the Cross model for semi-solid Al7075 by using parallel plate compression and backward extrusion experiments [Volume 16, Issue 9, 2016, Pages 97-106]
• Compression ignition engine Nonlinear Control of Air path in a Turbocharged Diesel Engine Using Optimization [Volume 17, Issue 6, 2017, Pages 168-178]
• Compression ignition engine Numerical Simulation of the Effect of Fuel Injection Condition on the Diesel and Gasoline Spray Characteristics in a Direct Injection Compression Ignition Engine [Volume 19, Issue 4, 2019, Pages 901-910]
• Compression properties Effect of calcium and boron addition on the microstructure and compression properties of AZ91 cast magnesium alloy [Volume 22, Issue 8, 2021, Pages 497-508]
• Compression Refrigeration Parameteric Study and Optimization of the Combined Power and Ejector Compression Refrigeration Cogeneration Cycle with Carbon Dioxide as the Working Fluid [Volume 24, Issue 11, 2023, Pages 95-101]
• Compression refrigeration cycle Modeling and simulation of refrigeration cycle and its performance evaluation under different environment [Volume 12, Issue 1, 2012, Pages 85-97]
• Compression stiffened panel Preliminary design of compression stiffened panel using structural index concept [Volume 14, Issue 13, 2014, Pages 67-76]
• Compression stiffened panel Optimum design of compression stiffened panel under buckling constraint using Gaussian surrogate model [Volume 16, Issue 6, 2016, Pages 205-216]
• Compression test Fabrication of bone scaffolds by additive manufacturing of fused deposition modeling (FDM) and investigation of their mechanical properties [Volume 23, Issue 1, 2022, Pages 1-9]
• Compression Waves Numerical analysis of flow and heat generation mechanism in a Hartmann-Sprenger resonance tube [Volume 15, Issue 7, 2015, Pages 227-238]
• Compressive Behavior The production of aluminum foam with a new method and the study of its compressive behavior [Volume 18, Issue 9, 2018, Pages 180-188]
• Compressive Behavior The Effect of the Number of Immersion Times in Slurry on the Microstructure and Mechanical Properties of Aluminum Foam Produced by Slurry Casting Method [Volume 21, Issue 1, 2021, Pages 1-9]
• Compressive load Experimental investigation on core shape effect on compressive properties of sandwich structures with composite skins, corrugated composite core and foam [Volume 15, Issue 4, 2015, Pages 51-57]
• Compressive Residual Stress Laser Shock Peening of Al 6061- T6 Alloy, a theoretical and experimental study [Volume 15, Issue 7, 2015, Pages 73-79]
• Compressive spring Design and dynamic modeling of a module included a compressive spring and actuated by shape memory alloy wire [Volume 14, Issue 14, 2014, Pages 17-26]
• Compressive Strength and Modulus Experimental Investigation of the Effect of Annealing and Printing Parameters on the Compressive Strength and Modulus of 3D Printed Porous Structures with Interconnected Pores Made of Polylactic Acid by Fused Deposition Modeling Process. [Volume 24, Issue 4, 2023, Pages 251-258]
• Compressor Simulation Study on the Thermal Performance of a direct-expansion solar-assisted heat pump for water heating in Kermanshah climate [Volume 15, Issue 12, 2015, Pages 232-242]
• Compressor blade Simulation of crack growth rate in T56 jet engine compressor blade using Raju-newman method [Volume 17, Issue 11, 2017, Pages 21-30]
• Compressor Blade of Gas Turbine Effect of compressive residual stress on wear resistance of IGT25+ gas turbine compressor blades made of 1.4923 steel [Volume 22, Issue 3, 2021, Pages 167-177]
• Compressor Impeller Effect of Dynamic Parameters and Fluid Impurities on Abrasion of Centrifugal Compressor Impeller of the Gas Transmission Center using Experimental and Analytical Methods [Volume 19, Issue 11, 2019, Pages 2645-2651]
• Computational Dynamics Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
• Computational fluid dynamic Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
• Computational fluid dynamic Simulation of the blast wall geometry effect on the blast wave attenuation [Volume 17, Issue 3, 2017, Pages 63-71]
• Computational fluid dynamic Numerical simulation of inlet vortex near the inlet air duct of an aircraft engine in headwind condition [Volume 17, Issue 6, 2017, Pages 90-100]
• Computational fluid dynamic Parametric Analysis of a Nanofluid Based Photovoltaic Thermal System, Using Computational Fluid Dynamic [Volume 17, Issue 9, 2017, Pages 195-204]
• Computational fluid dynamic Design and Analysis of Axisymmetric Supersonic Inlet at Mach 3 [Volume 19, Issue 10, 2019, Pages 2543-2550]
• Computational Fluid Dynamic (CFD) The unsteady rotating force prediction of far-field acoustic pressure for marine propeller by inverse method [Volume 15, Issue 7, 2015, Pages 353-362]
• Computational Fluid Dynamic (CFD) Static Aeroelastic Simulation of a Wing in Transonic Flow [Volume 16, Issue 10, 2016, Pages 313-322]
• Computational Fluid Dynamics Comparing between 1D & 3D Flow Analysis in the On-Engine Small Turbocharger Experimentally and Numerically [Volume 11, Issue 4, 2011, Pages 75-88]
• Computational Fluid Dynamics Analysis of thermal comfort in space equipped with stratum ventilation and radiant cooling ceiling [Volume 13, Issue 11, 2013, Pages 41-54]
• Computational Fluid Dynamics Relationship between Spinal fluid pressure and Cerebrospinal fluid pressure as an index for assessment of hydrocephalus non-communicating [Volume 14, Issue 13, 2014, Pages 308-314]
• Computational Fluid Dynamics Study on Frictional Heat Behavior and Material Flow during Friction Stir Welding Of AA1100 Aluminum Alloy [Volume 14, Issue 14, 2014, Pages 251-261]
• Computational Fluid Dynamics Numerical simulation of turbulent airflow in a human upper respiratory system [Volume 14, Issue 15, 2014, Pages 267-272]
• Computational Fluid Dynamics Simulation of a turbocharged SI engine to investigate autoignition, knock onset and flame propagation by using Kiva code [Volume 15, Issue 3, 2015, Pages 53-62]
• Computational Fluid Dynamics An Experimental, Analytical and Numerical Investigation of Static Performance of an Electromotor Driven Propeller with Application in UAVs [Volume 15, Issue 6, 2015, Pages 145-156]
• Computational Fluid Dynamics Optimization of Electrochemical Lead-Acid Battery Using Computational Fluid Dynamics [Volume 15, Issue 9, 2015, Pages 280-288]
• Computational Fluid Dynamics Simulation and Analysis of Bushehr Nuclear Power Plant Steam Generator [Volume 15, Issue 12, 2015, Pages 303-310]
• Computational Fluid Dynamics Extraction of Rate Coefficients of Multi-step Global Reactions for Combustion of Hydrocarbon Fuels Regarding Operating Conditions for Pollutant Prediction [Volume 16, Issue 1, 2016, Pages 163-172]
• Computational Fluid Dynamics A study on the thermophysical properties of water/ethylene glycol based nanofluids using non-equilibrium molecular dynamics and computational fluid dynamics methods [Volume 16, Issue 7, 2016, Pages 153-162]
• Computational Fluid Dynamics Numerical design and analysis of supersonic exhaust diffuser in altitude test simulator [Volume 16, Issue 8, 2016, Pages 159-168]
• Computational Fluid Dynamics Improving the performance of the physical influence scheme (PIS) for cell-centred finite volume method [Volume 16, Issue 12, 2016, Pages 571-582]
• Computational Fluid Dynamics Numerical Modeling of High-Speed Tunneled Hull Turning Circle Maneuver for Investigating the Speed and Rudder Angle Effects on Maneuver Parameters [Volume 17, Issue 2, 2017, Pages 85-92]
• Computational Fluid Dynamics Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
• Computational Fluid Dynamics Numerical Analyses of the Vortical Flow over the Cranked Kite Wing in Ground Proximity [Volume 17, Issue 4, 2017, Pages 41-51]
• Computational Fluid Dynamics Design of Spike Nozzle and Comparison of Turbulence Models in Numerical Simulation of its Flow-field in Design and Off-design Conditions [Volume 17, Issue 6, 2017, Pages 190-200]
• Computational Fluid Dynamics Numerical investigation of back flow arrester effect on altitude test simulator starting performance [Volume 17, Issue 7, 2017, Pages 185-196]
• Computational Fluid Dynamics Three-Dimensional Aerothermodynamic Optimization of the Stator Blade of an Axial-Flow Gas Turbine in an Open-Source Platform [Volume 17, Issue 10, 2017, Pages 176-184]
• Computational Fluid Dynamics Investigation Effect of Changes Geometry of Impeller on Turbine Mode Performance of the Centrifugal Pump at the Governing Condition of the Urban Water Distribution Network [Volume 18, Issue 1, 2018, Pages 11-19]
• Computational Fluid Dynamics Approximation of Oil Production Well Index in Hydrocarbon Reservoirs Using Computational Fluid Dynamics [Volume 18, Issue 1, 2018, Pages 177-187]
• Computational Fluid Dynamics Numerical Simulation of the Hydrodynamics of Two Phase Flow in Distillation Column Sieve Trays [Volume 18, Issue 2, 2018, Pages 401-412]
• Computational Fluid Dynamics Investigating the aerodynamic interaction of wind turbines based on actuator disk model [Volume 18, Issue 6, 2018, Pages 105-112]
• Computational Fluid Dynamics Numerical analysis of heat transfer in porous fin with non-homogeneous porosity and considering thermal radiation effect [Volume 18, Issue 9, 2018, Pages 151-162]
• Computational Fluid Dynamics Numerical Investigation of Aeroelastic Behavior of Tall Buildings Considering Wind-Structure Interaction [Volume 19, Issue 3, 2019, Pages 719-730]
• Computational Fluid Dynamics Numerical Investigation of Ambient Temperature and Actual Impactor Plates Effects on Its Efficiency [Volume 19, Issue 6, 2019, Pages 1327-1335]
• Computational Fluid Dynamics Hydrodynamic Simulation of Two Phase Flow in an Industrial Electrowinning Cell [Volume 20, Issue 1, 2020, Pages 215-225]
• Computational Fluid Dynamics Experimental and Numerical Investigation of Using Coanda Effect for Producing Underwater Propulsion [Volume 20, Issue 3, 2020, Pages 777-786]
• Computational Fluid Dynamics The effect of place the porous medium in gas pressure regulators on performance and noise reduction [Volume 21, Issue 7, 2021, Pages 429-439]
• Computational Fluid Dynamics Evaluation of the efficiency of hybrid dry cooling tower by placing the Air Cooling Condenser inside the Heller cooling tower [Volume 21, Issue 7, 2021, Pages 441-452]
• Computational Fluid Dynamics Computational Fluid Dynamics Simulation of Blast Wave Using OpenFOAM: the Effect of Solver and Equation of State on the Results Accuracy [Volume 22, Issue 12, 2021, Pages 747-757]
• Computational Fluid Dynamics An experimental and numerical investigation of vortices on the effect of vortices on the performance of a wingsuit [Volume 23, Issue 2, 2022, Pages 93-105]
• Computational Fluid Dynamics Numerical Investigation of the Effect of Adding Stay Blades on Improving the Performance of Centrifugal Pump as Turbine [Volume 25, Issue 2, 2024, Pages 97-105]
• Computational Fluid Dynamics‎ Investigating Stress Urinary Incontinence in Women Using Computational Methods and Clinical Data [Volume 17, Issue 5, 2017, Pages 419-429]
• Computational Fluids Dynamic A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
• Computational Homogenization Multiscale Modeling Of Cyclic Plastic Deformation of Magnesium Alloy AZ31 Using Crystal Plasticity Finite Element Method and Computational Homogenization [Volume 20, Issue 3, 2020, Pages 761-775]
• Computational Intelligence An Augmented Surrogate-Assisted Reliability-based Design Approach and Application to Complex Systems Design [Volume 18, Issue 3, 2018, Pages 247-258]
• Computational Modeling Modeling and Simulation of Myocardial Hyperelastic and Viscoelastic Properties with Incorporation of Active Stress [Volume 23, Issue 9, 2022, Pages 553-565]
• Computed torque control Fault detection of the 3-PSP parallel robot using the principal components analysis method [Volume 15, Issue 3, 2015, Pages 419-430]
• Computed torque method control Path planning of cable driven parallel robots in the presence of dynamic obstacles via potential field using computed torque control method [Volume 16, Issue 4, 2016, Pages 109-118]
• Computer Aided Design An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
• Computer-Aided Process Planning Investigation of Geometrical Rules and Introducing a Method Based on Permutation for Sequencing of Machining Features for Prismatic Parts [Volume 15, Issue 10, 2015, Pages 311-319]
• Computer-Aided Process Planning Automatic Machining Features Extraction from Two-Dimensional Image of Mechanical Parts with the Help of Artificial Intelligence [Volume 22, Issue 10, 2021, Pages 173-179]
• Computer-Aided Process Planning Machining features recognition from image of mechanical parts with the help of deep learning technic [Volume 23, Issue 6, 2022, Pages 337-345]
• Computer-assisted Design and Construction of a Computer-Assisted Device Applicable for Accurate Pedicle Screw Placement in Spinal Fusion Surgery [Volume 23, Issue 11, 2022, Pages 607-614]
• Computer Control Polishing Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
• Computer Vision Learning of the 5-finger robot hand using deep learning for stable grasping [Volume 23, Issue 5, 2022, Pages 307-316]
• COMSOL Experimental and numerical analysis of the effect of cold on sound transmission from a steel cylindrical shell [(Articles in Press)]
• Comsol Multiphysics Non-linear vibration of curved microbeam under electrostatic actuation by using reduced order model and finite element simulation [Volume 17, Issue 12, 2017, Pages 514-522]
• Concave and convex die patterns Experimental study of the die patterns in rubber pad forming process for producing of metallic bipolar plates [Volume 15, Issue 9, 2015, Pages 179-186]
• Concave Target Plate Experimental Study and Numerical Simulation of the Circular Hydraulic Jump on the Concave Target Plate [Volume 20, Issue 2, 2020, Pages 321-328]
• Concentrated loading Analytical solution of stress and displacement in axisymmetric inhomogeneous half space under normal concentrated surface loading [Volume 15, Issue 6, 2015, Pages 51-57]
• Concentrated loading Experimental Investigation of foam filled Sandwich Panels in Concentrated and Distributed Compressive loading [Volume 16, Issue 12, 2016, Pages 648-656]
• Concentrated Mass Electric Response of Piezoelectric Nonlinear Beam with the Harmonic Base Excitation and Change Concentrated Mass [Volume 19, Issue 2, 2019, Pages 467-474]
• Concentrated Solar Power A Parametric Study on Optical Performance of a Multi-Tubular Solar Reactor by Monte-Carlo ray Tracing Method [Volume 19, Issue 3, 2019, Pages 643-653]
• Concentrating Photovoltaic Thermal Techno-Economic Comparison of Monocrystalline and Concentrating Photovoltaic Thermal Power Plant in Kerman province [Volume 20, Issue 6, 2020, Pages 1511-1523]
• Concentration Experimental investigation of nanofluid concentration and material type effect on pool boiling [Volume 15, Issue 10, 2015, Pages 165-172]
• Concentration Simulation of Particles Dissolution Process in Shear Field using Combined Concentration Lattice Boltzmann–Smoothed Profile Methods [Volume 20, Issue 3, 2020, Pages 575-585]
• Concentration Impedance Fuel concentration impedance simulation of a planar Solid Oxide Fuel Cell [Volume 13, Issue 15, 2013, Pages 38-49]
• Concentric Left Ventricular Hypertrophy Numerical Modeling of Concentric Left Ventricular Hypertrophy of the Human Heart [Volume 19, Issue 10, 2019, Pages 2491-2498]
• Concept Model A conceptual model for the dynamical analysis of vehicle wheelhouse in the early stage of design [Volume 15, Issue 12, 2015, Pages 279-286]
• Conceptual Design Conceptual design algorithm with statistical processing approach based on Sensitivity analysis of velocity relative to effective external forces [Volume 16, Issue 7, 2016, Pages 189-199]
• Conceptual Design Conceptual Design of ‍Conventional Gas Turbine Combustors Aiming at Pollutants Emission Prediction [Volume 16, Issue 10, 2016, Pages 429-440]
• Conceptual Design Optimal Manned Space Launch System Conceptual Design with Modular Design and Sensitivity Analysis Approach [Volume 18, Issue 9, 2018, Pages 8-18]
• Concrete dam 2D Seismic Cracking Identification of Weighted Concrete Dams Based on Extended Finite Element Method and Wavelet Transform [Volume 16, Issue 10, 2016, Pages 207-217]
• Concrete Scan Studying Oblique Penetration Trajectory of Rigid Projectiles in Semi-Infinite Concrete Targets by Analytical and Experimental Methods [Volume 25, Issue 7, 2024, Pages 417-427]
• Condensation Shock Modeling of 2D Two-Phase Flow in Cascade Blades of Steam Turbine Using Jameson’s Finite Volume Method with CUSP Technique [Volume 15, Issue 4, 2015, Pages 141-150]
• Condensation Shock Numerical analysis of shock and various parameters effects on two-phase flow in convergent-divergent nozzle using equilibrium and non-equilibrium methods [Volume 15, Issue 7, 2015, Pages 40-52]
• Condensation Shock A comparison between polydispersed and monodispersed radius modeling techniques of droplets in condensing steam flow in a supersonic nozzle by Eulerian-Lagrangian method [Volume 17, Issue 10, 2017, Pages 47-57]
• Condensing Flow of Steam A comparison between polydispersed and monodispersed radius modeling techniques of droplets in condensing steam flow in a supersonic nozzle by Eulerian-Lagrangian method [Volume 17, Issue 10, 2017, Pages 47-57]
• Condensing steam flow Effect of the droplet surface tension correction on nucleation condensing water vapor flow [Volume 16, Issue 2, 2016, Pages 264-274]
• Condition Monitoring Tool wear condition monitoring using time- frequency marginal integral of motor current signal [Volume 14, Issue 16, 2014, Pages 181-189]
• Condition Monitoring Condition Monitoring Based on Vibration Analysis for Defect Diagnosis of Rolling Element Bearing (Case Study: Mill Fan Electro Motor) [Volume 20, Issue 1, 2020, Pages 67-76]
• Condition Number Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
• Conduction Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
• Conduction heat transfer Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
• Conductive Heat Transfer An Analytical Solution of Steady State Conductive Heat Transfer in Cylindrical Composite Laminates [Volume 9, Issue 1, 2009, Pages 135-152]
• Cone-Jet mode Numerical Study on Formation of Liquid Flow Emerging from a Capillary Emitter due to Electric Potential Effects [Volume 16, Issue 5, 2016, Pages 367-378]
• Configuration Configuration design and layout optimization in GEO satellite [Volume 15, Issue 1, 2015, Pages 339-351]
• Configuration A New Approaches for Satellite Constellation Design to Regional Coverage Using GDOP [Volume 17, Issue 5, 2017, Pages 193-200]
• Configuration Utilizing Acoustic Emission for Studying Scaling and Layup Configuration Effect on Behavior of Glass/Epoxy Composite Materials Under Low-Velocity Impact [Volume 21, Issue 11, 2021, Pages 719-728]
• Confined Compression Test The Anisotropic Effect of Intervertebral Disc Tissue in Confined Compression Test [Volume 20, Issue 5, 2020, Pages 1115-1126]
• Confinement Parameter Investigating effect of applying FCT scheme in vorticity confinement method on reducing the influence of confinement parameter on the final solution [Volume 18, Issue 3, 2018, Pages 65-74]
• Conformal Mapping Stress analysis of symmetric composite laminates with quasi-rectangular hole subjected to in-plane loading [Volume 14, Issue 15, 2014, Pages 395-404]
• Conformal Mapping Thermal stress analysis of metallic plate with quasi-rectangular hole [Volume 15, Issue 3, 2015, Pages 19-26]
• Conformal Mapping Use of Conformal Mapping in the Field of Flying Vehicle Route Planning [Volume 20, Issue 5, 2020, Pages 1187-1197]
• Conformational changes Evaluating elastic network models in prediction of conformational changes of proteins [Volume 16, Issue 1, 2016, Pages 81-88]
• Conical Forming Conical Forming of Sheet Metals by Gas Mixture Explosion Metod [Volume 9, Issue 1, 2009, Pages 15-28]
• Conical H-S tube Effect of physical parameters on internal flow and thermal performance of a conical Hartmann-Sprenger tube - Case study [Volume 16, Issue 6, 2016, Pages 189-198]
• Conical lattice structure Analysis of linear vibrational behavior of anisogrid lattice composite conical shells formed by helical ribs [Volume 17, Issue 3, 2017, Pages 251-262]
• Conical part Experimental and Numerical Study on Effects of Process Parameters on Working Zone in Hydro-mechanical Deep Drawing of Two-layer Conical Parts [Volume 17, Issue 3, 2017, Pages 72-78]
• Conical part Investigation of Wrinkling in Hydrodynamic Deep Drawing assisted by Radial Pressure with Inward Flowing Liquid Based on a Geometric Method [Volume 17, Issue 5, 2017, Pages 276-286]
• Conical shell Free vibration analysis of nanotube-reinforced composite truncated conical shell resting on elastic foundation [Volume 14, Issue 12, 2014, Pages 122-132]
• Conical shell Thermal buckling of functionally graded carbon nanotube-reinforced composite conical shells [Volume 15, Issue 10, 2015, Pages 137-146]
• Conical shells Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
• Conical shells Experimental and Numerical Study of Conical Thin Shells Collapse under Dynamic Axial Loadings. [Volume 15, Issue 7, 2015, Pages 392-402]
• Conical shells Nonlinear vibration analysis of conical shells using a numerical strategy [Volume 17, Issue 1, 2017, Pages 210-220]
• Conical shell vibration Sound radiation analysis excited by incident sound wave to truncated conical shell [Volume 17, Issue 3, 2017, Pages 159-166]
• Conjugate Convection Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
• Conjugate gradient Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
• Conjugate gradient Identification of thermal properties of polymer insulations using inverse analysis; zirconia ceramic foam [Volume 18, Issue 1, 2018, Pages 327-334]
• Conjugate Gradient Method Investigation of Iterative Solvers Parallelization for Systems of Linear Equations Resulting from the Poisson Equation [Volume 23, Issue 11, 2022, Pages 627-639]
• Conjugate heat transfer Numerical study of conjugate heat transfer phenomena in a reacting flow [Volume 16, Issue 1, 2016, Pages 353-360]
• Connected camera Dynamic Analysis of a Quadrotor in Variable Operating Conditions [Volume 18, Issue 3, 2018, Pages 135-145]
• Connective Layer A New Approach for Finite Element Model Updating of Bolted Joints and Comparison with Interface Layer Method [Volume 16, Issue 3, 2016, Pages 35-42]
• Conomic Optimization Multi-objective Optimization of Multi-tube Heat Exchanger Network Considering the Effect of Different Nanoparticles [Volume 19, Issue 6, 2019, Pages 1507-1518]
• Consecutive inclinations Experimental Study of Gas-Liquid Two-Phase Flow in the Consecutive Inclinations of a Large Bend [Volume 14, Issue 12, 2014, Pages 52-60]
• Consecutive inclinations Experimental study of length, velocity and frequency of taylor bubbles in gas-liquid two-phase flow in a large bend [Volume 14, Issue 12, 2014, Pages 133-144]
• Consensus Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
• Consensus Distributed Adaptive Robust Controller Design for Consensus in Multi-Agent System Including Robot Arms with Actuator Saturation Constraint [Volume 19, Issue 7, 2019, Pages 1759-1766]
• Conservation laws Numerical simulation of bedload sediment transport with ability to model dry interfaces using an augmented Riemann solver [Volume 18, Issue 5, 2018, Pages 241-249]
• Conservative force Study the effect of conservative force size and type on particles radios in Dissipative Particle Dynamics method [Volume 17, Issue 10, 2017, Pages 249-258]
• Consistency An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
• Consistent couple stress theory Extraction of dispersion curves for lamb waves in an aluminium nitride (AlN) micro plate using consistent couple stress theory [Volume 16, Issue 1, 2016, Pages 248-256]
• Consistent velocity approximation Numerical Solution of coupled Flow and Mass Transport equations in porous medium Using Discontinuous Galerkin Method [Volume 16, Issue 11, 2016, Pages 397-408]
• Constant-Curvature Element Kinematic Modelling of Origami-Inspired Continuum Robotic Arm by Constant-Curvature Elements [Volume 19, Issue 11, 2019, Pages 2729-2735]
• Constant-Curvature Elements Dynamics Modeling of Continuum Manipulators by Constant-Curvature Elements without Numerical Singularities [Volume 14, Issue 15, 2014, Pages 231-240]
• Constant Heat Flux Numerical simulation of free convection around a stationary cylinder with constant heat flux and different diagonal locations using IB-LBM [Volume 17, Issue 4, 2017, Pages 419-430]
• Constant wall temperature Joule heating effects on electroosmotic flow through a microchannel with trapezoidal cross-section [Volume 12, Issue 6, 2012, Pages 136-146]
• Constitutive equations Investigation of Dynamic behavior of Unidirectional Plies Using One Parameter Plastic Model [Volume 15, Issue 6, 2015, Pages 1-6]
• Constitutive equations The Anisotropic Effect of Intervertebral Disc Tissue in Confined Compression Test [Volume 20, Issue 5, 2020, Pages 1115-1126]
• Constitutive equations Evaluation of the thermomechanical behavior of the new generation nickel-cobalt Co-Ni-Al-Cr-W-Ti-Ta-Nb-Mo-C-B (%wt) superalloy Using constitutive equations and deformation processing maps [Volume 23, Issue 3, 2022, Pages 191-197]
• Constitutive law Modeling of nonlinear elastic modulus variation during cyclic loading [Volume 13, Issue 7, 2013, Pages 10-17]
• Constitutive Model Constant and Variable Assuming Strain Rate Methods for Identification of Constitutive Model of Metals Using Hopkinson Pressure Bar Test [Volume 12, Issue 2, 2012, Pages 1-10]
• Constitutive Model A dynamic-micromechanical constitutive model to predict the strain rate dependent shear behavior of neat and reinforcerd polymers with carbon nanofibers [Volume 15, Issue 7, 2015, Pages 13-21]
• Constitutive Model A constitutive model for stainless steel 304 sheet considering size effect in micro-scale [Volume 22, Issue 8, 2021, Pages 519-528]
• Constitutive Parameters Obtaining the creep constitutive parameters for the layers of butt-welded 1.25Cr0.5Mo pipe [Volume 15, Issue 9, 2015, Pages 407-416]
• Constrained Groove Pressing Experimental and Numerical Study of Severe Plastic Deformation in the Constrained Groove Pressing Process on the Pure Copper Sheets [Volume 19, Issue 2, 2019, Pages 269-280]
• Constrained Groove Pressing Investigating the Behavior of Aluminum 7075 under the Process of CGP as the Fin of Space Structures [Volume 19, Issue 5, 2019, Pages 1187-1197]
• Constrained ironing Experimental and numerical investigation of a new constrained ironing process with capability of extra high thickness reduction [Volume 16, Issue 2, 2016, Pages 140-146]
• Constrained Layer Damping Effect of Temperature Variation and Mass Distribution on the Optimal Design of the Constrained-Layer-Damping for a Beam [Volume 20, Issue 3, 2020, Pages 539-551]
• Construct Constructal Theory Application for Cogeneration Heat and Power Total Site Retrofit [Volume 15, Issue 8, 2015, Pages 143-152]
• Constructal Theory Constructal Theory Application for Cogeneration Heat and Power Total Site Retrofit [Volume 15, Issue 8, 2015, Pages 143-152]
• Constructal Theory Optimal Architecture Design of Circular Finned Tube using Constructal Theory [Volume 16, Issue 1, 2016, Pages 317-323]
• Constructal Theory Developing a design method for optimal geometric and operating parameters of triple pressure heat recovery steam generator using the constructal theory [Volume 17, Issue 5, 2017, Pages 335-345]
• Constructural theory The Effect of Constructural Important parameters on Optimization of Rate of Heat Transfer in Heat Exchanger Developed Layers. [Volume 16, Issue 1, 2016, Pages 173-180]
• Contact Acoustic Nonlinearity Contact Acoustic Nonlinearity Identification via Online Vibro-Acoustic Modulation Technique [Volume 20, Issue 7, 2020, Pages 1719-1730]
• Contact angle Contact Angle Comparison of Droplet Impact on Solid Surface Using VOF [Volume 15, Issue 3, 2015, Pages 84-94]
• Contact angle Numerical Simulation of Bubble Impact and Movement alongside to the Inclined plate with VOF Method [Volume 15, Issue 10, 2015, Pages 329-340]
• Contact angle Molecular dynamics simulation of the effects of the carbon nanotube length on the nanofluidic energy absorption system [Volume 16, Issue 9, 2016, Pages 359-365]
• Contact boundary condition estimation Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
• Contact Condition Behavior modeling of pneumatic soft bending actuators in free and contact conditions [Volume 23, Issue 4, 2022, Pages 235-247]
• Contact Force Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
• Contact Force Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
• Contact Force Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
• Contact Force Experimental investigation of quasi-static perforation on laminated glass epoxy composites by indenters with different geometries [Volume 15, Issue 1, 2015, Pages 185-193]
• Contact Force Analysis of laminated composite sandwich plates with magnetorheological fluid core under low velocity impact [Volume 16, Issue 12, 2016, Pages 114-124]
• Contact Interaction Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
• Contact Interface Slippage Dynamic Modeling in Object Grasping and Manipulation with Soft Fingers [Volume 15, Issue 8, 2015, Pages 332-340]
• Contact Modeling Slippage Dynamic Modeling in Object Grasping and Manipulation with Soft Fingers [Volume 15, Issue 8, 2015, Pages 332-340]
• Contact pressure Investigation of Variation of Friction Coefficient and Frictional Stress Using a New Designed Device [Volume 15, Issue 12, 2015, Pages 287-294]
• Contact pressure Effect of Contact Geometry on the Slip Amplitude and Contact Pressure in Fretting Fatigue of a Turbine Blade Root [Volume 19, Issue 10, 2019, Pages 2409-2418]
• Contact UNDEX Numerical and Experimental Study of Damage in Multi-Compartment Armor due to UNDEX [Volume 24, Issue 8, 2023, Pages 499-509]
• Continues laser Experimental study on laser cladding process parameters of martensitic stainless steel powder on Plain Carbon Steel: Cladding Geometry, dilution Ratio and Sample Hardness [Volume 22, Issue 4, 2021, Pages 243-252]
• Continues maneuver Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
• Continuous Compliance Optimization (CCO) Evaluation of Selected Topology Optimization Methods for Manufacturing Industrial Parts Using Additive Manufacturing Method: A Case Study [Volume 22, Issue 10, 2021, Pages 227-234]
• Continuous cooling torsion test The use of hot torsion testing for determination of critical temperatures of API X65 steel [Volume 14, Issue 13, 2014, Pages 291-296]
• Continuous Cooling Transformation Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
• Continuous Fiber-Reinforced Thermoplastic Composites Investigation of Interlayer Fracture of Printed Composite (Glass/ABS) Considering a Statistical Micromechanical Damage Model [Volume 25, Issue 2, 2024, Pages 107-115]
• Continuous fibers Investigation of the Residual Strains in the Continuous Fiber Reinforced Specimens of the Fused Deposition Modeling Process Using Digital Image Correlation Method [Volume 22, Issue 7, 2021, Pages 441-449]
• Continuous gravity current The Eulerian-Lagrangian and Eulerian-Eulerian methods combination for numerical modeling of the particle laden density current [Volume 18, Issue 1, 2018, Pages 441-451]
• Continuous liquid interface production Experimental research on the impact of oxygen control zone thickness on continuous layerless printing of porous polymer parts [Volume 23, Issue 3, 2022, Pages 151-159]
• Continuous Micro-slip Model Analytical investigation of micro-slip energy dissipation in joints [Volume 11, Issue 4, 2011, Pages 53-63]
• Continuous printing Experimental research on the impact of oxygen control zone thickness on continuous layerless printing of porous polymer parts [Volume 23, Issue 3, 2022, Pages 151-159]
• Continuous Speed and Torque Investigation of Continuous Changes in Output Speed and Torque in a Multi-Pass Radial Turbine [Volume 25, Issue 6, 2024, Pages 333-343]
• Continuous time state space Dynamical parameters identification of shear structure using block pulse functions and ARX model [Volume 17, Issue 9, 2017, Pages 301-308]
• Continuous-Time State-Space Model Unsteady Aerodynamics Using Boundary Element Method and Continuous-Time State-Space Modeling [Volume 11, Issue 1, 2011, Pages 89-101]
• Continuous wavelet transform Damage Detection Based on System Identification of Concrete Arch Dam using XFEM Based Cohesive Crack Segments and Wavelet Transform [Volume 16, Issue 12, 2016, Pages 373-383]
• Continuum damage mechanics Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
• Continuum damage mechanics Damage growth prediction of unidirectional layered composites under cyclic loading using an energy based model [Volume 15, Issue 7, 2015, Pages 173-180]
• Continuum damage mechanics Modeling of the effects of progressive anisotropic damage on the elastoplastic behavior of metal matrix composites [Volume 16, Issue 8, 2016, Pages 65-74]
• Continuum damage mechanics Experimental, Analytical, and Numerical Investigation of Damage Mechanics of the Cross-ply Composite Laminate with Matrix Crack [Volume 22, Issue 12, 2021, Pages 759-769]
• Continuum mechanic Study the effect of environment temperature on mechanical and fracture behavior of carbon nanotubes [Volume 17, Issue 3, 2017, Pages 87-92]
• Continuum mechanics Two-layer artery wall modeling with hyperelastic material assumption [Volume 18, Issue 3, 2018, Pages 75-85]
• Continuum mechanics Modeling athlete’s heart syndrome caused by hypertension in strength training [Volume 18, Issue 3, 2018, Pages 389-394]
• Continuum Module Design, manufacturing and control of a continuum robotic module actuated by shape memory alloys [Volume 16, Issue 2, 2016, Pages 253-263]
• Continuum robot Design and analysis of a novel cable-driven backbone for continuum robots [Volume 15, Issue 3, 2015, Pages 322-332]
• Continuum robot Adaptive Control Design for a Tendon-based continuum robot [Volume 15, Issue 9, 2015, Pages 235-246]
• Continuum robot Kinematic Modelling of Origami-Inspired Continuum Robotic Arm by Constant-Curvature Elements [Volume 19, Issue 11, 2019, Pages 2729-2735]
• Continuum Robots Motion analysis of continuum robots structures with cable actuation [Volume 14, Issue 14, 2014, Pages 39-49]
• Continuum Robots Dynamics Modeling of Continuum Manipulators by Constant-Curvature Elements without Numerical Singularities [Volume 14, Issue 15, 2014, Pages 231-240]
• Contouring Control Jerk limited machining using C2 Pythagorean-hodograph (PH) quintic spline curves [Volume 11, Issue 3, 2011, Pages 1-12]
• Contour method Uncertainty analysis of contour method in the hot extruded Aluminum specimens [Volume 17, Issue 5, 2017, Pages 439-445]
• Contraction Kinematic Analysis of a Multi-Bar Drum Mechanism is Assembled Using Adams Software [Volume 23, Issue 10, 2022, Pages 29-32]
• Contraction channel Experimental Investigation of Isotropic Flow Generated by Grid in Subsonic Wind Tunnel and Measurement of Characteristics of Turbulent Flow [Volume 22, Issue 3, 2021, Pages 191-200]
• Contrast Enhancement Evaluating the Debonding Defect Detectability in Thermal Barrier Coatings (TBC) by Nondestructive Active Thermography Technique [Volume 24, Issue 12, 2023, Pages 717-726]
• Control Kinematic Attitude Control of Three Pairwise Connected in-Plane Masses by Varing the Lengths of the Links [Volume 13, Issue 7, 2013, Pages 127-141]
• Control Performance investigation of control and guidance system for a spinning flight vehicle with dithering canard [Volume 14, Issue 7, 2014, Pages 169-175]
• Control Asymptotically stable walking control of a 3D biped robot via potential energy shaping approach [Volume 15, Issue 9, 2015, Pages 261-270]
• Control Practical Performance Comparison of Pole placement and Sliding Mode Controller for Position Control of Cable-driven Parallel Robots Using Visual Servoing [Volume 15, Issue 12, 2015, Pages 63-74]
• Control Design of a Trainable Controller Inspired from Neural System to Generate Complex Behaviors in Humanoid Robots [Volume 16, Issue 2, 2016, Pages 59-68]
• Control Design, manufacturing and control of a continuum robotic module actuated by shape memory alloys [Volume 16, Issue 2, 2016, Pages 253-263]
• Control Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
• Control Modeling, optimal path planning and tracking control of a cable driven redundant parallel robot [Volume 17, Issue 4, 2017, Pages 67-77]
• Control Parametric Model of Human Constrained Gait with Implementation on Exoped Exoskeleton [Volume 18, Issue 6, 2018, Pages 12-18]
• Control Design, Construction and Control of a Motion Generating Mechanism for an Interactive Cycling Simulator [Volume 21, Issue 12, 2021, Pages 859-872]
• Control allocation Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
• Control Forced Vibrations Control Forced Vibrations Of Laminated Composite Rectangular Plate Resting On Linear Line Support [Volume 15, Issue 9, 2015, Pages 95-104]
• Controllable workspace.‎ Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
• Controlled Diffusion Airfoil Optimization of CDA airfoil Geometry of a transonic Axial Compressor, using Genetic Algorithm And CFD [Volume 25, Issue 1, 2024, Pages 1-9]
• Controlled transition scenario Direct Numerical Simulation of Controlled Transition Scenarios on a Flat plate [Volume 15, Issue 3, 2015, Pages 353-364]
• Controller Implementation of Attitude Control for an Octorotor Flying Robot in Autonomous Trajectory Tracking [Volume 16, Issue 6, 2016, Pages 387-395]
• Controller The SDRE controller and estimator design for flexible joint manipulators in presence of noise and disturbance [Volume 16, Issue 8, 2016, Pages 1-12]
• Controller Designing l_1 norm Based Sliding Mode Controller For Implementing in Hybrid Model of Gas Turbine [Volume 19, Issue 10, 2019, Pages 2339-2350]
• Controller Designing Mechanical Improvement, Simulation, and Implementation of a Visual Servoing Position Controller of a 4-DOF Delta Parallel Robot [Volume 19, Issue 1, 2019, Pages 115-123]
• Controllers Comparison Adaptive-Fuzzy Controller Design Based on the EULERINT Criterion for Satellit [Volume 19, Issue 12, 2019, Pages 2895-2905]
• Controlling environmental pollutants Numerical Analysis of Water Injection Effect on NOx Reduction of MGT-40 Gas Turbine [Volume 19, Issue 2, 2019, Pages 397-405]
• Control-Oriented Modeling Modeling and Simulation of Combustion in SI Engines via Neural Networks and Investigation of Calibration and Data Acquisition in the GT-Power [Volume 14, Issue 13, 2014, Pages 233-244]
• Control-Oriented Modeling An Improvement in Control-oriented Modeling of SI Engines using Grey-box Structure [Volume 19, Issue 5, 2019, Pages 1283-1295]
• Control Parameter Dynamics analysis of pipe conveying fluid with axial and rotational motion [Volume 16, Issue 9, 2016, Pages 387-393]
• Control Point Method Optimum design of functionally graded cylindrical shell with piezoelectric layer under moving load [Volume 15, Issue 8, 2015, Pages 291-300]
• Control Point Method Optimization of an FG cylindrical shell under hydro-mechanic and moving radial load employing imperialist competitive algorithm [Volume 16, Issue 9, 2016, Pages 318-328]
• Control Strategy Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]
• Control Surface Design and Test of a Solid Propellant Gas Generator Set for a Gaseous Actuator of a Flying Object’s Control Surface [Volume 16, Issue 3, 2016, Pages 211-222]
• Control Surfaces A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
• Control Surfaces Experimental investigation of the effect of displacement of stern planes on reducing non-uniformity and fluctuations of a submarine's wake flow [Volume 21, Issue 4, 2021, Pages 209-224]
• Control unit Investigation of the effect of control unit on disruption to fault detection of vehicle active suspension system with hydraulic actuator [Volume 17, Issue 4, 2017, Pages 443-452]
• Control Volume Analysis of elastoplastic behavior of beam subjected to axial dynamic loading using transport equations [Volume 15, Issue 11, 2015, Pages 97-104]
• Convection Combined radiative-convective inverse design problem in a 2-D channel filled with radiating gases [Volume 17, Issue 4, 2017, Pages 117-124]
• Convection Numerical Investigation of Convection around Heated Circular Cylinder Wrapped with Bi-Disperse Porous Medium in Channel [Volume 19, Issue 3, 2019, Pages 539-548]
• Convection-Diffusion problem Investigation of convection-diffusion process in a two-phase air-water flow using Smoothed Particle Hydrodynamics [Volume 17, Issue 2, 2017, Pages 115-125]
• Convection-Diffusion-Reaction equations Image-based computational modeling of the FDG tracer in a solid tumor with a consideration of capillaries network [Volume 18, Issue 7, 2018, Pages 88-96]
• Convective boundary condition Investigation of MHD nano-fluid flow over a stretching surface with velocity slip and convective surface boundary conditions [Volume 15, Issue 3, 2015, Pages 208-218]
• Convective heat transfer Experimental investigation of convective heat transfer of Al2O3/water nanofluid through the micro heat exchanger [Volume 15, Issue 2, 2015, Pages 270-280]
• Convective heat transfer Numerical modeling of internal convection heat transfer of magnetic fluid in the pulse magnetic field and different time frequencies [Volume 15, Issue 6, 2015, Pages 91-98]
• Convective heat transfer Experimental study of transient cooling of fluid inside a closed reservoir by using CuO/water nanofluid [Volume 15, Issue 6, 2015, Pages 99-106]
• Convective heat transfer Effect of cut twisted tape and Al2O3 nanofluid on heat transfer of double tube heat exchanger [Volume 15, Issue 11, 2015, Pages 181-190]
• Convective heat Transfer enhancement Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
• Conventional and Bach-Type Models [Volume 19, Issue 11, 2019, Pages 2599-2606]
• Conventional Cutting Machining error due to spring-back of work-piece in conventional and ultrasonic vibration assisted turning [Volume 11, Issue 3, 2011, Pages 27-42]
• Conventional Drilling Experimental Investigation of Thermal Necrosis in Conventional and High Speed Drilling of Bone [Volume 13, Issue 10, 2013, Pages 105-117]
• Conventional Drilling Study of microhardness variations in hole making processes on 4340 steel [Volume 17, Issue 1, 2017, Pages 423-430]
• Conventional Milling Modeling the cutting force in ultrasonic-vibration assisted milling and its empirical study [Volume 14, Issue 9, 2014, Pages 10-16]
• Conventional Milling The Effect of Cutting Parameters and Vibration Amplitude on Cutting Forces in Vibration-Assisted Side Milling Process of Al7022 Aluminum Alloy [Volume 15, Issue 5, 2015, Pages 392-396]
• Convergence speed A dual-time implicit power-law preconditioning method for solving unsteady incompressible flows [Volume 16, Issue 2, 2016, Pages 99-110]
• Convergent-divergent nozzle Numerical analysis of shock and various parameters effects on two-phase flow in convergent-divergent nozzle using equilibrium and non-equilibrium methods [Volume 15, Issue 7, 2015, Pages 40-52]
• Convergent-divergent nozzle Experimental investigation of the penetration effects of opposite dual protuberances on thrust vector of a supersonic C-D nozzle [Volume 19, Issue 7, 2019, Pages 1741-1750]
• Convergent-divergent nozzle Numerical and Experimental Investigation of the Effect of Nozzle Divergent Section Geometry on Fluid Flow and Heat Transfer within the Nozzle [Volume 20, Issue 2, 2020, Pages 467-473]
• Convergent Nozzle Investigating the Fluctuating Nature of Flow in the Hartmann-Sprenger Tube [Volume 24, Issue 6, 2023, Pages 341-349]
• Converging-diverging nozzle Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
• Converging Microchannels Effects of convergence of the superhydrophobic walls on the performance of microchannels as heat sinks [Volume 17, Issue 7, 2017, Pages 49-58]
• Convex optimization Optimal Motion Planning of a 3-DOF Decoupled Parallel Robot Using Convex Optimization and Receding Horizon Concept [Volume 15, Issue 8, 2015, Pages 197-206]
• Convex optimization Motion planning of mobile robots in the unknown circumstances based on the receding horizon control and velocity obstacle concepts [Volume 17, Issue 11, 2017, Pages 259-268]
• Conveying Fluid Carbon Nanotube Forced vibration analysis of conveying fluid carbon nanotube resting on elastic foundation based on modified couple stress theory [Volume 15, Issue 3, 2015, Pages 27-34]
• Convolutional Neural Network Learning of the 5-finger robot hand using deep learning for stable grasping [Volume 23, Issue 5, 2022, Pages 307-316]
• ConWep The Study of Various Clamped Isotropic Square Plate Simulating Methods and Compare with Experimental Results under Explosion Loads [Volume 14, Issue 13, 2014, Pages 315-322]
• Cooler Numerical investigation of reciprocating flow in a shell and tube heat exchanger used as a cooler in gamma Stirling engine [Volume 17, Issue 10, 2017, Pages 359-366]
• Cooling Investigating the effect of cooling channel roughness and coolant humidity on the creep life of gas turbine blades [Volume 16, Issue 1, 2016, Pages 89-100]
• Cooling Capability assessment of usual designing methods in approximating the required length of air-earth heat exchangers for cooling application [Volume 16, Issue 1, 2016, Pages 365-368]
• Cooling Three dimensional investigation of gas turbine cooling techniques on a flat plate and presentation a method with maximum cooling effectiveness [Volume 16, Issue 4, 2016, Pages 77-87]
• Cooling Effects of different inlet/outlet arrangements on performance of a trapezoidal porous microchannel heat sink [Volume 16, Issue 8, 2016, Pages 269-280]
• Cooling Analysis of block and cylinder head separate cooling system [Volume 18, Issue 1, 2018, Pages 413-422]
• Cooling Modification of Mechanical Properties of Al6061 Aluminum Alloy Joint Formed Using Friction Stir Welding by Increasing the Cooling Rate and Application of Vibration [Volume 19, Issue 6, 2019, Pages 1551-1558]
• Cooling Experimental study of the effect of using phase change material to improve electrical insulation of power distribution transformers [Volume 24, Issue 1, 2023, Pages 21-30]
• Cooling channel Numerical analysis of vane and cooling channels roughness effect on temperature distribution of gas turbine vane [Volume 16, Issue 7, 2016, Pages 200-206]
• Cooling Jacket Numerical Simulation of the Boiling Phenomenon in Improving the Cooling of a Heavy-Duty Diesel Engine with Natural Gas [Volume 19, Issue 2, 2019, Pages 363-373]
• Cooling Loop Numerical modeling of magnetic nanofluid pumping in a closed cooling loop by using magnetic field and thermomagnetic effect [Volume 17, Issue 11, 2017, Pages 109-117]
• Cooling Power Exergy Analysis of the Adsorbent Bed in adsorption chillers [Volume 14, Issue 2, 2014, Pages 70-78]
• Cooling system Experimental investigation of effects of engine cooling temperature, EGR and injection timing to reduce NOx emissions in the diesel engines [Volume 11, Issue 4, 2011, Pages 1-9]
• Cooling tower Verification of Pre-Cooling Effects on Saturation ‎Effectiveness of Evaporative Coolers [Volume 13, Issue 13, 2013, Pages 188-199]
• Cooling tower Optimization of hybrid cooling system including direct evaporative cooler- cooling tower in order to minimize operation cost using genetic algorithm [Volume 15, Issue 4, 2015, Pages 348-354]
• Cool Roof Thermal Performance Investigation of Residential Buildings with Cool and Green Roofs under Different Climates of Iran [Volume 20, Issue 7, 2020, Pages 1883-1894]
• Cooperative robot manipulator system Designing backstepping controller for positionforce tracking of cooperative robot manipulators [Volume 17, Issue 9, 2017, Pages 45-54]
• Cooperative Search Performance Study of Distributed Control Algorithm for Cooperative Search using Multi-Agent System [Volume 18, Issue 7, 2018, Pages 68-78]
• Coordinate Measuring Machine New sampling method of free-form surfaces on coordinate measuring machine equipped with contact probe [Volume 16, Issue 8, 2016, Pages 55-64]
• COP Thermodynamic analysis and optimization of a novel ejector- cascade refrigeration cycle [Volume 14, Issue 7, 2014, Pages 85-93]
• COP Study of water mist system for pre-cooling the entering air of an air-cooled chiller condenser [Volume 16, Issue 7, 2016, Pages 111-120]
• COP First and second laws of thermodynamics analysis of transcritical N2O refrigeration cycle with an ejector [Volume 18, Issue 1, 2018, Pages 433-440]
• Copper-nickel alloy A study on the microstructure and mechanical properties of dissimilar joints of copper-nickel alloy and austenitic stainless steel welded by GTAW process [Volume 17, Issue 8, 2017, Pages 49-58]
• Copper surface Pool boiling enhancement by electrodeposited porous micro/nanostructured on copper surface [Volume 15, Issue 12, 2015, Pages 159-167]
• Copper Wire Optimizing the Joining Strength of Wire Splices using Ultrasonic Metal Welding [Volume 25, Issue 10, 2024, Pages 625-634]
• Coprocessor A framework for developing an FPGA based coprocessor for accelerating numerical computations [Volume 17, Issue 10, 2017, Pages 58-64]
• Core Analytical study of high velocity impact on sandwich panels with foam core and aluminum face-sheets [Volume 15, Issue 6, 2015, Pages 231-239]
• Core Power Control Predictive Functional Control for Tracking of Core Power Variations in Pressurized Water Reactor based on Laguerre functions and Reduced-Order Model [Volume 18, Issue 1, 2018, Pages 299-306]
• Cork Experimental Analysis of Impact Loading on Sandwich Panels with Glass/Epoxy Composite Faces and Cork Core [Volume 25, Issue 1, 2024, Pages 55-63]
• Corner radii Accuracy of small radius corners in multi stage WEDM: Roughing parameters and geometrical analysis [Volume 13, Issue 7, 2013, Pages 87-101]
• Corona Discharge Numerical Simulation of electrohydrodynamic flow produced by wire-to-cylinder in atmospheric condition [Volume 18, Issue 2, 2018, Pages 323-330]
• Coronary Arteries Mechanical pulse signal analysis in order to feature extraction to use in the diagnosis of CAD [Volume 18, Issue 1, 2018, Pages 62-68]
• Coronary Artery A finite element study on the effect of the partial flexibility of the stent strut on hemodynamic parameters affecting the restenosis risk in the coronary stent deployment site [Volume 16, Issue 5, 2016, Pages 339-347]
• Coronary Artery Numerical study of the effect of stenosis on the hemodynamic parameters in branch of LAD coronary using 0D/3D coupling method [Volume 16, Issue 12, 2016, Pages 195-203]
• Coronary Artery Bifurcation Numerical Evaluation of the Effect of Percentage and Location of Stenosis on the Hemodynamic Bifurcation of the Left Coronary Artery [Volume 19, Issue 3, 2019, Pages 743-752]
• Coronary Stent Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
• Corona wind Numerical investigation of the electric field effect on the flow field and enhancement of the water evaporation rate [Volume 16, Issue 1, 2016, Pages 101-110]
• Co-rotational approach Using co-rotational approach for analysing nonlinear dynamic tensegrity structures [Volume 14, Issue 14, 2014, Pages 245-250]
• Corrosion Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of prestressed pipe monitoring using Acoustic Emission technique [Volume 17, Issue 2, 2017, Pages 306-314]
• Corrosion Effect of Grain Size Reduction thruogh Multi Directional Forging Process on Corrosion and Wear Properties of Commercially Pure Titanium [Volume 20, Issue 3, 2020, Pages 623-636]
• Corrosion Assessment of the Corrosion and Tribological Properties of Double Layer Nitride Coatings Performed by Plasma Nitriding and Cathodic Arc Evaporation on Ti-6Al-4V Alloy [Volume 20, Issue 6, 2020, Pages 1555-1565]
• Corrosion Study of the effect of burnishing process on the surface roughness, micro hardness and corrosion of 316 L stainless steel implant machined by the electrical discharge machining process [Volume 21, Issue 3, 2021, Pages 129-142]
• Corrosion Investigating the Affecting Factors on the Bond of FRP Rebars in Concrete [Volume 24, Issue 11, 2023, Pages 109-116]
• Corrosion behavior Investigation of ECAR process on the corrosion behavior of pure commercial copper [Volume 17, Issue 10, 2017, Pages 39-46]
• Corrosion test Experimental study on corrosion behavior of multi-layered sheet metals after laser forming [Volume 16, Issue 12, 2016, Pages 501-508]
• Corrugated Composite Beam Evaluation of corrugated composite beam deflection by shape memory alloy wire [Volume 14, Issue 8, 2014, Pages 49-58]
• Corrugated composite core Experimental investigation on core shape effect on compressive properties of sandwich structures with composite skins, corrugated composite core and foam [Volume 15, Issue 4, 2015, Pages 51-57]
• Corrugated sandwich plate Experimental and numerical investigation of interlayer crack effects on the Free-vibration of corrugated-face sheet composite sandwich plates [Volume 16, Issue 5, 2016, Pages 39-50]
• Cosine law Experimental Investigation on Parameters Affecting the Directional Sensitivity of Hot Wire Anemometer [Volume 18, Issue 4, 2018, Pages 110-116]
• Cost Multi-Objective Optimization of Comfort-Cost for Cooling and Heating Systems at the Faculty of Engineering of Arak University [Volume 20, Issue 3, 2020, Pages 531-537]
• Cost estimation equations Determining the estimation equations heat exchanger cost in Iran [Volume 12, Issue 1, 2012, Pages 33-40]
• Couette Flow Molecular dynamics simulation of Couette flow behavior in smooth and rough nanochannels [Volume 15, Issue 7, 2015, Pages 119-130]
• Counter-current flow Identification of flow patterns maps for counter-current Two-phase flow in large diameter tubes [Volume 16, Issue 12, 2016, Pages 433-444]
• Counter-flow Jet Numerical study of the effect of the extended nozzles on drag reduction of blunt body with counter-flow jet in supersonic turbulent flow [Volume 18, Issue 3, 2018, Pages 259-270]
• Coupled Dynamic Modeling Design, Manufacturing, and Comprehensive Dynamic Modeling of a Piezoelectric Pneumatic Servo Valve Based on Compliant Mechanisms [Volume 24, Issue 10, 2023, Pages 631-641]
• Coupled equations Vibro-acoustic optimization of submerged stiffened plate [Volume 15, Issue 8, 2015, Pages 301-311]
• Coupled Eulerian - Lagrangian Numerical and Experimental Investigation of a Projectile Water Entry Problem and Study of Velocity Effect on Time and Depth of Pinch-off [Volume 15, Issue 2, 2015, Pages 53-60]
• Coupled Eulerian-Lagrangian Investigation on temperature changes of Mg cold rolling process with the Coupled Eulerian-Lagrangian (CEL) method [Volume 17, Issue 10, 2017, Pages 123-128]
• Coupled Field Finite Contact Acoustic Nonlinearity Identification via Online Vibro-Acoustic Modulation Technique [Volume 20, Issue 7, 2020, Pages 1719-1730]
• Coupled Lagrangian-Eulrian method Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
• Coupled Method Numerical study of conjugate heat transfer phenomena in a reacting flow [Volume 16, Issue 1, 2016, Pages 353-360]
• Coupled Method A BEM/RANS Coupled Method for Numerical Simulations of Podded Drive System [Volume 17, Issue 2, 2017, Pages 65-76]
• Coupled model Numerical modeling of air bubbles entrainment in liquid slug body at Horizaontal duct [Volume 17, Issue 4, 2017, Pages 177-187]
• Coupled Roll and Heave Motions Nonlinear vibrations modeling and sensitivity analysis of the coupled roll and heave motions of a ship [Volume 15, Issue 12, 2015, Pages 200-208]
• Coupled simulation of electromagnetic forming Tube electromagnetic forming coupled simulation with ANSYS and LS-DYNA and comparison with experimental results [Volume 15, Issue 5, 2015, Pages 159-164]
• Coupled vibration Dynamic Analysis And Coupled Vibration Of Variable pitch Propeller [Volume 15, Issue 9, 2015, Pages 170-178]
• Couple Stress Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
• Couple-stresses The effect of couple-stresses on the elastodynamic field of a diffracted wave by an embedded nano-cavity in an infinite medium [Volume 15, Issue 8, 2015, Pages 1-9]
• Couple Stress Model Analysis of Static Performance of Noncircular Lobed Journal Bearings with Lubricants Containing TiO2 Nanoparticles Using Couple Stress Fluid Model [Volume 19, Issue 1, 2019, Pages 151-157]
• Couple stress theory Dynamic and static pull-in instability analysis of partially affected nano-cantilevers using modified couple stress theory [Volume 16, Issue 11, 2016, Pages 81-91]
• Couple stress theory Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2017, Pages 42-46]
• Couple-stress theory Exact solutions of flow between two concentric pipes and flow over porous wall by a new couple-stress theory [Volume 17, Issue 2, 2017, Pages 369-376]
• Coupling Algorithm Numerical Analysis of Oscillations of Flexible Strip Attached to Rigid Body in Compressible Viscous Flow via 3D Fluid-Structure Interaction Simulation [Volume 20, Issue 1, 2020, Pages 139-147]
• Coupling Mechanism Design New Cable System to Drive Exoskeleton Fingers for Rehabilitation [Volume 19, Issue 1, 2019, Pages 201-209]
• Coupling of the fracture modes Mixed mode two dimensional weight functions for the subsurface elliptical cracks under normal loadings [Volume 14, Issue 10, 2014, Pages 50-58]
• Coupling of the fracture modes Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
• Coupling of the fracture modes Mixed mode stress intensity factors for a crack parallel to the free surface of a half-plane under uniform loading [Volume 18, Issue 2, 2018, Pages 219-224]
• Courtyard Numerical analysis of the performance of four-sided wind tower attached to parlor and courtyard in different wind incident angles [Volume 16, Issue 12, 2016, Pages 125-134]
• Courtyard Investigating courtyard and its design parameters for thermal performance and comfort in Tehran climate [Volume 17, Issue 4, 2017, Pages 369-380]
• CPR Design and Construction of a Novel Automated and Portable Chest Compression Device [Volume 18, Issue 1, 2018, Pages 258-264]
• Crack Experimental Investigation of Crack Initiation and Fatigue Life of Spot Weld Coach Peel Specimens [Volume 8, Issue 1, 2008, Pages 99-114]
• Crack Vibration analysis of rotating tapered cantilever beams and using genetic algorithms to detect cracks in these beams [Volume 13, Issue 8, 2013, Pages 1-13]
• Crack Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
• Crack Free vibration analysis of cracked rotating multi-span Timoshenko beams using differential transform method [Volume 15, Issue 10, 2015, Pages 173-182]
• Crack Analysis and Modeling of Damage and Crack Growth in Composite Workpieces under Machining Process using the Bond-Based Peridynamic Theory [Volume 23, Issue 10, 2022, Pages 209-221]
• Crack Experimental Investigation of Very High Cycle Fatigue in DP1000 Steel [Volume 25, Issue 1, 2024, Pages 43-54]
• Crack arrester arrangement Analytical modeling of fracture toughness JIC of austenitic–martensitic functionally graded steels with crack arrester layers [Volume 13, Issue 11, 2013, Pages 110-121]
• Crack arrest toughness Experimental measurement of critical crack tip opening angle in API X65 steel using drop weight tear test specimen [Volume 23, Issue 2, 2022, Pages 81-91]
• Crack closure effect Using the finite cell method to predict ductile damage with crack closure effect [Volume 14, Issue 13, 2014, Pages 107-118]
• Crack defect Non-destructive Inspection of Subsurface Cracks in Carbon-fiber and Glass-fiber Reinforced Polymeric Materials Using Digital Shearography Method [Volume 22, Issue 5, 2021, Pages 311-322]
• Crack detection Detection of Size and Location of Crack in Pipes Under Fluid Pressure by Neural Networks [Volume 14, Issue 7, 2014, Pages 35-42]
• Crack detection Breathing crack identification in beam-type structures using cat swarm optimization algorithm [Volume 15, Issue 12, 2015, Pages 17-24]
• Cracked Cylinder Explicit expressions of stress intensity factor for external semi-elliptical circumferential cracks in a cylinder under mechanical and thermal loads [Volume 14, Issue 9, 2014, Pages 90-98]
• Cracked Pipe Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
• Cracked plate An introduction of new polynomial functions for nonlinear vibration analysis of cracked rectangular plates involving free edges [Volume 14, Issue 15, 2014, Pages 24-32]
• Cracked Timoshenko Beam Vibration analysis of a variable cross-section cracked Timoshenko beam and their crack detection using genetic algorithm [Volume 13, Issue 13, 2013, Pages 78-89]
• Crack Growth Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
• Crack Growth Experimental and numerical investigation of crack growth in adhesive bonding of two composites plates under mode I [Volume 16, Issue 5, 2016, Pages 271-280]
• Crack Growth On fracture analysis of exploded pressure vessels and pipes [Volume 16, Issue 5, 2016, Pages 297-302]
• Crack Growth Numerical investigation of dynamic crack growth in steel pipes under internal detonation loading [Volume 17, Issue 9, 2017, Pages 214-224]
• Crack Growth Experimental measurements and finite element residual stress caused by welding aluminum sheets and investigating its effect on natural frequency values [Volume 18, Issue 4, 2018, Pages 174-180]
• Crack Growth Investigating the Crack Propagation at the Surface of the Composite Patch Bonding to the Steel Substrate [Volume 19, Issue 8, 2019, Pages 1897-1906]
• Crack growth rate Simulation of crack growth rate in T56 jet engine compressor blade using Raju-newman method [Volume 17, Issue 11, 2017, Pages 21-30]
• Cracking Improvement of rotary draw bending of commercial pure titanium tubes with resistance deformation and using steel ball [Volume 22, Issue 6, 2021, Pages 371-380]
• Crack Initiation Experimental Investigation of Crack Initiation and Fatigue Life of Spot Weld Coach Peel Specimens [Volume 8, Issue 1, 2008, Pages 99-114]
• Crack Initiation Optimization of Spring-back in Bending Process of Aluminum A1050-H14 Sheet Using Hybrid of Finite Element Method and Multi-Objective Genetic Algorithm [Volume 19, Issue 4, 2019, Pages 919-925]
• Crack path prediction Fatigue lifetime and crack path prediction in four-point bending test of friction stir Cu-7075-T6 Aluminum alloy welded joints [Volume 14, Issue 8, 2014, Pages 193-198]
• Crack propagation Fully Automatic Crack Propagation Modeling in the Interaction with Void and Inclusion without Remeshing [Volume 15, Issue 7, 2015, Pages 261-273]
• Crack propagation Effects of the speed of applying loads on the growth of inclined crack in plates using Peridynamic theory [Volume 17, Issue 1, 2017, Pages 403-412]
• Crack Stress Concentration An investigation on the stress concentration factor in unidirectional composite lamina with angled and staggered crack [Volume 15, Issue 12, 2015, Pages 472-480]
• Crack tip opening angle Experimental measurement of critical crack tip opening angle in API X65 steel using drop weight tear test specimen [Volume 23, Issue 2, 2022, Pages 81-91]
• Crack tip plastic zone" Effect of Angel of the Crack Axial on Shape of Crack Tip Plastic Zone for Orthotropic Materials under Various Loading Conditions [Volume 17, Issue 11, 2017, Pages 199-209]
• Craniotomy Kinematic Analysis and Mechatronic Design of a 3-DOF Parallel Robot for Craniotomy Surgery [Volume 17, Issue 11, 2017, Pages 289-299]
• Cranked Arrow Delta Wing Aeroacoustic Investigation of Flow over the Diamond, Cropped and Cranked Arrow Delta Wings Using Large Eddy Simulation Approach [Volume 17, Issue 5, 2017, Pages 430-438]
• Cranked kite wing Numerical Analyses of the Vortical Flow over the Cranked Kite Wing in Ground Proximity [Volume 17, Issue 4, 2017, Pages 41-51]
• Crankshaft Theoretical, Analytical and Experimental Analysis Of Torsional Vibration On the Vehicle Crankshaft [Volume 12, Issue 5, 2012, Pages 102-111]
• Crankshaft Investigating the Forces Acting on the Crankshaft with Abaqus Software [Volume 24, Issue 11, 2023, Pages 117-120]
• Crashworthiness Optimization of honeycomb impact attenuator using genetic algorithm based on response surface method and design of experiment; Part I: crashworthiness [Volume 15, Issue 12, 2015, Pages 25-36]
• Crashworthiness Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach [Volume 17, Issue 12, 2017, Pages 505-513]
• CRB Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test [Volume 17, Issue 3, 2017, Pages 451-454]
• CRB Process Characterization of the Plastic and Elastic Properties of Aluminum Sheet Produced by CRB Process via DIC Method [Volume 19, Issue 2, 2019, Pages 505-513]
• Creep Behavior Obtaining the creep constitutive parameters for the layers of butt-welded 1.25Cr0.5Mo pipe [Volume 15, Issue 9, 2015, Pages 407-416]
• Creep buckling Creep buckling analysis of rectangular viscoelastic thick plate by pseudo-transient finite element method [Volume 13, Issue 13, 2013, Pages 132-142]
• Creep Crack Growth Investigating effect of Norton and Liu – Murakami creep models in determination of creep fracture mechanic parameter (C*) [Volume 15, Issue 12, 2015, Pages 425-434]
• Creep Fracture Parameter Investigating effect of Norton and Liu – Murakami creep models in determination of creep fracture mechanic parameter (C*) [Volume 15, Issue 12, 2015, Pages 425-434]
• Creep Life Investigating the effect of cooling channel roughness and coolant humidity on the creep life of gas turbine blades [Volume 16, Issue 1, 2016, Pages 89-100]
• Creep properties Micromechanical modeling for prediction of the creep behavior of fibrous composite materials [Volume 16, Issue 8, 2016, Pages 249-260]
• Creep-recovery strain Investigation of interphase effect on the non-linear viscoelastic behavior of multiphase polymer composites [Volume 16, Issue 1, 2016, Pages 181-191]
• Criminale–Eriksen–Filbey constitutive equation Nonlinear simulation of viscoelastic fingering instability [Volume 16, Issue 8, 2016, Pages 47-54]
• Critical Buckling Load Buckling analysis of moderately thick composite conical shells using Galerkin and DQ methods [Volume 15, Issue 12, 2015, Pages 367-375]
• Critical force and time Dynamic Modeling and simulation of nano particle motion in different environments using AFM nano –robot [Volume 15, Issue 1, 2015, Pages 294-300]
• Critical force and time Effect of different geometrical parameters of atomic force microscope cantilevers in critical force and time based on manipulation with applying EFAST sensitivity analyses [Volume 15, Issue 1, 2015, Pages 310-316]
• Critical force and time 3D-Dynamic Modeling and simulation of biological nanoparticle motion using AFM nano–robot [Volume 15, Issue 12, 2015, Pages 311-316]
• Critical force and time Investigation and Sensitivity Analysis of Dimensional Parameters and Velocity in the 3D Nanomanipulation Dynamics of Carbon Nanotubes Using Statistical Sobol Method [Volume 19, Issue 1, 2019, Pages 125-135]
• Critical Heat Flux Experimental investigation of the effect of roughness orientation of surface on motion of bubbles and critical heat flux [Volume 17, Issue 12, 2017, Pages 531-541]
• Critical Heat Flux Experimental Study of the Effect of Hybrid Nanofluids Deposition on Microchannels with Different Sections in Pool Boiling [Volume 19, Issue 11, 2019, Pages 2653-2666]
• Critical Lane Change Motion Planning in Critical Lane Change Maneuvers Considering the Stability Margins of the Vehicle [Volume 24, Issue 4, 2023, Pages 225-238]
• Critical load Fracture assessment of specimens weakened by U-notch made of functionally graded materials under mode I loading [Volume 17, Issue 2, 2017, Pages 1-9]
• Critically Refracted Longitudinal Wave Behavior of Critically Refracted Longitudinal and Lamb Waves with Stress Variations in Al 1050 Sample [Volume 20, Issue 5, 2020, Pages 1223-1234]
• Critical Reynolds number Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]
• Critical Speed Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
• Critical Speed On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
• Critical Speed Dynamics analysis of pipe conveying fluid with axial and rotational motion [Volume 16, Issue 9, 2016, Pages 387-393]
• Critical Speed Vibration Analysis of a Laminated Deep Curved Beams Subjected to a Moving Load by Considering the Rotary Inertia and Shear Force [Volume 17, Issue 7, 2017, Pages 141-151]
• Critical Speed Investigation of the cancellation, resonance and maximum amplitude of free vibration phenomena in laminated curved Timoshenko beams under moving loads [Volume 18, Issue 9, 2018, Pages 69-80]
• Critical Strain Energy Release Rate of the Mode I Fracture Experimental Investigation of the Effect of the Functional Pattern of Laser Surface Treatment on the Strength of Aluminum / Composite Adhesive Bonded Joint in the Mode I Fracture [Volume 23, Issue 8, 2022, Pages 485-495]
• Critical submergence Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
• Critical velocity Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
• Critical velocity Numerical Investigation of Two Simultaneous Fires in a Tunnel and Evaluation of the Obstructive Influence of Vehicles by Large Eddy Simulation [Volume 13, Issue 15, 2013, Pages 10-22]
• Critical velocity Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
• Critical velocity Vibration Characteristics of Fluid-Conveying Pipes in presence of a Dynamic Vibration Absorber [Volume 17, Issue 7, 2017, Pages 31-38]
• Critical ventilation velocity Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
• Cr- Mo Steel Alloy Obtaining the creep constitutive parameters for the layers of butt-welded 1.25Cr0.5Mo pipe [Volume 15, Issue 9, 2015, Pages 407-416]
• Cropped Delta Wing An Analytical & Experimental Investigation of Effects of Store on Flutter Speed for Cropped Delta Wing/Store Model in Low subsonic Regime [Volume 15, Issue 7, 2015, Pages 61-72]
• Cropped Delta Wing Aeroacoustic Investigation of Flow over the Diamond, Cropped and Cranked Arrow Delta Wings Using Large Eddy Simulation Approach [Volume 17, Issue 5, 2017, Pages 430-438]
• Cross Correlation Fast and Precise Estimation of Displacement and Strain Fields in Elastography Imaging Technique [Volume 19, Issue 2, 2019, Pages 303-315]
• Cross correlation functions Evaluation of the damage detection capability of Inner product vector for LOP and LOSWF defects in a groove weld [Volume 16, Issue 6, 2016, Pages 7-16]
• Cross flow Evaluation the Effect of Using Two Fuel Nozzles on Droplet Diameter in Cross Flow [Volume 18, Issue 7, 2018, Pages 260-266]
• Cross-flow Injection of twin oblique nanofluid jets into a water cross-flow: An Eulerian-Eulerian two-phase analysis [Volume 17, Issue 12, 2017, Pages 123-134]
• Crossflow Experimental Study of Effective Factors on Liquid Jet Trajectory and Breakup in Gaseous Crossflow [Volume 17, Issue 12, 2017, Pages 354-360]
• Cross-flow Filtration Numerical Study on the Impact of DC Electric Field on Fouling Characteristics of Cross-Flow Filtration [Volume 19, Issue 5, 2019, Pages 1061-1073]
• Crossing obstacles Trajectory and control design of a quadcopter for crossing obstacles using sliding mode method [Volume 17, Issue 6, 2017, Pages 351-356]
• Cross Linking Study of the structure and glass transition behavior of epoxy polymers using molecular dynamics [Volume 14, Issue 6, 2014, Pages 107-112]
• Cross Model Determination of rheological parameters of the Cross model for semi-solid Al7075 by using parallel plate compression and backward extrusion experiments [Volume 16, Issue 9, 2016, Pages 97-106]
• Cross-ply thin cylinders Interlaminar and boundary layer stress analysis in thin corss-ply composite cylinders subjected to thermal loading for various boundary conditions [Volume 16, Issue 1, 2016, Pages 257-268]
• Cross section Effect of work-piece cross section on the mechanical properties of commercially pure titanium produced by Equal Channel Angular Pressing [Volume 15, Issue 6, 2015, Pages 157-166]
• Cross-sectional distortion Improvement of rotary draw bending of commercial pure titanium tubes with resistance deformation and using steel ball [Volume 22, Issue 6, 2021, Pages 371-380]
• Crown layer Simulation of Droplet Impact on a Thin Liquid Film Using the Pseudopotential Multiphase Model [Volume 16, Issue 3, 2016, Pages 8-16]
• Cruciform Specimen Experimental and numerical studying of AL5083 alloy fracture using a cruci-form specimen under biaxial loading [Volume 17, Issue 12, 2017, Pages 391-399]
• Crude oil Numerical simulation of fluid flow in a centrifugal pump at design point and off-design conditions [Volume 16, Issue 2, 2016, Pages 88-98]
• Crude oil sample CFD Simulation of Transit-time Ultrasonic Flowmeter with PZT-5J Piezoelectric Sensor for Light, Heavy, and Medium Crude Oil [Volume 19, Issue 6, 2019, Pages 1337-1346]
• Cruise Range Multi-Objective Multidisciplinary Design Optimization of a General Aviation Aircraft [Volume 17, Issue 2, 2017, Pages 199-210]
• Crushing Properties Investigating the Effect of Annealing Heat Treatment on the Crushing Properties of Parts Fabricated of Polylactic Acid and 3D Printed using the Fused Deposition Modeling Method [Volume 25, Issue 4, 2024, Pages 183-190]
• Crushing strength Investigation on in-plane behavior of bare and foam-filled honeycombs in quasi-static and dynamic states by using numerical method [Volume 14, Issue 15, 2014, Pages 177-185]
• Cryogemic Machining Simulation of Microstructural Changes in Cryogenic Machining of Ti6Al4V Titanium Alloy Produced by Additive Manufacturing and Experimental Validation [Volume 23, Issue 10, 2022, Pages 107-111]
• Cryogenic RETRACTED: Comparison of Machined Surface Integrity in 304L Stainless Steel Turning under Minimum Quantity Lubrication (MQL) and Cryogenic (CO2) Conditions [Volume 23, Issue 11, 2022, Pages 577-585]
• Cryogenic aging Effect of Different Environmental Conditions on Impact Properties of FMLs Hybridized with Nanoclay [Volume 17, Issue 12, 2017, Pages 193-203]
• Cryogenic cooling The effect of lubrication type on tool temperature and wear in turning of AISI 304 steel [Volume 18, Issue 4, 2018, Pages 153-162]
• Cryogenic Impact Strength Effects of Arc Heat Input and Welding Speed on the Cryogenic Impact Strength of Type 304L Austenitic Stainless Steel Weld Metal [Volume 15, Issue 2, 2015, Pages 205-213]
• Cryogenic Machining Effect of Cryogenic Machining(turning) of AISI 440C Stainless Steel on Roughness, Hardness, Chip Morphology and Tool Wear Pattern [Volume 21, Issue 6, 2021, Pages 415-428]
• Cryogenics Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
• Cryogenic tanks A new design and thermo-mechanical coupled analysis for internal supports of the cryogenic fluids tanks [Volume 17, Issue 10, 2017, Pages 312-320]
• Crystalline Structure Cooling Down Process Effects on the Mechanical and Crystalline Properties of PA12 Parts Produced by Selective Laser Sintering [Volume 20, Issue 4, 2020, Pages 853-862]
• Crystallization Rate Cooling Down Process Effects on the Mechanical and Crystalline Properties of PA12 Parts Produced by Selective Laser Sintering [Volume 20, Issue 4, 2020, Pages 853-862]
• Crystal plasticity Simulation the mechanical behavior of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods [Volume 13, Issue 9, 2013, Pages 138-148]
• Crystal plasticity Work Hardening of FCC Crystals in Crystal Plasticity Theory [Volume 15, Issue 4, 2015, Pages 81-92]
• Crystal plasticity FE modeling Microstructure based micromechanical modeling of microstructural scale deformation in stainless steel 316L using crystal plasticity FEM [Volume 15, Issue 2, 2015, Pages 113-123]
• C-scan Utilizing Acoustic Emission for Studying Scaling and Layup Configuration Effect on Behavior of Glass/Epoxy Composite Materials Under Low-Velocity Impact [Volume 21, Issue 11, 2021, Pages 719-728]
• CSO algorithm Breathing crack identification in beam-type structures using cat swarm optimization algorithm [Volume 15, Issue 12, 2015, Pages 17-24]
• CSS Application of Isogeometric Analysis and Charged System Search Algorithm in Structural Shape Optimization [Volume 16, Issue 5, 2016, Pages 251-260]
• CST Design and Optimization of the Very Low Head Turbine by the “CST” Method [Volume 16, Issue 11, 2016, Pages 339-348]
• CT-scan Utilizing Acoustic Emission for Studying Scaling and Layup Configuration Effect on Behavior of Glass/Epoxy Composite Materials Under Low-Velocity Impact [Volume 21, Issue 11, 2021, Pages 719-728]
• Cu-30Zn Alloy Microstructure, Mechanical, and Electrical Properties of Cu-30Zn Alloys Produced by Multi-Directional Forging [Volume 19, Issue 8, 2019, Pages 1943-1952]
• Cuckoo Optimization Algorithm Sliding mode Control of 3-RPR parallel robot on the optimal path using Cuckoo Optimization Algorithm [Volume 15, Issue 2, 2015, Pages 147-158]
• Cu clad Al bimetallic wire rods Investigation of wire drawing parameters on interlayer pressure at Copper clad Aluminum wire [Volume 16, Issue 4, 2016, Pages 99-108]
• CUDA Investigation of Iterative Solvers Parallelization for Systems of Linear Equations Resulting from the Poisson Equation [Volume 23, Issue 11, 2022, Pages 627-639]
• CuO nanofluid Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
• CuO nanofluid Evaluation the effect of adding CNT and CuO to the base fluid on the health and surface roughness of Inconel 718 MQL grinding [Volume 22, Issue 5, 2021, Pages 335-345]
• Cup mean temperature The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
• Current Control Observer-Based Robust Adaptive Fuzzy Approach for Current Control of Robot Manipulators by Estimation of Uncertainties [Volume 17, Issue 6, 2017, Pages 286-294]
• Current distribution Modeling of PEM fuel cells performance using lumped method [Volume 18, Issue 1, 2018, Pages 188-198]
• Current distribution 1D- 1D Modeling of High Pressure PEM Electrolyzers for Hydrogen Production [Volume 19, Issue 7, 2019, Pages 1663-1674]
• Current Signal Improvement of Electrochemical Discharge Machining Depth through Modification of Tool-Workpiece Engagement Area [Volume 22, Issue 10, 2021, Pages 99-103]
• Curvature Analytic model for investigation of effect of temperature change on residual stress and curvature of symmetric and un-symmetric composite laminates [Volume 19, Issue 9, 2019, Pages 2155-2164]
• Curvature and Thickness Distribution Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2017, Pages 259-270]
• Curvature Nonlinearity Study of Static Deflection and Instability Voltage of Phase Shifter Micro-Switches Using a Nonlinear Beam Model and Non-localized elasticity theory [Volume 17, Issue 10, 2017, Pages 93-100]
• Curved Beam The Effect of Eccentricity on the Nonlinear Galloping of Cables Considering Wind Flow and Support Motion in 1:1 Internal Resonance [Volume 16, Issue 11, 2016, Pages 378-388]
• Curved boundary LBM for Modeling Cavities with Curved and Moving Boundaries [Volume 13, Issue 5, 2013, Pages 117-129]
• Curved boundary Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
• Curved Boundary Condition A new curved boundary treatment for the lattice Boltzmann method [Volume 13, Issue 8, 2013, Pages 28-41]
• Curved duct A Numerical Study of Bubbly Flow in a Curved Duct Using Front Tracking Method [Volume 16, Issue 2, 2016, Pages 179-188]
• Curved Microbeam Non-linear vibration of curved microbeam under electrostatic actuation by using reduced order model and finite element simulation [Volume 17, Issue 12, 2017, Pages 514-522]
• Curved Microbeam Investigating the Static Deformation and Instability Voltage of Viscoelastic Curved Microbeam [Volume 19, Issue 10, 2019, Pages 2375-2385]
• Curved plate Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
• Curved sandwich beam Dynamic analysis of the sandwich curved beams with flexible core in the steady state thermal condition and subjected to radial low-velocity impact and [Volume 16, Issue 9, 2016, Pages 113-123]
• Curved single carbon nanotube Primary resonance analysis of a curved single walled carbon nanotubes on the viscoelastic medium in thermal environment under harmonic force [Volume 18, Issue 5, 2018, Pages 211-217]
• Curved Timoshenko Beam Vibration Analysis of a Laminated Deep Curved Beams Subjected to a Moving Load by Considering the Rotary Inertia and Shear Force [Volume 17, Issue 7, 2017, Pages 141-151]
• Curve fitting Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
• Curvilinear Grid System Lattice Study of the Finite Volume-Lattice Boltzmann Method in Simulation of Laminar Viscous Compressible Flow [Volume 18, Issue 3, 2018, Pages 417-428]
• CUSP Modeling of 2D Two-Phase Flow in Cascade Blades of Steam Turbine Using Jameson’s Finite Volume Method with CUSP Technique [Volume 15, Issue 4, 2015, Pages 141-150]
• CUSP1995 Method Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
• CUSP2011Method (Low Diffusion E-CUSP or LDE) Numerical Analysis of compressible flow using E-CUSP2011 (LDE) method in Edge-based data structure in different meshes [Volume 17, Issue 7, 2017, Pages 225-235]
• CUSP method Optimization of CUSP Technique Using Inverse Modeling for Improvement of Jameson’s 2-D Finite Volume Method [Volume 14, Issue 8, 2014, Pages 174-182]
• CUSTOM 450 Alloy Investigation of Stress Distribution in Corrosion Pits on the Compressor Blade Using Boundary Element Method [Volume 21, Issue 9, 2021, Pages 601-613]
• Cut cell Using marching cube algorithm for 3D grain burn-back analysis in Solid Rocket Motors based on level set method [Volume 14, Issue 15, 2014, Pages 85-95]
• Cut-off Valve Mathematical and Numerical Modeling along with the Stability Analysis of Liquid Propellant Rocket Engine Cut-off Valve [Volume 14, Issue 8, 2014, Pages 95-102]
• Cutout Determination of mechanical response of composite cylinders including circular cutout subjected to uniform external hydrostatic pressure [Volume 15, Issue 9, 2015, Pages 360-370]
• Cutout Experimental study on ratcheting and softening behavior of stainless steel 304L thin-walled shells under cyclic pure bending load [Volume 16, Issue 4, 2016, Pages 324-332]
• Cutout Buckling analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method (GDQM) [Volume 17, Issue 11, 2017, Pages 385-396]
• Cut-Set Reliability Assessment of Multi-State System Based-On Fault Tree Analysis [Volume 15, Issue 1, 2015, Pages 257-266]
• Cutting and Feeding Forces Experimental Study of Cutting and Feeding Forces, Temperature and Surface Integrity in The Machining Process of Waspaloy [Volume 23, Issue 12, 2022, Pages 697-706]
• Cutting and Fine Cutting Processes Numerical Simulation of Cutting and Fine Cutting Processes by Lemaitre's Ductile Damage Model in Conjunction with Large Deformation Theory [Volume 13, Issue 6, 2013, Pages 96-102]
• Cutting Dynamic Simulation Cutting dynamic simulation of Low Immersion End Milling Operation: Effect of cutting depth and feed rate [Volume 10, Issue 2, 2010, Pages 19-30]
• Cutting fluid Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
• Cutting fluid Effect of graphite nanoparticles addition into cutting fluid on surface quality and tool wear of 16MnCr5 machinned steel [Volume 18, Issue 3, 2018, Pages 56-64]
• Cutting forces Analytical and experimental modeling of cutting force in plasma assisted turning of hardened steel [Volume 15, Issue 1, 2015, Pages 108-116]
• Cutting forces Invention of a New Ultrasonic Horn in 3D Ultrasonic Vibration Assisted Turning [Volume 19, Issue 8, 2019, Pages 1845-1854]
• Cutting forces Experimental Investigation, Mathematical Modeling and Optimization of Cutting Forces in the Automatic Process of Cortical Bone Milling [Volume 20, Issue 4, 2020, Pages 987-997]
• Cutting forces Sensitivity analysis modeling and optimization of cutting Forces and stool wear in milling of aluminum matrix composite [Volume 23, Issue 8, 2022, Pages 475-483]
• Cutting forces Study of Surface Roughness, Topography, and Cutting Forces in Finish Turning of 1.1191 Hardened Steel Using Textured Cutting Tool [Volume 24, Issue 1, 2023, Pages 31-40]
• Cutting forces An Empirical Study on the Effect of Feed Rate and Cutting Depth on the Cutting Force, Chip Temperature, Surface Roughness, and Microhardness Variation in Laser-Assisted Turning Compared to Conventional Turning of Waspaloy [Volume 24, Issue 6, 2023, Pages 363-371]
• Cutting Pressure Experimental Investigation of The Effect of Changes in the Machining Parameters of the Turn-Milling Process [Volume 23, Issue 10, 2022, Pages 43-49]
• Cutting rate Statistical analysis and optimization of process parameters for cutting rate and surface roughness in wire cut machining of TI-6AL-4V alloy [Volume 15, Issue 9, 2015, Pages 141-152]
• Cutting Speed The Effect of Cutting Parameters and Vibration Amplitude on Cutting Forces in Vibration-Assisted Side Milling Process of Al7022 Aluminum Alloy [Volume 15, Issue 5, 2015, Pages 392-396]
• Cutting Speed The effect of workpiece hardness and cutting parameters on surface roughness in dry hard turning of X210Cr12 cold tool steel [Volume 17, Issue 6, 2017, Pages 241-247]
• Cutting Speed Experimental Studies to Investigate the Cutting Forces, Surface Roughness and Tool Wear in the Machining Process of Hardened AISI 4140 [Volume 23, Issue 10, 2022, Pages 81-88]
• Cutting Speed Prediction of Tool Wear using Experimental Studies and Artificial Neural Network in Hardened Steel Machining [Volume 23, Issue 10, 2022, Pages 89-93]
• Cutting Speed Numerical Study on Different Parameters of Tool Wear During Machining of Aluminum Metal-Based Composites [Volume 23, Issue 10, 2022, Pages 137-142]
• Cutting Temperature Investigating the Effect of Optimal Selection of Vibration and Cutting Parameters on Cutting Forces and Temprature in the Ultrasonic Vibration Assisted Machining Process [Volume 22, Issue 10, 2021, Pages 105-111]
• Cut twisted tape Effect of cut twisted tape and Al2O3 nanofluid on heat transfer of double tube heat exchanger [Volume 15, Issue 11, 2015, Pages 181-190]
• Cu-water nanofluid Numerical Investigation and optimization Of Mixed Convection and Entropy Generation In Square Cavity With Lid-Driven [Volume 15, Issue 8, 2015, Pages 164-174]
• CW laser Numerical simulation of thermal effects of continuous wave laser on living tissue with blood perfusion [Volume 17, Issue 4, 2017, Pages 125-133]
• Cycle time Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
• Cyclic Bending Load Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
• Cyclic combined and axial loadings An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
• Cyclic Combined Load Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
• Cyclic Extrusion and Expansion Improvement of Cu Mechanical Properties by Cyclic Extrusion and Expansion under Hydrostatic Pressure [Volume 20, Issue 6, 2020, Pages 1583-1591]
• Cyclic force Design and Manufacturing of Chewing Simulation Machine [Volume 22, Issue 10, 2021, Pages 145-153]
• Cyclic loading A Hyper-Viscoelastic Model for an Individual Stem Cell Subjected to Cyclic Loading for Mechanical Modulation toward Differentiating to Fibrochondrocytes [Volume 17, Issue 7, 2017, Pages 207-216]
• Cyclic loading Calibration of Constitutive Models for Pressure-Sensitive Adhesives Based on Experimental Data [Volume 24, Issue 5, 2023, Pages 329-339]
• Cyclic pure bending load Experimental study on ratcheting and softening behavior of stainless steel 304L thin-walled shells under cyclic pure bending load [Volume 16, Issue 4, 2016, Pages 324-332]
• Cyclic softening/ hardening behavior Closed form solutions for inelastic cyclic bending of steel tubulars using continuous stress-strain model [Volume 16, Issue 12, 2016, Pages 756-766]
• Cyclic Symmetry Boundary Condition Thermal Residual Stress Analysis of CNTs Reinforced Polymer Using a Cyclic Symmetry Semi-Continuum Model [Volume 20, Issue 4, 2020, Pages 1041-1052]
• Cyclic Transformation Vibration Amplitude Reduction of the Disk-Blade System Using the Energy Absorbers Mounted on the Disk [Volume 20, Issue 2, 2020, Pages 391-402]
• Cyclic Variation Single-Cylinder SI Engine Performance in Dual-Fuel (Gasoline-NG) Mode with Gasoline Dominant Fuel under Stoichiometric Conditions [Volume 20, Issue 2, 2020, Pages 287-295]
• Cylinder Control of pressure fluctuations in SPH method for simulation of flow past a cylinder [Volume 13, Issue 7, 2013, Pages 32-44]
• Cylinder Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
• Cylinder An Analytical Solution of Steady State Conductive Heat Transfer in Cylindrical Composite Laminates [Volume 9, Issue 1, 2009, Pages 135-152]
• Cylinder Head The Effect of Changing Cylinder Head Material from Aluminium Alloy to Magnesium Alloy on its Low Cycle Fatigue Life [Volume 25, Issue 2, 2024, Pages 77-86]
• Cylinder Pressure Analysis Experimental Study of the Effects of Adding Diesel Fumigation to the Intake Air of an Engine on Emissions, Specific Fuel Consumption, and Cylinder Pressure Parameters [Volume 22, Issue 2, 2021, Pages 107-119]
• Cylinder strut Reliability assessment of cylinder strut of a training airplane by means of probabilistic design methodology [Volume 16, Issue 9, 2016, Pages 233-240]
• Cylindrical Channel Experimental investigation of force convection heat transfer in porous channel with internal heat generation [Volume 15, Issue 1, 2015, Pages 203-210]
• Cylindrical-conical-cylindrical horns Experimental Study and finite element simulation of Cylindrical-conical-cylindrical horns with Circular cross-section:Application on ultrasonic vibrations Sliding friction process [Volume 15, Issue 1, 2015, Pages 31-38]
• Cylindrical Hot Film Sensor Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
• Cylindrical sandwich panel buckling and Vibration analysis of a thick cylindrical sandwich panel with flexible core using an improved high-order theory [Volume 17, Issue 3, 2017, Pages 227-238]
• Cylindrical shell An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
• Cylindrical shell Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
• Cylindrical shell Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
• Cylindrical shell Thermo Elasto-Plastic analysis of functionally graded thick-walled cylindrical shells based on Prandtl-Reuss flow rule [Volume 15, Issue 1, 2015, Pages 211-218]
• Cylindrical shell Free vibration analysis of FG-CNTRC cylindrical shells surrounded by elastic foundation subjected to thermal loading [Volume 15, Issue 3, 2015, Pages 271-282]
• Cylindrical shell Nonlinear Forced vibration of pseudoelastic shape memory alloy cylindrical shell subjected to the time and space dependant internal pressure [Volume 15, Issue 7, 2015, Pages 1-12]
• Cylindrical shell Taguchi statistical analysis of experimental tests designed to absorb the energy of the composite shells [Volume 15, Issue 7, 2015, Pages 345-352]
• Cylindrical shell Optimum design of functionally graded cylindrical shell with piezoelectric layer under moving load [Volume 15, Issue 8, 2015, Pages 291-300]
• Cylindrical shell Optimization of an FG cylindrical shell under hydro-mechanic and moving radial load employing imperialist competitive algorithm [Volume 16, Issue 9, 2016, Pages 318-328]
• Cylindrical shell An investigation into the behavior of cylindrical shells with different thickness distributions under axial quasi-static and impact loadings [Volume 16, Issue 12, 2016, Pages 269-280]
• Cylindrical shell Comparison Buckling load of Cylindrical Shells with seam, Consist of Two Type of Circular or Lozenge Cutouts, by Numerical and Experimental Methods [Volume 16, Issue 12, 2016, Pages 414-424]
• Cylindrical shell Experimental and numerical analysis of the effect of cold on sound transmission from a steel cylindrical shell [(Articles in Press)]
• Cylindrical shells Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]
• Cylindrical shells Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
• Cylindrical shells Experimental and numerical investigation of internal inversion of metallic cylindrical shells under axial impact [Volume 16, Issue 3, 2016, Pages 295-304]
• Cylindrical shells Optimum design and construction of cylindrical energy absorber under internal pressure using time evolutionary optimization algorithm [Volume 23, Issue 1, 2022, Pages 45-55]
• Cylindrical surface A novel and comprehensive method for laser forming of cylindrical surfaces with arbitrary radius of curvature [Volume 15, Issue 12, 2015, Pages 9-16]
• Cylindrical Texture The effect of shell texturing on the performance of noncircular hydrodynamic two lobe journal bearings [Volume 18, Issue 2, 2018, Pages 293-304]
• Cylindrical tube Elasto-plastic behavior analysis and yield onset in FG cylindrical tubes under mechanical and thermal loads [Volume 16, Issue 2, 2016, Pages 159-166]