Modares Mechanical Engineering

Modares Mechanical Engineering

Keyword Index
A
  • Acoustic Using perturbation method to obtain scaled numerical model for analyzing noise of supercavitation [Volume 12, Issue 5, 2012, Pages 146-153]
  • Active flow control Effects of Duty Cycles of the Plasma Actuators on Improvement of the Pressure Distribution over NLF0414 Airfoil [Volume 12, Issue 1, 2012, Pages 106-114]
  • Active Flow Control Method Numerical and Experimental Investigation on the effect of a plasma actuator on NLF0414 Airfoils’ Efficiency after the Stall [Volume 12, Issue 6, 2012, Pages 104-116]
  • ADAMS/Rail Modeling of Depressed Center Wagon and Optimization of Its Suspension for Transporting of High Weight Transformers on Straight Rail in Vertical Direction [Volume 12, Issue 2, 2012, Pages 20-29]
  • Adhoc method Numerical Simulation of MHD Body Force Driven Flows Using Adhoc Body-Forces method [Volume 12, Issue 6, 2012, Pages 1-9]
  • Adiabatic model Analysis and optimization of beta-type Stirling engine taking into account the non-ideal regenerator thermal and hydraulic losses effects [Volume 12, Issue 2, 2012, Pages 45-57]
  • Adsorption Dynamic Modeling of a Solar Adsorption Refrigeration System [Volume 12, Issue 2, 2012, Pages 30-44]
  • Adsorption chiller Numerical study of the importance of inter particle mass transfer resistance in the modeling of porous bed of adsorption chillers [Volume 12, Issue 6, 2012, Pages 19-29]
  • Airfoil Effects of Duty Cycles of the Plasma Actuators on Improvement of the Pressure Distribution over NLF0414 Airfoil [Volume 12, Issue 1, 2012, Pages 106-114]
  • AISI D6 Steel Accurate Measurement of Mechanical properties of Tempered Microstractures of AISI D6 Alloy Steel by Ultrasonic Non Destructive Method [Volume 12, Issue 4, 2012, Pages 48-58]
  • Analytical Solution Analytical and Numerical Calculation of Flow Permeability in a Porous Medium with Square Cross Section [Volume 12, Issue 1, 2012, Pages 21-32]
  • API X65 Microalloyed Steel ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
  • Atomization The effect of various parameters on breakup length of the outflow from the nozzle [Volume 12, Issue 2, 2012, Pages 125-133]
  • AUSM Numerical modeling of two-phase slug flow in horizontal and inclined channels using hyperbolic two fluid model [Volume 12, Issue 4, 2012, Pages 34-47]
B
  • Ballistic behavior Experimental Investigation of Effect of nanoclay on Ballistic Properties and Mechanical Properties of 2D Woven Glass/Epoxy Composites [Volume 12, Issue 1, 2012, Pages 11-20]
  • Bees Algorithm Optimal Design of Plate-Fin Heat Exchangers by a Bees Algorithm [Volume 12, Issue 5, 2012, Pages 22-29]
  • Bending moment Optimal Design of Structural Support Positions using Imperialist Competitive Algorithm and Modified Finite element [Volume 12, Issue 3, 2012, Pages 50-59]
  • Biochemical Heat Source Heat and Mass Transfer in a Porous Enclosure in the Presence of Biochemical Heat Source [Volume 12, Issue 2, 2012, Pages 144-152]
  • Biomass Heat and Mass Transfer in a Porous Enclosure in the Presence of Biochemical Heat Source [Volume 12, Issue 2, 2012, Pages 144-152]
  • Blade Loading Improvement Performance Improvement of a Centrifugal Compressor Using a Developed Inverse Design Method [Volume 12, Issue 2, 2012, Pages 109-124]
  • Blocked Channel Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
  • Boron Carbide Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
  • Breakup Length The effect of various parameters on breakup length of the outflow from the nozzle [Volume 12, Issue 2, 2012, Pages 125-133]
  • Bubble Magnetic Field effects on a Bubble Behavior in Two-Phase Flow by Using a Level Set Method [Volume 12, Issue 1, 2012, Pages 1-10]
C
  • Calibration A Novel Closed-Loop Calibration of a 5-DOF Robot Manipulator [Volume 12, Issue 1, 2012, Pages 98-105]
  • Carbon nanotube Analysis of Nonlinear Vibrations of a Carbon Nanotube Using Perturbation Technique [Volume 12, Issue 3, 2012, Pages 60-67]
  • Carbon Nanotube Modeling Interface Modeling of Nanotube Reinforced Nanocomposites by Using Multi-Scale Modeling Method [Volume 12, Issue 5, 2012, Pages 1-11]
  • Centrifugal compressor Performance Improvement of a Centrifugal Compressor Using a Developed Inverse Design Method [Volume 12, Issue 2, 2012, Pages 109-124]
  • CFD Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
  • Channel Effect of nanoparticles on mixed convection heat transfer in a horizontal channel with heat source [Volume 12, Issue 2, 2012, Pages 95-108]
  • Charpy Impact Energy ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
  • Chemical composition ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
  • Circular plate of variable thickness The Analysis of thermal buckling of circular plates of variable thickness from functionally graded materials [Volume 12, Issue 5, 2012, Pages 59-73]
  • Closed-loop Kinematics A Novel Closed-Loop Calibration of a 5-DOF Robot Manipulator [Volume 12, Issue 1, 2012, Pages 98-105]
  • Combined Cycle Two-objective optimization of using combined cycle power plants waste for heating application [Volume 12, Issue 4, 2012, Pages 120-132]
  • Composite Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
  • Compressible Numerical Simulation of droplet breakup by shock wave collision [Volume 12, Issue 1, 2012, Pages 41-49]
  • Compression refrigeration cycle Modeling and simulation of refrigeration cycle and its performance evaluation under different environment [Volume 12, Issue 1, 2012, Pages 85-97]
  • Conduction heat transfer Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
  • Constant wall temperature Joule heating effects on electroosmotic flow through a microchannel with trapezoidal cross-section [Volume 12, Issue 6, 2012, Pages 136-146]
  • Constitutive Model Constant and Variable Assuming Strain Rate Methods for Identification of Constitutive Model of Metals Using Hopkinson Pressure Bar Test [Volume 12, Issue 2, 2012, Pages 1-10]
  • Cost estimation equations Determining the estimation equations heat exchanger cost in Iran [Volume 12, Issue 1, 2012, Pages 33-40]
  • Cracked Pipe Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
  • Crankshaft Theoretical, Analytical and Experimental Analysis Of Torsional Vibration On the Vehicle Crankshaft [Volume 12, Issue 5, 2012, Pages 102-111]
  • Critical Speed Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
  • Critical velocity Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
  • Cup mean temperature The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
D
  • DBD Experimental Investigation of Geometric and Electrical Characteristics by measurements of the induced flow velocity [Volume 12, Issue 5, 2012, Pages 132-145]
  • Deformation theory A comparison between the incremental and deformation theories to analyze elastoplastic buckling of thin rectangular plates by GDQ method [Volume 12, Issue 3, 2012, Pages 11-26]
  • Depressed Center Wagon Modeling of Depressed Center Wagon and Optimization of Its Suspension for Transporting of High Weight Transformers on Straight Rail in Vertical Direction [Volume 12, Issue 2, 2012, Pages 20-29]
  • Design and Build of Biped Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains [Volume 12, Issue 6, 2012, Pages 52-68]
  • Differential transformation method Static pull-in instability analysis of beam type NEMS under molecular force using strain gradient theory [Volume 12, Issue 3, 2012, Pages 37-49]
  • Diodicity Numerical study on the effect of the number of stages on the performance of Tesla microvalve and comparison with nozzle/diffuser microvalve [Volume 12, Issue 6, 2012, Pages 124-135]
  • Direct hybrid system Performance comparison of direct and indirect hybrid systems of gas turbine and solid oxide fuel cell from thermodynamic and exergy viewpoints [Volume 12, Issue 3, 2012, Pages 117-133]
  • Dispersion force Static pull-in instability analysis of beam type NEMS under molecular force using strain gradient theory [Volume 12, Issue 3, 2012, Pages 37-49]
  • Double Glazing Analysis of Thermal Bridges’ Performance of New Windows’ Installation in the Building Envelope with External Thermal Insulation [Volume 12, Issue 3, 2012, Pages 27-36]
  • Droplet Numerical Simulation of droplet breakup by shock wave collision [Volume 12, Issue 1, 2012, Pages 41-49]
  • Drying Numerical Modeling of Shrinkage of a Ceramic Material in Drying Process [Volume 12, Issue 2, 2012, Pages 58-71]
  • Duty Cycle Effects of Duty Cycles of the Plasma Actuators on Improvement of the Pressure Distribution over NLF0414 Airfoil [Volume 12, Issue 1, 2012, Pages 106-114]
  • Duty Cycle Experimental Investigation of Geometric and Electrical Characteristics by measurements of the induced flow velocity [Volume 12, Issue 5, 2012, Pages 132-145]
  • Dynamic Stability Stability of a system consisting of three-axis connected through Hooke's joints [Volume 12, Issue 6, 2012, Pages 69-79]
E
  • Effective Elastic Properties A new model to estimate the Young's modulus of polymer concrete using micromechanical relations [Volume 12, Issue 2, 2012, Pages 153-162]
  • Elastoplastic buckling A comparison between the incremental and deformation theories to analyze elastoplastic buckling of thin rectangular plates by GDQ method [Volume 12, Issue 3, 2012, Pages 11-26]
  • Electrochemical Characteristics Analysis of Electrochemical Characteristics of a Proton Exchange Membrane Fuel Cell at the Cathode Catalyst by Lattice-Boltzmann Method [Volume 12, Issue 1, 2012, Pages 115-127]
  • Electro-osmotic flow The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
  • Electroosmotic flow Joule heating effects on electroosmotic flow through a microchannel with trapezoidal cross-section [Volume 12, Issue 6, 2012, Pages 136-146]
  • Electrostatic Actuator Modeling and Optimization of a Voltage-Induction Electrostatic Motor [Volume 12, Issue 3, 2012, Pages 134-146]
  • Elliptical vibration cutting One directional and elliptical ultrasonic vibration assisted cutting of IN738 [Volume 12, Issue 6, 2012, Pages 117-123]
  • Energy Loss Energy Loss Calculation due to Misalignment and Unbalance in Coupling-Disk System [Volume 12, Issue 3, 2012, Pages 156-162]
  • Energyplus software The best methods to optimize energy consumption for an educational building in Tabriz [Volume 12, Issue 4, 2012, Pages 91-104]
  • Equivalent inclusion method A new model to estimate the Young's modulus of polymer concrete using micromechanical relations [Volume 12, Issue 2, 2012, Pages 153-162]
  • Euler-Bernoulli theory Nonlinear Vibration Analysis of Functionally Graded Beam on Winkler-Pasternak Foundation under Mechanical and Thermal Loading Via Homotopy Analysis Method [Volume 12, Issue 5, 2012, Pages 87-101]
  • Exact solution of RTE Comparison of different radiative transfer equation approximation on modeling of porous radiant burner [Volume 12, Issue 6, 2012, Pages 30-41]
  • Excitation frequency Effects of Duty Cycles of the Plasma Actuators on Improvement of the Pressure Distribution over NLF0414 Airfoil [Volume 12, Issue 1, 2012, Pages 106-114]
  • Excitation frequency Experimental Investigation of Geometric and Electrical Characteristics by measurements of the induced flow velocity [Volume 12, Issue 5, 2012, Pages 132-145]
  • Exergy Performance comparison of direct and indirect hybrid systems of gas turbine and solid oxide fuel cell from thermodynamic and exergy viewpoints [Volume 12, Issue 3, 2012, Pages 117-133]
  • Exergy Development of new model to prediction the performance of ejector refrigeration cycle [Volume 12, Issue 4, 2012, Pages 133-146]
  • Experiment of Biped Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains [Volume 12, Issue 6, 2012, Pages 52-68]
  • Explicit Algebraic Models On Predicting the Turbulent Prandtl Number in Film Cooling Flow [Volume 12, Issue 4, 2012, Pages 69-79]
F
  • Fatigue A New Fatigue Test Specimen in order to Study of Behavior of Crack Growth in Thick-Walled Pressure Vessels [Volume 12, Issue 4, 2012, Pages 59-68]
  • Fatigue Life Numerical and experimental investigation of fatigue life and frequency response of the different arrangements of tensile-shear spot-welded joints [Volume 12, Issue 1, 2012, Pages 77-84]
  • Film Cooling On Predicting the Turbulent Prandtl Number in Film Cooling Flow [Volume 12, Issue 4, 2012, Pages 69-79]
  • Fluid Flow Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
  • Fluidic Oscillator Duct Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Derivation of Characteristic Diagram [Volume 12, Issue 5, 2012, Pages 30-42]
  • Fluids Flow Analysis of Electrochemical Characteristics of a Proton Exchange Membrane Fuel Cell at the Cathode Catalyst by Lattice-Boltzmann Method [Volume 12, Issue 1, 2012, Pages 115-127]
  • Frame Analysis of Thermal Bridges’ Performance of New Windows’ Installation in the Building Envelope with External Thermal Insulation [Volume 12, Issue 3, 2012, Pages 27-36]
  • Free Convection Heat and Mass Transfer in a Porous Enclosure in the Presence of Biochemical Heat Source [Volume 12, Issue 2, 2012, Pages 144-152]
  • Free vibration Free vibration analysis of laminated composite plate by a novel four-variable refined theory [Volume 12, Issue 6, 2012, Pages 147-158]
  • FSW Frictions stir welding of dissimilar metal Al 5050 Aluminum alloy to AISI304 stainless steel [Volume 12, Issue 6, 2012, Pages 95-103]
  • Functionally graded beam Nonlinear Vibration Analysis of Functionally Graded Beam on Winkler-Pasternak Foundation under Mechanical and Thermal Loading Via Homotopy Analysis Method [Volume 12, Issue 5, 2012, Pages 87-101]
  • Functionally Graded Materials The Analysis of thermal buckling of circular plates of variable thickness from functionally graded materials [Volume 12, Issue 5, 2012, Pages 59-73]
G
  • GDQM A comparison between the incremental and deformation theories to analyze elastoplastic buckling of thin rectangular plates by GDQ method [Volume 12, Issue 3, 2012, Pages 11-26]
  • Gibbs-Appell Application of Recursive Gibbs-Appell Formulation in Deriving the Motion Equation of Revolute-Prismatic Joints [Volume 12, Issue 3, 2012, Pages 1-10]
  • Gibbs-Appell Inverse dynamics of nonholonomic wheeled mobile robotic manipulators using recursive Gibbs-Appell formulation [Volume 12, Issue 5, 2012, Pages 12-21]
  • Glass fibres Analytical Modelling of perforation of projectiles into Glass/Epoxy Composites [Volume 12, Issue 2, 2012, Pages 11-19]
  • Godunov method Numerical Simulation of droplet breakup by shock wave collision [Volume 12, Issue 1, 2012, Pages 41-49]
  • Grain size Experimental Evaluation of Ultrasonic Stress Relieving on steel specimens considering Grain Size Effect [Volume 12, Issue 4, 2012, Pages 21-33]
  • Graphene؛nano؛young&rsquo Effective parameters in modeling of graphene sheet Young’s modulus [Volume 12, Issue 3, 2012, Pages 147-155]
H
  • Heat losses Analysis and optimization of beta-type Stirling engine taking into account the non-ideal regenerator thermal and hydraulic losses effects [Volume 12, Issue 2, 2012, Pages 45-57]
  • Heat Transfer Analysis of Electrochemical Characteristics of a Proton Exchange Membrane Fuel Cell at the Cathode Catalyst by Lattice-Boltzmann Method [Volume 12, Issue 1, 2012, Pages 115-127]
  • Heat Transfer Comparison of different radiative transfer equation approximation on modeling of porous radiant burner [Volume 12, Issue 6, 2012, Pages 30-41]
  • High Speed Craft Hydrodynamic Optimization Hull Form of High Speed Planning Craft with Variable Deadrise Angle by Using Genetic Algorithm [Volume 12, Issue 4, 2012, Pages 80-90]
  • High strain rates Constant and Variable Assuming Strain Rate Methods for Identification of Constitutive Model of Metals Using Hopkinson Pressure Bar Test [Volume 12, Issue 2, 2012, Pages 1-10]
  • Homotopy analysis method Nonlinear Vibration Analysis of Functionally Graded Beam on Winkler-Pasternak Foundation under Mechanical and Thermal Loading Via Homotopy Analysis Method [Volume 12, Issue 5, 2012, Pages 87-101]
  • Hooke’s Joint Stability of a system consisting of three-axis connected through Hooke's joints [Volume 12, Issue 6, 2012, Pages 69-79]
  • Hotpress Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
  • Hydraulic loss Analysis and optimization of beta-type Stirling engine taking into account the non-ideal regenerator thermal and hydraulic losses effects [Volume 12, Issue 2, 2012, Pages 45-57]
  • Hydrodynamic Resistance Hydrodynamic Optimization Hull Form of High Speed Planning Craft with Variable Deadrise Angle by Using Genetic Algorithm [Volume 12, Issue 4, 2012, Pages 80-90]
I
  • Immersion and Contact Testing Accurate Measurement of Mechanical properties of Tempered Microstractures of AISI D6 Alloy Steel by Ultrasonic Non Destructive Method [Volume 12, Issue 4, 2012, Pages 48-58]
  • Impact behavior Experimental Investigation of Effect of nanoclay on Ballistic Properties and Mechanical Properties of 2D Woven Glass/Epoxy Composites [Volume 12, Issue 1, 2012, Pages 11-20]
  • IN738 One directional and elliptical ultrasonic vibration assisted cutting of IN738 [Volume 12, Issue 6, 2012, Pages 117-123]
  • Incremental theory A comparison between the incremental and deformation theories to analyze elastoplastic buckling of thin rectangular plates by GDQ method [Volume 12, Issue 3, 2012, Pages 11-26]
  • Indirect hybrid system Performance comparison of direct and indirect hybrid systems of gas turbine and solid oxide fuel cell from thermodynamic and exergy viewpoints [Volume 12, Issue 3, 2012, Pages 117-133]
  • Industrial Robot A Novel Closed-Loop Calibration of a 5-DOF Robot Manipulator [Volume 12, Issue 1, 2012, Pages 98-105]
  • Internal body force driven flow Numerical Simulation of MHD Body Force Driven Flows Using Adhoc Body-Forces method [Volume 12, Issue 6, 2012, Pages 1-9]
  • Inverse Design Performance Improvement of a Centrifugal Compressor Using a Developed Inverse Design Method [Volume 12, Issue 2, 2012, Pages 109-124]
J
  • Joule heating Joule heating effects on electroosmotic flow through a microchannel with trapezoidal cross-section [Volume 12, Issue 6, 2012, Pages 136-146]
K
  • Kirchhoff–Love plate theory Thermoelastic damping in electrostatically actuated annular microplate [Volume 12, Issue 3, 2012, Pages 81-94]
  • K-ε Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Derivation of Characteristic Diagram [Volume 12, Issue 5, 2012, Pages 30-42]
L
  • Lattice Boltzmann Method The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
  • Lattice-Boltzmann Method Analysis of Electrochemical Characteristics of a Proton Exchange Membrane Fuel Cell at the Cathode Catalyst by Lattice-Boltzmann Method [Volume 12, Issue 1, 2012, Pages 115-127]
  • Layer-wise Theory Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
  • Lennard-Jones Equation Interface Modeling of Nanotube Reinforced Nanocomposites by Using Multi-Scale Modeling Method [Volume 12, Issue 5, 2012, Pages 1-11]
  • Lorentz Force Numerical Simulation of MHD Body Force Driven Flows Using Adhoc Body-Forces method [Volume 12, Issue 6, 2012, Pages 1-9]
M
  • Material Removal Rate Investigating Output Characteristics in Powder Mixed Electrical Discharge Machining of γ–TiAl Intermetallic [Volume 12, Issue 5, 2012, Pages 74-86]
  • Mechanical properties Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
  • Mechanical properties of steel Accurate Measurement of Mechanical properties of Tempered Microstractures of AISI D6 Alloy Steel by Ultrasonic Non Destructive Method [Volume 12, Issue 4, 2012, Pages 48-58]
  • Mechanical property Experimental Investigation of Effect of nanoclay on Ballistic Properties and Mechanical Properties of 2D Woven Glass/Epoxy Composites [Volume 12, Issue 1, 2012, Pages 11-20]
  • MHD micropump Numerical Simulation of MHD Body Force Driven Flows Using Adhoc Body-Forces method [Volume 12, Issue 6, 2012, Pages 1-9]
  • Microchannel The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
  • Micromechanical model A new model to estimate the Young's modulus of polymer concrete using micromechanical relations [Volume 12, Issue 2, 2012, Pages 153-162]
  • Micropump Numerical study on the effect of the number of stages on the performance of Tesla microvalve and comparison with nozzle/diffuser microvalve [Volume 12, Issue 6, 2012, Pages 124-135]
  • Mixed convection Effect of nanoparticles on mixed convection heat transfer in a horizontal channel with heat source [Volume 12, Issue 2, 2012, Pages 95-108]
  • Mobile manipulator Inverse dynamics of nonholonomic wheeled mobile robotic manipulators using recursive Gibbs-Appell formulation [Volume 12, Issue 5, 2012, Pages 12-21]
  • Modal Analysis Numerical and experimental investigation of fatigue life and frequency response of the different arrangements of tensile-shear spot-welded joints [Volume 12, Issue 1, 2012, Pages 77-84]
  • Modeling Modeling and simulation of refrigeration cycle and its performance evaluation under different environment [Volume 12, Issue 1, 2012, Pages 85-97]
  • Modeling Using perturbation method to obtain scaled numerical model for analyzing noise of supercavitation [Volume 12, Issue 5, 2012, Pages 146-153]
  • Modeling Numerical study of the importance of inter particle mass transfer resistance in the modeling of porous bed of adsorption chillers [Volume 12, Issue 6, 2012, Pages 19-29]
  • Modeling Numerical Modeling of Shrinkage of a Ceramic Material in Drying Process [Volume 12, Issue 2, 2012, Pages 58-71]
  • Modified finite element Method (MFEM) Optimal Design of Structural Support Positions using Imperialist Competitive Algorithm and Modified Finite element [Volume 12, Issue 3, 2012, Pages 50-59]
  • Monod Model Heat and Mass Transfer in a Porous Enclosure in the Presence of Biochemical Heat Source [Volume 12, Issue 2, 2012, Pages 144-152]
  • Moving Load Crack Growth Modeling for a Thin Aluminum Tube under Gaseous Detonation Loading using Cohesive Element [Volume 12, Issue 3, 2012, Pages 95-102]
N
  • Nanoclay Experimental Investigation of Effect of nanoclay on Ballistic Properties and Mechanical Properties of 2D Woven Glass/Epoxy Composites [Volume 12, Issue 1, 2012, Pages 11-20]
  • Nanocomposite Interface Modeling of Nanotube Reinforced Nanocomposites by Using Multi-Scale Modeling Method [Volume 12, Issue 5, 2012, Pages 1-11]
  • Nanofluid Effect of nanoparticles on mixed convection heat transfer in a horizontal channel with heat source [Volume 12, Issue 2, 2012, Pages 95-108]
  • Neural Network ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
  • No moving part microvalve Numerical study on the effect of the number of stages on the performance of Tesla microvalve and comparison with nozzle/diffuser microvalve [Volume 12, Issue 6, 2012, Pages 124-135]
  • Nonholonomic Inverse dynamics of nonholonomic wheeled mobile robotic manipulators using recursive Gibbs-Appell formulation [Volume 12, Issue 5, 2012, Pages 12-21]
  • Nonholonomic mobile robot Optimal path planning of nonholonomic mobile robots Using optimal control method and verification of the method via experimental tests of the Scout mobile robot [Volume 12, Issue 2, 2012, Pages 87-94]
  • Nonlinear Vibration Nonlinear Vibration Analysis of Functionally Graded Beam on Winkler-Pasternak Foundation under Mechanical and Thermal Loading Via Homotopy Analysis Method [Volume 12, Issue 5, 2012, Pages 87-101]
  • Nonlinear Vibration Analysis Analysis of Nonlinear Vibrations of a Carbon Nanotube Using Perturbation Technique [Volume 12, Issue 3, 2012, Pages 60-67]
  • Numerical method Modeling and Optimization of a Voltage-Induction Electrostatic Motor [Volume 12, Issue 3, 2012, Pages 134-146]
  • Numerical simulation Numerical Analysis of Mechanical and Thermal Stress in Thin Cylindrical Tube under Internal Gaseous Detonation [Volume 12, Issue 5, 2012, Pages 112-121]
  • Numerical solution Analytical and Numerical Calculation of Flow Permeability in a Porous Medium with Square Cross Section [Volume 12, Issue 1, 2012, Pages 21-32]
O
  • On-line monitoring Application of wavelet transform in damage identification in a thick steel beam based on ultrasonic guided wave propagation [Volume 12, Issue 5, 2012, Pages 154-164]
  • Optimal path planning Optimal path planning of nonholonomic mobile robots Using optimal control method and verification of the method via experimental tests of the Scout mobile robot [Volume 12, Issue 2, 2012, Pages 87-94]
  • Optimization Minimum Time and Minimum Switch Path Planning for a Hyper-Redundant Manipulator with Lockable Joints [Volume 12, Issue 1, 2012, Pages 50-65]
  • Optimization Hydrodynamic Optimization Hull Form of High Speed Planning Craft with Variable Deadrise Angle by Using Genetic Algorithm [Volume 12, Issue 4, 2012, Pages 80-90]
  • Optimization Two-objective optimization of using combined cycle power plants waste for heating application [Volume 12, Issue 4, 2012, Pages 120-132]
  • Optimization Optimal Design of Plate-Fin Heat Exchangers by a Bees Algorithm [Volume 12, Issue 5, 2012, Pages 22-29]
  • Optimization Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains [Volume 12, Issue 6, 2012, Pages 52-68]
  • Optimization Modeling of Depressed Center Wagon and Optimization of Its Suspension for Transporting of High Weight Transformers on Straight Rail in Vertical Direction [Volume 12, Issue 2, 2012, Pages 20-29]
  • Optimization Vibroacoustical Optimzation of Mechanical Structures Using Geometry Modification Concepte and Genetic Algorithm Method [Volume 12, Issue 2, 2012, Pages 134-143]
  • Oxygen transport Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
P
  • Parallel Misalignment Energy Loss Calculation due to Misalignment and Unbalance in Coupling-Disk System [Volume 12, Issue 3, 2012, Pages 156-162]
  • Particle Swarm Algorithm Optimal Design of Plate-Fin Heat Exchangers by a Bees Algorithm [Volume 12, Issue 5, 2012, Pages 22-29]
  • Particle Swarm Optimization Minimum Time and Minimum Switch Path Planning for a Hyper-Redundant Manipulator with Lockable Joints [Volume 12, Issue 1, 2012, Pages 50-65]
  • Passive Walking Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains [Volume 12, Issue 6, 2012, Pages 52-68]
  • PEM fuel cell Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
  • Perforation of projectile Analytical Modelling of perforation of projectiles into Glass/Epoxy Composites [Volume 12, Issue 2, 2012, Pages 11-19]
  • Perturbation Using perturbation method to obtain scaled numerical model for analyzing noise of supercavitation [Volume 12, Issue 5, 2012, Pages 146-153]
  • Pinch technology Determining the estimation equations heat exchanger cost in Iran [Volume 12, Issue 1, 2012, Pages 33-40]
  • Plasma Actuator Effects of Duty Cycles of the Plasma Actuators on Improvement of the Pressure Distribution over NLF0414 Airfoil [Volume 12, Issue 1, 2012, Pages 106-114]
  • Plasma Actuator Experimental Investigation of Geometric and Electrical Characteristics by measurements of the induced flow velocity [Volume 12, Issue 5, 2012, Pages 132-145]
  • Plasma Actuator Numerical and Experimental Investigation on the effect of a plasma actuator on NLF0414 Airfoils’ Efficiency after the Stall [Volume 12, Issue 6, 2012, Pages 104-116]
  • Plate and frame heat exchangers Determining the estimation equations heat exchanger cost in Iran [Volume 12, Issue 1, 2012, Pages 33-40]
  • Polymer concrete A new model to estimate the Young's modulus of polymer concrete using micromechanical relations [Volume 12, Issue 2, 2012, Pages 153-162]
  • Polymer-matrix composites (PMCs) Analytical Modelling of perforation of projectiles into Glass/Epoxy Composites [Volume 12, Issue 2, 2012, Pages 11-19]
  • Polymer-matrix nanocomposites (PMCs) Experimental Investigation of Effect of nanoclay on Ballistic Properties and Mechanical Properties of 2D Woven Glass/Epoxy Composites [Volume 12, Issue 1, 2012, Pages 11-20]
  • Porosity Analytical and Numerical Calculation of Flow Permeability in a Porous Medium with Square Cross Section [Volume 12, Issue 1, 2012, Pages 21-32]
  • Porosity Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
  • Porosity Investigation of Mechanical Properties and Microstructure of B4C-C Composites Fabricated by Hotpress [Volume 12, Issue 6, 2012, Pages 10-18]
  • Porous Burner Comparison of different radiative transfer equation approximation on modeling of porous radiant burner [Volume 12, Issue 6, 2012, Pages 30-41]
  • Porous layers Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
  • Porous Media Numerical study of the importance of inter particle mass transfer resistance in the modeling of porous bed of adsorption chillers [Volume 12, Issue 6, 2012, Pages 19-29]
  • Powder Mixed Electrical Discharge Machining Investigating Output Characteristics in Powder Mixed Electrical Discharge Machining of γ–TiAl Intermetallic [Volume 12, Issue 5, 2012, Pages 74-86]
  • Pressure drop Analysis of reactant transport and pressure drop in a PEM fuel cell cathode with partially blocked flow channel [Volume 12, Issue 5, 2012, Pages 43-58]
  • Pressure Sensor Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Derivation of Characteristic Diagram [Volume 12, Issue 5, 2012, Pages 30-42]
  • Proton Exchange Membrane Fuel Cell Analysis of Electrochemical Characteristics of a Proton Exchange Membrane Fuel Cell at the Cathode Catalyst by Lattice-Boltzmann Method [Volume 12, Issue 1, 2012, Pages 115-127]
  • Pull-in instability Static pull-in instability analysis of beam type NEMS under molecular force using strain gradient theory [Volume 12, Issue 3, 2012, Pages 37-49]
Q
  • Quality Factor Thermoelastic damping in electrostatically actuated annular microplate [Volume 12, Issue 3, 2012, Pages 81-94]
  • Quasi-3D Analysis Performance Improvement of a Centrifugal Compressor Using a Developed Inverse Design Method [Volume 12, Issue 2, 2012, Pages 109-124]
R
  • Radiation Comparison of different radiative transfer equation approximation on modeling of porous radiant burner [Volume 12, Issue 6, 2012, Pages 30-41]
  • Rectangular Plate Vibroacoustical Optimzation of Mechanical Structures Using Geometry Modification Concepte and Genetic Algorithm Method [Volume 12, Issue 2, 2012, Pages 134-143]
  • Rectangular Plates A comparison between the incremental and deformation theories to analyze elastoplastic buckling of thin rectangular plates by GDQ method [Volume 12, Issue 3, 2012, Pages 11-26]
  • Recursive Application of Recursive Gibbs-Appell Formulation in Deriving the Motion Equation of Revolute-Prismatic Joints [Volume 12, Issue 3, 2012, Pages 1-10]
  • Recursive Inverse dynamics of nonholonomic wheeled mobile robotic manipulators using recursive Gibbs-Appell formulation [Volume 12, Issue 5, 2012, Pages 12-21]
  • Redundant manipulators Minimum Time and Minimum Switch Path Planning for a Hyper-Redundant Manipulator with Lockable Joints [Volume 12, Issue 1, 2012, Pages 50-65]
  • Refrigeration Development of new model to prediction the performance of ejector refrigeration cycle [Volume 12, Issue 4, 2012, Pages 133-146]
  • Refrigeration Dynamic Modeling of a Solar Adsorption Refrigeration System [Volume 12, Issue 2, 2012, Pages 30-44]
  • Regenerator Analysis and optimization of beta-type Stirling engine taking into account the non-ideal regenerator thermal and hydraulic losses effects [Volume 12, Issue 2, 2012, Pages 45-57]
  • Resistance spot welding Numerical and experimental investigation of fatigue life and frequency response of the different arrangements of tensile-shear spot-welded joints [Volume 12, Issue 1, 2012, Pages 77-84]
  • Revolute-Prismatic Application of Recursive Gibbs-Appell Formulation in Deriving the Motion Equation of Revolute-Prismatic Joints [Volume 12, Issue 3, 2012, Pages 1-10]
  • Rigid Coupling Energy Loss Calculation due to Misalignment and Unbalance in Coupling-Disk System [Volume 12, Issue 3, 2012, Pages 156-162]
  • Ring and Stringer Stiffeners Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
  • Ripple Modeling and Optimization of a Voltage-Induction Electrostatic Motor [Volume 12, Issue 3, 2012, Pages 134-146]
  • Rotating Cylindrical Shell Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
S
  • Scale Analysis Analytical and Numerical Calculation of Flow Permeability in a Porous Medium with Square Cross Section [Volume 12, Issue 1, 2012, Pages 21-32]
  • Scaled Analysis Using perturbation method to obtain scaled numerical model for analyzing noise of supercavitation [Volume 12, Issue 5, 2012, Pages 146-153]
  • Second Moment Closure Models On Predicting the Turbulent Prandtl Number in Film Cooling Flow [Volume 12, Issue 4, 2012, Pages 69-79]
  • Semi elliptical crack A New Fatigue Test Specimen in order to Study of Behavior of Crack Growth in Thick-Walled Pressure Vessels [Volume 12, Issue 4, 2012, Pages 59-68]
  • Sensitivity Analysis Constant and Variable Assuming Strain Rate Methods for Identification of Constitutive Model of Metals Using Hopkinson Pressure Bar Test [Volume 12, Issue 2, 2012, Pages 1-10]
  • Separation Point Numerical and Experimental Investigation on the effect of a plasma actuator on NLF0414 Airfoils’ Efficiency after the Stall [Volume 12, Issue 6, 2012, Pages 104-116]
  • Shaft System Stability of a system consisting of three-axis connected through Hooke's joints [Volume 12, Issue 6, 2012, Pages 69-79]
  • Shell and tube heat exchangers Determining the estimation equations heat exchanger cost in Iran [Volume 12, Issue 1, 2012, Pages 33-40]
  • Shock Wave Numerical Simulation of droplet breakup by shock wave collision [Volume 12, Issue 1, 2012, Pages 41-49]
  • Silica gel Dynamic Modeling of a Solar Adsorption Refrigeration System [Volume 12, Issue 2, 2012, Pages 30-44]
  • Simulated Annealing Numerical and Experimental Study on the Effects of Expansion Ratio, Corner Fillets and Strain Rate in Warm Hydroforming of Aluminum Tubes [Volume 12, Issue 5, 2012, Pages 122-131]
  • Simultaneous Heat and Mass Transfer Numerical Modeling of Shrinkage of a Ceramic Material in Drying Process [Volume 12, Issue 2, 2012, Pages 58-71]
  • Size effect Static pull-in instability analysis of beam type NEMS under molecular force using strain gradient theory [Volume 12, Issue 3, 2012, Pages 37-49]
  • Slug flow Numerical modeling of two-phase slug flow in horizontal and inclined channels using hyperbolic two fluid model [Volume 12, Issue 4, 2012, Pages 34-47]
  • Solar Energy Dynamic Modeling of a Solar Adsorption Refrigeration System [Volume 12, Issue 2, 2012, Pages 30-44]
  • Spatial parallel robot Forward kinematic problem of two 4-RRUR with different geometric structures and one 4-RUU parallel robots [Volume 12, Issue 4, 2012, Pages 105-119]
  • SST Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Derivation of Characteristic Diagram [Volume 12, Issue 5, 2012, Pages 30-42]
  • Stability Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains [Volume 12, Issue 6, 2012, Pages 52-68]
  • Stall Angel Numerical and Experimental Investigation on the effect of a plasma actuator on NLF0414 Airfoils’ Efficiency after the Stall [Volume 12, Issue 6, 2012, Pages 104-116]
  • Strain Analysis Numerical Modeling of Shrinkage of a Ceramic Material in Drying Process [Volume 12, Issue 2, 2012, Pages 58-71]
  • Strain gradient theory Static pull-in instability analysis of beam type NEMS under molecular force using strain gradient theory [Volume 12, Issue 3, 2012, Pages 37-49]
  • Strain-life approach Numerical and experimental investigation of fatigue life and frequency response of the different arrangements of tensile-shear spot-welded joints [Volume 12, Issue 1, 2012, Pages 77-84]
  • Stress Analysis Numerical Modeling of Shrinkage of a Ceramic Material in Drying Process [Volume 12, Issue 2, 2012, Pages 58-71]
  • Stress Intensity Factor A New Fatigue Test Specimen in order to Study of Behavior of Crack Growth in Thick-Walled Pressure Vessels [Volume 12, Issue 4, 2012, Pages 59-68]
  • Stress relieving Experimental Evaluation of Ultrasonic Stress Relieving on steel specimens considering Grain Size Effect [Volume 12, Issue 4, 2012, Pages 21-33]
  • Structural Health Monitoring (SHM) Application of wavelet transform in damage identification in a thick steel beam based on ultrasonic guided wave propagation [Volume 12, Issue 5, 2012, Pages 154-164]
  • Structure Optimal Design of Structural Support Positions using Imperialist Competitive Algorithm and Modified Finite element [Volume 12, Issue 3, 2012, Pages 50-59]
  • Support Optimal Design of Structural Support Positions using Imperialist Competitive Algorithm and Modified Finite element [Volume 12, Issue 3, 2012, Pages 50-59]
  • Surface roughness Investigating Output Characteristics in Powder Mixed Electrical Discharge Machining of γ–TiAl Intermetallic [Volume 12, Issue 5, 2012, Pages 74-86]
  • Suspension Modeling of Depressed Center Wagon and Optimization of Its Suspension for Transporting of High Weight Transformers on Straight Rail in Vertical Direction [Volume 12, Issue 2, 2012, Pages 20-29]
T
  • Temperature difference between two phases Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
  • Temperature effects The analysis of thermal effects on the electro-osmotic flow in a microchannel with the Lattice Boltzmann method [Volume 12, Issue 3, 2012, Pages 68-80]
  • Thermal Bridge Analysis of Thermal Bridges’ Performance of New Windows’ Installation in the Building Envelope with External Thermal Insulation [Volume 12, Issue 3, 2012, Pages 27-36]
  • Thermal buckling The Analysis of thermal buckling of circular plates of variable thickness from functionally graded materials [Volume 12, Issue 5, 2012, Pages 59-73]
  • Thermal non-equilibrium Analytical Solution of Steady Heat Transfer in a Multi-Layer Porous Media under Local Thermal Non-Equilibrium Condition [Volume 12, Issue 4, 2012, Pages 1-8]
  • Thermal stress Numerical Analysis of Mechanical and Thermal Stress in Thin Cylindrical Tube under Internal Gaseous Detonation [Volume 12, Issue 5, 2012, Pages 112-121]
  • Thermal Transmittance Coefficient Analysis of Thermal Bridges’ Performance of New Windows’ Installation in the Building Envelope with External Thermal Insulation [Volume 12, Issue 3, 2012, Pages 27-36]
  • Thermodynamic Analysis Performance comparison of direct and indirect hybrid systems of gas turbine and solid oxide fuel cell from thermodynamic and exergy viewpoints [Volume 12, Issue 3, 2012, Pages 117-133]
  • Thermoeconomic Two-objective optimization of using combined cycle power plants waste for heating application [Volume 12, Issue 4, 2012, Pages 120-132]
  • Thick steel beam Application of wavelet transform in damage identification in a thick steel beam based on ultrasonic guided wave propagation [Volume 12, Issue 5, 2012, Pages 154-164]
  • Three-Dimensional Elasticity Theory Three-dimensional vibration analysis and critical speed of rotating orthogonally stiffened laminated cylindrical shells under axial load and pressure [Volume 12, Issue 6, 2012, Pages 80-94]
  • Three-dimensional Euclidean space Forward kinematic problem of two 4-RRUR with different geometric structures and one 4-RUU parallel robots [Volume 12, Issue 4, 2012, Pages 105-119]
  • Tool Wear Rate Investigating Output Characteristics in Powder Mixed Electrical Discharge Machining of γ–TiAl Intermetallic [Volume 12, Issue 5, 2012, Pages 74-86]
  • Torque Modeling and Optimization of a Voltage-Induction Electrostatic Motor [Volume 12, Issue 3, 2012, Pages 134-146]
  • Torsional Vibration Theoretical, Analytical and Experimental Analysis Of Torsional Vibration On the Vehicle Crankshaft [Volume 12, Issue 5, 2012, Pages 102-111]
  • Torsional Vibration Stability of a system consisting of three-axis connected through Hooke's joints [Volume 12, Issue 6, 2012, Pages 69-79]
  • Transporting of Transformers Modeling of Depressed Center Wagon and Optimization of Its Suspension for Transporting of High Weight Transformers on Straight Rail in Vertical Direction [Volume 12, Issue 2, 2012, Pages 20-29]
  • Trapezoidal microchannel Joule heating effects on electroosmotic flow through a microchannel with trapezoidal cross-section [Volume 12, Issue 6, 2012, Pages 136-146]
  • Turbulence Numerical Simulation Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Derivation of Characteristic Diagram [Volume 12, Issue 5, 2012, Pages 30-42]
  • Turbulent Prandtl Number On Predicting the Turbulent Prandtl Number in Film Cooling Flow [Volume 12, Issue 4, 2012, Pages 69-79]
  • Two-fluid model Numerical modeling of two-phase slug flow in horizontal and inclined channels using hyperbolic two fluid model [Volume 12, Issue 4, 2012, Pages 34-47]
U
  • Ultrasonic Experimental Evaluation of Ultrasonic Stress Relieving on steel specimens considering Grain Size Effect [Volume 12, Issue 4, 2012, Pages 21-33]
  • Ultrasonic guided waves Application of wavelet transform in damage identification in a thick steel beam based on ultrasonic guided wave propagation [Volume 12, Issue 5, 2012, Pages 154-164]
  • Ultrasonic Nondestructive Method Accurate Measurement of Mechanical properties of Tempered Microstractures of AISI D6 Alloy Steel by Ultrasonic Non Destructive Method [Volume 12, Issue 4, 2012, Pages 48-58]
  • Ultrasonic Vibration One directional and elliptical ultrasonic vibration assisted cutting of IN738 [Volume 12, Issue 6, 2012, Pages 117-123]
  • Uniform magnetic field Magnetic Field effects on a Bubble Behavior in Two-Phase Flow by Using a Level Set Method [Volume 12, Issue 1, 2012, Pages 1-10]
  • Uniform pressure approach Numerical study of the importance of inter particle mass transfer resistance in the modeling of porous bed of adsorption chillers [Volume 12, Issue 6, 2012, Pages 19-29]
V
  • Variable Deadrise Angle Hydrodynamic Optimization Hull Form of High Speed Planning Craft with Variable Deadrise Angle by Using Genetic Algorithm [Volume 12, Issue 4, 2012, Pages 80-90]
  • Vibration Numerical Analysis of Mechanical and Thermal Stress in Thin Cylindrical Tube under Internal Gaseous Detonation [Volume 12, Issue 5, 2012, Pages 112-121]
  • Vibration analysis Vibration Analysis of a Cracked Pipe Conveying Fluid [Volume 12, Issue 1, 2012, Pages 66-76]
  • Vibration cutting One directional and elliptical ultrasonic vibration assisted cutting of IN738 [Volume 12, Issue 6, 2012, Pages 117-123]
  • Vickers Hardness ANN model for investigation the effect of chemical composition on hardness and impact energy in API X65 microalloyed steel [Volume 12, Issue 4, 2012, Pages 156-163]
  • Volume of fluid The effect of various parameters on breakup length of the outflow from the nozzle [Volume 12, Issue 2, 2012, Pages 125-133]
W
  • Warm tube hydroforming Numerical and Experimental Study on the Effects of Expansion Ratio, Corner Fillets and Strain Rate in Warm Hydroforming of Aluminum Tubes [Volume 12, Issue 5, 2012, Pages 122-131]
  • Waste Heat Recovery Two-objective optimization of using combined cycle power plants waste for heating application [Volume 12, Issue 4, 2012, Pages 120-132]
  • Wavelet transform Application of wavelet transform in damage identification in a thick steel beam based on ultrasonic guided wave propagation [Volume 12, Issue 5, 2012, Pages 154-164]
  • Winkler-Pasternak Foundation Nonlinear Vibration Analysis of Functionally Graded Beam on Winkler-Pasternak Foundation under Mechanical and Thermal Loading Via Homotopy Analysis Method [Volume 12, Issue 5, 2012, Pages 87-101]