Modares Mechanical Engineering

Keyword Index

A

ABAQUS Investigation on parameters which affect on springback and side wall curl of U-bending of dual-phase steel plates [Volume 13, Issue 1, 2013, Pages 13-23]
Abrasive water jet cutting Modeling of abrasive water-jet cutting of glass using artificial neural network and optimization of surface roughness using firefly algorithm [Volume 13, Issue 8, 2013, Pages 123-134]
Absorption refrigeration Thermodynamic Analysis of a Tri-generation Cycle with HCCI Engine as Prime Mover [Volume 13, Issue 2, 2013, Pages 56-69]
Absorption system Energy and exergy analysis of a combined GAX- ejector absorption refrigeration cycle; specific ejector geometry [Volume 13, Issue 11, 2013, Pages 122-138]
Acicular Ferrite Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
Acoustic emission Study of Residual Tensile Strength in Drilled Composite Laminates by Acoustic Emission [Volume 13, Issue 15, 2013, Pages 169-183]
Adaptive Control Adaptive Hybrid Suppression Control of a Wheeled âMobile Robot with Flexible Solar Panels [Volume 13, Issue 5, 2013, Pages 130-143]
Adaptive Control Adaptive impedance control of exoskeleton robot [Volume 13, Issue 7, 2013, Pages 111-126]
Aerodynamic design Three-Dimensional Aerodynamic Design of a Radial Inflow Turbine Impeller by Direct Design Method [Volume 13, Issue 3, 2013, Pages 76-92]
Airbag Parametric study of automotive airbag Pyrotechnic inflator [Volume 13, Issue 3, 2013, Pages 45-56]
Airflow velocity Field study on airflow pattern through radiator of Heller dry cooling tower [Volume 13, Issue 11, 2013, Pages 30-40]
Air spring Experimental Study of the Effect of Nanoclay on Fatigue Life of Air Spring [Volume 13, Issue 2, 2013, Pages 100-108]
Al-2024 Alloy Design and optimization of Al-2024 Siemens generator fan blade forging process [Volume 13, Issue 8, 2013, Pages 108-122]
Al 6082 Study on Hot Ring Compression Test of Al 6082 alloy Using Experimental Observations and FEM Simulation [Volume 13, Issue 3, 2013, Pages 68-75]
Aluminum Analytical investigation of perforation of aluminumâfoam sandwich panels under ballistic impact [Volume 13, Issue 6, 2013, Pages 52-59]
Aluminum alloy Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminum alloy joints [Volume 13, Issue 12, 2013, Pages 56-66]
Aluminum Based Nanocomposite Prediction of hardness in Al-Al2O3 nanocomposite using artificial neural network with alternation in effective parameters of mechanical alloying method [Volume 13, Issue 13, 2013, Pages 26-32]
Aluminum Based Nanocomposite Investigation of hardness and compression behavior of Al/Short glassf nanocomposite produced by ball milling and hot pressing [Volume 13, Issue 15, 2013, Pages 50-58]
Aluminum Blade Forging Design and optimization of Al-2024 Siemens generator fan blade forging process [Volume 13, Issue 8, 2013, Pages 108-122]
Aluminum foam Experimental and numerical investigation of a blunt rigid projectile penetrating into a sandwich panel having aluminum foam core [Volume 13, Issue 5, 2013, Pages 1-13]
Aluminum foam Experimental investigation of ballistic properties of Aluminum Foam structure [Volume 13, Issue 3, 2013, Pages 22-27]
Analytical modeling Analytical modeling and finite element simulation of exponential horns with rectangular cross-section: Application on ultrasonic assisted grinding [Volume 13, Issue 14, 2013, Pages 158-195]
Analytical Solution Analytical Investigation of Asymmetric Steady Heat Conduction in a Composite Cylinder Using the Separation of Variables Method [Volume 13, Issue 5, 2013, Pages 14-26]
Analytical Solution Axisymmetric/asymmetric buckling of circular/annular nanoplate by nonlocal elasticity [Volume 13, Issue 5, 2013, Pages 144-152]
Anealing Evaluation of Annealing Process of Polycarbonate Sheet to Remove the Residual Stresses [Volume 13, Issue 6, 2013, Pages 103-113]
ANFIS controller Induction motor control using ANFIS controller and IWO optimization algorithm for using in HIL testing of turbojet FCU - [Volume 13, Issue 11, 2013, Pages 77-87]
Anisotropy Investigation of Microstructure and Anisotropy of Mechanical Properties of the ARB-Processed Commercial Purity Aluminium with Interpassing Heat Treatment [Volume 13, Issue 2, 2013, Pages 123-132]
Annular laminated plates Large deflection analysis of ring-stiffened annular laminated plates by using of dynamic relaxation method [Volume 13, Issue 12, 2013, Pages 109-123]
Anomalous Transport The solution of MHD equations using a high order characteristics-splitting scheme for MPDT simulation [Volume 13, Issue 14, 2013, Pages 28-42]
API X65 Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
API X70 Investigation of weldability in multi-pass girth welding of thermomechanical steel pipe [Volume 13, Issue 4, 2013, Pages 60-73]
API X70 pipeline steel Investigation of dynamic recrystallization in gas transportation pipeline steel of grade API X70 [Volume 13, Issue 14, 2013, Pages 150-159]
ARB Process Investigation of Microstructure and Anisotropy of Mechanical Properties of the ARB-Processed Commercial Purity Aluminium with Interpassing Heat Treatment [Volume 13, Issue 2, 2013, Pages 123-132]
Assembled Cantilever Probe Investigation of the size effect on the vibrational behavior of an AFM microcantilever with a sidewall probe, using strain gradient elasticity theory [Volume 13, Issue 13, 2013, Pages 90-99]
Asymmetric heat transfer Analytical Investigation of Asymmetric Steady Heat Conduction in a Composite Cylinder Using the Separation of Variables Method [Volume 13, Issue 5, 2013, Pages 14-26]
Asymmetric vortex Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]
Atomic force microscope Investigation of the size effect on the vibrational behavior of an AFM microcantilever with a sidewall probe, using strain gradient elasticity theory [Volume 13, Issue 13, 2013, Pages 90-99]
Attitude control Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
Attitude control Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels [Volume 13, Issue 14, 2013, Pages 210-219]
Average Nusselt number Numerical study of natural convection in a square enclosure with a central heat source filled with nanofluid and presenting correlations for Nusselt number [Volume 13, Issue 10, 2013, Pages 62-74]
Axial angle Numerical investigation of energy separation in a low pressure vortex tube under different axial angles of injection nozzles [Volume 13, Issue 7, 2013, Pages 64-73]
Axial Compressor Effect of Rotor Blade Twist on Axial Transonic Compressor Performance [Volume 13, Issue 11, 2013, Pages 154-160]

B

Ballistic behavior Effect of Nanoclay Particles on Ballistic Behavior of Glass/Epoxy Composites. Part I: Experimental Investigation [Volume 13, Issue 4, 2013, Pages 98-104]
Ballistic behavior Theoretical investigation of effect of nanoclay particles on ballistic behavior of glass/epoxy composites [Volume 13, Issue 6, 2013, Pages 30-42]
Ballistic impact Experimental and numerical investigation of a blunt rigid projectile penetrating into a sandwich panel having aluminum foam core [Volume 13, Issue 5, 2013, Pages 1-13]
Ballistic impact Experimental investigation of ballistic properties of Aluminum Foam structure [Volume 13, Issue 3, 2013, Pages 22-27]
Ball Milling Investigation of hardness and compression behavior of Al/Short glassf nanocomposite produced by ball milling and hot pressing [Volume 13, Issue 15, 2013, Pages 50-58]
Bathtub vortex Experimental and numerical study on the self-rotation in sink flow [Volume 13, Issue 6, 2013, Pages 126-139]
Bending Nonlinear bending and buckling analysis of functionally graded annular plates [Volume 13, Issue 11, 2013, Pages 1-14]
Bending modulus Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
Bias magnetic field Study on the effects of bias magnetic field and mechanical pre-stress on sensitivity and linear measurement range of Terfenol-D force sensor [Volume 13, Issue 2, 2013, Pages 46-55]
Blade Design Three-Dimensional Aerodynamic Design of a Radial Inflow Turbine Impeller by Direct Design Method [Volume 13, Issue 3, 2013, Pages 76-92]
Blade roughness Numerical analysis of blade roughness effects on gas turbine performance and flow field [Volume 13, Issue 13, 2013, Pages 112-120]
Bone Experimental Investigation of Thermal Necrosis in Conventional and High Speed Drilling of Bone [Volume 13, Issue 10, 2013, Pages 105-117]
Boundary element method Reduced-Order Modeling of Unsteady Partial Cavity Flows Using the Boundary Element Method [Volume 13, Issue 6, 2013, Pages 140-152]
Bread cooking Design, Manufacture and Testing a Solar Bread Cooker with Concentrator [Volume 13, Issue 13, 2013, Pages 1-13]
Brittle materials Improve the accuracy of fracture toughness equation coefficients resulting from irregular surface cracks generated by Vickers test of B4C-C composites [Volume 13, Issue 2, 2013, Pages 12-21]
Brownian dynamics simulation Generating initial conditions for the simulation of polymer suspensions using the equilibrium PDF [Volume 13, Issue 10, 2013, Pages 84-93]
Brown-Miller Criterion Fatigue analysis of a reinforced cylindrical shell under multi-axial loading [Volume 13, Issue 11, 2013, Pages 15-29]
Buckling Axisymmetric/asymmetric buckling of circular/annular nanoplate by nonlocal elasticity [Volume 13, Issue 5, 2013, Pages 144-152]
Buckling Exact solutions for buckling of rectangular nanoplates via nonlocal third-order plate theory [Volume 13, Issue 13, 2013, Pages 33-42]
Buckling Nonlinear bending and buckling analysis of functionally graded annular plates [Volume 13, Issue 11, 2013, Pages 1-14]
Buckling Thermal effect on the deflection, critical buckling load and vibration of nonlocal Euler-Bernoulli beam on Pasternak foundation using Ritz method [Volume 13, Issue 11, 2013, Pages 64-76]
Buckling Numerical and Experimental Investigations on Buckling of Steel Cylindrical Shells With triangular Cutout Subject to Axial Compression [Volume 13, Issue 1, 2013, Pages 24-37]
Buckling criteria Sandwich panel optimization based on yielding and buckling criteria by using imperialist competitive algorithm [Volume 13, Issue 4, 2013, Pages 25-35]
Buckling load A survey on free vibration and buckling of a beam with moderately large deflection using first order shear deformation theory [Volume 13, Issue 14, 2013, Pages 1-14]
Burning Speed Numerical simulation of combustion inside a cylindrical porous burner including turbulence effects [Volume 13, Issue 12, 2013, Pages 36-74]

C

Cable- Driven Stability measure for a parallel cable driven robot [Volume 13, Issue 10, 2013, Pages 25-34]
Cable Suspension System Elimination of Suspension Effects from Measured Modal Properties of a Flexible Structure [Volume 13, Issue 12, 2013, Pages 67-78]
Calcium carbonate nanoparticles The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
Carbon nanotube Prediction of nanocomposite effective elastic moduli by finite element modeling in micro scale [Volume 13, Issue 5, 2013, Pages 91-101]
Carbon nanotube Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
Carbon nanotubes Characterization of the electrical and electromagnetic properties of CNT-based composites [Volume 13, Issue 12, 2013, Pages 88-100]
Carbon nanotube؛Structural defect؛FEM؛young&rsquo The effects of structural defects on the mechanical properties of CNT (Revised Version) [Volume 13, Issue 13, 2013, Pages 165-175]
Cascade Reservoirs An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
Cavitator Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
Cavity Comparison of Heat Transfer in a Cavity between Vertical and Horizontal Porous Layers using LBM [Volume 13, Issue 8, 2013, Pages 93-107]
Ceiling radiant cooling Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
Central Limit Theory The study of the effect of bandwidth and loading level parameters of random load histories on the fatigue crack growth in a CT specimen by the central limit theory [Volume 13, Issue 6, 2013, Pages 20-29]
Centrifugal pump Multi Objective Optimization of the Centrifugal Oil Pump Impeller [Volume 13, Issue 11, 2013, Pages 139-149]
CFD Analysis of performance convergent nozzle ejector in the PEM system [Volume 13, Issue 8, 2013, Pages 135-150]
CFD Effect of Rotor Blade Twist on Axial Transonic Compressor Performance [Volume 13, Issue 11, 2013, Pages 154-160]
Channel Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
Chaos Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]
Chatter vibration Chatter detection in turning process using machine vision [Volume 13, Issue 10, 2013, Pages 94-104]
Chiral Angle Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
Circular Graphene Sheet Nonlinear analysis of circular graphene sheet using nonlocal continuum mechanic theory [Volume 13, Issue 13, 2013, Pages 57-66]
Ck45 steel Experimental study of ratcheting influence on fatigue life of Ck45 in uniaxial cyclic loading [Volume 13, Issue 10, 2013, Pages 75-83]
Clay The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites [Volume 13, Issue 13, 2013, Pages 157-164]
Close Modes Identification of Closely Spaced Modes Using Operational Modal Testing [Volume 13, Issue 3, 2013, Pages 102-116]
CNG cylinder An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
Cohesive zone model Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models [Volume 13, Issue 1, 2013, Pages 38-48]
Comparison with experimental results PERFORMANCE ANALYSIS OF RADIAL FLOW TURBINE OF A COOLING TURBINE USING NUMERICAL SIMULATION AND COMPARISON WITH EXPERIMENTAL RESULTS [Volume 13, Issue 14, 2013, Pages 137-149]
Complex Eigenvalue The Effects of Viscoelastic Material on Brake Squeal Considering Complex Eigenvalue Method [Volume 13, Issue 14, 2013, Pages 160-170]
Composite The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
Composite Improve the accuracy of fracture toughness equation coefficients resulting from irregular surface cracks generated by Vickers test of B4C-C composites [Volume 13, Issue 2, 2013, Pages 12-21]
Composite Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM and experiment [Volume 13, Issue 1, 2013, Pages 95-106]
Composite Materials Study of Residual Tensile Strength in Drilled Composite Laminates by Acoustic Emission [Volume 13, Issue 15, 2013, Pages 169-183]
Compressed natural gas An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
Computational fluid dynamic Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
Computational Fluid Dynamics Analysis of thermal comfort in space equipped with stratum ventilation and radiant cooling ceiling [Volume 13, Issue 11, 2013, Pages 41-54]
Concentration Impedance Fuel concentration impedance simulation of a planar Solid Oxide Fuel Cell [Volume 13, Issue 15, 2013, Pages 38-49]
Constitutive law Modeling of nonlinear elastic modulus variation during cyclic loading [Volume 13, Issue 7, 2013, Pages 10-17]
Continues maneuver Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
Continuous Cooling Transformation Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
Control Kinematic Attitude Control of Three Pairwise Connected in-Plane Masses by Varing the Lengths of the Links [Volume 13, Issue 7, 2013, Pages 127-141]
Control allocation Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
Control Strategy Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]
Conventional Drilling Experimental Investigation of Thermal Necrosis in Conventional and High Speed Drilling of Bone [Volume 13, Issue 10, 2013, Pages 105-117]
Cooling tower Verification of Pre-Cooling Effects on Saturation âEffectiveness of Evaporative Coolers [Volume 13, Issue 13, 2013, Pages 188-199]
Corner radii Accuracy of small radius corners in multi stage WEDM: Roughing parameters and geometrical analysis [Volume 13, Issue 7, 2013, Pages 87-101]
Crack Vibration analysis of rotating tapered cantilever beams and using genetic algorithms to detect cracks in these beams [Volume 13, Issue 8, 2013, Pages 1-13]
Crack arrester arrangement Analytical modeling of fracture toughness JIC of austeniticâmartensitic functionally graded steels with crack arrester layers [Volume 13, Issue 11, 2013, Pages 110-121]
Cracked Timoshenko Beam Vibration analysis of a variable cross-section cracked Timoshenko beam and their crack detection using genetic algorithm [Volume 13, Issue 13, 2013, Pages 78-89]
Creep buckling Creep buckling analysis of rectangular viscoelastic thick plate by pseudo-transient finite element method [Volume 13, Issue 13, 2013, Pages 132-142]
Critical Reynolds number Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]
Critical velocity Numerical Investigation of Two Simultaneous Fires in a Tunnel and Evaluation of the Obstructive Influence of Vehicles by Large Eddy Simulation [Volume 13, Issue 15, 2013, Pages 10-22]
Crystal plasticity Simulation the mechanical behavior of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods [Volume 13, Issue 9, 2013, Pages 138-148]
Curved boundary LBM for Modeling Cavities with Curved and Moving Boundaries [Volume 13, Issue 5, 2013, Pages 117-129]
Curved Boundary Condition A new curved boundary treatment for the lattice Boltzmann method [Volume 13, Issue 8, 2013, Pages 28-41]
Cutting and Fine Cutting Processes Numerical Simulation of Cutting and Fine Cutting Processes by Lemaitre's Ductile Damage Model in Conjunction with Large Deformation Theory [Volume 13, Issue 6, 2013, Pages 96-102]
Cyclic combined and axial loadings An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
Cylinder Control of pressure fluctuations in SPH method for simulation of flow past a cylinder [Volume 13, Issue 7, 2013, Pages 32-44]
Cylinder Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
Cylindrical shell An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
Cylindrical shells Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]

D

Damping ratio Dynamic response of laminated hybrid composite beams reinforced with high weight fraction of nano particles [Volume 13, Issue 11, 2013, Pages 150-153]
Deflection of Nonlocal Euler-Bernoulli Beam Thermal effect on the deflection, critical buckling load and vibration of nonlocal Euler-Bernoulli beam on Pasternak foundation using Ritz method [Volume 13, Issue 11, 2013, Pages 64-76]
Delamination Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models [Volume 13, Issue 1, 2013, Pages 38-48]
Delay A robust method for remote control of industrial plants [Volume 13, Issue 15, 2013, Pages 23-37]
Delayed Detached Eddy Numerical Simulation of Two-dimensional Incompressible Flow in Turbomachinary Cascades With Detached Eddy Simulation [Volume 13, Issue 13, 2013, Pages 121-131]
DES Model Evaluating DES and DDES models for wind flow over building and comparing with traditional turbulence models [Volume 13, Issue 14, 2013, Pages 81-93]
DGSCM Elastic wave propagation in composites with random distribution of spherical inclusions using Dynamic Generalized Self-Consistent Model [Volume 13, Issue 15, 2013, Pages 196-206]
Differential quadrature Analysis vibrations of two-direction functionally graded beam with integrated piezoelectric layers on resting elastic foundation using differential quadrature [Volume 13, Issue 9, 2013, Pages 58-68]
Differential Quadrature Method Thermal buckling analysis of FGM sector plates using differential quadrature method [Volume 13, Issue 2, 2013, Pages 33-45]
Differential Quadrature Method Nonlinear analysis of circular graphene sheet using nonlocal continuum mechanic theory [Volume 13, Issue 13, 2013, Pages 57-66]
Differential transform method Vibration analysis of a variable cross-section cracked Timoshenko beam and their crack detection using genetic algorithm [Volume 13, Issue 13, 2013, Pages 78-89]
Dimensional Accuracy of Corner Accuracy of small radius corners in multi stage WEDM: Roughing parameters and geometrical analysis [Volume 13, Issue 7, 2013, Pages 87-101]
Direct evaporative cooler Verification of Pre-Cooling Effects on Saturation âEffectiveness of Evaporative Coolers [Volume 13, Issue 13, 2013, Pages 188-199]
Direct Numerical Simulation DNS of turbulent drag reduction in a horizontal channel by microfibers at high Reynolds numbers using an algebraic closure model [Volume 13, Issue 3, 2013, Pages 117-127]
Discrete Ordinates Method (DOM) Study of coupled radiation and natural convection in a square porous cavity using non-equilibrium model [Volume 13, Issue 1, 2013, Pages 85-94]
Dispersion curve Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM and experiment [Volume 13, Issue 1, 2013, Pages 95-106]
Dithering technique Improving the accuracy of laser scanning using dithering technique and simultaneous laser and camera calibration [Volume 13, Issue 2, 2013, Pages 79-92]
Dithering technique Improving the accuracy of laser scanning using a soft technique [Volume 13, Issue 9, 2013, Pages 77-91]
DNS Qualitative study of interaction between the shock wave and two-dimensional turbulence flow by using ENO numerical method [Volume 13, Issue 14, 2013, Pages 171-184]
Donnell theory Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]
Double cantilever beam Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models [Volume 13, Issue 1, 2013, Pages 38-48]
Double inlet Numerical simulation of a Stirling-type double inlet pulse tube refrigerator [Volume 13, Issue 2, 2013, Pages 22-32]
DQM Nonlinear bending analysis of orthotropic nanoplates based on nonlocal model of Eringen using DQM [Volume 13, Issue 14, 2013, Pages 122-136]
Drag Application of a plasma actuator in improvement of response time of a supersonic projectile to control commands [Volume 13, Issue 4, 2013, Pages 118-124]
Drag coefficient Experimental Investigation of Airflow at Downstream of Multi Strand Cables [Volume 13, Issue 7, 2013, Pages 54-63]
Drag coefficient Numerical and Experimental Investigation of Headwind over a Passenger Train [Volume 13, Issue 13, 2013, Pages 100-111]
Drilling Study of Residual Tensile Strength in Drilled Composite Laminates by Acoustic Emission [Volume 13, Issue 15, 2013, Pages 169-183]
Driving cycle Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]
Dry cooling tower Field study on airflow pattern through radiator of Heller dry cooling tower [Volume 13, Issue 11, 2013, Pages 30-40]
Dual phase lag Analytical solution of the classical and generalized dual phase lag heat transfer equations in skin tissue under transient heating [Volume 13, Issue 13, 2013, Pages 14-25]
Ductile fracture Numerical Simulation of Cutting and Fine Cutting Processes by Lemaitre's Ductile Damage Model in Conjunction with Large Deformation Theory [Volume 13, Issue 6, 2013, Pages 96-102]
Dynamic deflection Low velocity impact on Timoshenko nanobeam using a nonlocal elasticity theory [Volume 13, Issue 8, 2013, Pages 151-160]
Dynamic Mechanical Properties Effect of nano-CaCO3 on dynamic mechanical properties of Polypropylene [Volume 13, Issue 6, 2013, Pages 1-10]
Dynamic recrystallization Investigation of dynamic recrystallization in gas transportation pipeline steel of grade API X70 [Volume 13, Issue 14, 2013, Pages 150-159]
Dynamic Relaxation Creep buckling analysis of rectangular viscoelastic thick plate by pseudo-transient finite element method [Volume 13, Issue 13, 2013, Pages 132-142]
Dynamic Relaxation Nonlinear bending and buckling analysis of functionally graded annular plates [Volume 13, Issue 11, 2013, Pages 1-14]
Dynamic Relaxation Method Large deflection analysis of ring-stiffened annular laminated plates by using of dynamic relaxation method [Volume 13, Issue 12, 2013, Pages 109-123]

E

Effective elastic moduli Prediction of nanocomposite effective elastic moduli by finite element modeling in micro scale [Volume 13, Issue 5, 2013, Pages 91-101]
Efficiency Effect of Rotor Blade Twist on Axial Transonic Compressor Performance [Volume 13, Issue 11, 2013, Pages 154-160]
EHD Experimental Investigation of Heat Transfer Enhancement using EHD in Internal Natural Convection [Volume 13, Issue 15, 2013, Pages 184-195]
Elastic Application of 3Ã3 rotational matrices in deriving the equation of motion of elastic robotic arm with revolute-prismatic joints [Volume 13, Issue 1, 2013, Pages 107-117]
Elastic body Numerical simulation of the motion and deformation of red blood cell in viscous flow [Volume 13, Issue 11, 2013, Pages 88-98]
Elasticity modulus Assessment of thermocycling effect on mechanical properties of dental nano-composite [Volume 13, Issue 3, 2013, Pages 1-9]
Elasticity solution Analysis of Free Edge Stresses in a Cross-ply Composite Plate by Applying Shooting Method [Volume 13, Issue 9, 2013, Pages 1-11]
Elastic Modulus Variation Modeling of nonlinear elastic modulus variation during cyclic loading [Volume 13, Issue 7, 2013, Pages 10-17]
Elastic-Viscoplastic behavior Micromechanical damage analysis of short fiber titanium matrix composites under combined axial loading [Volume 13, Issue 4, 2013, Pages 86-97]
Electrical discharge machining Comparative Study of the effect of ultrasonic vibration in the electrical discharge machining (EDM) [Volume 13, Issue 12, 2013, Pages 48-55]
Electricity price Thermo-economic modeling and analysis of a combined fuel cell and micro gas turbine power plant cycle [Volume 13, Issue 15, 2013, Pages 207-222]
Electrochemical Impedance Spectroscopy Fuel concentration impedance simulation of a planar Solid Oxide Fuel Cell [Volume 13, Issue 15, 2013, Pages 38-49]
Electroosmotic flow Simulation of parallel electroosmotic flows with lattice Boltzmann method [Volume 13, Issue 15, 2013, Pages 83-97]
Electroslag remelting Analytical modeling of fracture toughness JIC of austeniticâmartensitic functionally graded steels with crack arrester layers [Volume 13, Issue 11, 2013, Pages 110-121]
Enclosure Numerical study of natural convection in a square enclosure with a central heat source filled with nanofluid and presenting correlations for Nusselt number [Volume 13, Issue 10, 2013, Pages 62-74]
Energy separation Numerical investigation of energy separation in a low pressure vortex tube under different axial angles of injection nozzles [Volume 13, Issue 7, 2013, Pages 64-73]
ENO Qualitative study of interaction between the shock wave and two-dimensional turbulence flow by using ENO numerical method [Volume 13, Issue 14, 2013, Pages 171-184]
Equivalent circuit Characterization of the electrical and electromagnetic properties of CNT-based composites [Volume 13, Issue 12, 2013, Pages 88-100]
Equivalent Lay-up Prediction of Strain Energy Release Rate of Asymmetric Double Cantilever Composite Beam in Mixed-mode I/II Delamination using Equivalent Lay-up [Volume 13, Issue 13, 2013, Pages 214-225]
Equivalent stiffness Analysis of effective parameters on the buckling of grid stiffened composite shells based on first order shear deformation theory [Volume 13, Issue 10, 2013, Pages 51-61]
Error analysis Improving the accuracy of laser scanning using dithering technique and simultaneous laser and camera calibration [Volume 13, Issue 2, 2013, Pages 79-92]
Error analysis Improving the accuracy of laser scanning using a soft technique [Volume 13, Issue 9, 2013, Pages 77-91]
Euler-Bernoulli rotating beam Vibration analysis of rotating tapered cantilever beams and using genetic algorithms to detect cracks in these beams [Volume 13, Issue 8, 2013, Pages 1-13]
Evaporator's length Effects of Evaporatorâs Length on Pulsating Heat Pipesâ Thermal Performance [Volume 13, Issue 15, 2013, Pages 110-115]
Exact analytical solution Exact solutions for buckling of rectangular nanoplates via nonlocal third-order plate theory [Volume 13, Issue 13, 2013, Pages 33-42]
Exergy Thermodynamic Analysis of a Tri-generation Cycle with HCCI Engine as Prime Mover [Volume 13, Issue 2, 2013, Pages 56-69]
Exergy Energy and exergy analysis of a combined GAX- ejector absorption refrigeration cycle; specific ejector geometry [Volume 13, Issue 11, 2013, Pages 122-138]
Exoskeleton Robot Dynamic analysis and control system design for a lower extremity exoskeleton [Volume 13, Issue 5, 2013, Pages 102-116]
Exoskeleton Robot Adaptive impedance control of exoskeleton robot [Volume 13, Issue 7, 2013, Pages 111-126]
Expansion angle Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]
Experiment Prediction of Strain Energy Release Rate of Asymmetric Double Cantilever Composite Beam in Mixed-mode I/II Delamination using Equivalent Lay-up [Volume 13, Issue 13, 2013, Pages 214-225]
Experimental Characterization Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites [Volume 13, Issue 11, 2013, Pages 55-63]
Experimental investigation Numerical and Experimental Investigation of Headwind over a Passenger Train [Volume 13, Issue 13, 2013, Pages 100-111]
Experimental Study Characterization of the electrical and electromagnetic properties of CNT-based composites [Volume 13, Issue 12, 2013, Pages 88-100]
Experimental Study An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
Exponential acoustic horns with rectangular cross-section Analytical modeling and finite element simulation of exponential horns with rectangular cross-section: Application on ultrasonic assisted grinding [Volume 13, Issue 14, 2013, Pages 158-195]
Extended finite element Using XFEM for investigating the crack growth of cracked aluminum plates repaired with fiber metal laminate (FML) patches [Volume 13, Issue 14, 2013, Pages 15-27]
Extended finite element method Calculation of dynamic stress intensity factors in orthotropic media under thermal loading by XFEM [Volume 13, Issue 15, 2013, Pages 59-69]
Extended Kalman Filter Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels [Volume 13, Issue 14, 2013, Pages 210-219]

F

Fast-filling process An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
Fatigue Experimental study of ratcheting influence on fatigue life of Ck45 in uniaxial cyclic loading [Volume 13, Issue 10, 2013, Pages 75-83]
Fatigue endurance The investigation of fatigue failure of machined thin walled structures [Volume 13, Issue 6, 2013, Pages 11-19]
Fatigue Life Experimental Study of the Effect of Nanoclay on Fatigue Life of Air Spring [Volume 13, Issue 2, 2013, Pages 100-108]
FE Analysis Computation of mode I notch stress intensity factors in a V-notched TPB specimen [Volume 13, Issue 5, 2013, Pages 74-82]
FEM Analytical modeling and finite element simulation of exponential horns with rectangular cross-section: Application on ultrasonic assisted grinding [Volume 13, Issue 14, 2013, Pages 158-195]
FEOD method Computation of mode I notch stress intensity factors in a V-notched TPB specimen [Volume 13, Issue 5, 2013, Pages 74-82]
FGM Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]
FGM Thermal buckling analysis of FGM sector plates using differential quadrature method [Volume 13, Issue 2, 2013, Pages 33-45]
Fiber bridging Numerical analysis of mode I delamination growth in laminated DCB specimens using cohesive zone models [Volume 13, Issue 1, 2013, Pages 38-48]
Field measurement Field study on airflow pattern through radiator of Heller dry cooling tower [Volume 13, Issue 11, 2013, Pages 30-40]
Finite Difference Numerical analysis of the fracture parameters in the sliding contact problem between a rigid flat punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 13, Issue 12, 2013, Pages 14-24]
Finite element Optimization of loading curve in tube hydroforming process using multilevel response surface [Volume 13, Issue 13, 2013, Pages 176-187]
Finite element Simulation the mechanical behavior of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods [Volume 13, Issue 9, 2013, Pages 138-148]
Finite element analysis Investigation on the effects of welding parameters on the submerged arc welding efficiency [Volume 13, Issue 12, 2013, Pages 79-87]
Finite element analysis Numerical and Experimental Investigations on Buckling of Steel Cylindrical Shells With triangular Cutout Subject to Axial Compression [Volume 13, Issue 1, 2013, Pages 24-37]
Finite element model Calculating the Lamb wave modes in an aluminum sheet bonded to a composite layer with FEM and experiment [Volume 13, Issue 1, 2013, Pages 95-106]
Finite volume Numerical Simulation of Two-dimensional Incompressible Flow in Turbomachinary Cascades With Detached Eddy Simulation [Volume 13, Issue 13, 2013, Pages 121-131]
Finite volume method Numerical investigation of foam drilling fluid flow in the oil wells annulus [Volume 13, Issue 7, 2013, Pages 74-86]
Finite volume method Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
Fire Numerical Investigation of Two Simultaneous Fires in a Tunnel and Evaluation of the Obstructive Influence of Vehicles by Large Eddy Simulation [Volume 13, Issue 15, 2013, Pages 10-22]
Firefly algorithm Modeling of abrasive water-jet cutting of glass using artificial neural network and optimization of surface roughness using firefly algorithm [Volume 13, Issue 8, 2013, Pages 123-134]
Fire Induced Flow Evaluation of Induced-Flow in a Two-Room Compartment Fire Using Large Eddy Simulation [Volume 13, Issue 4, 2013, Pages 74-85]
Flexibility Adaptive Hybrid Suppression Control of a Wheeled âMobile Robot with Flexible Solar Panels [Volume 13, Issue 5, 2013, Pages 130-143]
Flexible Core Mechanical stabilityof sandwich curved beams with isotropic skins subjected to uniform load [Volume 13, Issue 11, 2013, Pages 99-109]
Flow behavior Experimental Investigation of the Vortex Structure on a Submersible Model [Volume 13, Issue 15, 2013, Pages 98-109]
Flow meter Design and Fabrication of a Transit Time Ultrasonic Flow Meter [Volume 13, Issue 5, 2013, Pages 153-156]
Flow reversal Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
Flow visualization Experimental Investigation of the Vortex Structure on a Submersible Model [Volume 13, Issue 15, 2013, Pages 98-109]
Flutter Jump Phenomenon and Flutter Analysis of Nonlinear Airfoil with Stochastic Approach [Volume 13, Issue 15, 2013, Pages 116-125]
FML composite patch Using XFEM for investigating the crack growth of cracked aluminum plates repaired with fiber metal laminate (FML) patches [Volume 13, Issue 14, 2013, Pages 15-27]
Foam Analytical investigation of perforation of aluminumâfoam sandwich panels under ballistic impact [Volume 13, Issue 6, 2013, Pages 52-59]
Force Sensor Study on the effects of bias magnetic field and mechanical pre-stress on sensitivity and linear measurement range of Terfenol-D force sensor [Volume 13, Issue 2, 2013, Pages 46-55]
Force Sensor Numerical and Experimental Study on Sensitivity of Static Force Sensor Using Giant Magnetostrictive Material [Volume 13, Issue 15, 2013, Pages 147-158]
Forging Forging preform optimization of turbine blade using response surface method [Volume 13, Issue 9, 2013, Pages 26-37]
Forming limit curve Multi-objective Optimization of Sheet Metal Forming Die Using FEA Coupled with RSM [Volume 13, Issue 9, 2013, Pages 47-57]
Fourier Transformation Analytical Investigation of Asymmetric Steady Heat Conduction in a Composite Cylinder Using the Separation of Variables Method [Volume 13, Issue 5, 2013, Pages 14-26]
Fracture toughness Improve the accuracy of fracture toughness equation coefficients resulting from irregular surface cracks generated by Vickers test of B4C-C composites [Volume 13, Issue 2, 2013, Pages 12-21]
Fracture toughness Analytical modeling of fracture toughness JIC of austeniticâmartensitic functionally graded steels with crack arrester layers [Volume 13, Issue 11, 2013, Pages 110-121]
Free Convection Evaluation of temperature-independent thermophysical properties assumption of water based alumina nanofluid in natural convection within the enclosures [Volume 13, Issue 8, 2013, Pages 68-78]
Free edge Analysis of Free Edge Stresses in a Cross-ply Composite Plate by Applying Shooting Method [Volume 13, Issue 9, 2013, Pages 1-11]
Free vibration Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]
Free vibrations Analysis vibrations of two-direction functionally graded beam with integrated piezoelectric layers on resting elastic foundation using differential quadrature [Volume 13, Issue 9, 2013, Pages 58-68]
Frequency Dynamic response of laminated hybrid composite beams reinforced with high weight fraction of nano particles [Volume 13, Issue 11, 2013, Pages 150-153]
Frequency Analysis A survey on free vibration and buckling of a beam with moderately large deflection using first order shear deformation theory [Volume 13, Issue 14, 2013, Pages 1-14]
Frequency Domain Decomposition Modal Parameter Identification of a Structure Subjected to Ambient Load Using Output Analysis [Volume 13, Issue 5, 2013, Pages 63-73]
Friction Study on Hot Ring Compression Test of Al 6082 alloy Using Experimental Observations and FEM Simulation [Volume 13, Issue 3, 2013, Pages 68-75]
Friction Stir Welding Comparison of Microstructure and Mechanical Properties of Aluminum Alloy Joining by Friction Stir Welding in Air and Underwater Friction Stir Welding [Volume 13, Issue 3, 2013, Pages 146-152]
Friction Stir Welding Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminum alloy joints [Volume 13, Issue 12, 2013, Pages 56-66]
FSDT Nonlinear bending analysis of orthotropic nanoplates based on nonlocal model of Eringen using DQM [Volume 13, Issue 14, 2013, Pages 122-136]
Fuel Control Unit Modeling of turbojet Fuel Control Unit using NARX-neural network [Volume 13, Issue 7, 2013, Pages 1-9]
Fuel Control Unit Induction motor control using ANFIS controller and IWO optimization algorithm for using in HIL testing of turbojet FCU - [Volume 13, Issue 11, 2013, Pages 77-87]
Fuel tank cross section Enhancing rollover threshold of fuel tanks based on designing optimization algorithm [Volume 13, Issue 1, 2013, Pages 1-12]
Functionally graded beam Analysis vibrations of two-direction functionally graded beam with integrated piezoelectric layers on resting elastic foundation using differential quadrature [Volume 13, Issue 9, 2013, Pages 58-68]
Functionally Graded Material Nonlinear bending and buckling analysis of functionally graded annular plates [Volume 13, Issue 11, 2013, Pages 1-14]
Functionally graded steels Analytical modeling of fracture toughness JIC of austeniticâmartensitic functionally graded steels with crack arrester layers [Volume 13, Issue 11, 2013, Pages 110-121]
Fuzzy Control Integrated Mechatronic Modeling and Semi-active Control of Chatter Vibration in Turning, Using MR Damper [Volume 13, Issue 7, 2013, Pages 45-53]
Fuzzy Logic Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]

G

Gas Transportation Pipeline Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
Gas Turbine Numerical analysis of blade roughness effects on gas turbine performance and flow field [Volume 13, Issue 13, 2013, Pages 112-120]
GAX cycle Energy and exergy analysis of a combined GAX- ejector absorption refrigeration cycle; specific ejector geometry [Volume 13, Issue 11, 2013, Pages 122-138]
GEO Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
Geostationary satellite Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
Geostationary satellite Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels [Volume 13, Issue 14, 2013, Pages 210-219]
Gibbs-Applle Application of 3Ã3 rotational matrices in deriving the equation of motion of elastic robotic arm with revolute-prismatic joints [Volume 13, Issue 1, 2013, Pages 107-117]
Girth Weld Investigation of weldability in multi-pass girth welding of thermomechanical steel pipe [Volume 13, Issue 4, 2013, Pages 60-73]
Godunov numerical method 2-D numerical simulation of underwater explosion near free surface of shallow water [Volume 13, Issue 5, 2013, Pages 39-48]
Graphen Nonlinear free vibration of a single layered nanoplate based on the nonlocal elasticity [Volume 13, Issue 15, 2013, Pages 223-236]
Graphene Mechanical properties of hydrogen functionalized graphene: A molecular dynamics study [Volume 13, Issue 2, 2013, Pages 93-99]
Graphene Modeling of Stiffness of Graphene/Epoxy Nanocomposites with Randomly Distributed Graphene using a Combined Molecular Dynamics Micromechanics method [Volume 13, Issue 12, 2013, Pages 25-35]
Graphene Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites [Volume 13, Issue 11, 2013, Pages 55-63]
Grid stiffened composite shells Analysis of effective parameters on the buckling of grid stiffened composite shells based on first order shear deformation theory [Volume 13, Issue 10, 2013, Pages 51-61]
Grinding Investigation of the effect of Minimum Quantity lubrication technique on performance of the grinding of HSS [Volume 13, Issue 4, 2013, Pages 1-12]
Grinding force Investigation of the effect of Minimum Quantity lubrication technique on performance of the grinding of HSS [Volume 13, Issue 4, 2013, Pages 1-12]
Gyrostat Satellite Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]

H

Hall Effect The solution of MHD equations using a high order characteristics-splitting scheme for MPDT simulation [Volume 13, Issue 14, 2013, Pages 28-42]
Hardening model Study of the Effects of Work Hardening Models on Spring-back in Cold Roll Forming of U-Channels [Volume 13, Issue 6, 2013, Pages 74-82]
Hardness Assessment of thermocycling effect on mechanical properties of dental nano-composite [Volume 13, Issue 3, 2013, Pages 1-9]
Heat Transfer Evaluation of temperature-independent thermophysical properties assumption of water based alumina nanofluid in natural convection within the enclosures [Volume 13, Issue 8, 2013, Pages 68-78]
Heat Transfer Numerical investigation of magnetic field effect on forced convection heat transfer of nanofluid in a sinusoidal channel [Volume 13, Issue 14, 2013, Pages 43-55]
Heat Transfer Thermo physical Investigation of contact between water drop and liquid methane [Volume 13, Issue 15, 2013, Pages 136-146]
Heat Transfer Enhancement Experimental Investigation of Heat Transfer Enhancement using EHD in Internal Natural Convection [Volume 13, Issue 15, 2013, Pages 184-195]
Heterodyne Design and Fabrication of a Transit Time Ultrasonic Flow Meter [Volume 13, Issue 5, 2013, Pages 153-156]
High Speed Drilling Experimental Investigation of Thermal Necrosis in Conventional and High Speed Drilling of Bone [Volume 13, Issue 10, 2013, Pages 105-117]
Homogeneous charge compression ignition Thermodynamic Analysis of a Tri-generation Cycle with HCCI Engine as Prime Mover [Volume 13, Issue 2, 2013, Pages 56-69]
Hot compression test Investigation of dynamic recrystallization in gas transportation pipeline steel of grade API X70 [Volume 13, Issue 14, 2013, Pages 150-159]
Hot deformation Investigation of dynamic recrystallization in gas transportation pipeline steel of grade API X70 [Volume 13, Issue 14, 2013, Pages 150-159]
Hot pressing Investigation of hardness and compression behavior of Al/Short glassf nanocomposite produced by ball milling and hot pressing [Volume 13, Issue 15, 2013, Pages 50-58]
Hot Working Study on Hot Ring Compression Test of Al 6082 alloy Using Experimental Observations and FEM Simulation [Volume 13, Issue 3, 2013, Pages 68-75]
Hybrid cooling Verification of Pre-Cooling Effects on Saturation âEffectiveness of Evaporative Coolers [Volume 13, Issue 13, 2013, Pages 188-199]
Hybrid Vehicle Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]
Hydrofoil Reduced-Order Modeling of Unsteady Partial Cavity Flows Using the Boundary Element Method [Volume 13, Issue 6, 2013, Pages 140-152]
Hypoelastic Model Modeling of nonlinear elastic modulus variation during cyclic loading [Volume 13, Issue 7, 2013, Pages 10-17]

I

Identification Identification of inertia tensor in a reaction wheel equipped satellite using a robust least squares method [Volume 13, Issue 4, 2013, Pages 125-138]
Image processing Chatter detection in turning process using machine vision [Volume 13, Issue 10, 2013, Pages 94-104]
Immersed Boundary Numerical simulation of the motion and deformation of red blood cell in viscous flow [Volume 13, Issue 11, 2013, Pages 88-98]
Impact Numerical and experimental analysis of penetration into Kevlar fabrics and investigation of the effective factors on the ballistic performance [Volume 13, Issue 12, 2013, Pages 124-133]
Impact behavior Effect of Nanoclay Particles on Ballistic Behavior of Glass/Epoxy Composites. Part I: Experimental Investigation [Volume 13, Issue 4, 2013, Pages 98-104]
Impact behavior Theoretical investigation of effect of nanoclay particles on ballistic behavior of glass/epoxy composites [Volume 13, Issue 6, 2013, Pages 30-42]
Impedance characteristics Dynamic Modeling of the Human Lower Limb Interacting with a Pneumatic Actuator and its Parameters Identification for Rehabilitation [Volume 13, Issue 13, 2013, Pages 200-213]
Impedance Control Dynamic analysis and control system design for a lower extremity exoskeleton [Volume 13, Issue 5, 2013, Pages 102-116]
Impedance Control Adaptive impedance control of exoskeleton robot [Volume 13, Issue 7, 2013, Pages 111-126]
Impedance Modeling Fuel concentration impedance simulation of a planar Solid Oxide Fuel Cell [Volume 13, Issue 15, 2013, Pages 38-49]
Impeller Multi Objective Optimization of the Centrifugal Oil Pump Impeller [Volume 13, Issue 11, 2013, Pages 139-149]
Imperialist Competitive Algorithm Sandwich panel optimization based on yielding and buckling criteria by using imperialist competitive algorithm [Volume 13, Issue 4, 2013, Pages 25-35]
Impingement Heat Transfer Numerical Analysis of Turbulent Flow and Heat Transfer from Pulsating Impinging Jet to Concave Surface [Volume 13, Issue 1, 2013, Pages 129-137]
Incremental sheet metal forming Two Point Incremental Forming Analysis Using Slab Analysis with Experimental Data [Volume 13, Issue 1, 2013, Pages 61-69]
Inflator Parametric study of automotive airbag Pyrotechnic inflator [Volume 13, Issue 3, 2013, Pages 45-56]
Initial conditions Generating initial conditions for the simulation of polymer suspensions using the equilibrium PDF [Volume 13, Issue 10, 2013, Pages 84-93]
Instability Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]
Interaction Numerical simulation of the motion and deformation of red blood cell in viscous flow [Volume 13, Issue 11, 2013, Pages 88-98]
Internal combustion engine Experimental and Numerical Investigations of the Effects of Two-mass Flywheel on the Reduction of the Vibrations of Power Transfer System in Vehicles [Volume 13, Issue 12, 2013, Pages 144-155]
Inverse analysis Simultaneous Estimation of Flow Rate and Location of Leakage in Natural Gas Pipeline Using Levenberg-Marquardt Method [Volume 13, Issue 4, 2013, Pages 13-24]
Isochromatic Fringe Evaluation of Annealing Process of Polycarbonate Sheet to Remove the Residual Stresses [Volume 13, Issue 6, 2013, Pages 103-113]
IWO Induction motor control using ANFIS controller and IWO optimization algorithm for using in HIL testing of turbojet FCU - [Volume 13, Issue 11, 2013, Pages 77-87]

L

Laminated plate Analysis of Free Edge Stresses in a Cross-ply Composite Plate by Applying Shooting Method [Volume 13, Issue 9, 2013, Pages 1-11]
Laminated plates Vibration of laminated composite structures integrated with magnetorheological fluid segments [Volume 13, Issue 12, 2013, Pages 156-160]
Laplace Transform Analytical solution of the classical and generalized dual phase lag heat transfer equations in skin tissue under transient heating [Volume 13, Issue 13, 2013, Pages 14-25]
Large Deformations Theory Numerical Simulation of Cutting and Fine Cutting Processes by Lemaitre's Ductile Damage Model in Conjunction with Large Deformation Theory [Volume 13, Issue 6, 2013, Pages 96-102]
Large Eddy Simulation Evaluation of Induced-Flow in a Two-Room Compartment Fire Using Large Eddy Simulation [Volume 13, Issue 4, 2013, Pages 74-85]
Large Eddy Simulation Numerical Investigation of Two Simultaneous Fires in a Tunnel and Evaluation of the Obstructive Influence of Vehicles by Large Eddy Simulation [Volume 13, Issue 15, 2013, Pages 10-22]
Laser scanning Improving the accuracy of laser scanning using dithering technique and simultaneous laser and camera calibration [Volume 13, Issue 2, 2013, Pages 79-92]
Laser scanning Improving the accuracy of laser scanning using a soft technique [Volume 13, Issue 9, 2013, Pages 77-91]
Lattice Boltzmann A new curved boundary treatment for the lattice Boltzmann method [Volume 13, Issue 8, 2013, Pages 28-41]
Lattice Boltzmann Numerical simulation of the motion and deformation of red blood cell in viscous flow [Volume 13, Issue 11, 2013, Pages 88-98]
Lattice Boltzmann Method LBM for Modeling Cavities with Curved and Moving Boundaries [Volume 13, Issue 5, 2013, Pages 117-129]
Lattice Boltzmann Method Comparison of Heat Transfer in a Cavity between Vertical and Horizontal Porous Layers using LBM [Volume 13, Issue 8, 2013, Pages 93-107]
Lattice Boltzmann Method Simulation of 2D droplet penetration in porous media using lattice Boltzmann method [Volume 13, Issue 13, 2013, Pages 43-56]
Lattice Boltzmann Method Simulation of parallel electroosmotic flows with lattice Boltzmann method [Volume 13, Issue 15, 2013, Pages 83-97]
Lattice Boltzmann Method Natural Convection in Semi-Ellipse Cavities with Variable Aspect Ratios using Lattice Boltzmann Method [Volume 13, Issue 10, 2013, Pages 1-13]
Layout Review of method for optimal layout of satellite components [Volume 13, Issue 9, 2013, Pages 126-137]
Lean Mixture The effect of different fuels (gasoline & natural gas) on cyclic variations of a spark ignition engine running on lean mixture [Volume 13, Issue 12, 2013, Pages 101-108]
Lemaitre's Ductile Damage Model Numerical Simulation of Cutting and Fine Cutting Processes by Lemaitre's Ductile Damage Model in Conjunction with Large Deformation Theory [Volume 13, Issue 6, 2013, Pages 96-102]
Lennard-Jones Molecular Dynamics Simulation of Liquid Argon Flow in Nanochannels using Different Potential Functions [Volume 13, Issue 6, 2013, Pages 114-125]
Levenberg-Marquardt Simultaneous Estimation of Flow Rate and Location of Leakage in Natural Gas Pipeline Using Levenberg-Marquardt Method [Volume 13, Issue 4, 2013, Pages 13-24]
Lift Application of a plasma actuator in improvement of response time of a supersonic projectile to control commands [Volume 13, Issue 4, 2013, Pages 118-124]
Linear Time Varying system Modal Analysis of a Beam Mass System using Time Varying Modal Analysis Methods [Volume 13, Issue 8, 2013, Pages 42-56]
Liquid Methane Thermo physical Investigation of contact between water drop and liquid methane [Volume 13, Issue 15, 2013, Pages 136-146]
Lock-in Study of effects of control cylinders usage with different arrangements on vortex-induced vibrations in Lock-in area [Volume 13, Issue 4, 2013, Pages 105-117]
Lorentz Force The solution of MHD equations using a high order characteristics-splitting scheme for MPDT simulation [Volume 13, Issue 14, 2013, Pages 28-42]
Lowest weight Sandwich panel optimization based on yielding and buckling criteria by using imperialist competitive algorithm [Volume 13, Issue 4, 2013, Pages 25-35]
LQG/LTR Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels [Volume 13, Issue 14, 2013, Pages 210-219]
L shape cavity ÙWater-Alumina natural convection heat transfer in an inclined L shape cavity [Volume 13, Issue 2, 2013, Pages 133-144]
Lyapunov exponent Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]

M

Machined part The investigation of fatigue failure of machined thin walled structures [Volume 13, Issue 6, 2013, Pages 11-19]
Machining Magnetic Abrasive Finishing of AISI 4140 steel [Volume 13, Issue 9, 2013, Pages 38-46]
Magnesium Effect of overlapping ratio and rapid cooling in friction stir process on the microstructure and mechanical properties of AZ31 alloy [Volume 13, Issue 15, 2013, Pages 126-135]
Magnetic abrasive finishing Magnetic Abrasive Finishing of AISI 4140 steel [Volume 13, Issue 9, 2013, Pages 38-46]
Magnetic Field Magnetic field effect on natural convection in a nanofluid-filled triangular enclosure [Volume 13, Issue 3, 2013, Pages 10-21]
Magnetic Field Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
Magnetic Field Numerical investigation of magnetic field effect on forced convection heat transfer of nanofluid in a sinusoidal channel [Volume 13, Issue 14, 2013, Pages 43-55]
Magnetic Hysteresis Numerical and Experimental Study on Sensitivity of Static Force Sensor Using Giant Magnetostrictive Material [Volume 13, Issue 15, 2013, Pages 147-158]
Magnetoelasticity Numerical and Experimental Study on Sensitivity of Static Force Sensor Using Giant Magnetostrictive Material [Volume 13, Issue 15, 2013, Pages 147-158]
Magnetohydrodynamic Equations The solution of MHD equations using a high order characteristics-splitting scheme for MPDT simulation [Volume 13, Issue 14, 2013, Pages 28-42]
Magnetohydrodynamics(MHD) Numerical investigation of magnetic field effect on forced convection heat transfer of nanofluid in a sinusoidal channel [Volume 13, Issue 14, 2013, Pages 43-55]
Magnetostrictive Design, Fabrication and Characterization of Resonant Torsional Magnetostrictive Transducer [Volume 13, Issue 3, 2013, Pages 128-137]
Magnetostrictive Numerical and Experimental Study on Sensitivity of Static Force Sensor Using Giant Magnetostrictive Material [Volume 13, Issue 15, 2013, Pages 147-158]
Maisotsenko cycle Modeling a novel design of multi-generation package based on the PEM fuel cell [Volume 13, Issue 14, 2013, Pages 107-121]
Mass flow rate and location of leakage estimations Simultaneous Estimation of Flow Rate and Location of Leakage in Natural Gas Pipeline Using Levenberg-Marquardt Method [Volume 13, Issue 4, 2013, Pages 13-24]
Material Removal Rate Comparative Study of the effect of ultrasonic vibration in the electrical discharge machining (EDM) [Volume 13, Issue 12, 2013, Pages 48-55]
Meanline Simulator The Novel Preliminary Design Algorithm of Multistage Axial Compressors through Two Layer Multi-Objective/Multi-Variables Optimization [Volume 13, Issue 12, 2013, Pages 1-13]
Measure Stability measure for a parallel cable driven robot [Volume 13, Issue 10, 2013, Pages 25-34]
Mechanical Alloying Prediction of hardness in Al-Al2O3 nanocomposite using artificial neural network with alternation in effective parameters of mechanical alloying method [Volume 13, Issue 13, 2013, Pages 26-32]
Mechanical pre-stress Study on the effects of bias magnetic field and mechanical pre-stress on sensitivity and linear measurement range of Terfenol-D force sensor [Volume 13, Issue 2, 2013, Pages 46-55]
Mechanical properties The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
Mechanical properties Mechanical Properties, Thermal Behavior and Water Absorption of PP/Wood Fiber/CaCO3 Nanocomposites [Volume 13, Issue 2, 2013, Pages 70-78]
Mechanical properties Mechanical properties of hydrogen functionalized graphene: A molecular dynamics study [Volume 13, Issue 2, 2013, Pages 93-99]
Mechanical properties Investigation of Microstructure and Anisotropy of Mechanical Properties of the ARB-Processed Commercial Purity Aluminium with Interpassing Heat Treatment [Volume 13, Issue 2, 2013, Pages 123-132]
Mechanical properties Investigation of hardness and compression behavior of Al/Short glassf nanocomposite produced by ball milling and hot pressing [Volume 13, Issue 15, 2013, Pages 50-58]
Mechanical property Effect of Nanoclay Particles on Ballistic Behavior of Glass/Epoxy Composites. Part I: Experimental Investigation [Volume 13, Issue 4, 2013, Pages 98-104]
Mechanical property Theoretical investigation of effect of nanoclay particles on ballistic behavior of glass/epoxy composites [Volume 13, Issue 6, 2013, Pages 30-42]
Mechanical Stability Mechanical stabilityof sandwich curved beams with isotropic skins subjected to uniform load [Volume 13, Issue 11, 2013, Pages 99-109]
Meshless Local Petrov-Galerkin (MLPG) Investigating the effect of angle between the material gradation direction and crack on mixed-mode stress intensity factor of FGM plates using MLPG method [Volume 13, Issue 1, 2013, Pages 138-150]
Metal Forming Optimization of loading curve in tube hydroforming process using multilevel response surface [Volume 13, Issue 13, 2013, Pages 176-187]
Microalloyed Steel Investigation of cooling rate on continuous cooling transformation behavior of API X65 pipeline steel [Volume 13, Issue 8, 2013, Pages 57-67]
Microchannel Effect of Viscous dissipation on gaseous flow heat transfer in a horizontal microchannel with rarefaction and axial conduction [Volume 13, Issue 6, 2013, Pages 83-95]
Micromechanics Micromechanical damage analysis of short fiber titanium matrix composites under combined axial loading [Volume 13, Issue 4, 2013, Pages 86-97]
Micromechanics Modeling of Stiffness of Graphene/Epoxy Nanocomposites with Randomly Distributed Graphene using a Combined Molecular Dynamics Micromechanics method [Volume 13, Issue 12, 2013, Pages 25-35]
Micro-Vickers Hardness Investigation of Microstructure and Anisotropy of Mechanical Properties of the ARB-Processed Commercial Purity Aluminium with Interpassing Heat Treatment [Volume 13, Issue 2, 2013, Pages 123-132]
Mindlin theory Creep buckling analysis of rectangular viscoelastic thick plate by pseudo-transient finite element method [Volume 13, Issue 13, 2013, Pages 132-142]
Mixed convection Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
Mixed-lubrication Parametric Study on the Running-In Behavior in Mixed-Lubricated Rectangular Contact [Volume 13, Issue 6, 2013, Pages 43-51]
MLPG method Vibration analysis of a FGM cylindrical shell using MLPG method [Volume 13, Issue 3, 2013, Pages 93-101]
Modal Analysis Vibration analysis of rotating tapered cantilever beams and using genetic algorithms to detect cracks in these beams [Volume 13, Issue 8, 2013, Pages 1-13]
Modal Analysis Modal Analysis of a Beam Mass System using Time Varying Modal Analysis Methods [Volume 13, Issue 8, 2013, Pages 42-56]
Modal Analysis Vibration analysis of a variable cross-section cracked Timoshenko beam and their crack detection using genetic algorithm [Volume 13, Issue 13, 2013, Pages 78-89]
Modal Parameters Modal Parameter Identification of a Structure Subjected to Ambient Load Using Output Analysis [Volume 13, Issue 5, 2013, Pages 63-73]
Modal Properties’ Correction Elimination of Suspension Effects from Measured Modal Properties of a Flexible Structure [Volume 13, Issue 12, 2013, Pages 67-78]
Modal Testing Elimination of Suspension Effects from Measured Modal Properties of a Flexible Structure [Volume 13, Issue 12, 2013, Pages 67-78]
Modeling Modeling of abrasive water-jet cutting of glass using artificial neural network and optimization of surface roughness using firefly algorithm [Volume 13, Issue 8, 2013, Pages 123-134]
Moderately large deflection A survey on free vibration and buckling of a beam with moderately large deflection using first order shear deformation theory [Volume 13, Issue 14, 2013, Pages 1-14]
Mode Shape Investigation of the accuracy of SSI-COV method in estimation of Modal Parameters: numerical and experimental case studies [Volume 13, Issue 10, 2013, Pages 127-139]
Modified couple stress theory Investigation of the size effect on the vibrational behavior of an AFM microcantilever with a sidewall probe, using strain gradient elasticity theory [Volume 13, Issue 13, 2013, Pages 90-99]
Molecular dynamic Simulation the mechanical behavior of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods [Volume 13, Issue 9, 2013, Pages 138-148]
Molecular dynamics simulation Mechanical properties of hydrogen functionalized graphene: A molecular dynamics study [Volume 13, Issue 2, 2013, Pages 93-99]
Molecular dynamics simulation Molecular Dynamics Simulation of Liquid Argon Flow in Nanochannels using Different Potential Functions [Volume 13, Issue 6, 2013, Pages 114-125]
Molecular mechanics Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
MR fluids Vibration of laminated composite structures integrated with magnetorheological fluid segments [Volume 13, Issue 12, 2013, Pages 156-160]
Multi-axial Fatigue Fatigue analysis of a reinforced cylindrical shell under multi-axial loading [Volume 13, Issue 11, 2013, Pages 15-29]
Multi Variable/Multi Variable Optimization The Novel Preliminary Design Algorithm of Multistage Axial Compressors through Two Layer Multi-Objective/Multi-Variables Optimization [Volume 13, Issue 12, 2013, Pages 1-13]

N

Nanobeam Impact of a nanoparticle on EulerâBernoulli nanobeam using a nonlocal elasticity model [Volume 13, Issue 3, 2013, Pages 37-44]
Nano Calcium Carbonate Effect of nano-CaCO3 on dynamic mechanical properties of Polypropylene [Volume 13, Issue 6, 2013, Pages 1-10]
Nanochannel Molecular Dynamics Simulation of Liquid Argon Flow in Nanochannels using Different Potential Functions [Volume 13, Issue 6, 2013, Pages 114-125]
Nanoclay Effect of Nanoclay Particles on Ballistic Behavior of Glass/Epoxy Composites. Part I: Experimental Investigation [Volume 13, Issue 4, 2013, Pages 98-104]
Nanoclay Experimental Study of the Effect of Nanoclay on Fatigue Life of Air Spring [Volume 13, Issue 2, 2013, Pages 100-108]
Nanoclay Theoretical investigation of effect of nanoclay particles on ballistic behavior of glass/epoxy composites [Volume 13, Issue 6, 2013, Pages 30-42]
Nanocomposite Prediction of nanocomposite effective elastic moduli by finite element modeling in micro scale [Volume 13, Issue 5, 2013, Pages 91-101]
Nanocomposite Experimental Study of the Effect of Nanoclay on Fatigue Life of Air Spring [Volume 13, Issue 2, 2013, Pages 100-108]
Nanocomposite Effect of nano-CaCO3 on dynamic mechanical properties of Polypropylene [Volume 13, Issue 6, 2013, Pages 1-10]
Nanocomposites The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites [Volume 13, Issue 13, 2013, Pages 157-164]
Nanocomposites Modeling of Stiffness of Graphene/Epoxy Nanocomposites with Randomly Distributed Graphene using a Combined Molecular Dynamics Micromechanics method [Volume 13, Issue 12, 2013, Pages 25-35]
Nanocomposites Characterization of the electrical and electromagnetic properties of CNT-based composites [Volume 13, Issue 12, 2013, Pages 88-100]
Nanocomposites Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites [Volume 13, Issue 11, 2013, Pages 55-63]
Nanofluid Magnetic field effect on natural convection in a nanofluid-filled triangular enclosure [Volume 13, Issue 3, 2013, Pages 10-21]
Nanofluid ÙWater-Alumina natural convection heat transfer in an inclined L shape cavity [Volume 13, Issue 2, 2013, Pages 133-144]
Nanofluid Mixed Convection Heat Transfer of Nanofluids in an Inclined Channel Under Magnetic Field [Volume 13, Issue 7, 2013, Pages 18-31]
Nanofluid Evaluation of temperature-independent thermophysical properties assumption of water based alumina nanofluid in natural convection within the enclosures [Volume 13, Issue 8, 2013, Pages 68-78]
Nanofluid Numerical investigation of magnetic field effect on forced convection heat transfer of nanofluid in a sinusoidal channel [Volume 13, Issue 14, 2013, Pages 43-55]
Nanofluid Effects of Evaporatorâs Length on Pulsating Heat Pipesâ Thermal Performance [Volume 13, Issue 15, 2013, Pages 110-115]
Nanofluid Numerical study of natural convection in a square enclosure with a central heat source filled with nanofluid and presenting correlations for Nusselt number [Volume 13, Issue 10, 2013, Pages 62-74]
Nano Particles Dynamic response of laminated hybrid composite beams reinforced with high weight fraction of nano particles [Volume 13, Issue 11, 2013, Pages 150-153]
Nanoplate Axisymmetric/asymmetric buckling of circular/annular nanoplate by nonlocal elasticity [Volume 13, Issue 5, 2013, Pages 144-152]
Nanoplate Nonlinear free vibration of a single layered nanoplate based on the nonlocal elasticity [Volume 13, Issue 15, 2013, Pages 223-236]
Nanostructure Investigation of Microstructure and Anisotropy of Mechanical Properties of the ARB-Processed Commercial Purity Aluminium with Interpassing Heat Treatment [Volume 13, Issue 2, 2013, Pages 123-132]
NARX Modeling of turbojet Fuel Control Unit using NARX-neural network [Volume 13, Issue 7, 2013, Pages 1-9]
Natural Convection Magnetic field effect on natural convection in a nanofluid-filled triangular enclosure [Volume 13, Issue 3, 2013, Pages 10-21]
Natural Convection ÙWater-Alumina natural convection heat transfer in an inclined L shape cavity [Volume 13, Issue 2, 2013, Pages 133-144]
Natural Convection Experimental Investigation of Heat Transfer Enhancement using EHD in Internal Natural Convection [Volume 13, Issue 15, 2013, Pages 184-195]
Natural Convection Study of coupled radiation and natural convection in a square porous cavity using non-equilibrium model [Volume 13, Issue 1, 2013, Pages 85-94]
Natural Convection Natural Convection in Semi-Ellipse Cavities with Variable Aspect Ratios using Lattice Boltzmann Method [Volume 13, Issue 10, 2013, Pages 1-13]
Natural Convection Numerical study of natural convection in a square enclosure with a central heat source filled with nanofluid and presenting correlations for Nusselt number [Volume 13, Issue 10, 2013, Pages 62-74]
Natural Convection Heat Transfer Comparison of Heat Transfer in a Cavity between Vertical and Horizontal Porous Layers using LBM [Volume 13, Issue 8, 2013, Pages 93-107]
Natural Convection Heat Transfer Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
Natural gas pipeline Simultaneous Estimation of Flow Rate and Location of Leakage in Natural Gas Pipeline Using Levenberg-Marquardt Method [Volume 13, Issue 4, 2013, Pages 13-24]
Natural Gas Transmission Investigation of weldability in multi-pass girth welding of thermomechanical steel pipe [Volume 13, Issue 4, 2013, Pages 60-73]
Naturally-Excitation A comparative study of turbulence models performance in predicting the frequency of naturally-excited oscillating jet flows [Volume 13, Issue 2, 2013, Pages 1-11]
Negami-Havriliak The Effects of Viscoelastic Material on Brake Squeal Considering Complex Eigenvalue Method [Volume 13, Issue 14, 2013, Pages 160-170]
Nernst–Planck equation Simulation of parallel electroosmotic flows with lattice Boltzmann method [Volume 13, Issue 15, 2013, Pages 83-97]
Networked plant input mapping A robust method for remote control of industrial plants [Volume 13, Issue 15, 2013, Pages 23-37]
Neural Network Modeling of abrasive water-jet cutting of glass using artificial neural network and optimization of surface roughness using firefly algorithm [Volume 13, Issue 8, 2013, Pages 123-134]
Newton-Euler dynamic equations Dynamic analysis and control system design for a lower extremity exoskeleton [Volume 13, Issue 5, 2013, Pages 102-116]
Newtonian and non-Newtonian fluid The effect of insert tube on hydrodynamic and thermal performance of Newtonian and non-Newtonian fluid [Volume 13, Issue 14, 2013, Pages 94-106]
NG The effect of different fuels (gasoline & natural gas) on cyclic variations of a spark ignition engine running on lean mixture [Volume 13, Issue 12, 2013, Pages 101-108]
Nonholonomic Constraint Kinematic Attitude Control of Three Pairwise Connected in-Plane Masses by Varing the Lengths of the Links [Volume 13, Issue 7, 2013, Pages 127-141]
Nonlinear airfoil Jump Phenomenon and Flutter Analysis of Nonlinear Airfoil with Stochastic Approach [Volume 13, Issue 15, 2013, Pages 116-125]
Non-linear bending Large deflection analysis of ring-stiffened annular laminated plates by using of dynamic relaxation method [Volume 13, Issue 12, 2013, Pages 109-123]
Nonlinear bending Nonlinear analysis of circular graphene sheet using nonlocal continuum mechanic theory [Volume 13, Issue 13, 2013, Pages 57-66]
Nonlinear bending Nonlinear bending analysis of orthotropic nanoplates based on nonlocal model of Eringen using DQM [Volume 13, Issue 14, 2013, Pages 122-136]
Nonlinear Unloading Behavior Modeling of nonlinear elastic modulus variation during cyclic loading [Volume 13, Issue 7, 2013, Pages 10-17]
Nonlinear vibrations Nonlinear free vibration of a single layered nanoplate based on the nonlocal elasticity [Volume 13, Issue 15, 2013, Pages 223-236]
Nonlocal Axisymmetric/asymmetric buckling of circular/annular nanoplate by nonlocal elasticity [Volume 13, Issue 5, 2013, Pages 144-152]
Nonlocal Continuum Mechanic Nonlinear analysis of circular graphene sheet using nonlocal continuum mechanic theory [Volume 13, Issue 13, 2013, Pages 57-66]
Nonlocal Effect Nonlinear bending analysis of orthotropic nanoplates based on nonlocal model of Eringen using DQM [Volume 13, Issue 14, 2013, Pages 122-136]
Nonlocal elasticity Impact of a nanoparticle on EulerâBernoulli nanobeam using a nonlocal elasticity model [Volume 13, Issue 3, 2013, Pages 37-44]
Nonlocal elasticity Exact solutions for buckling of rectangular nanoplates via nonlocal third-order plate theory [Volume 13, Issue 13, 2013, Pages 33-42]
No-slip Boundary Condition A new curved boundary treatment for the lattice Boltzmann method [Volume 13, Issue 8, 2013, Pages 28-41]
Notch shape factor Computation of mode I notch stress intensity factors in a V-notched TPB specimen [Volume 13, Issue 5, 2013, Pages 74-82]
Nozzle-Flapper set Sensitivity analysis of a sample flow control hydraulic servo valve [Volume 13, Issue 7, 2013, Pages 102-110]
Numerical Modeling The solution of MHD equations using a high order characteristics-splitting scheme for MPDT simulation [Volume 13, Issue 14, 2013, Pages 28-42]
Numerical simulation Parametric study of automotive airbag Pyrotechnic inflator [Volume 13, Issue 3, 2013, Pages 45-56]
Numerical simulation Numerical simulation of a Stirling-type double inlet pulse tube refrigerator [Volume 13, Issue 2, 2013, Pages 22-32]
Numerical simulation Numerical investigation of energy separation in a low pressure vortex tube under different axial angles of injection nozzles [Volume 13, Issue 7, 2013, Pages 64-73]
Numerical simulation Design and optimization of Al-2024 Siemens generator fan blade forging process [Volume 13, Issue 8, 2013, Pages 108-122]
Numerical simulation Numerical and Experimental Investigation of Headwind over a Passenger Train [Volume 13, Issue 13, 2013, Pages 100-111]
Numerical simulation Numerical and experimental analysis of penetration into Kevlar fabrics and investigation of the effective factors on the ballistic performance [Volume 13, Issue 12, 2013, Pages 124-133]
Numerical simulation High-speed railway vehicle lateral stability analysis in curve [Volume 13, Issue 1, 2013, Pages 118-128]
Numerical simulation Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
Numerical simulation Pore scale study on the reacting flow in porous media including flow turbulence [Volume 13, Issue 10, 2013, Pages 140-151]
Nusselt number Numerical Analysis of Turbulent Flow and Heat Transfer from Pulsating Impinging Jet to Concave Surface [Volume 13, Issue 1, 2013, Pages 129-137]

O

Object Manipulation Adaptive Hybrid Suppression Control of a Wheeled âMobile Robot with Flexible Solar Panels [Volume 13, Issue 5, 2013, Pages 130-143]
One-Equation Evaluation of Induced-Flow in a Two-Room Compartment Fire Using Large Eddy Simulation [Volume 13, Issue 4, 2013, Pages 74-85]
One-sided wind-catcher Experimental Investigation of Upstream Structures Influence on the Ventilation Performance of One-Sided Wind-Catchers [Volume 13, Issue 1, 2013, Pages 49-60]
Operational modal analysis Modal Parameter Identification of a Structure Subjected to Ambient Load Using Output Analysis [Volume 13, Issue 5, 2013, Pages 63-73]
Operational modal analysis Identification of Closely Spaced Modes Using Operational Modal Testing [Volume 13, Issue 3, 2013, Pages 102-116]
Operational modal analysis Investigation of the accuracy of SSI-COV method in estimation of Modal Parameters: numerical and experimental case studies [Volume 13, Issue 10, 2013, Pages 127-139]
Optimal Control Optimal Control of Vortex Shedding Around Square Cylinder via Reduced Order Model [Volume 13, Issue 5, 2013, Pages 49-62]
Optimal Fuel Consumption Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
Optimal Thruster Configuration Design of optimal thrusters' configuration for attitude control [Volume 13, Issue 13, 2013, Pages 67-77]
Optimization Modeling of abrasive water-jet cutting of glass using artificial neural network and optimization of surface roughness using firefly algorithm [Volume 13, Issue 8, 2013, Pages 123-134]
Optimization Optimization of loading curve in tube hydroforming process using multilevel response surface [Volume 13, Issue 13, 2013, Pages 176-187]
Optimization Two Objective Optimization of Heat Transfer Rate and Total Cost Decrement in Shell-and-Tube Heat Exchangers [Volume 13, Issue 15, 2013, Pages 159-168]
Optimization Design of A Novel Passive Pelvic Orthosis for Gait Rehabilitation Using 3D Dynamic Model [Volume 13, Issue 9, 2013, Pages 111-125]
Optimization Review of method for optimal layout of satellite components [Volume 13, Issue 9, 2013, Pages 126-137]
Orthotropic Nanoplates Nonlinear bending analysis of orthotropic nanoplates based on nonlocal model of Eringen using DQM [Volume 13, Issue 14, 2013, Pages 122-136]
Oscillating Jet A comparative study of turbulence models performance in predicting the frequency of naturally-excited oscillating jet flows [Volume 13, Issue 2, 2013, Pages 1-11]
Out-of-plane stresses Analysis of Free Edge Stresses in a Cross-ply Composite Plate by Applying Shooting Method [Volume 13, Issue 9, 2013, Pages 1-11]
Overlapping Effect of overlapping ratio and rapid cooling in friction stir process on the microstructure and mechanical properties of AZ31 alloy [Volume 13, Issue 15, 2013, Pages 126-135]

P

Pade Qualitative study of interaction between the shock wave and two-dimensional turbulence flow by using ENO numerical method [Volume 13, Issue 14, 2013, Pages 171-184]
Parallel processing Evaluating DES and DDES models for wind flow over building and comparing with traditional turbulence models [Volume 13, Issue 14, 2013, Pages 81-93]
Parallel Robot Stability measure for a parallel cable driven robot [Volume 13, Issue 10, 2013, Pages 25-34]
Parameter estimation Simultaneous Estimation of Flow Rate and Location of Leakage in Natural Gas Pipeline Using Levenberg-Marquardt Method [Volume 13, Issue 4, 2013, Pages 13-24]
Pareto Simplex Search Algorithm Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
Partial Cavity Reduced-Order Modeling of Unsteady Partial Cavity Flows Using the Boundary Element Method [Volume 13, Issue 6, 2013, Pages 140-152]
Particulate Composite Elastic wave propagation in composites with random distribution of spherical inclusions using Dynamic Generalized Self-Consistent Model [Volume 13, Issue 15, 2013, Pages 196-206]
Passive orthosis Design of A Novel Passive Pelvic Orthosis for Gait Rehabilitation Using 3D Dynamic Model [Volume 13, Issue 9, 2013, Pages 111-125]
Pasternak foundation Thermal effect on the deflection, critical buckling load and vibration of nonlocal Euler-Bernoulli beam on Pasternak foundation using Ritz method [Volume 13, Issue 11, 2013, Pages 64-76]
Pelvis Design of A Novel Passive Pelvic Orthosis for Gait Rehabilitation Using 3D Dynamic Model [Volume 13, Issue 9, 2013, Pages 111-125]
PEM fuel cell Analysis of performance convergent nozzle ejector in the PEM system [Volume 13, Issue 8, 2013, Pages 135-150]
PEM fuel cell Modeling a novel design of multi-generation package based on the PEM fuel cell [Volume 13, Issue 14, 2013, Pages 107-121]
PEM identification method Dynamic Modeling of the Human Lower Limb Interacting with a Pneumatic Actuator and its Parameters Identification for Rehabilitation [Volume 13, Issue 13, 2013, Pages 200-213]
Performance curve PERFORMANCE ANALYSIS OF RADIAL FLOW TURBINE OF A COOLING TURBINE USING NUMERICAL SIMULATION AND COMPARISON WITH EXPERIMENTAL RESULTS [Volume 13, Issue 14, 2013, Pages 137-149]
Phase transition interface Thermo physical Investigation of contact between water drop and liquid methane [Volume 13, Issue 15, 2013, Pages 136-146]
Piezoelectric Layers Analysis vibrations of two-direction functionally graded beam with integrated piezoelectric layers on resting elastic foundation using differential quadrature [Volume 13, Issue 9, 2013, Pages 58-68]
Plasma Actuator Application of a plasma actuator in improvement of response time of a supersonic projectile to control commands [Volume 13, Issue 4, 2013, Pages 118-124]
Poiseuille Flow Molecular Dynamics Simulation of Liquid Argon Flow in Nanochannels using Different Potential Functions [Volume 13, Issue 6, 2013, Pages 114-125]
Poisson equation Simulation of parallel electroosmotic flows with lattice Boltzmann method [Volume 13, Issue 15, 2013, Pages 83-97]
Pollutant Effects of configuration of stack outlets and cooling towers on flow field and plume dispersion [Volume 13, Issue 2, 2013, Pages 145-152]
Polymer-matrix nanocomposites (PMCs) Effect of Nanoclay Particles on Ballistic Behavior of Glass/Epoxy Composites. Part I: Experimental Investigation [Volume 13, Issue 4, 2013, Pages 98-104]
Polymer-matrix nanocomposites (PMCs) Theoretical investigation of effect of nanoclay particles on ballistic behavior of glass/epoxy composites [Volume 13, Issue 6, 2013, Pages 30-42]
Polypropylene The effect of stearic acid surface-modified calcium carbonate nanoparticles and PP-g-MA on the mechanical properties of PP/CaCO3/PP-g-MA nanocomposites [Volume 13, Issue 4, 2013, Pages 139-152]
Polypropylene Effect of nano-CaCO3 on dynamic mechanical properties of Polypropylene [Volume 13, Issue 6, 2013, Pages 1-10]
Polypropylene Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites [Volume 13, Issue 11, 2013, Pages 55-63]
Pore scale Pore scale study on the reacting flow in porous media including flow turbulence [Volume 13, Issue 10, 2013, Pages 140-151]
Porous Burner Numerical simulation of combustion inside a cylindrical porous burner including turbulence effects [Volume 13, Issue 12, 2013, Pages 36-74]
Porous Burner Pore scale study on the reacting flow in porous media including flow turbulence [Volume 13, Issue 10, 2013, Pages 140-151]
Porous Media Simulation of 2D droplet penetration in porous media using lattice Boltzmann method [Volume 13, Issue 13, 2013, Pages 43-56]
Porous Media Study of coupled radiation and natural convection in a square porous cavity using non-equilibrium model [Volume 13, Issue 1, 2013, Pages 85-94]
Power plant Thermo-economic modeling and analysis of a combined fuel cell and micro gas turbine power plant cycle [Volume 13, Issue 15, 2013, Pages 207-222]
PP/WF nanocomposite Mechanical Properties, Thermal Behavior and Water Absorption of PP/Wood Fiber/CaCO3 Nanocomposites [Volume 13, Issue 2, 2013, Pages 70-78]
Preform Optimization Forging preform optimization of turbine blade using response surface method [Volume 13, Issue 9, 2013, Pages 26-37]
Preliminary design The Novel Preliminary Design Algorithm of Multistage Axial Compressors through Two Layer Multi-Objective/Multi-Variables Optimization [Volume 13, Issue 12, 2013, Pages 1-13]
Pressure coefficient Numerical and Experimental Investigation of Headwind over a Passenger Train [Volume 13, Issue 13, 2013, Pages 100-111]
Prismatic core sandwich panel Sandwich panel optimization based on yielding and buckling criteria by using imperialist competitive algorithm [Volume 13, Issue 4, 2013, Pages 25-35]
Probability of Yield Random vibration of cantilever tapered beam under stochastic excitation [Volume 13, Issue 3, 2013, Pages 138-154]
Projectile Application of a plasma actuator in improvement of response time of a supersonic projectile to control commands [Volume 13, Issue 4, 2013, Pages 118-124]
Propellant Parametric study of automotive airbag Pyrotechnic inflator [Volume 13, Issue 3, 2013, Pages 45-56]
Propulsion System Design of a Fuzzy Driving Cycle Identification Unit for Intelligent Control Strategy of Hybrid Vehicles [Volume 13, Issue 12, 2013, Pages 134-143]
Pseudo Modal Parameters and State Transition matrix Modal Analysis of a Beam Mass System using Time Varying Modal Analysis Methods [Volume 13, Issue 8, 2013, Pages 42-56]
Pulsating heat pipes (PHPs) Effects of Evaporatorâs Length on Pulsating Heat Pipesâ Thermal Performance [Volume 13, Issue 15, 2013, Pages 110-115]
Pulsating jet Numerical Analysis of Turbulent Flow and Heat Transfer from Pulsating Impinging Jet to Concave Surface [Volume 13, Issue 1, 2013, Pages 129-137]
Pulse on time Comparative Study of the effect of ultrasonic vibration in the electrical discharge machining (EDM) [Volume 13, Issue 12, 2013, Pages 48-55]
Pulse tube refrigerator Numerical simulation of a Stirling-type double inlet pulse tube refrigerator [Volume 13, Issue 2, 2013, Pages 22-32]

R

Radial flow turbine PERFORMANCE ANALYSIS OF RADIAL FLOW TURBINE OF A COOLING TURBINE USING NUMERICAL SIMULATION AND COMPARISON WITH EXPERIMENTAL RESULTS [Volume 13, Issue 14, 2013, Pages 137-149]
Radial inflow turbine impeller Three-Dimensional Aerodynamic Design of a Radial Inflow Turbine Impeller by Direct Design Method [Volume 13, Issue 3, 2013, Pages 76-92]
Radiant cooling ceiling Analysis of thermal comfort in space equipped with stratum ventilation and radiant cooling ceiling [Volume 13, Issue 11, 2013, Pages 41-54]
Random distribution Elastic wave propagation in composites with random distribution of spherical inclusions using Dynamic Generalized Self-Consistent Model [Volume 13, Issue 15, 2013, Pages 196-206]
RANS-LES Models Evaluating DES and DDES models for wind flow over building and comparing with traditional turbulence models [Volume 13, Issue 14, 2013, Pages 81-93]
Ratcheting An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
Ratchetting Experimental study of ratcheting influence on fatigue life of Ck45 in uniaxial cyclic loading [Volume 13, Issue 10, 2013, Pages 75-83]
Rayleigh number ÙWater-Alumina natural convection heat transfer in an inclined L shape cavity [Volume 13, Issue 2, 2013, Pages 133-144]
Reaction Wheel Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels [Volume 13, Issue 14, 2013, Pages 210-219]
Recirculation Analysis of performance convergent nozzle ejector in the PEM system [Volume 13, Issue 8, 2013, Pages 135-150]
Recursive Application of 3Ã3 rotational matrices in deriving the equation of motion of elastic robotic arm with revolute-prismatic joints [Volume 13, Issue 1, 2013, Pages 107-117]
Reddy plate theory Exact solutions for buckling of rectangular nanoplates via nonlocal third-order plate theory [Volume 13, Issue 13, 2013, Pages 33-42]
Reduced Order Modeling Reduced-Order Modeling of Unsteady Partial Cavity Flows Using the Boundary Element Method [Volume 13, Issue 6, 2013, Pages 140-152]
Reflective surface Design, Manufacture and Testing a Solar Bread Cooker with Concentrator [Volume 13, Issue 13, 2013, Pages 1-13]
Reinforced cylindrical shells Fatigue analysis of a reinforced cylindrical shell under multi-axial loading [Volume 13, Issue 11, 2013, Pages 15-29]
Remote robust control A robust method for remote control of industrial plants [Volume 13, Issue 15, 2013, Pages 23-37]
Representative volume element Prediction of nanocomposite effective elastic moduli by finite element modeling in micro scale [Volume 13, Issue 5, 2013, Pages 91-101]
Residual material Accuracy of small radius corners in multi stage WEDM: Roughing parameters and geometrical analysis [Volume 13, Issue 7, 2013, Pages 87-101]
Residual Stress Evaluation of Annealing Process of Polycarbonate Sheet to Remove the Residual Stresses [Volume 13, Issue 6, 2013, Pages 103-113]
Response surface method Optimization of loading curve in tube hydroforming process using multilevel response surface [Volume 13, Issue 13, 2013, Pages 176-187]
Response surface method Forging preform optimization of turbine blade using response surface method [Volume 13, Issue 9, 2013, Pages 26-37]
Response surface model Multi-objective Optimization of Sheet Metal Forming Die Using FEA Coupled with RSM [Volume 13, Issue 9, 2013, Pages 47-57]
Revolute-Prismatic Application of 3Ã3 rotational matrices in deriving the equation of motion of elastic robotic arm with revolute-prismatic joints [Volume 13, Issue 1, 2013, Pages 107-117]
Ricci curvature Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]
Riemannian manifold Chaotic Dynamics of Spin-Orbit Motion in a Gyrostat Satellite Using Ricci Method [Volume 13, Issue 9, 2013, Pages 12-25]
Ring Compression Test Study on Hot Ring Compression Test of Al 6082 alloy Using Experimental Observations and FEM Simulation [Volume 13, Issue 3, 2013, Pages 68-75]
Ring stiffener Large deflection analysis of ring-stiffened annular laminated plates by using of dynamic relaxation method [Volume 13, Issue 12, 2013, Pages 109-123]
Ritz method Thermal effect on the deflection, critical buckling load and vibration of nonlocal Euler-Bernoulli beam on Pasternak foundation using Ritz method [Volume 13, Issue 11, 2013, Pages 64-76]
Ritz method Analysis of effective parameters on the buckling of grid stiffened composite shells based on first order shear deformation theory [Volume 13, Issue 10, 2013, Pages 51-61]
Rollover threshold Enhancing rollover threshold of fuel tanks based on designing optimization algorithm [Volume 13, Issue 1, 2013, Pages 1-12]
Roll stability of fuel tanker Enhancing rollover threshold of fuel tanks based on designing optimization algorithm [Volume 13, Issue 1, 2013, Pages 1-12]
Rotational speed Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminum alloy joints [Volume 13, Issue 12, 2013, Pages 56-66]
RTE Study of coupled radiation and natural convection in a square porous cavity using non-equilibrium model [Volume 13, Issue 1, 2013, Pages 85-94]

S

Sandwich Curved Beam Mechanical stabilityof sandwich curved beams with isotropic skins subjected to uniform load [Volume 13, Issue 11, 2013, Pages 99-109]
Sandwich panel Analytical investigation of perforation of aluminumâfoam sandwich panels under ballistic impact [Volume 13, Issue 6, 2013, Pages 52-59]
Sandwich structure Experimental and numerical investigation of a blunt rigid projectile penetrating into a sandwich panel having aluminum foam core [Volume 13, Issue 5, 2013, Pages 1-13]
Satellite Identification of inertia tensor in a reaction wheel equipped satellite using a robust least squares method [Volume 13, Issue 4, 2013, Pages 125-138]
Satellite Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
Satellite Review of method for optimal layout of satellite components [Volume 13, Issue 9, 2013, Pages 126-137]
Second Order Precision LBM for Modeling Cavities with Curved and Moving Boundaries [Volume 13, Issue 5, 2013, Pages 117-129]
Sector plates Thermal buckling analysis of FGM sector plates using differential quadrature method [Volume 13, Issue 2, 2013, Pages 33-45]
Self-Rotation Experimental and numerical study on the self-rotation in sink flow [Volume 13, Issue 6, 2013, Pages 126-139]
Semi ellipse cavity Natural Convection in Semi-Ellipse Cavities with Variable Aspect Ratios using Lattice Boltzmann Method [Volume 13, Issue 10, 2013, Pages 1-13]
Sensitivity Study on the effects of bias magnetic field and mechanical pre-stress on sensitivity and linear measurement range of Terfenol-D force sensor [Volume 13, Issue 2, 2013, Pages 46-55]
Sensitivity Analysis Sensitivity analysis of a sample flow control hydraulic servo valve [Volume 13, Issue 7, 2013, Pages 102-110]
Servo Hydraulic Valve Sensitivity analysis of a sample flow control hydraulic servo valve [Volume 13, Issue 7, 2013, Pages 102-110]
Shan and Chen model Simulation of 2D droplet penetration in porous media using lattice Boltzmann method [Volume 13, Issue 13, 2013, Pages 43-56]
Shape Change Kinematic Attitude Control of Three Pairwise Connected in-Plane Masses by Varing the Lengths of the Links [Volume 13, Issue 7, 2013, Pages 127-141]
Shape Memory alloy Experimental studies of training stress effect on NiTi SMA performance in higher and lower stress than training stress [Volume 13, Issue 10, 2013, Pages 14-24]
Sharp V-notch Computation of mode I notch stress intensity factors in a V-notched TPB specimen [Volume 13, Issue 5, 2013, Pages 74-82]
Shear modulus Estimation of shear and bending modulus for carbon nanotubes with chiral structures [Volume 13, Issue 14, 2013, Pages 56-67]
Sheet metal forming Study of the Effects of Work Hardening Models on Spring-back in Cold Roll Forming of U-Channels [Volume 13, Issue 6, 2013, Pages 74-82]
Sheet metal forming Multi-objective Optimization of Sheet Metal Forming Die Using FEA Coupled with RSM [Volume 13, Issue 9, 2013, Pages 47-57]
Shell-to-Solid Sub-modeling Fatigue analysis of a reinforced cylindrical shell under multi-axial loading [Volume 13, Issue 11, 2013, Pages 15-29]
Shock Wave Qualitative study of interaction between the shock wave and two-dimensional turbulence flow by using ENO numerical method [Volume 13, Issue 14, 2013, Pages 171-184]
Sink flow Experimental and numerical study on the self-rotation in sink flow [Volume 13, Issue 6, 2013, Pages 126-139]
Sinusoidal channel Numerical investigation of magnetic field effect on forced convection heat transfer of nanofluid in a sinusoidal channel [Volume 13, Issue 14, 2013, Pages 43-55]
Skin Tissue Analytical solution of the classical and generalized dual phase lag heat transfer equations in skin tissue under transient heating [Volume 13, Issue 13, 2013, Pages 14-25]
Slab Analysis Two Point Incremental Forming Analysis Using Slab Analysis with Experimental Data [Volume 13, Issue 1, 2013, Pages 61-69]
Slip flow Effect of Viscous dissipation on gaseous flow heat transfer in a horizontal microchannel with rarefaction and axial conduction [Volume 13, Issue 6, 2013, Pages 83-95]
Smagorinsky Evaluation of Induced-Flow in a Two-Room Compartment Fire Using Large Eddy Simulation [Volume 13, Issue 4, 2013, Pages 74-85]
Smeared method Analysis of effective parameters on the buckling of grid stiffened composite shells based on first order shear deformation theory [Volume 13, Issue 10, 2013, Pages 51-61]
Smoke flow visualization Experimental Investigation of Upstream Structures Influence on the Ventilation Performance of One-Sided Wind-Catchers [Volume 13, Issue 1, 2013, Pages 49-60]
Solar cooker Design, Manufacture and Testing a Solar Bread Cooker with Concentrator [Volume 13, Issue 13, 2013, Pages 1-13]
Solar Energy Design, Manufacture and Testing a Solar Bread Cooker with Concentrator [Volume 13, Issue 13, 2013, Pages 1-13]
Solid oxide fuel cell Fuel concentration impedance simulation of a planar Solid Oxide Fuel Cell [Volume 13, Issue 15, 2013, Pages 38-49]
Solid oxide fuel cell Thermo-economic modeling and analysis of a combined fuel cell and micro gas turbine power plant cycle [Volume 13, Issue 15, 2013, Pages 207-222]
Spectral Density Random vibration of cantilever tapered beam under stochastic excitation [Volume 13, Issue 3, 2013, Pages 138-154]
SPH Control of pressure fluctuations in SPH method for simulation of flow past a cylinder [Volume 13, Issue 7, 2013, Pages 32-44]
Spring-back Study of the Effects of Work Hardening Models on Spring-back in Cold Roll Forming of U-Channels [Volume 13, Issue 6, 2013, Pages 74-82]
Springback Investigation on parameters which affect on springback and side wall curl of U-bending of dual-phase steel plates [Volume 13, Issue 1, 2013, Pages 13-23]
Square Enclosure Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
Stability Integrated Mechatronic Modeling and Semi-active Control of Chatter Vibration in Turning, Using MR Damper [Volume 13, Issue 7, 2013, Pages 45-53]
Stability Stability measure for a parallel cable driven robot [Volume 13, Issue 10, 2013, Pages 25-34]
Stagger angle Effect of Rotor Blade Twist on Axial Transonic Compressor Performance [Volume 13, Issue 11, 2013, Pages 154-160]
Stainless steel 304L An experimental study on ratcheting behavior of stainless steel 304L cylindrical shells under cyclic axial and combined loadings [Volume 13, Issue 9, 2013, Pages 69-76]
Steel cylindrical shells Numerical and Experimental Investigations on Buckling of Steel Cylindrical Shells With triangular Cutout Subject to Axial Compression [Volume 13, Issue 1, 2013, Pages 24-37]
Steel Pipe Investigation of weldability in multi-pass girth welding of thermomechanical steel pipe [Volume 13, Issue 4, 2013, Pages 60-73]
Stiffness Modeling of Stiffness of Graphene/Epoxy Nanocomposites with Randomly Distributed Graphene using a Combined Molecular Dynamics Micromechanics method [Volume 13, Issue 12, 2013, Pages 25-35]
Stochastic Method Jump Phenomenon and Flutter Analysis of Nonlinear Airfoil with Stochastic Approach [Volume 13, Issue 15, 2013, Pages 116-125]
Stochastic Subspace Identification –Covariance Driven Identification of Closely Spaced Modes Using Operational Modal Testing [Volume 13, Issue 3, 2013, Pages 102-116]
Strain Energy Release Rate Prediction of Strain Energy Release Rate of Asymmetric Double Cantilever Composite Beam in Mixed-mode I/II Delamination using Equivalent Lay-up [Volume 13, Issue 13, 2013, Pages 214-225]
Strain gradient elasticity theory Investigation of the size effect on the vibrational behavior of an AFM microcantilever with a sidewall probe, using strain gradient elasticity theory [Volume 13, Issue 13, 2013, Pages 90-99]
Stratum ventilation Analysis of thermal comfort in space equipped with stratum ventilation and radiant cooling ceiling [Volume 13, Issue 11, 2013, Pages 41-54]
Stress Intensity Factor Using XFEM for investigating the crack growth of cracked aluminum plates repaired with fiber metal laminate (FML) patches [Volume 13, Issue 14, 2013, Pages 15-27]
Stress intensity factors Numerical analysis of the fracture parameters in the sliding contact problem between a rigid flat punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 13, Issue 12, 2013, Pages 14-24]
Stress Intensity Factors (SIFs) Calculation of dynamic stress intensity factors in orthotropic media under thermal loading by XFEM [Volume 13, Issue 15, 2013, Pages 59-69]
Study's parameters Forward Kinematic Investigation of Three 4-DOF Parallel Robots with Prismatic Actuators Performing 3T1R Motion Pattern in Seven-dimensional Kinematic Space [Volume 13, Issue 10, 2013, Pages 35-50]
Submerged arc welding efficiency Investigation on the effects of welding parameters on the submerged arc welding efficiency [Volume 13, Issue 12, 2013, Pages 79-87]
Submersible model Experimental Investigation of the Vortex Structure on a Submersible Model [Volume 13, Issue 15, 2013, Pages 98-109]
Suction and blowing Optimal Control of Vortex Shedding Around Square Cylinder via Reduced Order Model [Volume 13, Issue 5, 2013, Pages 49-62]
Supercavitation Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
Surface roughness The investigation of fatigue failure of machined thin walled structures [Volume 13, Issue 6, 2013, Pages 11-19]
Surface roughness Magnetic Abrasive Finishing of AISI 4140 steel [Volume 13, Issue 9, 2013, Pages 38-46]
Surface Texture Chatter detection in turning process using machine vision [Volume 13, Issue 10, 2013, Pages 94-104]
Suspension system’s Effects Elimination of Suspension Effects from Measured Modal Properties of a Flexible Structure [Volume 13, Issue 12, 2013, Pages 67-78]
Symmetric vortex Instability Investigation of Newtonian Flow in a Planar Gradual Expansion [Volume 13, Issue 3, 2013, Pages 28-36]

T

Tangent bifurcation Jump Phenomenon and Flutter Analysis of Nonlinear Airfoil with Stochastic Approach [Volume 13, Issue 15, 2013, Pages 116-125]
Tank-treading motion Numerical simulation of the motion and deformation of red blood cell in viscous flow [Volume 13, Issue 11, 2013, Pages 88-98]
Tapered beam Random vibration of cantilever tapered beam under stochastic excitation [Volume 13, Issue 3, 2013, Pages 138-154]
Temperature distribution Numerical simulation of combustion inside a cylindrical porous burner including turbulence effects [Volume 13, Issue 12, 2013, Pages 36-74]
Temperature distribution Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
Temperature jump Effect of Viscous dissipation on gaseous flow heat transfer in a horizontal microchannel with rarefaction and axial conduction [Volume 13, Issue 6, 2013, Pages 83-95]
Tensile properties Manufacturing and experimental characterization of Graphene/Polypropylene nanocomposites [Volume 13, Issue 11, 2013, Pages 55-63]
TERFENOL-D Study on the effects of bias magnetic field and mechanical pre-stress on sensitivity and linear measurement range of Terfenol-D force sensor [Volume 13, Issue 2, 2013, Pages 46-55]
TERFENOL-D Numerical and Experimental Study on Sensitivity of Static Force Sensor Using Giant Magnetostrictive Material [Volume 13, Issue 15, 2013, Pages 147-158]
Tethered Satellites Kinematic Attitude Control of Three Pairwise Connected in-Plane Masses by Varing the Lengths of the Links [Volume 13, Issue 7, 2013, Pages 127-141]
Thermal buckling Thermal buckling analysis of FGM sector plates using differential quadrature method [Volume 13, Issue 2, 2013, Pages 33-45]
Thermal Comfort Analysis of thermal comfort in space equipped with stratum ventilation and radiant cooling ceiling [Volume 13, Issue 11, 2013, Pages 41-54]
Thermal Damage Analytical solution of the classical and generalized dual phase lag heat transfer equations in skin tissue under transient heating [Volume 13, Issue 13, 2013, Pages 14-25]
Thermal loading Application of Digital Shearography for Non Destructive Testing of material with Thermal Loading [Volume 13, Issue 4, 2013, Pages 36-45]
Thermal loading Calculation of dynamic stress intensity factors in orthotropic media under thermal loading by XFEM [Volume 13, Issue 15, 2013, Pages 59-69]
Thermal Process Evaluation of Annealing Process of Polycarbonate Sheet to Remove the Residual Stresses [Volume 13, Issue 6, 2013, Pages 103-113]
Thermal Residual Stress Micromechanical damage analysis of short fiber titanium matrix composites under combined axial loading [Volume 13, Issue 4, 2013, Pages 86-97]
Thermal resistance Effects of Evaporatorâs Length on Pulsating Heat Pipesâ Thermal Performance [Volume 13, Issue 15, 2013, Pages 110-115]
Thermodynamic Analysis An investigation in the effect of natural gas composition on the filling processes of an automobile CNG cylinder in order to define the optimized conditions of the fuel transmission station [Volume 13, Issue 9, 2013, Pages 103-110]
Thermo-economic analysis Thermo-economic modeling and analysis of a combined fuel cell and micro gas turbine power plant cycle [Volume 13, Issue 15, 2013, Pages 207-222]
Thermomechanical Steel Investigation of weldability in multi-pass girth welding of thermomechanical steel pipe [Volume 13, Issue 4, 2013, Pages 60-73]
Thin walled structure The investigation of fatigue failure of machined thin walled structures [Volume 13, Issue 6, 2013, Pages 11-19]
Thomas Algorithm Analytical Investigation of Asymmetric Steady Heat Conduction in a Composite Cylinder Using the Separation of Variables Method [Volume 13, Issue 5, 2013, Pages 14-26]
Three-Dimensional Layout Review of method for optimal layout of satellite components [Volume 13, Issue 9, 2013, Pages 126-137]
Three-point bend specimen Computation of mode I notch stress intensity factors in a V-notched TPB specimen [Volume 13, Issue 5, 2013, Pages 74-82]
Thrust Force Experimental Investigation of Thermal Necrosis in Conventional and High Speed Drilling of Bone [Volume 13, Issue 10, 2013, Pages 105-117]
Ti-3Al-2.5V titanium alloy" Mechanical properties and microstructure evolution of Ti-3Al -2.5V thin sheets welded using micro-plasma arc welding process [Volume 13, Issue 14, 2013, Pages 199-209]
Timoshenko nanobeam Low velocity impact on Timoshenko nanobeam using a nonlocal elasticity theory [Volume 13, Issue 8, 2013, Pages 151-160]
Titan The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites [Volume 13, Issue 13, 2013, Pages 157-164]
Total revenue requirements Thermo-economic modeling and analysis of a combined fuel cell and micro gas turbine power plant cycle [Volume 13, Issue 15, 2013, Pages 207-222]
Tow-Way Shape Memory Effect Experimental studies of training stress effect on NiTi SMA performance in higher and lower stress than training stress [Volume 13, Issue 10, 2013, Pages 14-24]
Train Numerical and Experimental Investigation of Headwind over a Passenger Train [Volume 13, Issue 13, 2013, Pages 100-111]
Training Experimental studies of training stress effect on NiTi SMA performance in higher and lower stress than training stress [Volume 13, Issue 10, 2013, Pages 14-24]
Transient Flow Non-isothermal Transient Flow Analysis in Gas Pipelines Using a linearized Flux Splitting Numerical Scheme [Volume 13, Issue 8, 2013, Pages 14-27]
Transient Flow The influence of local polyethylene pipe in a steel pipeline system on water hammer phenomenon [Volume 13, Issue 10, 2013, Pages 118-126]
Transient Heating Analytical solution of the classical and generalized dual phase lag heat transfer equations in skin tissue under transient heating [Volume 13, Issue 13, 2013, Pages 14-25]
Transit time Design and Fabrication of a Transit Time Ultrasonic Flow Meter [Volume 13, Issue 5, 2013, Pages 153-156]
Triangular cutout Numerical and Experimental Investigations on Buckling of Steel Cylindrical Shells With triangular Cutout Subject to Axial Compression [Volume 13, Issue 1, 2013, Pages 24-37]
Triangular enclosure Magnetic field effect on natural convection in a nanofluid-filled triangular enclosure [Volume 13, Issue 3, 2013, Pages 10-21]
Tri-generation system Thermodynamic Analysis of a Tri-generation Cycle with HCCI Engine as Prime Mover [Volume 13, Issue 2, 2013, Pages 56-69]
Ttriangulation technique Improving the accuracy of laser scanning using dithering technique and simultaneous laser and camera calibration [Volume 13, Issue 2, 2013, Pages 79-92]
Ttriangulation technique Improving the accuracy of laser scanning using a soft technique [Volume 13, Issue 9, 2013, Pages 77-91]
Tube hydroforming Ultrasonic tube hydroforming, a numerical and analytical study [Volume 13, Issue 4, 2013, Pages 46-59]
Tube hydroforming Optimization of loading curve in tube hydroforming process using multilevel response surface [Volume 13, Issue 13, 2013, Pages 176-187]
Tunnel Numerical Investigation of Two Simultaneous Fires in a Tunnel and Evaluation of the Obstructive Influence of Vehicles by Large Eddy Simulation [Volume 13, Issue 15, 2013, Pages 10-22]
Turbine Numerical simulation of roughness effects on two stage turbine performance with full cooling [Volume 13, Issue 13, 2013, Pages 143-156]
Turbine Blade Forging preform optimization of turbine blade using response surface method [Volume 13, Issue 9, 2013, Pages 26-37]
Turbomachinary cascade flow Numerical Simulation of Two-dimensional Incompressible Flow in Turbomachinary Cascades With Detached Eddy Simulation [Volume 13, Issue 13, 2013, Pages 121-131]
Turbulence intensity Experimental Investigation of Airflow at Downstream of Multi Strand Cables [Volume 13, Issue 7, 2013, Pages 54-63]
Turbulent flow Qualitative study of interaction between the shock wave and two-dimensional turbulence flow by using ENO numerical method [Volume 13, Issue 14, 2013, Pages 171-184]
Turbulent flow Numerical Analysis of Turbulent Flow and Heat Transfer from Pulsating Impinging Jet to Concave Surface [Volume 13, Issue 1, 2013, Pages 129-137]
Turning Chatter detection in turning process using machine vision [Volume 13, Issue 10, 2013, Pages 94-104]
Twist extrusion Modeling and multiobjective optimization of twist extrusion process [Volume 13, Issue 6, 2013, Pages 60-73]
Two Fluid Model 2-D numerical simulation of underwater explosion near free surface of shallow water [Volume 13, Issue 5, 2013, Pages 39-48]
Two-mass Flywheel Experimental and Numerical Investigations of the Effects of Two-mass Flywheel on the Reduction of the Vibrations of Power Transfer System in Vehicles [Volume 13, Issue 12, 2013, Pages 144-155]
Two-Objective Optimization Two-objective Optimization of GEO Communication Satellite Trajectory Considering Continuous Orbital Maneuver [Volume 13, Issue 7, 2013, Pages 142-152]
Two phase flow Numerical solution of compressible, isothermal two-fluid models using path-conservative central schemes [Volume 13, Issue 1, 2013, Pages 70-84]
Two Point Forming Two Point Incremental Forming Analysis Using Slab Analysis with Experimental Data [Volume 13, Issue 1, 2013, Pages 61-69]

V

Vapor film Thermo physical Investigation of contact between water drop and liquid methane [Volume 13, Issue 15, 2013, Pages 136-146]
Velocity distribution Experimental Investigation of Airflow at Downstream of Multi Strand Cables [Volume 13, Issue 7, 2013, Pages 54-63]
Velocity distribution Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
Velocity Triangles The Novel Preliminary Design Algorithm of Multistage Axial Compressors through Two Layer Multi-Objective/Multi-Variables Optimization [Volume 13, Issue 12, 2013, Pages 1-13]
Vertical/Horizontal Porous Layer Comparison of Heat Transfer in a Cavity between Vertical and Horizontal Porous Layers using LBM [Volume 13, Issue 8, 2013, Pages 93-107]
Vibration Vibration of laminated composite structures integrated with magnetorheological fluid segments [Volume 13, Issue 12, 2013, Pages 156-160]
Vibration Thermal effect on the deflection, critical buckling load and vibration of nonlocal Euler-Bernoulli beam on Pasternak foundation using Ritz method [Volume 13, Issue 11, 2013, Pages 64-76]
Vickers Microhardness Prediction of hardness in Al-Al2O3 nanocomposite using artificial neural network with alternation in effective parameters of mechanical alloying method [Volume 13, Issue 13, 2013, Pages 26-32]
Vickers test Improve the accuracy of fracture toughness equation coefficients resulting from irregular surface cracks generated by Vickers test of B4C-C composites [Volume 13, Issue 2, 2013, Pages 12-21]
Vinyl ester The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites [Volume 13, Issue 13, 2013, Pages 157-164]
Viscoelasticity The influence of local polyethylene pipe in a steel pipeline system on water hammer phenomenon [Volume 13, Issue 10, 2013, Pages 118-126]
Viscous dissipation Effect of Viscous dissipation on gaseous flow heat transfer in a horizontal microchannel with rarefaction and axial conduction [Volume 13, Issue 6, 2013, Pages 83-95]
Visualization Field study on airflow pattern through radiator of Heller dry cooling tower [Volume 13, Issue 11, 2013, Pages 30-40]
Voronoi method Simulation the mechanical behavior of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods [Volume 13, Issue 9, 2013, Pages 138-148]
Vortex Numerical Analysis of Heat Transfer from a Hot Cylinder with Different Diameters to a Cold Square Enclosure [Volume 13, Issue 9, 2013, Pages 92-102]
Vortex-induced vibrations Study of effects of control cylinders usage with different arrangements on vortex-induced vibrations in Lock-in area [Volume 13, Issue 4, 2013, Pages 105-117]
Vortex Shedding Optimal Control of Vortex Shedding Around Square Cylinder via Reduced Order Model [Volume 13, Issue 5, 2013, Pages 49-62]
Vortex Tube Numerical investigation of energy separation in a low pressure vortex tube under different axial angles of injection nozzles [Volume 13, Issue 7, 2013, Pages 64-73]

W

Wall radiant cooling Study and Comparison of Effects of Ceiling and Wall Radiant Cooling Panels on Temperature and Velocity Distributions and Heat Transfer in a Room [Volume 13, Issue 9, 2013, Pages 149-160]
Water Absorption Mechanical Properties, Thermal Behavior and Water Absorption of PP/Wood Fiber/CaCO3 Nanocomposites [Volume 13, Issue 2, 2013, Pages 70-78]
Water drop Thermo physical Investigation of contact between water drop and liquid methane [Volume 13, Issue 15, 2013, Pages 136-146]
Water tunnel Experimental and Numerical Study of the Characteristics of Supercavities Developed behined Conical Cavitators [Volume 13, Issue 13, 2013, Pages 226-236]
Wavelet Analysis Study of Residual Tensile Strength in Drilled Composite Laminates by Acoustic Emission [Volume 13, Issue 15, 2013, Pages 169-183]
Wave propagation Elastic wave propagation in composites with random distribution of spherical inclusions using Dynamic Generalized Self-Consistent Model [Volume 13, Issue 15, 2013, Pages 196-206]
WEDM Accuracy of small radius corners in multi stage WEDM: Roughing parameters and geometrical analysis [Volume 13, Issue 7, 2013, Pages 87-101]
Welding parameters Investigation on the effects of welding parameters on the submerged arc welding efficiency [Volume 13, Issue 12, 2013, Pages 79-87]
Welding Speed Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminum alloy joints [Volume 13, Issue 12, 2013, Pages 56-66]
Wheeled mobile robot Adaptive Hybrid Suppression Control of a Wheeled âMobile Robot with Flexible Solar Panels [Volume 13, Issue 5, 2013, Pages 130-143]
Wiedemann effect Design, Fabrication and Characterization of Resonant Torsional Magnetostrictive Transducer [Volume 13, Issue 3, 2013, Pages 128-137]
Wind tunnel Experimental Investigation of the Vortex Structure on a Submersible Model [Volume 13, Issue 15, 2013, Pages 98-109]
Wire electrode Experimental Investigation of Heat Transfer Enhancement using EHD in Internal Natural Convection [Volume 13, Issue 15, 2013, Pages 184-195]
Wireless networks A robust method for remote control of industrial plants [Volume 13, Issue 15, 2013, Pages 23-37]

Modares Mechanical Engineering

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

R

S

T

U

V

W

Y