Modares Mechanical Engineering

Modares Mechanical Engineering

Keyword Index
A
  • Air Gap Experimental and Numerical Analysis to Evaluate the Effect of Different Parameters on Active Magnetic Bearing System [Volume 10, Issue 1, 2010, Pages 51-62]
  • ANOVA Theoretical and Experimental Study of the Effects of Process Parameters on Bending Angle in Laser Bending process [Volume 10, Issue 3, 2010, Pages 67-86]
  • ASTM-D 6751 Standard Effect of Waste Oil Methyl Ester on Tractor Engine Performance [Volume 10, Issue 2, 2010, Pages 89-99]
  • Automatic Dynamic Balancer Design and Manufacturing of a Single Plane Automatic Dynamic Balancer [Volume 10, Issue 1, 2010, Pages 29-49]
B
C
  • Cavity Flow On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
  • Cleavage Fracture An Investigation on Mechanical Properties of 42CrMo4 Steel with Tempered Martensite and Ferrite-Bainite-Martensite Microstructure [Volume 10, Issue 1, 2010, Pages 63-76]
  • Cloud Point Data A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
  • Collision-Free Conditions Optimal Trajectory Planning and Obstacle Avoidance of a Manipulator in the Presence of Ellipsoidal Obstacles Using Genetic Algorithms [Volume 10, Issue 4, 2010, Pages 75-84]
  • Column Flotation Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
  • Column Flotation Scale up Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
  • Comfortable Zone Determining Thermal Comfort Period for Tabriz [Volume 10, Issue 4, 2010, Pages 37-44]
  • Compact Finite Difference Direct Numerical Simulation of 2D Forced Jet using the Compact Finite Difference Method [Volume 10, Issue 3, 2010, Pages 9-20]
  • Conduction Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
  • Conjugate Convection Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
  • Cutting Dynamic Simulation Cutting dynamic simulation of Low Immersion End Milling Operation: Effect of cutting depth and feed rate [Volume 10, Issue 2, 2010, Pages 19-30]
  • Cylindrical Hot Film Sensor Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
D
  • Die-roll Study in Effect of different parameters in Fine-Blanking process with FEM and Its Formulation Based on Artificial Neural Networks [Volume 10, Issue 1, 2010, Pages 15-27]
  • Diesel fuel Effect of Waste Oil Methyl Ester on Tractor Engine Performance [Volume 10, Issue 2, 2010, Pages 89-99]
  • Double bulge tube hydroforming Experimental and numerical investigation of double bulge tube hydroforming [Volume 10, Issue 3, 2010, Pages 1-9]
  • DSC Thermal Properties and the high Throughput of Extruded WPC [Volume 10, Issue 4, 2010, Pages 45-53]
  • Dynamic SGS Model Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Dynamic Stability Analysis Design and Manufacturing of a Single Plane Automatic Dynamic Balancer [Volume 10, Issue 1, 2010, Pages 29-49]
E
  • Environmental conditions Determining Thermal Comfort Period for Tabriz [Volume 10, Issue 4, 2010, Pages 37-44]
  • Excitation Pattern Experimental and Numerical Analysis to Evaluate the Effect of Different Parameters on Active Magnetic Bearing System [Volume 10, Issue 1, 2010, Pages 51-62]
  • Explosive Manufacturing of Bimetal Tubes Made of st-37 and Phosphor-Bronze Using Explosive Welding [Volume 10, Issue 2, 2010, Pages 1-17]
  • Explosive velocity Manufacturing of Bimetal Tubes Made of st-37 and Phosphor-Bronze Using Explosive Welding [Volume 10, Issue 2, 2010, Pages 1-17]
  • Explosive Welding Manufacturing of Bimetal Tubes Made of st-37 and Phosphor-Bronze Using Explosive Welding [Volume 10, Issue 2, 2010, Pages 1-17]
F
  • FGM General Solution of Plane Elasticity of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 3, 2010, Pages 31-43]
  • FGM General Solution of Shear Deformation of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 4, 2010, Pages 13-26]
  • Filter Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Filtering On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
  • Fine-Blanking Study in Effect of different parameters in Fine-Blanking process with FEM and Its Formulation Based on Artificial Neural Networks [Volume 10, Issue 1, 2010, Pages 15-27]
  • Flotation Kinetic Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
  • Flotation Modeling Determination of design parameters and pre-study of column flotation design for the Koushk lead and zinc plant using flotation test [Volume 10, Issue 1, 2010, Pages 1-14]
  • Folding Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell Square Column under Axial Loading [Volume 10, Issue 3, 2010, Pages 21-30]
  • Forced Shear Layer Numerical simulation of velocity field of two dimensional forced shear layer using the vortex element method [Volume 10, Issue 1, 2010, Pages 91-101]
  • Friction coefficient Experimental and numerical investigation of double bulge tube hydroforming [Volume 10, Issue 3, 2010, Pages 1-9]
  • Fuzzy Mutation Rate Optimal Trajectory Planning and Obstacle Avoidance of a Manipulator in the Presence of Ellipsoidal Obstacles Using Genetic Algorithms [Volume 10, Issue 4, 2010, Pages 75-84]
G
  • Gas-lubrication Investigation of Tilt Angle Effects for GAS-Lubricated Noncircular Journal Bearing Systems [Volume 10, Issue 2, 2010, Pages 69-78]
H
  • Heat Treatment Effect of Composition on the Precipitation of  in Rapidly Quenched Ni-Al Binary Alloys [Volume 10, Issue 1, 2010, Pages 103-109]
  • High Througput Thermal Properties and the high Throughput of Extruded WPC [Volume 10, Issue 4, 2010, Pages 45-53]
  • Hot wire anemometer Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
  • Hydrostatic pressure Study in Effect of different parameters in Fine-Blanking process with FEM and Its Formulation Based on Artificial Neural Networks [Volume 10, Issue 1, 2010, Pages 15-27]
I
  • Incline Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
  • Inner Race Numerical Simulation and Physical Modeling By Plasticine For Production Of Inner Race Part Using Precision Forging Process [Volume 10, Issue 1, 2010, Pages 77-90]
  • Instability Numerical simulation of velocity field of two dimensional forced shear layer using the vortex element method [Volume 10, Issue 1, 2010, Pages 91-101]
  • Instantaneous Force Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell Square Column under Axial Loading [Volume 10, Issue 3, 2010, Pages 21-30]
  • Interval B-Spline A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
J
  • Jeffcott Rotor Design and Manufacturing of a Single Plane Automatic Dynamic Balancer [Volume 10, Issue 1, 2010, Pages 29-49]
  • Jet Centerline Direct Numerical Simulation of 2D Forced Jet using the Compact Finite Difference Method [Volume 10, Issue 3, 2010, Pages 9-20]
  • Jet Half-width Direct Numerical Simulation of 2D Forced Jet using the Compact Finite Difference Method [Volume 10, Issue 3, 2010, Pages 9-20]
K
  • Key Words: Cold Climate Determining Thermal Comfort Period for Tabriz [Volume 10, Issue 4, 2010, Pages 37-44]
  • KeyWords: Large Eddy Simulation Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Key words: Passive Scalar On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
  • Key words: peristalsis؛Arruda &ndash A Nonlinear Analysis of Urine Bolus Peristaltic Transport from the Renal Pelvis into the Bladder Using Computational Method of Fluid-Structure Interaction [Volume 10, Issue 4, 2010, Pages 55-74]
  • Key words: Turbulent Flow Numerical simulation of velocity field of two dimensional forced shear layer using the vortex element method [Volume 10, Issue 1, 2010, Pages 91-101]
  • KeyWords: Wood HDPE Composites Thermal Properties and the high Throughput of Extruded WPC [Volume 10, Issue 4, 2010, Pages 45-53]
L
  • Large Eddies On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
  • Laser Bending Theoretical and Experimental Study of the Effects of Process Parameters on Bending Angle in Laser Bending process [Volume 10, Issue 3, 2010, Pages 67-86]
  • Laser Forming Theoretical and Experimental Study of the Effects of Process Parameters on Bending Angle in Laser Bending process [Volume 10, Issue 3, 2010, Pages 67-86]
  • Lattice Mismatch Effect of Composition on the Precipitation of  in Rapidly Quenched Ni-Al Binary Alloys [Volume 10, Issue 1, 2010, Pages 103-109]
  • Localized Dynamic SGS Model Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Low Immersion Cutting dynamic simulation of Low Immersion End Milling Operation: Effect of cutting depth and feed rate [Volume 10, Issue 2, 2010, Pages 19-30]
M
  • Magnetic Bearing Experimental and Numerical Analysis to Evaluate the Effect of Different Parameters on Active Magnetic Bearing System [Volume 10, Issue 1, 2010, Pages 51-62]
  • Magnetic Levitation Experimental and Numerical Analysis to Evaluate the Effect of Different Parameters on Active Magnetic Bearing System [Volume 10, Issue 1, 2010, Pages 51-62]
  • Metal Forming A new Hydro forming Die Design for Improvement of Die Corner Filling of Stepped Tubes [Volume 10, Issue 3, 2010, Pages 87-98]
  • Methyl Ester Effect of Waste Oil Methyl Ester on Tractor Engine Performance [Volume 10, Issue 2, 2010, Pages 89-99]
  • Modal Analysis Design and Manufacturing of a Single Plane Automatic Dynamic Balancer [Volume 10, Issue 1, 2010, Pages 29-49]
N
  • Ni-Al System Effect of Composition on the Precipitation of  in Rapidly Quenched Ni-Al Binary Alloys [Volume 10, Issue 1, 2010, Pages 103-109]
  • Noncircular Bearing Investigation of Tilt Angle Effects for GAS-Lubricated Noncircular Journal Bearing Systems [Volume 10, Issue 2, 2010, Pages 69-78]
  • Nonlinear Analysis Nonlinear analysis of multi-layered beams with piezoelectric layeres considering large deformations [Volume 10, Issue 2, 2010, Pages 57-67]
  • Numerical simulation On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
  • Numerical solution Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
O
  • Optimal Trajectory Planning Optimal Trajectory Planning and Obstacle Avoidance of a Manipulator in the Presence of Ellipsoidal Obstacles Using Genetic Algorithms [Volume 10, Issue 4, 2010, Pages 75-84]
  • Optimization Application of Genetic Algorithms in Optimal Design of a Passive Suspension System a Vehicle Subjected to Random Excitations of Actual Road [Volume 10, Issue 4, 2010, Pages 1-12]
P
  • Panel Height Performance Improvement of Ceiling radiant Cooling System by Suitable Design of Panel Height [Volume 10, Issue 3, 2010, Pages 45-56]
  • Peripheral End milling Cutting dynamic simulation of Low Immersion End Milling Operation: Effect of cutting depth and feed rate [Volume 10, Issue 2, 2010, Pages 19-30]
  • Physical Modeling Numerical Simulation and Physical Modeling By Plasticine For Production Of Inner Race Part Using Precision Forging Process [Volume 10, Issue 1, 2010, Pages 77-90]
  • PID Control Experimental and Numerical Analysis to Evaluate the Effect of Different Parameters on Active Magnetic Bearing System [Volume 10, Issue 1, 2010, Pages 51-62]
  • Piezoelectric Nonlinear analysis of multi-layered beams with piezoelectric layeres considering large deformations [Volume 10, Issue 2, 2010, Pages 57-67]
  • Plane Elasticity General Solution of Plane Elasticity of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 3, 2010, Pages 31-43]
  • Plane Elasticity General Solution of Shear Deformation of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 4, 2010, Pages 13-26]
  • Plasticine Numerical Simulation and Physical Modeling By Plasticine For Production Of Inner Race Part Using Precision Forging Process [Volume 10, Issue 1, 2010, Pages 77-90]
  • Precision Forging Numerical Simulation and Physical Modeling By Plasticine For Production Of Inner Race Part Using Precision Forging Process [Volume 10, Issue 1, 2010, Pages 77-90]
R
  • Radiant Cooling System Performance Improvement of Ceiling radiant Cooling System by Suitable Design of Panel Height [Volume 10, Issue 3, 2010, Pages 45-56]
  • Radiation Conjugate Mixed convection with Surface Radiation in an Inclined Channel with Protruding Heat Sources [Volume 10, Issue 2, 2010, Pages 43-55]
  • Rapid Prototyping A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
  • Reverse engineering A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
  • Reverse flow Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
  • Road Random Excitation Application of Genetic Algorithms in Optimal Design of a Passive Suspension System a Vehicle Subjected to Random Excitations of Actual Road [Volume 10, Issue 4, 2010, Pages 1-12]
  • Robot Manipulators Optimal Trajectory Planning and Obstacle Avoidance of a Manipulator in the Presence of Ellipsoidal Obstacles Using Genetic Algorithms [Volume 10, Issue 4, 2010, Pages 75-84]
S
  • Sliced Model A Sliced Model for Manufacturing Aeronautical Structural Components using Rapid Prototyping Technology [Volume 10, Issue 4, 2010, Pages 27-36]
  • Smagorinsky SGS Model Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Specific heat Thermal Properties and the high Throughput of Extruded WPC [Volume 10, Issue 4, 2010, Pages 45-53]
  • Square Column Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell Square Column under Axial Loading [Volume 10, Issue 3, 2010, Pages 21-30]
  • Static and Stability Characteristics Investigation of Tilt Angle Effects for GAS-Lubricated Noncircular Journal Bearing Systems [Volume 10, Issue 2, 2010, Pages 69-78]
  • Stepped Tube A new Hydro forming Die Design for Improvement of Die Corner Filling of Stepped Tubes [Volume 10, Issue 3, 2010, Pages 87-98]
  • Strain hardening exponent Experimental and numerical investigation of double bulge tube hydroforming [Volume 10, Issue 3, 2010, Pages 1-9]
  • Strength coefficient Experimental and numerical investigation of double bulge tube hydroforming [Volume 10, Issue 3, 2010, Pages 1-9]
T
  • Thermal Comfort Performance Improvement of Ceiling radiant Cooling System by Suitable Design of Panel Height [Volume 10, Issue 3, 2010, Pages 45-56]
  • Thermal Effect Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
  • Thermal Performance Determining Thermal Comfort Period for Tabriz [Volume 10, Issue 4, 2010, Pages 37-44]
  • Thermal properties Thermal Properties and the high Throughput of Extruded WPC [Volume 10, Issue 4, 2010, Pages 45-53]
  • Thick-Walled Cylinder General Solution of Plane Elasticity of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 3, 2010, Pages 31-43]
  • Thick-Walled Cylinder General Solution of Shear Deformation of Axisymmetric Functionally Graded Thick Cylinderical Shells [Volume 10, Issue 4, 2010, Pages 13-26]
  • Tilt angle Investigation of Tilt Angle Effects for GAS-Lubricated Noncircular Journal Bearing Systems [Volume 10, Issue 2, 2010, Pages 69-78]
  • Tractor Engine Effect of Waste Oil Methyl Ester on Tractor Engine Performance [Volume 10, Issue 2, 2010, Pages 89-99]
  • Triple Microstructure An Investigation on Mechanical Properties of 42CrMo4 Steel with Tempered Martensite and Ferrite-Bainite-Martensite Microstructure [Volume 10, Issue 1, 2010, Pages 63-76]
  • Tube hydroforming A new Hydro forming Die Design for Improvement of Die Corner Filling of Stepped Tubes [Volume 10, Issue 3, 2010, Pages 87-98]
  • Turbulent flow Simulation of Turbulent Flow using LES Method with Localized Dynamic Sub Grid Scale Model [Volume 10, Issue 2, 2010, Pages 31-41]
  • Turbulent Flow Modeling On the two-dimensional turbulent flow and transport phenomena Using Large Eddy Simulation method [Volume 10, Issue 2, 2010, Pages 80-87]
V
  • Vehicle suspension system Application of Genetic Algorithms in Optimal Design of a Passive Suspension System a Vehicle Subjected to Random Excitations of Actual Road [Volume 10, Issue 4, 2010, Pages 1-12]
  • Vortex Element Method Numerical simulation of velocity field of two dimensional forced shear layer using the vortex element method [Volume 10, Issue 1, 2010, Pages 91-101]
  • V-ring Study in Effect of different parameters in Fine-Blanking process with FEM and Its Formulation Based on Artificial Neural Networks [Volume 10, Issue 1, 2010, Pages 15-27]
W
  • Wake Evaluation of the Range of Performance for a Probe Consisting of Two Parallel Hot-Film Cylindrical Sensors in Reverse Flows [Volume 10, Issue 3, 2010, Pages 57-66]
  • Wavy Interface Manufacturing of Bimetal Tubes Made of st-37 and Phosphor-Bronze Using Explosive Welding [Volume 10, Issue 2, 2010, Pages 1-17]
Y
  • Yield Strain Effect An Investigation on Mechanical Properties of 42CrMo4 Steel with Tempered Martensite and Ferrite-Bainite-Martensite Microstructure [Volume 10, Issue 1, 2010, Pages 63-76]