Modares Mechanical Engineering

Modares Mechanical Engineering

Keyword Index
A
  • A441 AISI Steel Study on joint zone Microstructure Evolution and Hardness in Friction Stir welding of AA1100 Aluminum alloy to A441 AISI steel [Volume 14, Issue 14, 2014, Pages 97-107]
  • AA1100 Aluminum Alloy Study on joint zone Microstructure Evolution and Hardness in Friction Stir welding of AA1100 Aluminum alloy to A441 AISI steel [Volume 14, Issue 14, 2014, Pages 97-107]
  • AA7075-T6 The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
  • Abdominal Aortic Aneurysm Fluid-Structure Interaction in a patient-specific abdominal aortic aneurysm: Effects of wall material model and heterogeneity on risk of rupture [Volume 14, Issue 11, 2014, Pages 115-126]
  • Abrasive Grit Grinding process investigation using creating scratch by an abrasive grit [Volume 14, Issue 13, 2014, Pages 245-250]
  • Abrasive Scratch Grinding process investigation using creating scratch by an abrasive grit [Volume 14, Issue 13, 2014, Pages 245-250]
  • Abrasive water jet cutting Cutting of Ti6Al4V titanium alloy using abrasive water jet and multiobjective optimization of geometry features [Volume 14, Issue 16, 2014, Pages 67-75]
  • Absorbed energy Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
  • Accumulation of plastic strain and Softening Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
  • Acoustic Identifying the vibration excitation location and energy stream-lines in a thin vibrating plate by using acoustical measurements [Volume 14, Issue 11, 2014, Pages 18-28]
  • Acoustic emission An Investigation to Corrosion of Stainless Steels by Acoustic Emission Method [Volume 14, Issue 2, 2014, Pages 195-200]
  • Acoustic emission Acoustic emission based study to monitor the initiation and growth of delamination in composite materials [Volume 14, Issue 3, 2014, Pages 78-84]
  • Acoustic emission Investigation of delamination and interlaminar fracture toughness assessment of Glass/Epoxy composite by acoustic emission [Volume 14, Issue 4, 2014, Pages 1-11]
  • Acoustic emission Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission [Volume 14, Issue 6, 2014, Pages 144-152]
  • Acoustic emission Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods [Volume 14, Issue 11, 2014, Pages 1-8]
  • Active Anti- roll Bar Control of the active anti-roll bar of Off-Road vehicle for roll stability improvement [Volume 14, Issue 10, 2014, Pages 85-92]
  • Active Micromixer Numerical investigation on the effect of various geometries on mixing efficiency of passive micromixers with oscillatory inlet velocities [Volume 14, Issue 7, 2014, Pages 27-34]
  • Active participation Rehabilitation Robots Control in Gait Training Exercises on a Treadmill [Volume 14, Issue 8, 2014, Pages 157-164]
  • Active Tipod Stable Platform Optimal Fuzzy Controller Design for an Active Tripod Stable Platform Using Virtual Prototyping [Volume 14, Issue 1, 2014, Pages 168-174]
  • Active Vibration Isolation Active vibration isolation using 6DOF Stewart platform: An experimental study [Volume 14, Issue 14, 2014, Pages 89-96]
  • Actuator dynamics Robust Control of Flexible Spacecraft Considering Actuator Dynamic [Volume 14, Issue 15, 2014, Pages 225-230]
  • Actuator failure Adaptive Flight Control Systems in Presence of Actuator Failures [Volume 14, Issue 16, 2014, Pages 83-93]
  • Adaptive Control Identification of Lorenz chaotic system based on synchronization using fractional order calculus [Volume 14, Issue 7, 2014, Pages 68-76]
  • Adaptive Control Adaptive Slippage Control in a One-Finger Hand Robot Manipulation [Volume 14, Issue 13, 2014, Pages 297-307]
  • Adaptive Control Adaptive Flight Control Systems in Presence of Actuator Failures [Volume 14, Issue 16, 2014, Pages 83-93]
  • Adaptive notch filter Dynamics modeling and active vibration control of a satellite with flexible solar panels [Volume 14, Issue 16, 2014, Pages 57-66]
  • Adjoint conjugate gradient Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
  • Admissible functions An introduction of new polynomial functions for nonlinear vibration analysis of cracked rectangular plates involving free edges [Volume 14, Issue 15, 2014, Pages 24-32]
  • Adsorption Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
  • Adsorption chiller Exergy Analysis of the Adsorbent Bed in adsorption chillers [Volume 14, Issue 2, 2014, Pages 70-78]
  • Aerodynamics Making and Analyzing Dynamical Prototypes of Bird-Like Wings [Volume 14, Issue 15, 2014, Pages 17-23]
  • Aeroelastic Parametric study for kinematic optimization of flapping wing vehicle using a new aeroelastic model [Volume 14, Issue 9, 2014, Pages 73-80]
  • Aerospace Launch Vehicle Soft Sensor Design for Fault Detection in ALV Pitch Gyro [Volume 14, Issue 7, 2014, Pages 157-162]
  • Airbag Modeling burn due to airbags deployment to evaluate the role of various parameters in producing burns [Volume 14, Issue 8, 2014, Pages 83-94]
  • Air-Bearing Using Air-Bearing Based Platform and Cold Gas Thruster Actuator for Satellite Attitude Dynamics Simulation [Volume 14, Issue 12, 2014, Pages 1-12]
  • Air-Conditioning Simulation and parameter study of small scale variable geometry ejector using CFD [Volume 14, Issue 5, 2014, Pages 129-136]
  • Air Damping Dynamic modeling of visco-elastic robotic manipulators using Timoshenko beam theory [Volume 14, Issue 1, 2014, Pages 131-139]
  • Airfoil Longitudinal Dynamic Derivatives of an Airfoil under Pitching and Plunging Oscillations in Wind Tunnel [Volume 14, Issue 10, 2014, Pages 159-166]
  • Air infiltration The effect of air infiltration from window gaps on the performance of baseboard heating system and occupants’ thermal comfort conditions [Volume 14, Issue 8, 2014, Pages 113-120]
  • Air Intake Experimental Investigation of the Buzz Cycle in a Supersonic Axisymmetric Intake [Volume 14, Issue 16, 2014, Pages 311-320]
  • AISI4340 Evaluation of workpiece hardness and cutting parameters effects on cutting force and surface roughness in drilling using vegetable-based cutting fluid [Volume 14, Issue 13, 2014, Pages 265-271]
  • AISI 4340 tool steel Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
  • AISI D2 steel Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods [Volume 14, Issue 11, 2014, Pages 1-8]
  • Al-1100 Investigation of tool parameters effects on the formability of Al-1100 in incremental sheet metal hammering process [Volume 14, Issue 14, 2014, Pages 185-189]
  • ALE The Study of Various Clamped Isotropic Square Plate Simulating Methods and Compare with Experimental Results under Explosion Loads [Volume 14, Issue 13, 2014, Pages 315-322]
  • Alignment and combination rules Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
  • Aluminium Sheet Effects of process parameters on bending magnitude in laser forming and determine an equation to predict bending angle [Volume 14, Issue 8, 2014, Pages 75-82]
  • Aluminnum alloy Investigation of Thermal, Mechanical and Microstructural Properties of 7000 Series Aluminum alloys Welding Using Friction Stir Welding process [Volume 14, Issue 14, 2014, Pages 148-154]
  • Aluminum 6061 Theoretical Model to investigate response of aluminum 6061 alloy under high strain rate loading [Volume 14, Issue 13, 2014, Pages 153-162]
  • Aluminum alloy Investigation of process parameters in production of cylindrical parts by gradient warm deep drawing [Volume 14, Issue 10, 2014, Pages 187-194]
  • Aluminum foam Modeling and analytical study of progressive collapse of aluminum foam [Volume 14, Issue 9, 2014, Pages 99-106]
  • Aluminum Matrix Composite Investigation the effect of hot rolling process on properties and microstructure of Al-B4C composite by vortex [Volume 14, Issue 9, 2014, Pages 140-146]
  • Aluminum Rotary Furnace Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace [Volume 14, Issue 16, 2014, Pages 252-260]
  • Aluminum tube Analytical Prediction of Limit Strains and Limit Stresses in Hydroforming of Anisotropic Aluminum Tubes [Volume 14, Issue 2, 2014, Pages 133-140]
  • Amplification factor On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
  • Analysis of dynamic behavior Analysis of dynamic behavior of FE model of drillstring – wellbore contact with improved contact model [Volume 14, Issue 11, 2014, Pages 185-194]
  • Analysis of Variance The application of central composite rotatable design to model and optimize the tensile strength of “composite–steel” connections [Volume 14, Issue 9, 2014, Pages 157-164]
  • Analytical and empirical investigation Modelling and empirical investigation of micro-electro-mechanical piezo-resisitive pressure sensor based on the requirements of petrochemical industry [Volume 14, Issue 16, 2014, Pages 349-357]
  • Analytical model of forming force Investigation of Ultrasonic Assisted Incremental Sheet Metal Forming Process. [Volume 14, Issue 11, 2014, Pages 106-114]
  • Analytical Solution Simulation and parameter study of small scale variable geometry ejector using CFD [Volume 14, Issue 5, 2014, Pages 129-136]
  • Analytical Solution Analysis of sandwich cylindrical shell with FGM core subjected to thermal shock [Volume 14, Issue 5, 2014, Pages 175-182]
  • Analytical Solution Nonlocal elasticity theory for thermo-elastic analysis of nanoscale spherical shell subjected to thermal shock [Volume 14, Issue 9, 2014, Pages 65-72]
  • Analytical Solution Stress analysis of symmetric composite laminates with quasi-rectangular hole subjected to in-plane loading [Volume 14, Issue 15, 2014, Pages 395-404]
  • Analytic model A parametric study of the performance of a membrane humidifier for PEM fuel cell [Volume 14, Issue 2, 2014, Pages 107-116]
  • Anchor Loss Modeling and calculating the anchor loss quality factor in the plunging-mode vibrations of a micromechanical rectangular-plate resonator with two T-shaped support beams [Volume 14, Issue 12, 2014, Pages 75-84]
  • Angiogenesis Mechanical Effects of Extra-cellular Matrix on Growth and Migration of Endothelial Cells in Tumor-induced Angiogenesis [Volume 14, Issue 7, 2014, Pages 1-9]
  • Anisotropy Analytical Prediction of Limit Strains and Limit Stresses in Hydroforming of Anisotropic Aluminum Tubes [Volume 14, Issue 2, 2014, Pages 133-140]
  • Anisotropy The effects of Hosford, Hill’s quadratic and non-quadratic yield criteria on prediction of forming limit diagrams based on M-K Model [Volume 14, Issue 5, 2014, Pages 137-146]
  • Anisotropy Numerical study of the impact of the initial turbulent integral length scale on the dynamics of a two dimensional shear-free turbulent mixing layer [Volume 14, Issue 6, 2014, Pages 113-123]
  • Annular vortex tube Introducing Annular vortex tube and Experimental Comparison of its performance with Vortex Tube [Volume 14, Issue 11, 2014, Pages 166-174]
  • Ansys-Fluent Drag Reduction in a High-Speed Planing Hull Using Tunnels [Volume 14, Issue 3, 2014, Pages 51-59]
  • Antilock Brake System (ABS) Vehicle Longitudinal Velocity Estimation Using two New Estimators and without Measuring the Braking Torque [Volume 14, Issue 5, 2014, Pages 183-193]
  • Approximate Voronoi diagram Geometric Model Segmentation using Approximate Voronoi Diagram and Fuzzy regions construction [Volume 14, Issue 15, 2014, Pages 127-136]
  • Arterial wall Investigation of Effective Parameters on Accumulation of Low-Density Lipoproteins based on the Multilayer Wall of the Carotid Artery [Volume 14, Issue 4, 2014, Pages 27-36]
  • Artificial Tactile Sensing Artificial tactile sensing capability in tumor detection of the liver tissue utilizing in vitro experimental data and hyperelastic finite element modeling [Volume 14, Issue 15, 2014, Pages 388-394]
  • Asymmetric Structure Nonlinear Mechanic Model of Asymmetric Structure- Base Isolator Interaction under Harmonic and Earthquake Loads and Study of its Nonlinear Phenomena-Revised [Volume 14, Issue 16, 2014, Pages 152-162]
  • Asymmetric Thermal Boundary Condition Single Phase and Two Phase Analysis of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct under an Asymmetric Thermal Boundary Condition [Volume 14, Issue 13, 2014, Pages 47-58]
  • Asymptotic Stability Trajectory tracking control of a wheeled mobile robot by a non-model-based control algorithm using PD-action filtered errors [Volume 14, Issue 12, 2014, Pages 171-178]
  • Atherosclerosis Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
  • Atherosclerotic Plaques Blood pulsatile effect on LDL mass transport in a multilayered carotid artery with atherosclerotic plaques [Volume 14, Issue 7, 2014, Pages 17-26]
  • Atomic Force Microscopy Modeling of Friction In Micro/Nano scale with Random Roughness Distribution [Volume 14, Issue 11, 2014, Pages 175-184]
  • Atomic Force Microscopy Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
  • Attitude control Design of LQG/LTR controller for attitude control of geostationary satellite using reduced quaternion model [Volume 14, Issue 6, 2014, Pages 1-10]
  • Attitude control Hardware-in-the-loop simulation for Attitude Control of a Suborbital Module using Cold Gas Thrusters [Volume 14, Issue 10, 2014, Pages 177-186]
  • Attitude Dynamics Using Air-Bearing Based Platform and Cold Gas Thruster Actuator for Satellite Attitude Dynamics Simulation [Volume 14, Issue 12, 2014, Pages 1-12]
  • Automatic Ball Balancer The effect of damping ratio and balls mass on the stability of automatic ball balancer and determining their optimum values [Volume 14, Issue 3, 2014, Pages 110-118]
  • Automatic Ball-Balancer Investigating the stability of automatic ball-balancer under the gyroscopic effect and optimization of its parameters using the Nelder-Mead simplex algorithm [Volume 14, Issue 14, 2014, Pages 155-166]
  • Autonomous Underwater Vehicle A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
  • Availability System design algorithm for mission oriented systems with reliability approach [Volume 14, Issue 13, 2014, Pages 7-18]
  • Average schedule The use of hot torsion testing for determination of critical temperatures of API X65 steel [Volume 14, Issue 13, 2014, Pages 291-296]
  • Axial Buckling Analytical solution for buckling of rectangular plates subjected to non-uniform in-plane loading based on first order shear deformation theory [Volume 14, Issue 13, 2014, Pages 37-46]
  • Axial Crack Effects of surface crack length and depth variations on gas transmission pipeline safety [Volume 14, Issue 5, 2014, Pages 26-32]
  • Axial load Buckling behavior investigation of grid stiffened composite conical shells under axial loading [Volume 14, Issue 15, 2014, Pages 170-176]
  • Axial Loading Stability analysis of weight optimum waffle cylindrical shells -A new approach [Volume 14, Issue 14, 2014, Pages 177-184]
  • Axially moving Timoshenko beam Nonlinear forced vibration of axially moving Timoshenko beam in thermal environment via the harmonic balance method [Volume 14, Issue 11, 2014, Pages 137-143]
B
  • Back bone Motion analysis of continuum robots structures with cable actuation [Volume 14, Issue 14, 2014, Pages 39-49]
  • Balance time The effect of damping ratio and balls mass on the stability of automatic ball balancer and determining their optimum values [Volume 14, Issue 3, 2014, Pages 110-118]
  • Ballistic impact Experimental study on Dynamic Response of grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 2, 2014, Pages 41-46]
  • Ballistic impact Numerical and experimental analyses of projectile penetration in grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 9, 2014, Pages 17-26]
  • Barotropic Model Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
  • Baseboard heating system The effect of air infiltration from window gaps on the performance of baseboard heating system and occupants’ thermal comfort conditions [Volume 14, Issue 8, 2014, Pages 113-120]
  • Base Isolator Nonlinear Mechanic Model of Asymmetric Structure- Base Isolator Interaction under Harmonic and Earthquake Loads and Study of its Nonlinear Phenomena-Revised [Volume 14, Issue 16, 2014, Pages 152-162]
  • Bed pressure drop An experimental study of fluidization of solids particles in a bubbling fluidized bed [Volume 14, Issue 16, 2014, Pages 94-100]
  • BEM Comparison of Aeroelastic performance base and optimized blades of Horizontal Axis Wind Turbine [Volume 14, Issue 16, 2014, Pages 283-290]
  • Bending Properties Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles [Volume 14, Issue 7, 2014, Pages 103-108]
  • Bifurcation Analytic Bifurcation Investigation of Cylindrical Shallow Shells under ‎Lateral Stochastic Excitation [Volume 14, Issue 7, 2014, Pages 77-84]
  • Bifurcation Nonlinear analysis of resonance between the blade and rotor by the bifurcation equation and numerical method [Volume 14, Issue 12, 2014, Pages 43-51]
  • Bifurcation Static/Dynamic Instability and Nonlinear Vibrations of FG Plates Resting on Elastic Foundation under Parametric Forcing Excitation [Volume 14, Issue 13, 2014, Pages 172-182]
  • Bifurcation Diagram Effects of Preload on Nonlinear Dynamic Behavior of Noncircular Aerodynamic Journal Bearing [Volume 14, Issue 16, 2014, Pages 45-56]
  • Bilayer graphene Free vibration analysis of bilayer graphenes with interlayer shear effect [Volume 14, Issue 7, 2014, Pages 131-138]
  • Bingham Plastic Model Development of Two Incompressible SPH methods to simulate sediment-laden free surface flows [Volume 14, Issue 12, 2014, Pages 91-103]
  • Biological membrane Calculation the Diffusion Coefficient for water and Lipid through the Biological Cell Bilayer Membranes Using Dissipative Particle Dynamics Method [Volume 14, Issue 5, 2014, Pages 102-110]
  • Birds Flight Making and Analyzing Dynamical Prototypes of Bird-Like Wings [Volume 14, Issue 15, 2014, Pages 17-23]
  • Blade Element Momentum (BEM) 3D Analysis of the Boundary Layer on Wind Turbine Blades [Volume 14, Issue 3, 2014, Pages 119-128]
  • Blade mount point Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
  • Blade preset pitch Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
  • Blockage ratio Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
  • Blood Filtration Numerical Analysis of Flow and Mass Transfer in the Renal Glomeruli Capillary Network [Volume 14, Issue 8, 2014, Pages 1-7]
  • Blood flow Numerical simulation of unsteady blood flow through an elastic artery with a non-symmetric stenosis [Volume 14, Issue 10, 2014, Pages 26-34]
  • Blood flow through capillaries A simultaneously solution of interstitial fluid flow in tumor tissue and blood flow in remodeled microvascular network induced by tumor [Volume 14, Issue 9, 2014, Pages 1-9]
  • Blowing Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
  • Bluff body Numerical study of bluff body effect on lean premixed hydrogen/air combustion in a micro- scale combustor [Volume 14, Issue 13, 2014, Pages 86-94]
  • Bolt Fatigue life estimation of bolts in flanges of a reinforced cylindrical shell [Volume 14, Issue 13, 2014, Pages 201-208]
  • Bond Graph Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
  • Bone Experimental and Analytical Investigation of Thrust Force In Ultrasonic Assisted Drilling of Bone [Volume 14, Issue 6, 2014, Pages 194-200]
  • Bone healing Effect of placement and material properties of tibial plate on stress pattern at fractured site [Volume 14, Issue 11, 2014, Pages 159-165]
  • Boron Carbide Investigation the effect of hot rolling process on properties and microstructure of Al-B4C composite by vortex [Volume 14, Issue 9, 2014, Pages 140-146]
  • Boundary Elements Method (BEM) Identifying two regular interfacial boundary configurations and simultaneously estimation of mechanical properties using Imperialist competitive Algorithm and Simplex method [Volume 14, Issue 10, 2014, Pages 71-79]
  • Boundary Layer Blowing and suction effect on drag and lift coefficients for viscous incompressible flows over hydrofoils by power-law preconditioning method [Volume 14, Issue 4, 2014, Pages 129-140]
  • Boundary Layer Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
  • Boundary layer flow A Numerical study of similarity solution for mixed-convection copper-water nanofluid boundary layer flow over a horizontal plate [Volume 14, Issue 14, 2014, Pages 190-198]
  • Brinson’s Model Evaluation of corrugated composite beam deflection by shape memory alloy wire [Volume 14, Issue 8, 2014, Pages 49-58]
  • B-Spline Shape optimization of free form shells under stress constraint [Volume 14, Issue 16, 2014, Pages 190-200]
  • B-spline curve Construction of smooth B-spline surfaces based on improving data point distribution [Volume 14, Issue 13, 2014, Pages 27-36]
  • B-spline surface Construction of smooth B-spline surfaces based on improving data point distribution [Volume 14, Issue 13, 2014, Pages 27-36]
  • Bubble Numerical Simulation and Investigation of Bubble Velocity and Deformation in Inclined Channel with Two Consecutive Slopes Using VOF-PLIC Method [Volume 14, Issue 11, 2014, Pages 29-36]
  • Buckling Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
  • Buckling forces Buckling and vibration of symmetrically-laminated composite elliptical plates resting on Winkler-type foundation subjected to initial in-plane stresses [Volume 14, Issue 1, 2014, Pages 19-26]
  • Buckling modelling Simple method for buckling load of composite conical Lattice structures under axial load [Volume 14, Issue 15, 2014, Pages 290-298]
  • Buckling of cylindrical shell Stability analysis of weight optimum waffle cylindrical shells -A new approach [Volume 14, Issue 14, 2014, Pages 177-184]
  • Buzz Experimental Investigation of the Buzz Cycle in a Supersonic Axisymmetric Intake [Volume 14, Issue 16, 2014, Pages 311-320]
C
  • Cable actuated Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
  • Cable actuated Motion analysis of continuum robots structures with cable actuation [Volume 14, Issue 14, 2014, Pages 39-49]
  • Calibration Design and fabrication of a force-moment measurement system for testing of the models in a water tunnel [Volume 14, Issue 14, 2014, Pages 291-298]
  • Cancer Proposing optimal chemotherapy protocol for cancer treatment with metastasis by using SDRE based optimal control technique [Volume 14, Issue 10, 2014, Pages 139-149]
  • Capillary Network Numerical Analysis of Flow and Mass Transfer in the Renal Glomeruli Capillary Network [Volume 14, Issue 8, 2014, Pages 1-7]
  • Carbon nanotube The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
  • Carbon nanotube An investigation on effects of aspect ratio of representative volume element on elastic modulus of a carbon nanotubes reinforced polymer [Volume 14, Issue 9, 2014, Pages 107-116]
  • Carbon nanotube Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
  • Carbon nanotubes Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
  • Carbon nanotubes Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
  • Cardan Angle Obtaining Stable Cardan Angles in Rotating Systems and Investigating the Effective Parameters on System Stability [Volume 14, Issue 12, 2014, Pages 163-170]
  • Carreau-Yasuda model Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
  • Cartesian workspace Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
  • Casing Treatment Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
  • Catalytic radiant burner 2D Simulation of Catalytic Radiant Counter-Diffusive Burners [Volume 14, Issue 5, 2014, Pages 83-90]
  • Cavitating Flow Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
  • Cavity Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
  • CCHP Design of CCHP system for office buildings in Tehran and thermodynamical, environmental and economical evaluation in comparison to conventional system [Volume 14, Issue 6, 2014, Pages 124-134]
  • CCHP Multi-criteria evaluation of CCHP system under different operating strategies for an office building in Tehran using AHP method [Volume 14, Issue 8, 2014, Pages 37-48]
  • Cellular Pott’s Model Mechanical Effects of Extra-cellular Matrix on Growth and Migration of Endothelial Cells in Tumor-induced Angiogenesis [Volume 14, Issue 7, 2014, Pages 1-9]
  • Center crack Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
  • Central composite design The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
  • Central composite rotatable design The application of central composite rotatable design to model and optimize the tensile strength of “composite–steel” connections [Volume 14, Issue 9, 2014, Pages 157-164]
  • Centrifugal compressor Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
  • Ceramic microballoon Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams [Volume 14, Issue 2, 2014, Pages 47-54]
  • Ceramic microballoon Volume fraction and microballoon size effects on the compressive properties of epoxy/ceramic microballoon syntactic foam [Volume 14, Issue 4, 2014, Pages 37-44]
  • Cerebrospinal fluid Relationship between Spinal fluid pressure and Cerebrospinal fluid pressure as an index for assessment of hydrocephalus non-communicating [Volume 14, Issue 13, 2014, Pages 308-314]
  • CFD Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
  • CFD Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
  • CFD Parametric Study of Ocean Wave Turbine (Wells Type) over the Floating Oscillating Platform: A Numerical Analysis [Volume 14, Issue 13, 2014, Pages 77-85]
  • CFD Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace [Volume 14, Issue 16, 2014, Pages 252-260]
  • Chaboche plasticity model An investigation into strain rate dependency of Chaboche plasticity model [Volume 14, Issue 14, 2014, Pages 9-16]
  • Chang elastic-plastic contact theory Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
  • Changing cross section profile Investigation of Web Warping of Profiles with Changing Cross Section in Flexible Roll Forming Process [Volume 14, Issue 6, 2014, Pages 72-80]
  • Chaos Control Bifurcation and chaos control in a gear transmission [Volume 14, Issue 14, 2014, Pages 61-68]
  • Chaotic Behavior Analyze of lubricant effect on stabilizing the dynamic behavior of slider- crank mechanism with revolute joint clearance [Volume 14, Issue 15, 2014, Pages 377-387]
  • Chip Thickness Modeling the cutting force in ultrasonic-vibration assisted milling and its empirical study [Volume 14, Issue 9, 2014, Pages 10-16]
  • Circular chamber Numerical investigation of the mixing performance of two-blade twin and circular mixers by using an improved Weakly Compressible Smoothed Particle Hydrodynamics [Volume 14, Issue 11, 2014, Pages 97-105]
  • CIRCULAR PLATES Effect of functionally graded microstructure on dynamic stability of piezoelectric circular plates [Volume 14, Issue 1, 2014, Pages 140-148]
  • Clamped rectangular micro-plates Presenting a size-dependent electro-mechanical model for rectangular plates-based resonant micro-sensors based on modified couple stress theory [Volume 14, Issue 8, 2014, Pages 121-130]
  • Clay Nanoparticles Studies on the Tensile and Flexural Properties of TETA-Cured Epoxy Resins Modified With Clay [Volume 14, Issue 6, 2014, Pages 29-34]
  • Clay Nanoparticles Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
  • Closed-cell foams Geometrical modeling of closed-cell metal foams using Stochastic cells generation [Volume 14, Issue 3, 2014, Pages 129-135]
  • Closed-Cell Metal Foams Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
  • Clothing Evaluation of Thermal and Moisture Inertia Effects in Clothing and Gagge’s Model Modification for Body Thermal Sensation and Physiological Responses Estimation [Volume 14, Issue 3, 2014, Pages 167-175]
  • Coal particles Experimental study on the effect of coal particles injection on flame structure, radiation heat transfer, temperature distribution and thermal efficiency in natural gas diffusion flames [Volume 14, Issue 7, 2014, Pages 163-168]
  • Coarse grain molecular dynamics Coarse grain molecular dynamics simulation of drug carrier penetration into cell membrane [Volume 14, Issue 15, 2014, Pages 316-322]
  • Coarse Grid CFD (CGCFD) Investigation of Trailing Edge Flapping on Lift Coefficient of NACA0015 Airfoil in Low Angles of Attack [Volume 14, Issue 2, 2014, Pages 175-187]
  • Cohesive interface element Analysis of composite skin/stringer debonding and failure under static loading using cohesive zone model [Volume 14, Issue 10, 2014, Pages 17-25]
  • Cold Gas Thruster Hardware-in-the-loop simulation for Attitude Control of a Suborbital Module using Cold Gas Thrusters [Volume 14, Issue 10, 2014, Pages 177-186]
  • Cold Gas Thruster Using Air-Bearing Based Platform and Cold Gas Thruster Actuator for Satellite Attitude Dynamics Simulation [Volume 14, Issue 12, 2014, Pages 1-12]
  • Cold Spray A comparative study between Johnson-Cook and PTW models in simulation of cold spray process [Volume 14, Issue 2, 2014, Pages 188-194]
  • Collaborative Optimization (CO) Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
  • Color Noise Optimal state estimation of a dynamical system corrupted with colored noises using Mixed Kalman/H-infinity filter [Volume 14, Issue 12, 2014, Pages 67-74]
  • Combustion in Micro Scale Dynamics of lean hydrogen/air flame regimes in micro scale combustion [Volume 14, Issue 3, 2014, Pages 94-102]
  • Combustion in small scale Numerical study of bluff body effect on lean premixed hydrogen/air combustion in a micro- scale combustor [Volume 14, Issue 13, 2014, Pages 86-94]
  • Common knot vector Construction of smooth B-spline surfaces based on improving data point distribution [Volume 14, Issue 13, 2014, Pages 27-36]
  • Complex DoF Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
  • Composite Experimental investigation on ballistic behavior of sandwich panels made of honeycomb core [Volume 14, Issue 4, 2014, Pages 21-26]
  • Composite Analytical and experimental investigation into the crushing behavior of hat shaped composite energy absorber [Volume 14, Issue 14, 2014, Pages 211-216]
  • Composite beam Static analysis of composite box beams by dimensional reduction method [Volume 14, Issue 16, 2014, Pages 367-374]
  • Composite laminate Effect of impactor shape and temperature on the behavior of E-glass/epoxy composite laminates [Volume 14, Issue 10, 2014, Pages 1-8]
  • Composite laminates Buckling and vibration of symmetrically-laminated composite elliptical plates resting on Winkler-type foundation subjected to initial in-plane stresses [Volume 14, Issue 1, 2014, Pages 19-26]
  • Composite patches An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
  • Composite plate Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
  • Composites Simple method for buckling load of composite conical Lattice structures under axial load [Volume 14, Issue 15, 2014, Pages 290-298]
  • Composite sandwich beam On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
  • Compressible fluid flow Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
  • Compression stiffened panel Preliminary design of compression stiffened panel using structural index concept [Volume 14, Issue 13, 2014, Pages 67-76]
  • Compressive spring Design and dynamic modeling of a module included a compressive spring and actuated by shape memory alloy wire [Volume 14, Issue 14, 2014, Pages 17-26]
  • Computational Dynamics Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
  • Computational Fluid Dynamics Relationship between Spinal fluid pressure and Cerebrospinal fluid pressure as an index for assessment of hydrocephalus non-communicating [Volume 14, Issue 13, 2014, Pages 308-314]
  • Computational Fluid Dynamics Study on Frictional Heat Behavior and Material Flow during Friction Stir Welding Of AA1100 Aluminum Alloy [Volume 14, Issue 14, 2014, Pages 251-261]
  • Computational Fluid Dynamics Numerical simulation of turbulent airflow in a human upper respiratory system [Volume 14, Issue 15, 2014, Pages 267-272]
  • Computational Fluids Dynamic A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
  • Computer Aided Design An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
  • Computer Control Polishing Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
  • Condition Monitoring Tool wear condition monitoring using time- frequency marginal integral of motor current signal [Volume 14, Issue 16, 2014, Pages 181-189]
  • Condition Number Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
  • Conformal Mapping Stress analysis of symmetric composite laminates with quasi-rectangular hole subjected to in-plane loading [Volume 14, Issue 15, 2014, Pages 395-404]
  • Conical shell Free vibration analysis of nanotube-reinforced composite truncated conical shell resting on elastic foundation [Volume 14, Issue 12, 2014, Pages 122-132]
  • Conical shells Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
  • Conjugate gradient Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
  • Consecutive inclinations Experimental Study of Gas-Liquid Two-Phase Flow in the Consecutive Inclinations of a Large Bend [Volume 14, Issue 12, 2014, Pages 52-60]
  • Consecutive inclinations Experimental study of length, velocity and frequency of taylor bubbles in gas-liquid two-phase flow in a large bend [Volume 14, Issue 12, 2014, Pages 133-144]
  • Consensus Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
  • Consistency An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
  • Constant-Curvature Elements Dynamics Modeling of Continuum Manipulators by Constant-Curvature Elements without Numerical Singularities [Volume 14, Issue 15, 2014, Pages 231-240]
  • Contact boundary condition estimation Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
  • Contact Force Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
  • Contact Force Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
  • Contact Force Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
  • Contact Interaction Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
  • Continuous cooling torsion test The use of hot torsion testing for determination of critical temperatures of API X65 steel [Volume 14, Issue 13, 2014, Pages 291-296]
  • Continuum damage mechanics Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
  • Continuum Robots Motion analysis of continuum robots structures with cable actuation [Volume 14, Issue 14, 2014, Pages 39-49]
  • Continuum Robots Dynamics Modeling of Continuum Manipulators by Constant-Curvature Elements without Numerical Singularities [Volume 14, Issue 15, 2014, Pages 231-240]
  • Control Performance investigation of control and guidance system for a spinning flight vehicle with dithering canard [Volume 14, Issue 7, 2014, Pages 169-175]
  • Controllable workspace.‎ Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
  • Control-Oriented Modeling Modeling and Simulation of Combustion in SI Engines via Neural Networks and Investigation of Calibration and Data Acquisition in the GT-Power [Volume 14, Issue 13, 2014, Pages 233-244]
  • Control Surfaces A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
  • Convective heat Transfer enhancement Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
  • Conventional Milling Modeling the cutting force in ultrasonic-vibration assisted milling and its empirical study [Volume 14, Issue 9, 2014, Pages 10-16]
  • Converging-diverging nozzle Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
  • ConWep The Study of Various Clamped Isotropic Square Plate Simulating Methods and Compare with Experimental Results under Explosion Loads [Volume 14, Issue 13, 2014, Pages 315-322]
  • Cooling Power Exergy Analysis of the Adsorbent Bed in adsorption chillers [Volume 14, Issue 2, 2014, Pages 70-78]
  • COP Thermodynamic analysis and optimization of a novel ejector- cascade refrigeration cycle [Volume 14, Issue 7, 2014, Pages 85-93]
  • Coronary Stent Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
  • Co-rotational approach Using co-rotational approach for analysing nonlinear dynamic tensegrity structures [Volume 14, Issue 14, 2014, Pages 245-250]
  • Corrugated Composite Beam Evaluation of corrugated composite beam deflection by shape memory alloy wire [Volume 14, Issue 8, 2014, Pages 49-58]
  • Coupled Lagrangian-Eulrian method Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
  • Couple Stress Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
  • Coupling of the fracture modes Mixed mode two dimensional weight functions for the subsurface elliptical cracks under normal loadings [Volume 14, Issue 10, 2014, Pages 50-58]
  • Coupling of the fracture modes Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
  • Crack Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
  • Crack closure effect Using the finite cell method to predict ductile damage with crack closure effect [Volume 14, Issue 13, 2014, Pages 107-118]
  • Crack detection Detection of Size and Location of Crack in Pipes Under Fluid Pressure by Neural Networks [Volume 14, Issue 7, 2014, Pages 35-42]
  • Cracked Cylinder Explicit expressions of stress intensity factor for external semi-elliptical circumferential cracks in a cylinder under mechanical and thermal loads [Volume 14, Issue 9, 2014, Pages 90-98]
  • Cracked plate An introduction of new polynomial functions for nonlinear vibration analysis of cracked rectangular plates involving free edges [Volume 14, Issue 15, 2014, Pages 24-32]
  • Crack Growth Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
  • Crack path prediction Fatigue lifetime and crack path prediction in four-point bending test of friction stir Cu-7075-T6 Aluminum alloy welded joints [Volume 14, Issue 8, 2014, Pages 193-198]
  • Critical Speed On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
  • Critical submergence Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
  • Critical velocity Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
  • Critical ventilation velocity Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
  • Cross Linking Study of the structure and glass transition behavior of epoxy polymers using molecular dynamics [Volume 14, Issue 6, 2014, Pages 107-112]
  • Crushing strength Investigation on in-plane behavior of bare and foam-filled honeycombs in quasi-static and dynamic states by using numerical method [Volume 14, Issue 15, 2014, Pages 177-185]
  • Cryogenics Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
  • CuO nanofluid Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
  • Curved boundary Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
  • Curved plate Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
  • Curve fitting Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
  • CUSP method Optimization of CUSP Technique Using Inverse Modeling for Improvement of Jameson’s 2-D Finite Volume Method [Volume 14, Issue 8, 2014, Pages 174-182]
  • Cut cell Using marching cube algorithm for 3D grain burn-back analysis in Solid Rocket Motors based on level set method [Volume 14, Issue 15, 2014, Pages 85-95]
  • Cut-off Valve Mathematical and Numerical Modeling along with the Stability Analysis of Liquid Propellant Rocket Engine Cut-off Valve [Volume 14, Issue 8, 2014, Pages 95-102]
  • Cutting fluid Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
  • Cycle time Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
  • Cyclic Bending Load Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
  • Cyclic Combined Load Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
  • Cylindrical shell Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
  • Cylindrical shell Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
  • Cylindrical shells Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
D
  • Damage Numerical and experimental analyses of projectile penetration in grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 9, 2014, Pages 17-26]
  • Damage Initiation Acoustic emission based study to monitor the initiation and growth of delamination in composite materials [Volume 14, Issue 3, 2014, Pages 78-84]
  • Damage Mechanics Simulation of crack initiation and propagation in hydraulic fracturing of oil wellbore by maximum principal stress criterion [Volume 14, Issue 5, 2014, Pages 164-174]
  • Damage patterns Numerical Investigation on Damage Patterns of Low Swirl Translating Tornadoes [Volume 14, Issue 6, 2014, Pages 81-90]
  • Damage variable Analysis of composite skin/stringer debonding and failure under static loading using cohesive zone model [Volume 14, Issue 10, 2014, Pages 17-25]
  • Dam Break Development of Two Incompressible SPH methods to simulate sediment-laden free surface flows [Volume 14, Issue 12, 2014, Pages 91-103]
  • Dam Break Problems An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
  • Damped Structure Model updating of damped structures using SMURF technique [Volume 14, Issue 4, 2014, Pages 65-74]
  • Damping Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
  • Damping Simulation and Experimental Evaluation of a Magneto-Rheological Hydraulic Engine Mount [Volume 14, Issue 10, 2014, Pages 43-49]
  • Deborah number Analysis of Motion and Shape of Non-Newtonian Falling Drops in a Viscous Liquid [Volume 14, Issue 13, 2014, Pages 183-190]
  • Deburring Experimental Study of the Magnetic Abrasive Deburring of Stainless Steel Drilled Parts [Volume 14, Issue 2, 2014, Pages 19-26]
  • Decentralized Dynamic Output Feedback Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
  • Deflection Evaluation of corrugated composite beam deflection by shape memory alloy wire [Volume 14, Issue 8, 2014, Pages 49-58]
  • Delamination Acoustic emission based study to monitor the initiation and growth of delamination in composite materials [Volume 14, Issue 3, 2014, Pages 78-84]
  • Delamination Investigation of delamination and interlaminar fracture toughness assessment of Glass/Epoxy composite by acoustic emission [Volume 14, Issue 4, 2014, Pages 1-11]
  • Delamination Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission [Volume 14, Issue 6, 2014, Pages 144-152]
  • Delamination Analysis of composite skin/stringer debonding and failure under static loading using cohesive zone model [Volume 14, Issue 10, 2014, Pages 17-25]
  • Density functional theory Studying the mechanical properties of monolayer tungsten disulfide (WS2) nanosheets [Volume 14, Issue 5, 2014, Pages 11-14]
  • Derailment factor Railway vehicle derailment in curve due to wear [Volume 14, Issue 8, 2014, Pages 199-208]
  • Design of experiment Effects of process parameters on bending magnitude in laser forming and determine an equation to predict bending angle [Volume 14, Issue 8, 2014, Pages 75-82]
  • DES Model Turbulent wind flow simulation over Tarbiat Modares University [Volume 14, Issue 13, 2014, Pages 272-280]
  • Determination of mechanical properties Studying the mechanical properties of monolayer tungsten disulfide (WS2) nanosheets [Volume 14, Issue 5, 2014, Pages 11-14]
  • Diameter Investigation of tool parameters effects on the formability of Al-1100 in incremental sheet metal hammering process [Volume 14, Issue 14, 2014, Pages 185-189]
  • Differential evolution Multi-objective optimum design of gripper mechanism using uniform diversity differential evolution [Volume 14, Issue 11, 2014, Pages 204-208]
  • Differential Quadrature Element Method(DQEM) Free whirling analysis of multi-step Timoshenko rotor with multiple bearing using DQEM [Volume 14, Issue 10, 2014, Pages 109-120]
  • Differential transforms method Nonlocal elasticity theory for thermo-elastic analysis of nanoscale spherical shell subjected to thermal shock [Volume 14, Issue 9, 2014, Pages 65-72]
  • Diffusion Calculation the Diffusion Coefficient for water and Lipid through the Biological Cell Bilayer Membranes Using Dissipative Particle Dynamics Method [Volume 14, Issue 5, 2014, Pages 102-110]
  • Dimensional accuracy Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming [Volume 14, Issue 1, 2014, Pages 89-96]
  • Dimensionless parameters Nonlinear analysis of chatter in turning process considering workpiece and cutting tool dynamics simultaneously [Volume 14, Issue 4, 2014, Pages 177-188]
  • Direct Numerical Simulation Study of vortical structures in a microfiber-induced drag-reduced turbulent channel flow using DNS [Volume 14, Issue 3, 2014, Pages 85-93]
  • Direct Numerical Simulation Development of Stochastic Field Method for DNS of Drag Reduction by Microfibers in Turbulent Channel Flow [Volume 14, Issue 4, 2014, Pages 75-82]
  • Direct Numerical Simulation A new algebraic model based on the velocity correlation tensor for DNS of turbulent drag reduction by microfiber additives [Volume 14, Issue 16, 2014, Pages 223-230]
  • Discrete- Continuous Multi-Objective Optimization Pareto discrete- continuous optimization of Sikorsky ASH-3D helicopter main gearbox [Volume 14, Issue 16, 2014, Pages 170-180]
  • Discrete Element Discrete element method to study the impact of different parameters on the screen performance [Volume 14, Issue 9, 2014, Pages 27-34]
  • Displacement ventilation system Investigating the effect of supply air temperature on thermal comfort and indoor air quality for a displacement ventilated room in summer [Volume 14, Issue 9, 2014, Pages 35-44]
  • Dissipative Particle Dynamics (DPD) Calculation the Diffusion Coefficient for water and Lipid through the Biological Cell Bilayer Membranes Using Dissipative Particle Dynamics Method [Volume 14, Issue 5, 2014, Pages 102-110]
  • Distributed Parameters Method Investigating Energy Harvesting from Unimorph Trapezoidal Beam Vibrations Using Distributed Parameters Method [Volume 14, Issue 15, 2014, Pages 96-102]
  • DNS Numerical study of the impact of the initial turbulent integral length scale on the dynamics of a two dimensional shear-free turbulent mixing layer [Volume 14, Issue 6, 2014, Pages 113-123]
  • Double Panel Power Sound Transmission through Double-Walled Laminated Composite Panel with Intermediate Porous Layer Considering Different Boundary Conditions [Volume 14, Issue 6, 2014, Pages 11-21]
  • Double phase lag Temperature Distribution in a Hollow Cylinder Composed of Functionally Graded Material using Fractional Non-Fourier Single Phase Lag model [Volume 14, Issue 7, 2014, Pages 61-67]
  • Double-stranded DNA Study of nanomechanical behavior of double-stranded DNA molecule under tensile forces [Volume 14, Issue 12, 2014, Pages 104-112]
  • Drag coefficient Numerical study of flow characteristics around a NACA 4412 asymmetric airfoil under the influence of electric field [Volume 14, Issue 5, 2014, Pages 147-154]
  • Drag Reduction A new algebraic model based on the velocity correlation tensor for DNS of turbulent drag reduction by microfiber additives [Volume 14, Issue 16, 2014, Pages 223-230]
  • Drilling Experimental Study of the Magnetic Abrasive Deburring of Stainless Steel Drilled Parts [Volume 14, Issue 2, 2014, Pages 19-26]
  • Drilling Evaluation of workpiece hardness and cutting parameters effects on cutting force and surface roughness in drilling using vegetable-based cutting fluid [Volume 14, Issue 13, 2014, Pages 265-271]
  • Drilling Empirical study of dimensional and geometrical tolerances in helical milling of 4340 steel [Volume 14, Issue 15, 2014, Pages 119-126]
  • Drilling Compare and study of hole quality characteristics in helical milling and drilling [Volume 14, Issue 16, 2014, Pages 332-338]
  • Drillstring Analysis of dynamic behavior of FE model of drillstring – wellbore contact with improved contact model [Volume 14, Issue 11, 2014, Pages 185-194]
  • Drillstring Analysis of Dynamic Behavior of Non-linear FE Model of Drillstring [Volume 14, Issue 13, 2014, Pages 119-130]
  • Driving cycle Feasibility study and design of hydraulic hybrid powertrain system for a refuse truck [Volume 14, Issue 15, 2014, Pages 307-315]
  • DR method Nonlinear bending analysis of circular functionally graded sandwich plates [Volume 14, Issue 4, 2014, Pages 111-121]
  • Drowsy driving Drowsy Driving Analysis Based on Steering & Lane Position Variables Using Passenger Driving Simulator [Volume 14, Issue 9, 2014, Pages 165-174]
  • Drug delivery Coarse grain molecular dynamics simulation of drug carrier penetration into cell membrane [Volume 14, Issue 15, 2014, Pages 316-322]
  • Dry electro-discharge machining (Dry EDM) Optimization of material removal rate in dry electro-discharge machining process 2 [Volume 14, Issue 12, 2014, Pages 113-121]
  • Dryer Modeling and analysis of fluidized bed dryer of Bandar Imam Petrochemical Complex for energy and exergy efficiency improvement [Volume 14, Issue 11, 2014, Pages 77-88]
  • Dual-arm cam-lock robot Joint Space Kinematic Optimization of the Dual-Arm Cam-Lock Robot [Volume 14, Issue 11, 2014, Pages 127-136]
  • Ductile damage Using the finite cell method to predict ductile damage with crack closure effect [Volume 14, Issue 13, 2014, Pages 107-118]
  • Dynamic Analysis Analysis of Dynamic Behavior of Non-linear FE Model of Drillstring [Volume 14, Issue 13, 2014, Pages 119-130]
  • Dynamic Atomic Force Microscope Nonlinear vibration analysis of an atomic force microscope microcantilever in the tapping mode based on the modified couple stress theory [Volume 14, Issue 11, 2014, Pages 9-17]
  • Dynamic Instability Static/Dynamic Instability and Nonlinear Vibrations of FG Plates Resting on Elastic Foundation under Parametric Forcing Excitation [Volume 14, Issue 13, 2014, Pages 172-182]
  • Dynamic Inversion Robust Control of Flexible Spacecraft Considering Actuator Dynamic [Volume 14, Issue 15, 2014, Pages 225-230]
  • Dynamic Load Carrying Capacity (DLCC) Theoretical and experimental investigation of dynamic load carrying capacity of flexible link manipulator in point-to-point motion [Volume 14, Issue 15, 2014, Pages 199-206]
  • Dynamic loading The Study of Various Clamped Isotropic Square Plate Simulating Methods and Compare with Experimental Results under Explosion Loads [Volume 14, Issue 13, 2014, Pages 315-322]
  • Dynamic loading Using co-rotational approach for analysing nonlinear dynamic tensegrity structures [Volume 14, Issue 14, 2014, Pages 245-250]
  • Dynamic LuGre model Precise position control of mechanical systems with friction based on dynamic LuGre mode [Volume 14, Issue 1, 2014, Pages 1-9]
  • Dynamic modeling Inverse Dynamic Problem of Two Parallel Manipulators with Identical Limbs Structures [Volume 14, Issue 13, 2014, Pages 281-290]
  • Dynamic modeling Design and dynamic modeling of a module included a compressive spring and actuated by shape memory alloy wire [Volume 14, Issue 14, 2014, Pages 17-26]
  • Dynamics modeling Dynamics Modeling of Continuum Manipulators by Constant-Curvature Elements without Numerical Singularities [Volume 14, Issue 15, 2014, Pages 231-240]
  • Dynamic Stability Effect of functionally graded microstructure on dynamic stability of piezoelectric circular plates [Volume 14, Issue 1, 2014, Pages 140-148]
  • Dynamic Stiffness Simulation and Experimental Evaluation of a Magneto-Rheological Hydraulic Engine Mount [Volume 14, Issue 10, 2014, Pages 43-49]
  • Dynamic stress intensity factors (DSIFs) Computation of dynamic stress intensity factors for three-dimensional cracks in functionally graded materials using interaction integral method [Volume 14, Issue 14, 2014, Pages 108-116]
E
  • Eddy Current Optimal Design, modeling and manufacturing of the eddy current damper by arrangement permanent magnet [Volume 14, Issue 16, 2014, Pages 163-169]
  • Eddy Current Dampers Optimal Design, modeling and manufacturing of the eddy current damper by arrangement permanent magnet [Volume 14, Issue 16, 2014, Pages 163-169]
  • Ejector- cascade refrigeration cycle Thermodynamic analysis and optimization of a novel ejector- cascade refrigeration cycle [Volume 14, Issue 7, 2014, Pages 85-93]
  • Elastic-fully plastic deformation Analytical Study of Elastic-Plastic Deformation of a Rotating Hollow FGM Cylinder [Volume 14, Issue 5, 2014, Pages 73-82]
  • Elastic modulus Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test [Volume 14, Issue 1, 2014, Pages 149-157]
  • Elastic modulus An investigation on effects of aspect ratio of representative volume element on elastic modulus of a carbon nanotubes reinforced polymer [Volume 14, Issue 9, 2014, Pages 107-116]
  • Elastic modulus Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
  • Elastic-plastic contact theories Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
  • Elastic-Plastic wave Modeling and analytical study of progressive collapse of aluminum foam [Volume 14, Issue 9, 2014, Pages 99-106]
  • Elastic Supports Optimum absorber design for beam subjected to a moving oscillator and effect of crack occurrence on absorber performance [Volume 14, Issue 13, 2014, Pages 163-171]
  • Elbow Study on strain accumulation of carbon Steel pressurized piping elbows under dynamic out-of-plane bendings [Volume 14, Issue 15, 2014, Pages 218-224]
  • Elbow joint Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
  • Electric Actuator Control of the active anti-roll bar of Off-Road vehicle for roll stability improvement [Volume 14, Issue 10, 2014, Pages 85-92]
  • Electrical demand management Multi-criteria evaluation of CCHP system under different operating strategies for an office building in Tehran using AHP method [Volume 14, Issue 8, 2014, Pages 37-48]
  • Electrical discharge machining Investigation on Performance of Ultra Fine Grained Pure Copper as Electrode during Electrical Discharge Machining [Volume 14, Issue 1, 2014, Pages 97-105]
  • Electrical Power Experimental investigation of the effects of machining parameters and lubrication on consumed power and surface roughness in CK45 steel milling [Volume 14, Issue 10, 2014, Pages 80-84]
  • Electrical properties Microstructure, Mechanical and Electrical Properties of Commercially Pure Copper Deformed Severely by Equal Channel Angular Pressing [Volume 14, Issue 15, 2014, Pages 257-266]
  • Electroacoustic tests Simulation and optimization of Tonpilz transducer by FEM and comparing the results with electroacoustic tests [Volume 14, Issue 10, 2014, Pages 63-70]
  • Electrocardiogram Application of a Simple Robust 2-D Pictorial-Geometrical Feature on QRS Complex Detection [Volume 14, Issue 7, 2014, Pages 117-121]
  • Electrode-field length Numerical analysis of thermodynamic behavior of an MHD micropump by simultaneously changing the length of electric and magnetic fields [Volume 14, Issue 6, 2014, Pages 91-98]
  • Electro-elastic properties A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method [Volume 14, Issue 6, 2014, Pages 175-184]
  • Electro hydraulic servo systems Investigation of the Stability of Electro Hydraulic Servo System using Fuzzy Intelligent Controller [Volume 14, Issue 3, 2014, Pages 36-42]
  • Electrohydrodynamic Numerical study of flow characteristics around a NACA 4412 asymmetric airfoil under the influence of electric field [Volume 14, Issue 5, 2014, Pages 147-154]
  • Electrostatic Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
  • Element free Galerkin method A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method [Volume 14, Issue 6, 2014, Pages 175-184]
  • Elliptical subsurface crack Mixed mode two dimensional weight functions for the subsurface elliptical cracks under normal loadings [Volume 14, Issue 10, 2014, Pages 50-58]
  • Elliptical subsurface cracks Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
  • Empirical analysis of strain Experimental and numerical study of formability in stainless steel 304 tube by hydroforming process [Volume 14, Issue 13, 2014, Pages 224-232]
  • Enclosure Numerical study of effective techniques to increase mixed convection heat transfer rate within the enclosure subjected to magnetic field [Volume 14, Issue 3, 2014, Pages 69-77]
  • Enclosure The Effect of magnetic field on the natural Convection of a nanofluid in a Square enclosure with a membrane separator in the middle [Volume 14, Issue 5, 2014, Pages 111-120]
  • Energy barrier calculation Coarse grain molecular dynamics simulation of drug carrier penetration into cell membrane [Volume 14, Issue 15, 2014, Pages 316-322]
  • Energy Consumption Optimization Investigating the effect of supply air temperature on thermal comfort and indoor air quality for a displacement ventilated room in summer [Volume 14, Issue 9, 2014, Pages 35-44]
  • Energy efficiency Modeling and analysis of fluidized bed dryer of Bandar Imam Petrochemical Complex for energy and exergy efficiency improvement [Volume 14, Issue 11, 2014, Pages 77-88]
  • Energy harvesting Investigating Energy Harvesting from Unimorph Trapezoidal Beam Vibrations Using Distributed Parameters Method [Volume 14, Issue 15, 2014, Pages 96-102]
  • Entropy Theoretical Model to investigate response of aluminum 6061 alloy under high strain rate loading [Volume 14, Issue 13, 2014, Pages 153-162]
  • Entropy Generation Effects of magnetic field on mixed convection heat transfer and entropy generation of Cu-water nanofluid in a trapezoidal enclosure [Volume 14, Issue 9, 2014, Pages 183-194]
  • Environmental test Fabrication and performance study of the radiative catalytic pad for flameless combustion of natural gas in different climate conditions [Volume 14, Issue 9, 2014, Pages 57-64]
  • Epikure F205 Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
  • Epikure TETA Studies on the Tensile and Flexural Properties of TETA-Cured Epoxy Resins Modified With Clay [Volume 14, Issue 6, 2014, Pages 29-34]
  • Epikure TETA Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
  • Epoxy Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams [Volume 14, Issue 2, 2014, Pages 47-54]
  • Epoxy Volume fraction and microballoon size effects on the compressive properties of epoxy/ceramic microballoon syntactic foam [Volume 14, Issue 4, 2014, Pages 37-44]
  • Epoxy Study of the structure and glass transition behavior of epoxy polymers using molecular dynamics [Volume 14, Issue 6, 2014, Pages 107-112]
  • Equal channel angular pressing Investigation on Performance of Ultra Fine Grained Pure Copper as Electrode during Electrical Discharge Machining [Volume 14, Issue 1, 2014, Pages 97-105]
  • Equation of state Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
  • Erosion Experimental study of the influence of material, size, angle and spraying pressure of sand on the erosive behavior of AISI H13 steel in core molding process [Volume 14, Issue 15, 2014, Pages 249-256]
  • Error in Pressure Tracking Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
  • Etvos Number Investigation of two bubble coalescence with large density differences with Lattice Boltzmann Method [Volume 14, Issue 10, 2014, Pages 93-100]
  • Euler angles Investigating the stability of automatic ball-balancer under the gyroscopic effect and optimization of its parameters using the Nelder-Mead simplex algorithm [Volume 14, Issue 14, 2014, Pages 155-166]
  • Euler-Bernoulli beam Optimum absorber design for beam subjected to a moving oscillator and effect of crack occurrence on absorber performance [Volume 14, Issue 13, 2014, Pages 163-171]
  • Euler-Lagrange Single Phase and Two Phase Analysis of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct under an Asymmetric Thermal Boundary Condition [Volume 14, Issue 13, 2014, Pages 47-58]
  • Exact analytical solution Exact solutions for free vibration of lévy-type rectangular nanoplates via nonlocal third-order plate theory [Volume 14, Issue 7, 2014, Pages 122-130]
  • Exact solution Nonlinear forced vibration analysis of functionally graded nanobeams in thermal environments with considering surface stress and nonlocal effects [Volume 14, Issue 16, 2014, Pages 17-26]
  • Exergy analysis Investigation of the effects of performance parameters on the flame behavior and temperature distribution and exergy analysis of low swirl premixed burners [Volume 14, Issue 14, 2014, Pages 27-38]
  • Exergy Destruction Exergy Analysis of the Adsorbent Bed in adsorption chillers [Volume 14, Issue 2, 2014, Pages 70-78]
  • Exergy efficiency Modeling and analysis of fluidized bed dryer of Bandar Imam Petrochemical Complex for energy and exergy efficiency improvement [Volume 14, Issue 11, 2014, Pages 77-88]
  • Experimental Fluids Dynamic A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
  • Experimental Modal Analysis Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
  • Experimental Setup Dynamic modeling of visco-elastic robotic manipulators using Timoshenko beam theory [Volume 14, Issue 1, 2014, Pages 131-139]
  • Experimental Study Experimental Investigation of Forced Convection of Nanofluids in a Horizontal Tube Filled with Porous medium [Volume 14, Issue 7, 2014, Pages 109-116]
  • Experimental Study Analysis of composite sandwich beam with enhanced nonlinear high order sandwich panel theory [Volume 14, Issue 16, 2014, Pages 1-8]
  • Experiment design The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
  • Explicit and Implicit Methods Development of Two Incompressible SPH methods to simulate sediment-laden free surface flows [Volume 14, Issue 12, 2014, Pages 91-103]
  • Explicit finite element method Explicit finite element modeling of impact loading on nanobeam to compare with Euler–Bernoulli and Timoshenko theory [Volume 14, Issue 13, 2014, Pages 259-264]
  • Explosive forming Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
  • Extended finite element method Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
  • Extended finite element method Simulation of crack initiation and propagation in hydraulic fracturing of oil wellbore by maximum principal stress criterion [Volume 14, Issue 5, 2014, Pages 164-174]
  • Extra pressure drop Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
  • Extrusion Development of a novel forward extrusion process for producing large-diameter tubes from small billets [Volume 14, Issue 14, 2014, Pages 143-147]
F
  • Failure Assessment Diagrams (FAD) Effects of surface crack length and depth variations on gas transmission pipeline safety [Volume 14, Issue 5, 2014, Pages 26-32]
  • Failure Mechanisms An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
  • Failure probability Application of cross-entropy method in multi limit-state reliability analysis [Volume 14, Issue 3, 2014, Pages 1-6]
  • Fatigue The roll of fatigue on optimal design of sport footwear [Volume 14, Issue 14, 2014, Pages 167-176]
  • Fatigue Analysis of Stress, Strain and Estimation of Fatigue Life of Amir Kabir Semi-Submersible Drilling Platform by using Hot Spot Method in Caspian Sea [Volume 14, Issue 15, 2014, Pages 345-351]
  • Fatigue Pareto discrete- continuous optimization of Sikorsky ASH-3D helicopter main gearbox [Volume 14, Issue 16, 2014, Pages 170-180]
  • Fatigue Life Fatigue life estimation of bolts in flanges of a reinforced cylindrical shell [Volume 14, Issue 13, 2014, Pages 201-208]
  • Fatigue Life Prediction of fatigue life of spot welding connections subjected to unidirectional dynamic shear load [Volume 14, Issue 15, 2014, Pages 361-368]
  • Fatigue test machine Prediction of fatigue life of spot welding connections subjected to unidirectional dynamic shear load [Volume 14, Issue 15, 2014, Pages 361-368]
  • Fault detection Application of a Simple Robust 2-D Pictorial-Geometrical Feature on QRS Complex Detection [Volume 14, Issue 7, 2014, Pages 117-121]
  • Fault detection Residual Generation in Linear Systems with Unmatched Uncertainties for Fault Detection Problems [Volume 14, Issue 7, 2014, Pages 191-198]
  • Fault detection Identification of broken needle in single jersey circular knitting machine using neural network on yarn fluctuations signals [Volume 14, Issue 16, 2014, Pages 339-348]
  • Fault Detection and Isolation Soft Sensor Design for Fault Detection in ALV Pitch Gyro [Volume 14, Issue 7, 2014, Pages 157-162]
  • Fault Tree Analysis (FTA) System design algorithm for mission oriented systems with reliability approach [Volume 14, Issue 13, 2014, Pages 7-18]
  • FEA Investigation on in-plane behavior of bare and foam-filled honeycombs in quasi-static and dynamic states by using numerical method [Volume 14, Issue 15, 2014, Pages 177-185]
  • FE Analysis Numerical simulation of thermal history in mold and casting during horizontal centrifugal casting of dutcile iron pipes [Volume 14, Issue 6, 2014, Pages 185-193]
  • Feature Extraction Application of a Simple Robust 2-D Pictorial-Geometrical Feature on QRS Complex Detection [Volume 14, Issue 7, 2014, Pages 117-121]
  • Feed Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming [Volume 14, Issue 1, 2014, Pages 89-96]
  • Feed rate control method Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
  • FEM Effect of placement and material properties of tibial plate on stress pattern at fractured site [Volume 14, Issue 11, 2014, Pages 159-165]
  • FEM Development of a novel forward extrusion process for producing large-diameter tubes from small billets [Volume 14, Issue 14, 2014, Pages 143-147]
  • FE Model Model updating of damped structures using SMURF technique [Volume 14, Issue 4, 2014, Pages 65-74]
  • FEM Simulation Experimental and numerical study of formability in stainless steel 304 tube by hydroforming process [Volume 14, Issue 13, 2014, Pages 224-232]
  • FGM Analysis of sandwich cylindrical shell with FGM core subjected to thermal shock [Volume 14, Issue 5, 2014, Pages 175-182]
  • Fiber reinforced composite Multiple Scattering of an Acoustic Wave from Fibers Encased in a Solid Viscoelastic Medium [Volume 14, Issue 15, 2014, Pages 423-430]
  • Filling percent Forming of metallic bipolar plate with pin-type pattern by using hydroforming process in convex die [Volume 14, Issue 10, 2014, Pages 150-158]
  • Film parameter Study on the Performance of Spur Gears in Mixed- Elastohydrodynamic Lubrication [Volume 14, Issue 7, 2014, Pages 10-16]
  • Film thickness of lubricant Prediction of Performance of Helical Gears Under Mixed- Lubrication Regime [Volume 14, Issue 10, 2014, Pages 167-176]
  • Finite cell method Using the finite cell method to predict ductile damage with crack closure effect [Volume 14, Issue 13, 2014, Pages 107-118]
  • Finite element Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods [Volume 14, Issue 11, 2014, Pages 1-8]
  • Finite element Prediction of fatigue life of spot welding connections subjected to unidirectional dynamic shear load [Volume 14, Issue 15, 2014, Pages 361-368]
  • Finite element Study of effective parameters of Parallel Tubular Channel Angular Pressing(PTCAP) [Volume 14, Issue 16, 2014, Pages 27-33]
  • Finite element analysis Study of Cross-coupling Effect in Piezo-flexural Nanopositioning Stages [Volume 14, Issue 2, 2014, Pages 1-8]
  • Finite element analysis Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
  • Finite element analysis Stability analysis of weight optimum waffle cylindrical shells -A new approach [Volume 14, Issue 14, 2014, Pages 177-184]
  • Finite element analysis Artificial tactile sensing capability in tumor detection of the liver tissue utilizing in vitro experimental data and hyperelastic finite element modeling [Volume 14, Issue 15, 2014, Pages 388-394]
  • Finite element model Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
  • Finite Element Modeling Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction [Volume 14, Issue 4, 2014, Pages 122-128]
  • Finite element simulation Experimental and numerical investigation of overload effects on fatigue life of AISI 4140 steel [Volume 14, Issue 4, 2014, Pages 54-64]
  • Finite element simulation Simulation and optimization of Tonpilz transducer by FEM and comparing the results with electroacoustic tests [Volume 14, Issue 10, 2014, Pages 63-70]
  • Finite element simulation Studying the stress-strain curve of C12200 Copper tube using hydraulic bulge test in T-shape die [Volume 14, Issue 13, 2014, Pages 95-106]
  • Finite element simulation Upper bound analyses of novel backward extrusion [Volume 14, Issue 15, 2014, Pages 369-376]
  • Finite element solution Buckling behavior investigation of grid stiffened composite conical shells under axial loading [Volume 14, Issue 15, 2014, Pages 170-176]
  • Finite strain Analysis of composite sandwich beam with enhanced nonlinear high order sandwich panel theory [Volume 14, Issue 16, 2014, Pages 1-8]
  • Finite volume method An analysis of hydrodynamics and noise behavior for submerged propeller in various conditions by experimental and numerical methods [Volume 14, Issue 5, 2014, Pages 15-25]
  • Fire Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
  • Fire lateral location Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
  • FIV Numerical Prediction of Vibration in Flexible Tube Bundles under Two Phase Cross Flow with HEM [Volume 14, Issue 15, 2014, Pages 155-169]
  • Flapping airfoil Study the Effects of Oscillation Frequency and Amplitude on Flow Around a Flapping Airfoil via an Improved Immersed Boundary Method [Volume 14, Issue 16, 2014, Pages 291-301]
  • Flapping wing Parametric study for kinematic optimization of flapping wing vehicle using a new aeroelastic model [Volume 14, Issue 9, 2014, Pages 73-80]
  • FLD Experimental and numerical study of formability in stainless steel 304 tube by hydroforming process [Volume 14, Issue 13, 2014, Pages 224-232]
  • Flexible link Theoretical and experimental investigation of dynamic load carrying capacity of flexible link manipulator in point-to-point motion [Volume 14, Issue 15, 2014, Pages 199-206]
  • Flexible roll forming Investigation of Web Warping of Profiles with Changing Cross Section in Flexible Roll Forming Process [Volume 14, Issue 6, 2014, Pages 72-80]
  • Flexible string method Quasi-Three-Dimensional Aerodynamic Design of S-shaped Air Intake Using Inverse Design Method [Volume 14, Issue 4, 2014, Pages 189-199]
  • Flexible Structure Vibration Control of a Flexible Structure by Reconstruction of Control Input Based on Estimation of Undesired Vibration Frequencies [Volume 14, Issue 1, 2014, Pages 197-202]
  • Flexural Behavior Pitch effect on flexural behavior of sandwich structure with composite skins and a corrugated combinatorial core with trapezoidal geometry [Volume 14, Issue 5, 2014, Pages 194-202]
  • Flow at low Reynolds numbers Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
  • Flow control Blowing and suction effect on drag and lift coefficients for viscous incompressible flows over hydrofoils by power-law preconditioning method [Volume 14, Issue 4, 2014, Pages 129-140]
  • Flow control Numerical study of flow characteristics around a NACA 4412 asymmetric airfoil under the influence of electric field [Volume 14, Issue 5, 2014, Pages 147-154]
  • Flow Diagram Experimental Study of Gas-Liquid Two-Phase Flow in the Consecutive Inclinations of a Large Bend [Volume 14, Issue 12, 2014, Pages 52-60]
  • Flow-Forming Production of Bilayer Al/St Tubes by Cold Spin Bonding and Investigation of Different Parameters on Bonding Strength of Layers [Volume 14, Issue 15, 2014, Pages 111-118]
  • Flow pattern Experimental investigation of the effect of hilly-terrain duct on gas-liquid flow [Volume 14, Issue 7, 2014, Pages 94-102]
  • Flow regime Numerical Simulation and Experimental Investigation of the Air-Water Two-Phase Flow Patterns inside a Ribbed Horizontal Duct [Volume 14, Issue 14, 2014, Pages 217-226]
  • Fluidization An experimental study of fluidization of solids particles in a bubbling fluidized bed [Volume 14, Issue 16, 2014, Pages 94-100]
  • Fluidized bed Modeling and analysis of fluidized bed dryer of Bandar Imam Petrochemical Complex for energy and exergy efficiency improvement [Volume 14, Issue 11, 2014, Pages 77-88]
  • Fluidized bed An experimental study of fluidization of solids particles in a bubbling fluidized bed [Volume 14, Issue 16, 2014, Pages 94-100]
  • Fluid Structure Interaction Relationship between Spinal fluid pressure and Cerebrospinal fluid pressure as an index for assessment of hydrocephalus non-communicating [Volume 14, Issue 13, 2014, Pages 308-314]
  • Fluid-Structure-Interaction Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction [Volume 14, Issue 4, 2014, Pages 122-128]
  • Fluid-Structure Interaction (FSI) Fluid-Structure Interaction in a patient-specific abdominal aortic aneurysm: Effects of wall material model and heterogeneity on risk of rupture [Volume 14, Issue 11, 2014, Pages 115-126]
  • Foam The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
  • Foam expansion A New method to reduce weight density by considering the mold design in injection molding process of thermoplastic structural foam [Volume 14, Issue 1, 2014, Pages 203-209]
  • Foam Injection Molding (FIM) A New method to reduce weight density by considering the mold design in injection molding process of thermoplastic structural foam [Volume 14, Issue 1, 2014, Pages 203-209]
  • Fokker Planck Equations Stability Analysis for Stochastic Piecewise Affine Systems with Verification via Generalized Fokker Planck Equations [Volume 14, Issue 16, 2014, Pages 243-251]
  • Force balance Design and fabrication of a force-moment measurement system for testing of the models in a water tunnel [Volume 14, Issue 14, 2014, Pages 291-298]
  • Forces-Angle Measure A Comparison of Two Online Tip-over Prevention Algorithms for Wheeled Mobile Manipulators [Volume 14, Issue 14, 2014, Pages 271-281]
  • Forming force Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming [Volume 14, Issue 1, 2014, Pages 89-96]
  • Forming force Design and Manufacture of Vibratory Forming Tool to Develop “Ultrasonic Vibration assisted Incremental Sheet Metal Forming” Process [Volume 14, Issue 11, 2014, Pages 68-76]
  • Forming force Investigation of Ultrasonic Assisted Incremental Sheet Metal Forming Process. [Volume 14, Issue 11, 2014, Pages 106-114]
  • Forming Limit Analytical Prediction of Limit Strains and Limit Stresses in Hydroforming of Anisotropic Aluminum Tubes [Volume 14, Issue 2, 2014, Pages 133-140]
  • Forming Limit Diagram Studying the stress-strain curve of C12200 Copper tube using hydraulic bulge test in T-shape die [Volume 14, Issue 13, 2014, Pages 95-106]
  • Forming Limit Diagram Numerical study of the effect of strain rate on damage prediction by dynamic forming limit diagram in high velocity sheet metal forming [Volume 14, Issue 16, 2014, Pages 212-222]
  • Forming of ship plates Experimental Test and Finite Element Analysis of Line Heating Method for Forming of Ship Hull Steel Plates [Volume 14, Issue 16, 2014, Pages 9-16]
  • Four-point bending test Fatigue lifetime and crack path prediction in four-point bending test of friction stir Cu-7075-T6 Aluminum alloy welded joints [Volume 14, Issue 8, 2014, Pages 193-198]
  • FPK Equation‎ Analytic Bifurcation Investigation of Cylindrical Shallow Shells under ‎Lateral Stochastic Excitation [Volume 14, Issue 7, 2014, Pages 77-84]
  • Fractional Calculus and Dynamics Identification of Lorenz chaotic system based on synchronization using fractional order calculus [Volume 14, Issue 7, 2014, Pages 68-76]
  • Fractional non-Fourier Contact Boundary Condition Estimation in Fractional Non-Fourier Heat Conduction Problem Using Conjugate Gradient Method without/with Adjoint Problem [Volume 14, Issue 6, 2014, Pages 22-28]
  • Fracture Numerical and experimental analyses of projectile penetration in grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 9, 2014, Pages 17-26]
  • Fracture Angle Numerical and experimental investigation of single point incremental forming of two layer sheet metals [Volume 14, Issue 14, 2014, Pages 1-8]
  • Fracture area Experimental study on Dynamic Response of grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 2, 2014, Pages 41-46]
  • Fracture mechanics Fatigue lifetime and crack path prediction in four-point bending test of friction stir Cu-7075-T6 Aluminum alloy welded joints [Volume 14, Issue 8, 2014, Pages 193-198]
  • Fracture toughness Determination of fracture toughness of heat treated AISI D2 steel using Finite Element and Acoustic Emission methods [Volume 14, Issue 11, 2014, Pages 1-8]
  • Free Convection The Effect of magnetic field on the natural Convection of a nanofluid in a Square enclosure with a membrane separator in the middle [Volume 14, Issue 5, 2014, Pages 111-120]
  • Free-Edges Effects Interlaminar stresses in symmetric cross-ply composite laminates using Layerwise theory [Volume 14, Issue 1, 2014, Pages 59-66]
  • Free form shell Shape optimization of free form shells under stress constraint [Volume 14, Issue 16, 2014, Pages 190-200]
  • Free Shear Layer Numerical study of the impact of the initial turbulent integral length scale on the dynamics of a two dimensional shear-free turbulent mixing layer [Volume 14, Issue 6, 2014, Pages 113-123]
  • Free supports An introduction of new polynomial functions for nonlinear vibration analysis of cracked rectangular plates involving free edges [Volume 14, Issue 15, 2014, Pages 24-32]
  • Free Surface Flow An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
  • Free vibration Exact solutions for free vibration of lévy-type rectangular nanoplates via nonlocal third-order plate theory [Volume 14, Issue 7, 2014, Pages 122-130]
  • Free vibration Free vibration analysis of bilayer graphenes with interlayer shear effect [Volume 14, Issue 7, 2014, Pages 131-138]
  • Free vibration Free vibration analysis of nanotube-reinforced composite truncated conical shell resting on elastic foundation [Volume 14, Issue 12, 2014, Pages 122-132]
  • Free vibration Free vibration of functionally graded rectangular nanoplates in thermal environment based on the modified couple stress theory [Volume 14, Issue 15, 2014, Pages 323-330]
  • Frequency Investigation of tool parameters effects on the formability of Al-1100 in incremental sheet metal hammering process [Volume 14, Issue 14, 2014, Pages 185-189]
  • Frequency Analysis Improvement of the vibrational behavior of the cross ply lamiated sandwich plate by smart elastomeric layer [Volume 14, Issue 11, 2014, Pages 47-58]
  • Frequency Analysis Frequency analysis of rectangular holed FG plates using three dimensional elasticity theory and meshless method [Volume 14, Issue 16, 2014, Pages 134-142]
  • Frequency Estimation Vibration Control of a Flexible Structure by Reconstruction of Control Input Based on Estimation of Undesired Vibration Frequencies [Volume 14, Issue 1, 2014, Pages 197-202]
  • Frequency Response Simulation and optimization of Tonpilz transducer by FEM and comparing the results with electroacoustic tests [Volume 14, Issue 10, 2014, Pages 63-70]
  • Frequency Response Static/Dynamic Instability and Nonlinear Vibrations of FG Plates Resting on Elastic Foundation under Parametric Forcing Excitation [Volume 14, Issue 13, 2014, Pages 172-182]
  • FRF Model updating of damped structures using SMURF technique [Volume 14, Issue 4, 2014, Pages 65-74]
  • Friction Study of Cross-coupling Effect in Piezo-flexural Nanopositioning Stages [Volume 14, Issue 2, 2014, Pages 1-8]
  • Friction Modeling of Friction In Micro/Nano scale with Random Roughness Distribution [Volume 14, Issue 11, 2014, Pages 175-184]
  • Frictional Contact Adaptive Slippage Control in a One-Finger Hand Robot Manipulation [Volume 14, Issue 13, 2014, Pages 297-307]
  • Friction coefficient Prediction of Performance of Helical Gears Under Mixed- Lubrication Regime [Volume 14, Issue 10, 2014, Pages 167-176]
  • Friction coefficient Study on the Performance of Spur Gears in Mixed- Elastohydrodynamic Lubrication [Volume 14, Issue 7, 2014, Pages 10-16]
  • Friction Stir Welding The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
  • Friction Stir Welding Fatigue lifetime and crack path prediction in four-point bending test of friction stir Cu-7075-T6 Aluminum alloy welded joints [Volume 14, Issue 8, 2014, Pages 193-198]
  • Friction Stir Welding Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6 [Volume 14, Issue 12, 2014, Pages 85-90]
  • Friction Stir Welding Study on joint zone Microstructure Evolution and Hardness in Friction Stir welding of AA1100 Aluminum alloy to A441 AISI steel [Volume 14, Issue 14, 2014, Pages 97-107]
  • Friction Stir Welding Investigation of Thermal, Mechanical and Microstructural Properties of 7000 Series Aluminum alloys Welding Using Friction Stir Welding process [Volume 14, Issue 14, 2014, Pages 148-154]
  • Friction Stir Welding Study on Frictional Heat Behavior and Material Flow during Friction Stir Welding Of AA1100 Aluminum Alloy [Volume 14, Issue 14, 2014, Pages 251-261]
  • FSW Investigation of Thermal, Mechanical and Microstructural Properties of 7000 Series Aluminum alloys Welding Using Friction Stir Welding process [Volume 14, Issue 14, 2014, Pages 148-154]
  • Fuel cell performance Effects of baffle-blocked flow cathode channel on reactant transport and cell performance of a PEMFC [Volume 14, Issue 4, 2014, Pages 158-166]
  • Fuel return line Offering a semi-analytical model to evaluate efficiency of PEM fuel cell system using ejector in fuel supply circuit [Volume 14, Issue 13, 2014, Pages 59-66]
  • Fully-clamped plate Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
  • FUNCTIONALLY GRADATED PIEZOELECTRIC MATERIAL Effect of functionally graded microstructure on dynamic stability of piezoelectric circular plates [Volume 14, Issue 1, 2014, Pages 140-148]
  • Functionally Graded Material Analysis of FGPM cylinder subjected to two dimensional electro thermo mechanical fields [Volume 14, Issue 4, 2014, Pages 83-90]
  • Functionally Graded Material Analytical Study of Elastic-Plastic Deformation of a Rotating Hollow FGM Cylinder [Volume 14, Issue 5, 2014, Pages 73-82]
  • Functionally Graded Material Static and free vibration analyses of functionally graded sandwich plates using three dimensional theory of elasticity [Volume 14, Issue 10, 2014, Pages 195-204]
  • Functionally Graded Material Temperature Distribution in a Hollow Cylinder Composed of Functionally Graded Material using Fractional Non-Fourier Single Phase Lag model [Volume 14, Issue 7, 2014, Pages 61-67]
  • Functionally Graded Material Free Vibration analysis of Functionally Graded Rectangular plates in contact with bounded fluid [Volume 14, Issue 8, 2014, Pages 165-173]
  • Functionally Graded Materials Non Linear Thermoelastic Analysis Of FGM Annular Rotating Discs With FSDT And TSDT Shear Deformation Plate Theories [Volume 14, Issue 1, 2014, Pages 175-188]
  • Functionally Graded Materials Multi-objective optimum design of an FG Al-SiC rotating disc with temperature dependent properties based on creep behavior [Volume 14, Issue 12, 2014, Pages 23-34]
  • Functionally Graded Materials An investigation into the three dimensional dynamic analysis and stress wave propagation in thick functionally graded plates under impact loading [Volume 14, Issue 11, 2014, Pages 89-96]
  • Functionally graded materials (FGMs) Onset yield analysis of rotating disks made of functionally graded materials using Tresca yield criterion [Volume 14, Issue 8, 2014, Pages 68-74]
  • Functionally graded materials (FGMs) Computation of dynamic stress intensity factors for three-dimensional cracks in functionally graded materials using interaction integral method [Volume 14, Issue 14, 2014, Pages 108-116]
  • Functionally Graded Nanobeam Nonlinear forced vibration analysis of functionally graded nanobeams in thermal environments with considering surface stress and nonlocal effects [Volume 14, Issue 16, 2014, Pages 17-26]
  • Functionally graded sandwich plates Nonlinear bending analysis of circular functionally graded sandwich plates [Volume 14, Issue 4, 2014, Pages 111-121]
  • Fung model Experimental measurement and modeling of nonlinear mechanical properties of the human saphenous vessel tissue by the tensile biaxial tests [Volume 14, Issue 13, 2014, Pages 1-6]
  • Fuzzy Control Optimal Fuzzy Controller Design for an Active Tripod Stable Platform Using Virtual Prototyping [Volume 14, Issue 1, 2014, Pages 168-174]
  • Fuzzy controller Safe path planning and control an Unmanned Underwater Vehicle (UUV) using particle swarm optimization and fuzzy logic control method [Volume 14, Issue 14, 2014, Pages 199-210]
  • Fuzzy Logic A Comparison of Two Online Tip-over Prevention Algorithms for Wheeled Mobile Manipulators [Volume 14, Issue 14, 2014, Pages 271-281]
  • Fuzzy-PI supervisory control Fuzzy control of a seismic shake table using a vision-based displacement measurement system [Volume 14, Issue 14, 2014, Pages 117-124]
  • Fuzzy set Theory An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
  • Fuzzy sliding mode control Design and Implementation of a Fuzzy Sliding Mode Control Law for a Wheeled Robot Towing a Trailer [Volume 14, Issue 4, 2014, Pages 91-98]
G
  • GA algorithms Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
  • Gait Disorder Rehabilitation Robots Control in Gait Training Exercises on a Treadmill [Volume 14, Issue 8, 2014, Pages 157-164]
  • Gait Rehabilitation Exercise Rehabilitation Robots Control in Gait Training Exercises on a Treadmill [Volume 14, Issue 8, 2014, Pages 157-164]
  • Galerkin method Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
  • Galerkin method Analytical solution for buckling of rectangular plates subjected to non-uniform in-plane loading based on first order shear deformation theory [Volume 14, Issue 13, 2014, Pages 37-46]
  • Gaseous dielectric Optimization of material removal rate in dry electro-discharge machining process 2 [Volume 14, Issue 12, 2014, Pages 113-121]
  • Gas lubricant Effects of Preload on Nonlinear Dynamic Behavior of Noncircular Aerodynamic Journal Bearing [Volume 14, Issue 16, 2014, Pages 45-56]
  • Gasoil spray An experimental study on the effect of synchronous combustion of gas- gasoil on luminosity and radiative heat transfer of natural gas flame [Volume 14, Issue 15, 2014, Pages 11-16]
  • Gasoline injection Experimental study of the effect of gasoline injection start position on cyclic variation of a single cylinder research SI engine [Volume 14, Issue 12, 2014, Pages 35-42]
  • Gas Transportation pipeline steel The use of hot torsion testing for determination of critical temperatures of API X65 steel [Volume 14, Issue 13, 2014, Pages 291-296]
  • GD&T Empirical study of dimensional and geometrical tolerances in helical milling of 4340 steel [Volume 14, Issue 15, 2014, Pages 119-126]
  • Gear Vibration control of gear-bearing dynamic system [Volume 14, Issue 6, 2014, Pages 135-143]
  • Gear Bifurcation and chaos control in a gear transmission [Volume 14, Issue 14, 2014, Pages 61-68]
  • Generalized differential quadrature method Nonlinear forced vibration of axially moving Timoshenko beam in thermal environment via the harmonic balance method [Volume 14, Issue 11, 2014, Pages 137-143]
  • GEO Two-objective Optimization of GEO Communication Satellite Trajectory Considering Impulsive Orbital Maneuver [Volume 14, Issue 5, 2014, Pages 121-128]
  • Geometrical Dimensions and Tolerances Compare and study of hole quality characteristics in helical milling and drilling [Volume 14, Issue 16, 2014, Pages 332-338]
  • Geostationary satellite Design of LQG/LTR controller for attitude control of geostationary satellite using reduced quaternion model [Volume 14, Issue 6, 2014, Pages 1-10]
  • Gibbs-Appell Dynamic modeling of visco-elastic robotic manipulators using Timoshenko beam theory [Volume 14, Issue 1, 2014, Pages 131-139]
  • Gibbs-Appell formulation Theoretical and experimental investigation of dynamic load carrying capacity of flexible link manipulator in point-to-point motion [Volume 14, Issue 15, 2014, Pages 199-206]
  • Glare Effects of nanoclay on the ballistic behavior of GLARE - Experimental and numerical investigation [Volume 14, Issue 7, 2014, Pages 43-51]
  • Glass transition temperature Study of the structure and glass transition behavior of epoxy polymers using molecular dynamics [Volume 14, Issue 6, 2014, Pages 107-112]
  • Glomeruli Numerical Analysis of Flow and Mass Transfer in the Renal Glomeruli Capillary Network [Volume 14, Issue 8, 2014, Pages 1-7]
  • GMDH-type neural network Parameter estimation of the GMDH-type neural network using UKF filter [Volume 14, Issue 15, 2014, Pages 59-66]
  • Graded honeycomb structure (GHS) Analytical and numerical study of energy absorption of graded honeycomb structure under in-plane impact [Volume 14, Issue 16, 2014, Pages 261-271]
  • Gradient methods Optimal layout design for a space control system modules using a gradient- based method [Volume 14, Issue 16, 2014, Pages 272-282]
  • Gradient warm deep drawing Investigation of process parameters in production of cylindrical parts by gradient warm deep drawing [Volume 14, Issue 10, 2014, Pages 187-194]
  • Grain burn-back Using marching cube algorithm for 3D grain burn-back analysis in Solid Rocket Motors based on level set method [Volume 14, Issue 15, 2014, Pages 85-95]
  • Grain size Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6 [Volume 14, Issue 12, 2014, Pages 85-90]
  • Granular medium Discrete element method to study the impact of different parameters on the screen performance [Volume 14, Issue 9, 2014, Pages 27-34]
  • Grey cast iron Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test [Volume 14, Issue 1, 2014, Pages 149-157]
  • Grey cast iron Investigation of machinability of green and sintered iron-jet milled cast iron powder metallurgy parts [Volume 14, Issue 11, 2014, Pages 59-67]
  • Grid composite Experimental study on Dynamic Response of grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 2, 2014, Pages 41-46]
  • Grid composite Numerical and experimental analyses of projectile penetration in grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 9, 2014, Pages 17-26]
  • Grid stiffened composite conical shell Buckling behavior investigation of grid stiffened composite conical shells under axial loading [Volume 14, Issue 15, 2014, Pages 170-176]
  • Grinding Grinding process investigation using creating scratch by an abrasive grit [Volume 14, Issue 13, 2014, Pages 245-250]
  • Groove Numerical Investigation of the Effect of Locating Groove on the Runner Cone of a Pump-Turbine on the Vortex Flow in the Draft Tube [Volume 14, Issue 15, 2014, Pages 352-360]
  • Ground Effect Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
  • GT-Power Software Modeling and Simulation of Combustion in SI Engines via Neural Networks and Investigation of Calibration and Data Acquisition in the GT-Power [Volume 14, Issue 13, 2014, Pages 233-244]
  • Guidance Performance investigation of control and guidance system for a spinning flight vehicle with dithering canard [Volume 14, Issue 7, 2014, Pages 169-175]
  • Gum arabic Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
  • Gyroscopic Effect Investigating the stability of automatic ball-balancer under the gyroscopic effect and optimization of its parameters using the Nelder-Mead simplex algorithm [Volume 14, Issue 14, 2014, Pages 155-166]
H
  • Hamilton's principle Vibro-acoustic study on transverse-isotropic thick-walled cylindrical shells considering high shear deformation theory using Hamilton principle [Volume 14, Issue 4, 2014, Pages 147-157]
  • Hardening model Experimental and numerical Study on accumulation of plastic strain of SS316L cantilevered cylindrical shells under cyclic bending and combined (bending-torsion) loads [Volume 14, Issue 15, 2014, Pages 42-50]
  • Hardware-in-the-Loop Design of a Real-time Simulator of the Engine-Generator for a Series Hybrid Electric Bus [Volume 14, Issue 4, 2014, Pages 200-206]
  • Harmonic balance method Nonlinear forced vibration of axially moving Timoshenko beam in thermal environment via the harmonic balance method [Volume 14, Issue 11, 2014, Pages 137-143]
  • Heat and moisture transfer Evaluation of Thermal and Moisture Inertia Effects in Clothing and Gagge’s Model Modification for Body Thermal Sensation and Physiological Responses Estimation [Volume 14, Issue 3, 2014, Pages 167-175]
  • Heat conduction Temperature Distribution in a Hollow Cylinder Composed of Functionally Graded Material using Fractional Non-Fourier Single Phase Lag model [Volume 14, Issue 7, 2014, Pages 61-67]
  • Heat flux estimation Kalman filter for estimating heat flux on moving-ablating- dispensing surface [Volume 14, Issue 1, 2014, Pages 10-18]
  • Heat pipe Multi objective optimization of heat pipe thermal performance while using aluminium oxide nanofluid [Volume 14, Issue 1, 2014, Pages 158-167]
  • Heat Transfer 2D Simulation of Catalytic Radiant Counter-Diffusive Burners [Volume 14, Issue 5, 2014, Pages 83-90]
  • Heat Transfer Numerical simulation of thermal history in mold and casting during horizontal centrifugal casting of dutcile iron pipes [Volume 14, Issue 6, 2014, Pages 185-193]
  • Heat Transfer Experimental Investigation of Forced Convection of Nanofluids in a Horizontal Tube Filled with Porous medium [Volume 14, Issue 7, 2014, Pages 109-116]
  • Heat Transfer Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
  • Heat Transfer Enhancement Experimental Study of Turbulent Layers with Different Obstacles to Stimulate Optimal Point Augmentation in Heat Transfer Coefficient [Volume 14, Issue 3, 2014, Pages 43-50]
  • Heat Treatment Experimental study of the influence of material, size, angle and spraying pressure of sand on the erosive behavior of AISI H13 steel in core molding process [Volume 14, Issue 15, 2014, Pages 249-256]
  • Helical gear Prediction of Performance of Helical Gears Under Mixed- Lubrication Regime [Volume 14, Issue 10, 2014, Pages 167-176]
  • Helical Milling Empirical study of dimensional and geometrical tolerances in helical milling of 4340 steel [Volume 14, Issue 15, 2014, Pages 119-126]
  • Helical Milling Compare and study of hole quality characteristics in helical milling and drilling [Volume 14, Issue 16, 2014, Pages 332-338]
  • Helicopter Gearbox Pareto discrete- continuous optimization of Sikorsky ASH-3D helicopter main gearbox [Volume 14, Issue 16, 2014, Pages 170-180]
  • HEM Numerical Prediction of Vibration in Flexible Tube Bundles under Two Phase Cross Flow with HEM [Volume 14, Issue 15, 2014, Pages 155-169]
  • High order sandwich panel theory Analysis of composite sandwich beam with enhanced nonlinear high order sandwich panel theory [Volume 14, Issue 16, 2014, Pages 1-8]
  • High-speed planning hull Drag Reduction in a High-Speed Planing Hull Using Tunnels [Volume 14, Issue 3, 2014, Pages 51-59]
  • High strain rate A comparative study between Johnson-Cook and PTW models in simulation of cold spray process [Volume 14, Issue 2, 2014, Pages 188-194]
  • High-velocity impact Analytical, experimental and numerical Investigation of Sandwich Panels made of Honeycomb Core subjected projectile impact [Volume 14, Issue 6, 2014, Pages 153-164]
  • High-velocity penetrators Studying the behavior of ceramic armors impacted by a 7.62-mm APM2 projectile [Volume 14, Issue 14, 2014, Pages 125-136]
  • Hill and valley configuration Experimental investigation of the effect of hilly-terrain duct on gas-liquid flow [Volume 14, Issue 7, 2014, Pages 94-102]
  • H-Infinity control Vibration control of gear-bearing dynamic system [Volume 14, Issue 6, 2014, Pages 135-143]
  • H infinityFilter Optimal Design of Mixed Kalman-H infinity Filter Using Multi-objective Optimization Method [Volume 14, Issue 2, 2014, Pages 128-132]
  • Holdup Experimental Investigation of Slug Initiation Dependency to Upstream Conditions of Two Phases in Long Horizontal Channels in Two-Fluid Flow [Volume 14, Issue 3, 2014, Pages 27-35]
  • Hole Drilling Investigation of Residual Stresses in Stress-Relieved Samples by Heat Treatment and Ultrasonic Methods Using Hole-Drilling Method [Volume 14, Issue 15, 2014, Pages 273-278]
  • Hole Quality Compare and study of hole quality characteristics in helical milling and drilling [Volume 14, Issue 16, 2014, Pages 332-338]
  • Homogeneous Cartesian jacobian matrix Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
  • Hopf Nonlinear analysis of resonance between the blade and rotor by the bifurcation equation and numerical method [Volume 14, Issue 12, 2014, Pages 43-51]
  • Horizontal centrifugal pipe casting Numerical simulation of thermal history in mold and casting during horizontal centrifugal casting of dutcile iron pipes [Volume 14, Issue 6, 2014, Pages 185-193]
  • Horizontal-tube falling-film evaporation Numerical simulation and thermohydraulic performance analysis of tube-bundle in Multi-effect distillation systems to investigate the risk of precipitation [Volume 14, Issue 15, 2014, Pages 145-154]
  • Hot spot stress Analysis of Stress, Strain and Estimation of Fatigue Life of Amir Kabir Semi-Submersible Drilling Platform by using Hot Spot Method in Caspian Sea [Volume 14, Issue 15, 2014, Pages 345-351]
  • Hybrid electric Design of a Real-time Simulator of the Engine-Generator for a Series Hybrid Electric Bus [Volume 14, Issue 4, 2014, Pages 200-206]
  • Hybrid electric Design and Implementation of a Model-in-the-Loop Simulator for Verification of the Vehicle Control Software in a Series Hybrid Electric Bus [Volume 14, Issue 12, 2014, Pages 13-22]
  • Hydraulic bulge test Studying the stress-strain curve of C12200 Copper tube using hydraulic bulge test in T-shape die [Volume 14, Issue 13, 2014, Pages 95-106]
  • Hydraulic Engine Mount Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction [Volume 14, Issue 4, 2014, Pages 122-128]
  • Hydraulic fracturing Simulation of crack initiation and propagation in hydraulic fracturing of oil wellbore by maximum principal stress criterion [Volume 14, Issue 5, 2014, Pages 164-174]
  • Hydraulic Hybrid Powertrain Feasibility study and design of hydraulic hybrid powertrain system for a refuse truck [Volume 14, Issue 15, 2014, Pages 307-315]
  • Hydrobending A novel technique for Push bending of thin walled tubes in hydrobending [Volume 14, Issue 12, 2014, Pages 190-198]
  • Hydrodynamic loads Analysis of Stress, Strain and Estimation of Fatigue Life of Amir Kabir Semi-Submersible Drilling Platform by using Hot Spot Method in Caspian Sea [Volume 14, Issue 15, 2014, Pages 345-351]
  • Hydroforming Forming of metallic bipolar plate with pin-type pattern by using hydroforming process in convex die [Volume 14, Issue 10, 2014, Pages 150-158]
  • Hydroforming The Study of effective parameters in hydroforming of fuel cell metallic bipolar plates with parallel serpentine flow field [Volume 14, Issue 8, 2014, Pages 17-27]
  • Hyperelasticity Artificial tactile sensing capability in tumor detection of the liver tissue utilizing in vitro experimental data and hyperelastic finite element modeling [Volume 14, Issue 15, 2014, Pages 388-394]
  • Hypersingularity Analysis of mode III in infinite plane with multiple cracks based on strain gradient elasticity [Volume 14, Issue 7, 2014, Pages 139-149]
  • Hysteresis Identification hysteresis behavior of hydraulic proportional relief valve by the generalized prandtl – ishlinskii model [Volume 14, Issue 9, 2014, Pages 125-132]
I
  • Identical Synchronization Identification of Lorenz chaotic system based on synchronization using fractional order calculus [Volume 14, Issue 7, 2014, Pages 68-76]
  • Identification Identifying two regular interfacial boundary configurations and simultaneously estimation of mechanical properties using Imperialist competitive Algorithm and Simplex method [Volume 14, Issue 10, 2014, Pages 71-79]
  • Ignition-Extinction Repetitive Dynamic Dynamics of lean hydrogen/air flame regimes in micro scale combustion [Volume 14, Issue 3, 2014, Pages 94-102]
  • Image processing Fuzzy control of a seismic shake table using a vision-based displacement measurement system [Volume 14, Issue 14, 2014, Pages 117-124]
  • Immersed Boundary Method Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
  • Immersed Boundary Method Study the Effects of Oscillation Frequency and Amplitude on Flow Around a Flapping Airfoil via an Improved Immersed Boundary Method [Volume 14, Issue 16, 2014, Pages 291-301]
  • Impact Response of fully-clamped composite laminated plate subjected to low-velocity impact by using Galerkin method [Volume 14, Issue 1, 2014, Pages 45-50]
  • Impact Experimental investigation of effects of nanoclay on ballistic properties of GLARE [Volume 14, Issue 4, 2014, Pages 141-146]
  • Impact An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
  • Impact Optimal selection of parameters of a hybrid model of vehicle/passenger for prediction of head injury in front crash [Volume 14, Issue 15, 2014, Pages 67-74]
  • Impact energies An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
  • Impact Loading An investigation into the three dimensional dynamic analysis and stress wave propagation in thick functionally graded plates under impact loading [Volume 14, Issue 11, 2014, Pages 89-96]
  • Impactor shape Effect of impactor shape and temperature on the behavior of E-glass/epoxy composite laminates [Volume 14, Issue 10, 2014, Pages 1-8]
  • Impedance Control Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
  • Implicit Method An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
  • Improved High Order Sandwich Panel Theory Single-objective and multi-objective optimization of curved sandwich panel with magneto-rheological fluid core using genetic algorithm [Volume 14, Issue 15, 2014, Pages 414-422]
  • Improved Sensitivity-free Probability Analysis Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
  • Impulsive maneuver Two-objective Optimization of GEO Communication Satellite Trajectory Considering Impulsive Orbital Maneuver [Volume 14, Issue 5, 2014, Pages 121-128]
  • Inamuro Model Investigation of two bubble coalescence with large density differences with Lattice Boltzmann Method [Volume 14, Issue 10, 2014, Pages 93-100]
  • Inclined channel Experimental Study of Gas-Liquid Two-Phase Flow in the Consecutive Inclinations of a Large Bend [Volume 14, Issue 12, 2014, Pages 52-60]
  • Inclined channel Experimental study of length, velocity and frequency of taylor bubbles in gas-liquid two-phase flow in a large bend [Volume 14, Issue 12, 2014, Pages 133-144]
  • Inclined channel Numerical Simulation and Investigation of Bubble Velocity and Deformation in Inclined Channel with Two Consecutive Slopes Using VOF-PLIC Method [Volume 14, Issue 11, 2014, Pages 29-36]
  • Incompressible Flow An Implicit Incompressible SPH Method for Free Surface Flow Problems [Volume 14, Issue 4, 2014, Pages 99-110]
  • Incompressible SPH Flow Development of Two Incompressible SPH methods to simulate sediment-laden free surface flows [Volume 14, Issue 12, 2014, Pages 91-103]
  • Inconel 625 Characterization of microstructural and mechanical properties of Inconel 625/A517 high strength quenched and tempered steel dissimilar welds [Volume 14, Issue 15, 2014, Pages 331-336]
  • Incremental forming Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming [Volume 14, Issue 1, 2014, Pages 89-96]
  • Incremental forming Design and Manufacture of Vibratory Forming Tool to Develop “Ultrasonic Vibration assisted Incremental Sheet Metal Forming” Process [Volume 14, Issue 11, 2014, Pages 68-76]
  • Incremental forming Investigation of tool parameters effects on the formability of Al-1100 in incremental sheet metal hammering process [Volume 14, Issue 14, 2014, Pages 185-189]
  • Incremental sheet metal forming Numerical and Experimental Investigation of Incremental Sheet Metal Forming Parameters and Multi-objective Optimization Using Neural-genetic Algorithm [Volume 14, Issue 2, 2014, Pages 167-174]
  • Incremental sheet metal forming Investigation of Ultrasonic Assisted Incremental Sheet Metal Forming Process. [Volume 14, Issue 11, 2014, Pages 106-114]
  • Indoor Air Quality Investigating the effect of supply air temperature on thermal comfort and indoor air quality for a displacement ventilated room in summer [Volume 14, Issue 9, 2014, Pages 35-44]
  • Indoor Air Quality Investigating the effect of return air vent height on energy consumption, thermal comfort, and air quality in under floor air distribution system [Volume 14, Issue 16, 2014, Pages 125-133]
  • Inertia coefficient On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
  • Inlet and outlet ports Mixed convection in a trapezoidal enclosure filled with Cu-water nanofluid [Volume 14, Issue 6, 2014, Pages 41-51]
  • Inlet Superficial Velocity Slug Frequency Evaluation in Long Horizontal Channel by Experimental Method [Volume 14, Issue 2, 2014, Pages 141-149]
  • Inlet Velocity Experimental Investigation of Slug Initiation Dependency to Upstream Conditions of Two Phases in Long Horizontal Channels in Two-Fluid Flow [Volume 14, Issue 3, 2014, Pages 27-35]
  • In plane behavior Investigation on in-plane behavior of bare and foam-filled honeycombs in quasi-static and dynamic states by using numerical method [Volume 14, Issue 15, 2014, Pages 177-185]
  • In-plane impact load Analytical and numerical study of energy absorption of graded honeycomb structure under in-plane impact [Volume 14, Issue 16, 2014, Pages 261-271]
  • In-plane load 2D Curved plate Non-linear vibration and Aeroelastic analysis with in-plane and Supersonic Aerodynamic load in Time domain [Volume 14, Issue 15, 2014, Pages 405-413]
  • Input Reconstruction Vibration Control of a Flexible Structure by Reconstruction of Control Input Based on Estimation of Undesired Vibration Frequencies [Volume 14, Issue 1, 2014, Pages 197-202]
  • Intake withdrawal direction Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
  • Integrated solar combined cycle Solar Field Thermo-economical optimization of Yazd Integrated Solar Combined Cycle (ISCC) [Volume 14, Issue 2, 2014, Pages 117-127]
  • Interaction integral method Computation of dynamic stress intensity factors for three-dimensional cracks in functionally graded materials using interaction integral method [Volume 14, Issue 14, 2014, Pages 108-116]
  • Interlaminar fracture toughness Investigation of delamination and interlaminar fracture toughness assessment of Glass/Epoxy composite by acoustic emission [Volume 14, Issue 4, 2014, Pages 1-11]
  • Interlaminar stresses Interlaminar stresses in symmetric cross-ply composite laminates using Layerwise theory [Volume 14, Issue 1, 2014, Pages 59-66]
  • Interlayer shear Free vibration analysis of bilayer graphenes with interlayer shear effect [Volume 14, Issue 7, 2014, Pages 131-138]
  • Internal Heat Exchanger Energy and exergy analysis of Organic Rankine Cycle with using two-component working fluid in specified heat source conditions [Volume 14, Issue 3, 2014, Pages 145-156]
  • Internal Heat Generation Porous Matrix properties effect on the internal heat generation in a square cavity saturated with Cu-Water nanofluid [Volume 14, Issue 16, 2014, Pages 34-44]
  • Interstitial fluid flow A simultaneously solution of interstitial fluid flow in tumor tissue and blood flow in remodeled microvascular network induced by tumor [Volume 14, Issue 9, 2014, Pages 1-9]
  • Inverse Design Quasi-Three-Dimensional Aerodynamic Design of S-shaped Air Intake Using Inverse Design Method [Volume 14, Issue 4, 2014, Pages 189-199]
  • Inverse Dynamics Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
  • Inverse heat transfer Kalman filter for estimating heat flux on moving-ablating- dispensing surface [Volume 14, Issue 1, 2014, Pages 10-18]
  • Inverse Kinematics Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
  • Inverted Pendulum Optimal state estimation of a dynamical system corrupted with colored noises using Mixed Kalman/H-infinity filter [Volume 14, Issue 12, 2014, Pages 67-74]
  • Iron-nickel-base superalloy Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology [Volume 14, Issue 15, 2014, Pages 51-58]
  • ISO 3800 Fatigue life estimation of bolts in flanges of a reinforced cylindrical shell [Volume 14, Issue 13, 2014, Pages 201-208]
  • Iterative algorithm Geometric Model Segmentation using Approximate Voronoi Diagram and Fuzzy regions construction [Volume 14, Issue 15, 2014, Pages 127-136]
J
  • Jacobian matrix A comparative study on the manipulability index of RRR planar manipulators [Volume 14, Issue 14, 2014, Pages 299-308]
  • Jameson’s method Optimization of CUSP Technique Using Inverse Modeling for Improvement of Jameson’s 2-D Finite Volume Method [Volume 14, Issue 8, 2014, Pages 174-182]
  • Jet milling Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test [Volume 14, Issue 1, 2014, Pages 149-157]
  • Jet milling Investigation of machinability of green and sintered iron-jet milled cast iron powder metallurgy parts [Volume 14, Issue 11, 2014, Pages 59-67]
  • Joint Clearance Analyze of lubricant effect on stabilizing the dynamic behavior of slider- crank mechanism with revolute joint clearance [Volume 14, Issue 15, 2014, Pages 377-387]
K
  • Kalman filter Kalman filter for estimating heat flux on moving-ablating- dispensing surface [Volume 14, Issue 1, 2014, Pages 10-18]
  • Kalman filter Optimal Design of Mixed Kalman-H infinity Filter Using Multi-objective Optimization Method [Volume 14, Issue 2, 2014, Pages 128-132]
  • Kalman filter Dynamic modeling, simulation and control of a quadrotor using MEMS sensors’ experimental data [Volume 14, Issue 3, 2014, Pages 176-184]
  • Kalman filter Active vibration isolation using 6DOF Stewart platform: An experimental study [Volume 14, Issue 14, 2014, Pages 89-96]
  • Kelvin-Voigt Dynamic modeling of visco-elastic robotic manipulators using Timoshenko beam theory [Volume 14, Issue 1, 2014, Pages 131-139]
  • Keywords Severe Plastic Deformation Study of effective parameters of Parallel Tubular Channel Angular Pressing(PTCAP) [Volume 14, Issue 16, 2014, Pages 27-33]
  • Kinematic Title: Design and analysis of workspace and singularity of a 4 degree of freedom parallel robot [Volume 14, Issue 8, 2014, Pages 28-36]
  • Kinematic optimization Joint Space Kinematic Optimization of the Dual-Arm Cam-Lock Robot [Volume 14, Issue 11, 2014, Pages 127-136]
  • Kinematic Sensitivity Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
  • Kinetic energy contours Study the Effects of Oscillation Frequency and Amplitude on Flow Around a Flapping Airfoil via an Improved Immersed Boundary Method [Volume 14, Issue 16, 2014, Pages 291-301]
L
  • Lagrangian Approach Inverse Dynamic Problem of Two Parallel Manipulators with Identical Limbs Structures [Volume 14, Issue 13, 2014, Pages 281-290]
  • Laminated Composite Plates Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
  • Laminated Composite Plates Power Sound Transmission through Double-Walled Laminated Composite Panel with Intermediate Porous Layer Considering Different Boundary Conditions [Volume 14, Issue 6, 2014, Pages 11-21]
  • Large Eddy Simulation Numerical Investigation on Damage Patterns of Low Swirl Translating Tornadoes [Volume 14, Issue 6, 2014, Pages 81-90]
  • Laser Forming Process Effects of process parameters on bending magnitude in laser forming and determine an equation to predict bending angle [Volume 14, Issue 8, 2014, Pages 75-82]
  • Lattice Boltzmann Method Investigation of two bubble coalescence with large density differences with Lattice Boltzmann Method [Volume 14, Issue 10, 2014, Pages 93-100]
  • Lattice Boltzmann Method Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
  • Lattice conical Structure Simple method for buckling load of composite conical Lattice structures under axial load [Volume 14, Issue 15, 2014, Pages 290-298]
  • Layerwise Theory Interlaminar stresses in symmetric cross-ply composite laminates using Layerwise theory [Volume 14, Issue 1, 2014, Pages 59-66]
  • LBW Characterization of microstructural and mechanical properties of Inconel 625/A517 high strength quenched and tempered steel dissimilar welds [Volume 14, Issue 15, 2014, Pages 331-336]
  • Length scale parameter Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
  • Level set Using marching cube algorithm for 3D grain burn-back analysis in Solid Rocket Motors based on level set method [Volume 14, Issue 15, 2014, Pages 85-95]
  • Lift and Pressure Drag Coefficients Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
  • Lift Coefficient Blowing and suction effect on drag and lift coefficients for viscous incompressible flows over hydrofoils by power-law preconditioning method [Volume 14, Issue 4, 2014, Pages 129-140]
  • Lifting Force Making and Analyzing Dynamical Prototypes of Bird-Like Wings [Volume 14, Issue 15, 2014, Pages 17-23]
  • Limit drawing ratio Investigation of process parameters in production of cylindrical parts by gradient warm deep drawing [Volume 14, Issue 10, 2014, Pages 187-194]
  • Linear elastic fracture mechanics Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
  • Linear matrix inequalities Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
  • Linear Matrix Inequality approach Investigation of the Stability of Electro Hydraulic Servo System using Fuzzy Intelligent Controller [Volume 14, Issue 3, 2014, Pages 36-42]
  • Line heating method Experimental Test and Finite Element Analysis of Line Heating Method for Forming of Ship Hull Steel Plates [Volume 14, Issue 16, 2014, Pages 9-16]
  • Liquid Propellant Rocket Engine Mathematical and Numerical Modeling along with the Stability Analysis of Liquid Propellant Rocket Engine Cut-off Valve [Volume 14, Issue 8, 2014, Pages 95-102]
  • Lloyd clustering Geometric Model Segmentation using Approximate Voronoi Diagram and Fuzzy regions construction [Volume 14, Issue 15, 2014, Pages 127-136]
  • Load-sharing concept Study on the Performance of Spur Gears in Mixed- Elastohydrodynamic Lubrication [Volume 14, Issue 7, 2014, Pages 10-16]
  • Lofting Construction of smooth B-spline surfaces based on improving data point distribution [Volume 14, Issue 13, 2014, Pages 27-36]
  • Long Horizontal Channel Slug Frequency Evaluation in Long Horizontal Channel by Experimental Method [Volume 14, Issue 2, 2014, Pages 141-149]
  • Long Horizontal Channel Experimental Investigation of Slug Initiation Dependency to Upstream Conditions of Two Phases in Long Horizontal Channels in Two-Fluid Flow [Volume 14, Issue 3, 2014, Pages 27-35]
  • Longitudinal Dynamic Derivative Longitudinal Dynamic Derivatives of an Airfoil under Pitching and Plunging Oscillations in Wind Tunnel [Volume 14, Issue 10, 2014, Pages 159-166]
  • Longitudinal Velocity Estimation of Vehicle Vehicle Longitudinal Velocity Estimation Using two New Estimators and without Measuring the Braking Torque [Volume 14, Issue 5, 2014, Pages 183-193]
  • Lorentz Force Numerical analysis of thermodynamic behavior of an MHD micropump by simultaneously changing the length of electric and magnetic fields [Volume 14, Issue 6, 2014, Pages 91-98]
  • Low-Density Lipoprotein Blood pulsatile effect on LDL mass transport in a multilayered carotid artery with atherosclerotic plaques [Volume 14, Issue 7, 2014, Pages 17-26]
  • Low Density Lipoprotein (LDL) Investigation of Effective Parameters on Accumulation of Low-Density Lipoproteins based on the Multilayer Wall of the Carotid Artery [Volume 14, Issue 4, 2014, Pages 27-36]
  • LQG/LTR Design of LQG/LTR controller for attitude control of geostationary satellite using reduced quaternion model [Volume 14, Issue 6, 2014, Pages 1-10]
  • Lubrication Prediction of Performance of Helical Gears Under Mixed- Lubrication Regime [Volume 14, Issue 10, 2014, Pages 167-176]
M
  • Machinability Investigation of machinability of green and sintered iron-jet milled cast iron powder metallurgy parts [Volume 14, Issue 11, 2014, Pages 59-67]
  • Machining force Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
  • Mach reflection Numerical investigation of formation of Mach reflection in explosive free forming of confined cylindrical shells [Volume 14, Issue 13, 2014, Pages 131-142]
  • Magnetic Field Numerical study of effective techniques to increase mixed convection heat transfer rate within the enclosure subjected to magnetic field [Volume 14, Issue 3, 2014, Pages 69-77]
  • Magnetic Field The Effect of magnetic field on the natural Convection of a nanofluid in a Square enclosure with a membrane separator in the middle [Volume 14, Issue 5, 2014, Pages 111-120]
  • Magnetic Field Effects of magnetic field on mixed convection heat transfer and entropy generation of Cu-water nanofluid in a trapezoidal enclosure [Volume 14, Issue 9, 2014, Pages 183-194]
  • Magnetic Field Magnetic field effect on nanofluid water-cu natural convection in an inclined T shape cavity [Volume 14, Issue 12, 2014, Pages 179-189]
  • Magnetic-field length Numerical analysis of thermodynamic behavior of an MHD micropump by simultaneously changing the length of electric and magnetic fields [Volume 14, Issue 6, 2014, Pages 91-98]
  • Magnetic flux Numerical analysis of a magnetohydrodynamic micropump performance [Volume 14, Issue 13, 2014, Pages 251-258]
  • Magnetohydrodynamic Numerical analysis of a magnetohydrodynamic micropump performance [Volume 14, Issue 13, 2014, Pages 251-258]
  • Magneto-Rheological Single-objective and multi-objective optimization of curved sandwich panel with magneto-rheological fluid core using genetic algorithm [Volume 14, Issue 15, 2014, Pages 414-422]
  • Magnetorheological elastomer (MRE) Improvement of the vibrational behavior of the cross ply lamiated sandwich plate by smart elastomeric layer [Volume 14, Issue 11, 2014, Pages 47-58]
  • Magneto-Rheological Engine Mount Simulation and Experimental Evaluation of a Magneto-Rheological Hydraulic Engine Mount [Volume 14, Issue 10, 2014, Pages 43-49]
  • Magneto Rheological Fluid Study On the Transiant State behavior of Magneto Rheological Fluid in Magnetic Coupling [Volume 14, Issue 12, 2014, Pages 156-162]
  • Magneto Rheological material Free vibration and Low velocity impact Analysis of sandwich plates with Smart Flexible cores [Volume 14, Issue 13, 2014, Pages 191-200]
  • Manipulability Index A comparative study on the manipulability index of RRR planar manipulators [Volume 14, Issue 14, 2014, Pages 299-308]
  • Manipulation Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
  • Markov Analysis System design algorithm for mission oriented systems with reliability approach [Volume 14, Issue 13, 2014, Pages 7-18]
  • Marquardt-Levenberg inverse method Optimization of CUSP Technique Using Inverse Modeling for Improvement of Jameson’s 2-D Finite Volume Method [Volume 14, Issue 8, 2014, Pages 174-182]
  • Mass center Optimal layout design for a space control system modules using a gradient- based method [Volume 14, Issue 16, 2014, Pages 272-282]
  • Mass-loading Effect of Accelerometer Estimation of natural frequencies using mass-cancellation method in operational modal testing [Volume 14, Issue 8, 2014, Pages 183-192]
  • Mass-Spring Model Non-linear behavior Simulation of the drying of weft knitted fabric by using mass- spring-damper model and straight forward expansion [Volume 14, Issue 1, 2014, Pages 123-130]
  • Mass transport Investigation of Effective Parameters on Accumulation of Low-Density Lipoproteins based on the Multilayer Wall of the Carotid Artery [Volume 14, Issue 4, 2014, Pages 27-36]
  • Material flow Study on Frictional Heat Behavior and Material Flow during Friction Stir Welding Of AA1100 Aluminum Alloy [Volume 14, Issue 14, 2014, Pages 251-261]
  • Material Removal Rate Experimental study of the near dry EDM process [Volume 14, Issue 1, 2014, Pages 106-112]
  • Maxwell model Study On the Transiant State behavior of Magneto Rheological Fluid in Magnetic Coupling [Volume 14, Issue 12, 2014, Pages 156-162]
  • Mechanical Cross-coupling Study of Cross-coupling Effect in Piezo-flexural Nanopositioning Stages [Volume 14, Issue 2, 2014, Pages 1-8]
  • Mechanical properties Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams [Volume 14, Issue 2, 2014, Pages 47-54]
  • Mechanical properties The microstructure and mechanical properties of friction stir welded 7075-T6 aluminum alloy by the use of Design of Experiment [Volume 14, Issue 3, 2014, Pages 17-26]
  • Mechanical properties Mechanical and thermal properties of nanocomposites based on polypropylene/linear low density polyethylene/titanium dioxide [Volume 14, Issue 3, 2014, Pages 103-109]
  • Mechanical properties Studies on the Tensile and Flexural Properties of TETA-Cured Epoxy Resins Modified With Clay [Volume 14, Issue 6, 2014, Pages 29-34]
  • Mechanical properties Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
  • Mechanical properties Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles [Volume 14, Issue 7, 2014, Pages 103-108]
  • Mechanical properties Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical simulation [Volume 14, Issue 7, 2014, Pages 183-190]
  • Mechanical properties Qualitative Evaluation of Mechanical Properties of TiAlN Nanostructured Coatings Deposited on Cutting Tools by Analysis of XRD Results [Volume 14, Issue 12, 2014, Pages 61-66]
  • Mechanical properties A model for investigation of damaged zone mechanical properties in crack tip vicinity of orthotropic materials [Volume 14, Issue 14, 2014, Pages 69-78]
  • Mechanical properties Investigation of Thermal, Mechanical and Microstructural Properties of 7000 Series Aluminum alloys Welding Using Friction Stir Welding process [Volume 14, Issue 14, 2014, Pages 148-154]
  • Mechanical properties Microstructure, Mechanical and Electrical Properties of Commercially Pure Copper Deformed Severely by Equal Channel Angular Pressing [Volume 14, Issue 15, 2014, Pages 257-266]
  • Mechanical properties Characterization of microstructural and mechanical properties of Inconel 625/A517 high strength quenched and tempered steel dissimilar welds [Volume 14, Issue 15, 2014, Pages 331-336]
  • Mechanical properties Experimental investigation of nanoclay and nanosilica particles effects on mechanical properties of glass epoxy composites [Volume 14, Issue 16, 2014, Pages 76-82]
  • Mechanical property Experimental investigation of effects of nanoclay on ballistic properties of GLARE [Volume 14, Issue 4, 2014, Pages 141-146]
  • Mechanism Multi-objective optimum design of gripper mechanism using uniform diversity differential evolution [Volume 14, Issue 11, 2014, Pages 204-208]
  • Mechanism design Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
  • Melting Rate Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace [Volume 14, Issue 16, 2014, Pages 252-260]
  • MEMS Effect of fluid media on vibration of a microbeam resonator using micropolar theory [Volume 14, Issue 10, 2014, Pages 205-210]
  • MEMS Presenting a size-dependent electro-mechanical model for rectangular plates-based resonant micro-sensors based on modified couple stress theory [Volume 14, Issue 8, 2014, Pages 121-130]
  • MEMS Pressure sensor Modelling and empirical investigation of micro-electro-mechanical piezo-resisitive pressure sensor based on the requirements of petrochemical industry [Volume 14, Issue 16, 2014, Pages 349-357]
  • MEMS Sensor Dynamic modeling, simulation and control of a quadrotor using MEMS sensors’ experimental data [Volume 14, Issue 3, 2014, Pages 176-184]
  • MEMS Sensors Active vibration isolation using 6DOF Stewart platform: An experimental study [Volume 14, Issue 14, 2014, Pages 89-96]
  • Meshless method Node enrichment-moving error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method for solution of elasticity problems [Volume 14, Issue 3, 2014, Pages 194-202]
  • Meshless method Frequency analysis of rectangular holed FG plates using three dimensional elasticity theory and meshless method [Volume 14, Issue 16, 2014, Pages 134-142]
  • Mesh segmentation Geometric Model Segmentation using Approximate Voronoi Diagram and Fuzzy regions construction [Volume 14, Issue 15, 2014, Pages 127-136]
  • Mesoporous silica The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
  • Mesostructure Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
  • Metal bipolar plates Forming of metallic bipolar plate with pin-type pattern by using hydroforming process in convex die [Volume 14, Issue 10, 2014, Pages 150-158]
  • Metal foams Geometrical modeling of closed-cell metal foams using Stochastic cells generation [Volume 14, Issue 3, 2014, Pages 129-135]
  • Metal Forming The Study of effective parameters in hydroforming of fuel cell metallic bipolar plates with parallel serpentine flow field [Volume 14, Issue 8, 2014, Pages 17-27]
  • Metallic bipolar plate The Study of effective parameters in hydroforming of fuel cell metallic bipolar plates with parallel serpentine flow field [Volume 14, Issue 8, 2014, Pages 17-27]
  • Metallurgical properties Investigation of Thermal, Mechanical and Microstructural Properties of 7000 Series Aluminum alloys Welding Using Friction Stir Welding process [Volume 14, Issue 14, 2014, Pages 148-154]
  • Metal pieces Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
  • Metal Removal Grinding process investigation using creating scratch by an abrasive grit [Volume 14, Issue 13, 2014, Pages 245-250]
  • MHD micropump Numerical analysis of thermodynamic behavior of an MHD micropump by simultaneously changing the length of electric and magnetic fields [Volume 14, Issue 6, 2014, Pages 91-98]
  • Microbeam Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
  • Micro-hardness Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6 [Volume 14, Issue 12, 2014, Pages 85-90]
  • Micro hydro power plant Numerical and experimental study of the effects of physical and the geometrical parameters on efficiency of a Micro-Pelton Turbine [Volume 14, Issue 2, 2014, Pages 150-158]
  • Micromechanical model A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method [Volume 14, Issue 6, 2014, Pages 175-184]
  • Micromechanical Rectangular-plate Resonator Modeling and calculating the anchor loss quality factor in the plunging-mode vibrations of a micromechanical rectangular-plate resonator with two T-shaped support beams [Volume 14, Issue 12, 2014, Pages 75-84]
  • Micro-Pelton Turbine Numerical and experimental study of the effects of physical and the geometrical parameters on efficiency of a Micro-Pelton Turbine [Volume 14, Issue 2, 2014, Pages 150-158]
  • Microplane Model Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
  • Micro-polar theory Effect of fluid media on vibration of a microbeam resonator using micropolar theory [Volume 14, Issue 10, 2014, Pages 205-210]
  • Micropump Numerical analysis of a magnetohydrodynamic micropump performance [Volume 14, Issue 13, 2014, Pages 251-258]
  • Microscopic structure Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical simulation [Volume 14, Issue 7, 2014, Pages 183-190]
  • Microstructure Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing [Volume 14, Issue 14, 2014, Pages 235-244]
  • Minimum fluidization velocity An experimental study of fluidization of solids particles in a bubbling fluidized bed [Volume 14, Issue 16, 2014, Pages 94-100]
  • Minimum Quantity Lubricant Effect of cutting fluid application on surface roughness in hard milling of 4340-alloyed steel [Volume 14, Issue 14, 2014, Pages 50-60]
  • Minimum Quantity Lubrication (MQL) Experimental investigation of the effects of machining parameters and lubrication on consumed power and surface roughness in CK45 steel milling [Volume 14, Issue 10, 2014, Pages 80-84]
  • Mixed convection Mixed convection in a trapezoidal enclosure filled with Cu-water nanofluid [Volume 14, Issue 6, 2014, Pages 41-51]
  • Mixed convection Single Phase and Two Phase Analysis of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct under an Asymmetric Thermal Boundary Condition [Volume 14, Issue 13, 2014, Pages 47-58]
  • Mixed convection A Numerical study of similarity solution for mixed-convection copper-water nanofluid boundary layer flow over a horizontal plate [Volume 14, Issue 14, 2014, Pages 190-198]
  • Mixed convection heat transfer Numerical study of effective techniques to increase mixed convection heat transfer rate within the enclosure subjected to magnetic field [Volume 14, Issue 3, 2014, Pages 69-77]
  • Mixed discrete least square meshless Node enrichment-moving error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method for solution of elasticity problems [Volume 14, Issue 3, 2014, Pages 194-202]
  • Mixed Kalaman/H-infinity Optimal state estimation of a dynamical system corrupted with colored noises using Mixed Kalman/H-infinity filter [Volume 14, Issue 12, 2014, Pages 67-74]
  • Mixed Kalman-H infinity Filter Optimal Design of Mixed Kalman-H infinity Filter Using Multi-objective Optimization Method [Volume 14, Issue 2, 2014, Pages 128-132]
  • Mixed mode Mixed mode two dimensional weight functions for the subsurface elliptical cracks under normal loadings [Volume 14, Issue 10, 2014, Pages 50-58]
  • Mixed mode Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
  • Mixing Numerical investigation of the mixing performance of two-blade twin and circular mixers by using an improved Weakly Compressible Smoothed Particle Hydrodynamics [Volume 14, Issue 11, 2014, Pages 97-105]
  • Mixing Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace [Volume 14, Issue 16, 2014, Pages 252-260]
  • Mixing Degree Numerical investigation on the effect of various geometries on mixing efficiency of passive micromixers with oscillatory inlet velocities [Volume 14, Issue 7, 2014, Pages 27-34]
  • M-K model.  The effects of Hosford, Hill’s quadratic and non-quadratic yield criteria on prediction of forming limit diagrams based on M-K Model [Volume 14, Issue 5, 2014, Pages 137-146]
  • Modal Analysis Design and Manufacture of Vibratory Forming Tool to Develop “Ultrasonic Vibration assisted Incremental Sheet Metal Forming” Process [Volume 14, Issue 11, 2014, Pages 68-76]
  • Modal Parameters A new method for selection of reference coordinates in operational modal testing of structures [Volume 14, Issue 3, 2014, Pages 157-166]
  • Modal Parameters Selection of reference coordinates using effective independence technique in operational modal testing of structures [Volume 14, Issue 4, 2014, Pages 167-176]
  • Model-Based Estimaton Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm [Volume 14, Issue 15, 2014, Pages 241-248]
  • Model building Analysis of various non-linear k-ε models accuracy to predict flow field and pollutant dispersion around a model building [Volume 14, Issue 6, 2014, Pages 165-174]
  • Model identification Parameter estimation of the GMDH-type neural network using UKF filter [Volume 14, Issue 15, 2014, Pages 59-66]
  • Modeling Geometrical modeling of closed-cell metal foams using Stochastic cells generation [Volume 14, Issue 3, 2014, Pages 129-135]
  • Modeling Parametric study for kinematic optimization of flapping wing vehicle using a new aeroelastic model [Volume 14, Issue 9, 2014, Pages 73-80]
  • Modeling Modeling of Friction In Micro/Nano scale with Random Roughness Distribution [Volume 14, Issue 11, 2014, Pages 175-184]
  • Modeling Optimal selection of parameters of a hybrid model of vehicle/passenger for prediction of head injury in front crash [Volume 14, Issue 15, 2014, Pages 67-74]
  • Modeling of Rotating Systems Obtaining Stable Cardan Angles in Rotating Systems and Investigating the Effective Parameters on System Stability [Volume 14, Issue 12, 2014, Pages 163-170]
  • Model-in-the-loop Design and Implementation of a Model-in-the-Loop Simulator for Verification of the Vehicle Control Software in a Series Hybrid Electric Bus [Volume 14, Issue 12, 2014, Pages 13-22]
  • Modelling Modeling of sliding friction with superimposed ultrasonic oscillation ‎ [Volume 14, Issue 16, 2014, Pages 302-310]
  • Model reference adaptive system Dynamics modeling and active vibration control of a satellite with flexible solar panels [Volume 14, Issue 16, 2014, Pages 57-66]
  • Model Reference Control Identification of Lorenz chaotic system based on synchronization using fractional order calculus [Volume 14, Issue 7, 2014, Pages 68-76]
  • Model Updating Model updating of damped structures using SMURF technique [Volume 14, Issue 4, 2014, Pages 65-74]
  • Model Updating Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction [Volume 14, Issue 4, 2014, Pages 122-128]
  • Modified Adaptive Nonlinear Filter (MANF) Vehicle Longitudinal Velocity Estimation Using two New Estimators and without Measuring the Braking Torque [Volume 14, Issue 5, 2014, Pages 183-193]
  • Modified couple stress theory Nonlinear vibration analysis of an atomic force microscope microcantilever in the tapping mode based on the modified couple stress theory [Volume 14, Issue 11, 2014, Pages 9-17]
  • Modified couple stress theory Free vibration of functionally graded rectangular nanoplates in thermal environment based on the modified couple stress theory [Volume 14, Issue 15, 2014, Pages 323-330]
  • Mold design A New method to reduce weight density by considering the mold design in injection molding process of thermoplastic structural foam [Volume 14, Issue 1, 2014, Pages 203-209]
  • Molecular dynamic Discrete element method to study the impact of different parameters on the screen performance [Volume 14, Issue 9, 2014, Pages 27-34]
  • Moltibody systems dynamics modeling Dynamics modeling and active vibration control of a satellite with flexible solar panels [Volume 14, Issue 16, 2014, Pages 57-66]
  • Moment-Height Stability A Comparison of Two Online Tip-over Prevention Algorithms for Wheeled Mobile Manipulators [Volume 14, Issue 14, 2014, Pages 271-281]
  • Monte-Carlo method Study of vortical structures in a microfiber-induced drag-reduced turbulent channel flow using DNS [Volume 14, Issue 3, 2014, Pages 85-93]
  • Mooney-Rivlin model Experimental measurement and modeling of nonlinear mechanical properties of the human saphenous vessel tissue by the tensile biaxial tests [Volume 14, Issue 13, 2014, Pages 1-6]
  • Morton Number Investigation of two bubble coalescence with large density differences with Lattice Boltzmann Method [Volume 14, Issue 10, 2014, Pages 93-100]
  • Motor Current Tool wear condition monitoring using time- frequency marginal integral of motor current signal [Volume 14, Issue 16, 2014, Pages 181-189]
  • Moving boundary Kalman filter for estimating heat flux on moving-ablating- dispensing surface [Volume 14, Issue 1, 2014, Pages 10-18]
  • Moving Oscillator Optimum absorber design for beam subjected to a moving oscillator and effect of crack occurrence on absorber performance [Volume 14, Issue 13, 2014, Pages 163-171]
  • Moving system Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
  • Multi-Agent Systems Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
  • Multi-criteria analysis Design of CCHP system for office buildings in Tehran and thermodynamical, environmental and economical evaluation in comparison to conventional system [Volume 14, Issue 6, 2014, Pages 124-134]
  • Multi-criteria analysis Multi-criteria evaluation of CCHP system under different operating strategies for an office building in Tehran using AHP method [Volume 14, Issue 8, 2014, Pages 37-48]
  • Multi-effect distillation Numerical simulation and thermohydraulic performance analysis of tube-bundle in Multi-effect distillation systems to investigate the risk of precipitation [Volume 14, Issue 15, 2014, Pages 145-154]
  • Multilayered Artery Blood pulsatile effect on LDL mass transport in a multilayered carotid artery with atherosclerotic plaques [Volume 14, Issue 7, 2014, Pages 17-26]
  • Multi-objective genetic algorithm Two-objective Optimization of GEO Communication Satellite Trajectory Considering Impulsive Orbital Maneuver [Volume 14, Issue 5, 2014, Pages 121-128]
  • Multi-objective genetic algorithm Multi-objective optimum design of an FG Al-SiC rotating disc with temperature dependent properties based on creep behavior [Volume 14, Issue 12, 2014, Pages 23-34]
  • Multi objective optimization Multi objective optimization of heat pipe thermal performance while using aluminium oxide nanofluid [Volume 14, Issue 1, 2014, Pages 158-167]
  • Multi-objective optimization using NSGA-II Optimization of power transmission interaction of multilayered panel using genetic algorithm [Volume 14, Issue 1, 2014, Pages 27-34]
  • Multi objective particle swarm optimization multi objective optimization of sandwich panels using particle swarm algorithm [Volume 14, Issue 1, 2014, Pages 74-82]
  • Multiple Scale Method Nonlinear Vibrations of Sandwich FG Plates Resting on Nonlinear Pasternak Foundation under Primary Resonance Excitation Using Modified FSDT [Volume 14, Issue 15, 2014, Pages 186-198]
  • Multiple scattering Multiple Scattering of an Acoustic Wave from Fibers Encased in a Solid Viscoelastic Medium [Volume 14, Issue 15, 2014, Pages 423-430]
  • Multi-scale Modeling Mechanical Effects of Extra-cellular Matrix on Growth and Migration of Endothelial Cells in Tumor-induced Angiogenesis [Volume 14, Issue 7, 2014, Pages 1-9]
  • Multi-step Free whirling analysis of multi-step Timoshenko rotor with multiple bearing using DQEM [Volume 14, Issue 10, 2014, Pages 109-120]
  • MUSCL Extension of MUSCL-Hancock method for 2D five-equation two-fluid model for simulation of gas-liquid two-phase flow [Volume 14, Issue 11, 2014, Pages 144-150]
  • Muscle tuning The roll of fatigue on optimal design of sport footwear [Volume 14, Issue 14, 2014, Pages 167-176]
  • MW- KNN Application of a Simple Robust 2-D Pictorial-Geometrical Feature on QRS Complex Detection [Volume 14, Issue 7, 2014, Pages 117-121]
N
  • Nano and ultra-fine grain structure Microstructure, Mechanical and Electrical Properties of Commercially Pure Copper Deformed Severely by Equal Channel Angular Pressing [Volume 14, Issue 15, 2014, Pages 257-266]
  • Nanoclay Experimental investigation of effects of nanoclay on ballistic properties of GLARE [Volume 14, Issue 4, 2014, Pages 141-146]
  • Nanoclay Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles [Volume 14, Issue 7, 2014, Pages 103-108]
  • Nanoclay Experimental investigation of nanoclay and nanosilica particles effects on mechanical properties of glass epoxy composites [Volume 14, Issue 16, 2014, Pages 76-82]
  • Nanocomposite The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
  • Nanocomposite Mechanical and thermal properties of nanocomposites based on polypropylene/linear low density polyethylene/titanium dioxide [Volume 14, Issue 3, 2014, Pages 103-109]
  • Nanocomposite Studies on the Tensile and Flexural Properties of TETA-Cured Epoxy Resins Modified With Clay [Volume 14, Issue 6, 2014, Pages 29-34]
  • Nanocomposite Studies on the reinforcing effect of modified nanoclay on tensile and flexural properties of TETA- and F205-cured epoxy resins [Volume 14, Issue 10, 2014, Pages 9-16]
  • Nanocomposite Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
  • Nanocomposite Experimental investigation of nanoclay and nanosilica particles effects on mechanical properties of glass epoxy composites [Volume 14, Issue 16, 2014, Pages 76-82]
  • Nanofluid Multi objective optimization of heat pipe thermal performance while using aluminium oxide nanofluid [Volume 14, Issue 1, 2014, Pages 158-167]
  • Nanofluid Numerical study of effective techniques to increase mixed convection heat transfer rate within the enclosure subjected to magnetic field [Volume 14, Issue 3, 2014, Pages 69-77]
  • Nanofluid Effects of magnetic field on mixed convection heat transfer and entropy generation of Cu-water nanofluid in a trapezoidal enclosure [Volume 14, Issue 9, 2014, Pages 183-194]
  • Nanofluid Mixed convection in a trapezoidal enclosure filled with Cu-water nanofluid [Volume 14, Issue 6, 2014, Pages 41-51]
  • Nanofluid Magnetic field effect on nanofluid water-cu natural convection in an inclined T shape cavity [Volume 14, Issue 12, 2014, Pages 179-189]
  • Nanofluid Numerical Study of Subcooled Flow Boiling of Water-Al2O3 in Vertical Sinusoidal Wavy Channel [Volume 14, Issue 11, 2014, Pages 195-203]
  • Nanofluid Experimental Investigation of Heat Transfer Coefficient and Pressure Drop of Carbon Nanotubes-Water Nanofluid under Constant Heat Flux [Volume 14, Issue 13, 2014, Pages 19-26]
  • Nanofluid A Numerical study of similarity solution for mixed-convection copper-water nanofluid boundary layer flow over a horizontal plate [Volume 14, Issue 14, 2014, Pages 190-198]
  • Nanofluid Porous Matrix properties effect on the internal heat generation in a square cavity saturated with Cu-Water nanofluid [Volume 14, Issue 16, 2014, Pages 34-44]
  • Nanoilica Experimental investigation of nanoclay and nanosilica particles effects on mechanical properties of glass epoxy composites [Volume 14, Issue 16, 2014, Pages 76-82]
  • Nanopositioning Stage Study of Cross-coupling Effect in Piezo-flexural Nanopositioning Stages [Volume 14, Issue 2, 2014, Pages 1-8]
  • Nano-size Al2O3 Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6 [Volume 14, Issue 12, 2014, Pages 85-90]
  • Nasal cavity Numerical simulation of turbulent airflow in a human upper respiratory system [Volume 14, Issue 15, 2014, Pages 267-272]
  • Natural Convection Magnetic field effect on nanofluid water-cu natural convection in an inclined T shape cavity [Volume 14, Issue 12, 2014, Pages 179-189]
  • Natural Convection Natural Convection Heat Transfer of a Supercritical Fluid in a Vertical channel with isothermal condition [Volume 14, Issue 15, 2014, Pages 33-41]
  • Natural Convection Porous Matrix properties effect on the internal heat generation in a square cavity saturated with Cu-Water nanofluid [Volume 14, Issue 16, 2014, Pages 34-44]
  • Natural frequencies Detection of Size and Location of Crack in Pipes Under Fluid Pressure by Neural Networks [Volume 14, Issue 7, 2014, Pages 35-42]
  • Natural frequencies Estimation of natural frequencies using mass-cancellation method in operational modal testing [Volume 14, Issue 8, 2014, Pages 183-192]
  • Natural gas Experimental study on the effect of coal particles injection on flame structure, radiation heat transfer, temperature distribution and thermal efficiency in natural gas diffusion flames [Volume 14, Issue 7, 2014, Pages 163-168]
  • Natural gas An experimental study on the effect of synchronous combustion of gas- gasoil on luminosity and radiative heat transfer of natural gas flame [Volume 14, Issue 15, 2014, Pages 11-16]
  • Natural Gas Transmission Pipe Effects of surface crack length and depth variations on gas transmission pipeline safety [Volume 14, Issue 5, 2014, Pages 26-32]
  • Natural vibrations Buckling and vibration of symmetrically-laminated composite elliptical plates resting on Winkler-type foundation subjected to initial in-plane stresses [Volume 14, Issue 1, 2014, Pages 19-26]
  • Navigation Error Navigation Error Effect in the Terrain Following Based Constraint Optimal Trajectory Design for UAVs [Volume 14, Issue 12, 2014, Pages 145-155]
  • NDT An Investigation to Corrosion of Stainless Steels by Acoustic Emission Method [Volume 14, Issue 2, 2014, Pages 195-200]
  • Near Dry EDM Experimental study of the near dry EDM process [Volume 14, Issue 1, 2014, Pages 106-112]
  • Near dry lubrication Investigation of tool life with Simple and viper ceramic tools in near dry machining in high speed turning [Volume 14, Issue 1, 2014, Pages 83-88]
  • Nesting An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
  • Network Flow Navigation Error Effect in the Terrain Following Based Constraint Optimal Trajectory Design for UAVs [Volume 14, Issue 12, 2014, Pages 145-155]
  • Network Model Numerical Analysis of Flow and Mass Transfer in the Renal Glomeruli Capillary Network [Volume 14, Issue 8, 2014, Pages 1-7]
  • Neural Network Comparison of Aeroelastic performance base and optimized blades of Horizontal Axis Wind Turbine [Volume 14, Issue 16, 2014, Pages 283-290]
  • Neural Network Identification of broken needle in single jersey circular knitting machine using neural network on yarn fluctuations signals [Volume 14, Issue 16, 2014, Pages 339-348]
  • Newtonian Approach Inverse Dynamic Problem of Two Parallel Manipulators with Identical Limbs Structures [Volume 14, Issue 13, 2014, Pages 281-290]
  • Newtonian fluid Numerical simulation of unsteady blood flow through an elastic artery with a non-symmetric stenosis [Volume 14, Issue 10, 2014, Pages 26-34]
  • Nitrogen oxide Numerical analysis of effects of primary aeration on NOX production in a model gas turbine combustion chamber [Volume 14, Issue 10, 2014, Pages 101-108]
  • Non aging Viscoelastic medium Analytic Bifurcation Investigation of Cylindrical Shallow Shells under ‎Lateral Stochastic Excitation [Volume 14, Issue 7, 2014, Pages 77-84]
  • Noncircular journal bearing Effects of Preload on Nonlinear Dynamic Behavior of Noncircular Aerodynamic Journal Bearing [Volume 14, Issue 16, 2014, Pages 45-56]
  • Nonholonomic Constraint Trajectory tracking control of a wheeled mobile robot by a non-model-based control algorithm using PD-action filtered errors [Volume 14, Issue 12, 2014, Pages 171-178]
  • Nonholonomic systems Design and Implementation of a Fuzzy Sliding Mode Control Law for a Wheeled Robot Towing a Trailer [Volume 14, Issue 4, 2014, Pages 91-98]
  • Non- homogeneous body Identifying two regular interfacial boundary configurations and simultaneously estimation of mechanical properties using Imperialist competitive Algorithm and Simplex method [Volume 14, Issue 10, 2014, Pages 71-79]
  • Non-invasive technique Artificial tactile sensing capability in tumor detection of the liver tissue utilizing in vitro experimental data and hyperelastic finite element modeling [Volume 14, Issue 15, 2014, Pages 388-394]
  • Non isentropic flow Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
  • Nonlinear bending Nonlinear bending analysis of circular functionally graded sandwich plates [Volume 14, Issue 4, 2014, Pages 111-121]
  • Nonlinear characteristics Experimental measurement and modeling of nonlinear mechanical properties of the human saphenous vessel tissue by the tensile biaxial tests [Volume 14, Issue 13, 2014, Pages 1-6]
  • Nonlinear Damping Factor Nonlinear vibration analysis of an atomic force microscope microcantilever in the tapping mode based on the modified couple stress theory [Volume 14, Issue 11, 2014, Pages 9-17]
  • Nonlinear dynamic behavior Effects of Preload on Nonlinear Dynamic Behavior of Noncircular Aerodynamic Journal Bearing [Volume 14, Issue 16, 2014, Pages 45-56]
  • Non-linear FE model Analysis of dynamic behavior of FE model of drillstring – wellbore contact with improved contact model [Volume 14, Issue 11, 2014, Pages 185-194]
  • Non-linear FE model Analysis of Dynamic Behavior of Non-linear FE Model of Drillstring [Volume 14, Issue 13, 2014, Pages 119-130]
  • Non-Linear Finite Element Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
  • Nonlinear finite element analysis Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
  • Nonlinear Flexible Spacecraft Robust Control of Flexible Spacecraft Considering Actuator Dynamic [Volume 14, Issue 15, 2014, Pages 225-230]
  • Nonlinear Forced Vibration Nonlinear forced vibration analysis of functionally graded nanobeams in thermal environments with considering surface stress and nonlocal effects [Volume 14, Issue 16, 2014, Pages 17-26]
  • Nonlinear forced vibrations Nonlinear forced vibration of axially moving Timoshenko beam in thermal environment via the harmonic balance method [Volume 14, Issue 11, 2014, Pages 137-143]
  • Nonlinear Frequency Nonlinear vibration analysis of an atomic force microscope microcantilever in the tapping mode based on the modified couple stress theory [Volume 14, Issue 11, 2014, Pages 9-17]
  • Non-linear k-ε models Analysis of various non-linear k-ε models accuracy to predict flow field and pollutant dispersion around a model building [Volume 14, Issue 6, 2014, Pages 165-174]
  • Nonlinear Mechanics Nonlinear Mechanic Model of Asymmetric Structure- Base Isolator Interaction under Harmonic and Earthquake Loads and Study of its Nonlinear Phenomena-Revised [Volume 14, Issue 16, 2014, Pages 152-162]
  • Nonlinear Pasternak Foundation Nonlinear Vibrations of Sandwich FG Plates Resting on Nonlinear Pasternak Foundation under Primary Resonance Excitation Using Modified FSDT [Volume 14, Issue 15, 2014, Pages 186-198]
  • Nonlinear Phenomena Nonlinear Mechanic Model of Asymmetric Structure- Base Isolator Interaction under Harmonic and Earthquake Loads and Study of its Nonlinear Phenomena-Revised [Volume 14, Issue 16, 2014, Pages 152-162]
  • Nonlinear Vibration An introduction of new polynomial functions for nonlinear vibration analysis of cracked rectangular plates involving free edges [Volume 14, Issue 15, 2014, Pages 24-32]
  • Nonlinear vibrations Bifurcation and chaos control in a gear transmission [Volume 14, Issue 14, 2014, Pages 61-68]
  • Nonlocal Effect Nonlinear forced vibration analysis of functionally graded nanobeams in thermal environments with considering surface stress and nonlocal effects [Volume 14, Issue 16, 2014, Pages 17-26]
  • Nonlocal elasticity Exact solutions for free vibration of lévy-type rectangular nanoplates via nonlocal third-order plate theory [Volume 14, Issue 7, 2014, Pages 122-130]
  • Non-Model-Based Controller Trajectory tracking control of a wheeled mobile robot by a non-model-based control algorithm using PD-action filtered errors [Volume 14, Issue 12, 2014, Pages 171-178]
  • Non-Newtonian Fluid Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
  • Non-Newtonian Fluid Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
  • Non-recrystallization temperature The use of hot torsion testing for determination of critical temperatures of API X65 steel [Volume 14, Issue 13, 2014, Pages 291-296]
  • Non-uniform loading Analytical solution for buckling of rectangular plates subjected to non-uniform in-plane loading based on first order shear deformation theory [Volume 14, Issue 13, 2014, Pages 37-46]
  • Normal shock Development of Bond Graph Approches for Modeling of a Non-isentropic Nozzle [Volume 14, Issue 6, 2014, Pages 99-106]
  • Numerical analysis Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
  • Numerical analysis Numerical analysis of a magnetohydrodynamic micropump performance [Volume 14, Issue 13, 2014, Pages 251-258]
  • Numerical Implementation Numerical Implementation and Calibration of Microplane Model for Closed-Cell Metal Foams with Spherical Cellular Structure [Volume 14, Issue 10, 2014, Pages 121-128]
  • Numerical method Mixed convection in a trapezoidal enclosure filled with Cu-water nanofluid [Volume 14, Issue 6, 2014, Pages 41-51]
  • Numerical Modeling Exergy Analysis of the Adsorbent Bed in adsorption chillers [Volume 14, Issue 2, 2014, Pages 70-78]
  • Numerical Modeling Numerical and experimental analyses of projectile penetration in grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 9, 2014, Pages 17-26]
  • Numerical similarity solution A Numerical study of similarity solution for mixed-convection copper-water nanofluid boundary layer flow over a horizontal plate [Volume 14, Issue 14, 2014, Pages 190-198]
  • Numerical simulation Numerical and experimental study of the effects of physical and the geometrical parameters on efficiency of a Micro-Pelton Turbine [Volume 14, Issue 2, 2014, Pages 150-158]
  • Numerical simulation 2D Simulation of Catalytic Radiant Counter-Diffusive Burners [Volume 14, Issue 5, 2014, Pages 83-90]
  • Numerical simulation Simulation and parameter study of small scale variable geometry ejector using CFD [Volume 14, Issue 5, 2014, Pages 129-136]
  • Numerical simulation Numerical and Experimental Analysis of a Suction Cup Vortex Attractor Used in Wall Climbing Robots [Volume 14, Issue 9, 2014, Pages 195-202]
  • Numerical simulation Analytical, experimental and numerical Investigation of Sandwich Panels made of Honeycomb Core subjected projectile impact [Volume 14, Issue 6, 2014, Pages 153-164]
  • Numerical simulation Three Dimensional Simulation of Two-Phase Slug Flow Regime In a Horizontal Channel Using VOF Method [Volume 14, Issue 7, 2014, Pages 176-182]
  • Numerical simulation Numerical Simulation and Investigation of Bubble Velocity and Deformation in Inclined Channel with Two Consecutive Slopes Using VOF-PLIC Method [Volume 14, Issue 11, 2014, Pages 29-36]
  • Numerical simulation Numerical study of bluff body effect on lean premixed hydrogen/air combustion in a micro- scale combustor [Volume 14, Issue 13, 2014, Pages 86-94]
  • Numerical simulation Explicit finite element modeling of impact loading on nanobeam to compare with Euler–Bernoulli and Timoshenko theory [Volume 14, Issue 13, 2014, Pages 259-264]
  • Numerical simulation Numerical and experimental investigation of single point incremental forming of two layer sheet metals [Volume 14, Issue 14, 2014, Pages 1-8]
  • Numerical simulation Numerical Simulation and Experimental Investigation of the Air-Water Two-Phase Flow Patterns inside a Ribbed Horizontal Duct [Volume 14, Issue 14, 2014, Pages 217-226]
  • Numerical simulation Numerical simulation and thermohydraulic performance analysis of tube-bundle in Multi-effect distillation systems to investigate the risk of precipitation [Volume 14, Issue 15, 2014, Pages 145-154]
  • Numerical simulation Optimal Design, modeling and manufacturing of the eddy current damper by arrangement permanent magnet [Volume 14, Issue 16, 2014, Pages 163-169]
  • Nusselt number Numerical study of effective techniques to increase mixed convection heat transfer rate within the enclosure subjected to magnetic field [Volume 14, Issue 3, 2014, Pages 69-77]
  • Nusselt number A New Geometrical Modeling Approach in the Analysis and Optimization of Convection Heat Transfer in Wavy Channels [Volume 14, Issue 9, 2014, Pages 147-156]
O
  • Observer Matching Condition Residual Generation in Linear Systems with Unmatched Uncertainties for Fault Detection Problems [Volume 14, Issue 7, 2014, Pages 191-198]
  • Offset cracks Study and Analysis of Alignment and Combination Rules for Offset Cracks [Volume 14, Issue 5, 2014, Pages 91-101]
  • One-third octave band An analysis of hydrodynamics and noise behavior for submerged propeller in various conditions by experimental and numerical methods [Volume 14, Issue 5, 2014, Pages 15-25]
  • Online Tip-Over Prevention A Comparison of Two Online Tip-over Prevention Algorithms for Wheeled Mobile Manipulators [Volume 14, Issue 14, 2014, Pages 271-281]
  • On/Off Valves Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
  • Onset Yield Analysis Onset yield analysis of rotating disks made of functionally graded materials using Tresca yield criterion [Volume 14, Issue 8, 2014, Pages 68-74]
  • Open Crack Optimum absorber design for beam subjected to a moving oscillator and effect of crack occurrence on absorber performance [Volume 14, Issue 13, 2014, Pages 163-171]
  • OpenFoam Analysis of various non-linear k-ε models accuracy to predict flow field and pollutant dispersion around a model building [Volume 14, Issue 6, 2014, Pages 165-174]
  • OpenFoam software Three Dimensional Simulation of Two-Phase Slug Flow Regime In a Horizontal Channel Using VOF Method [Volume 14, Issue 7, 2014, Pages 176-182]
  • Operational modal analysis A new method for selection of reference coordinates in operational modal testing of structures [Volume 14, Issue 3, 2014, Pages 157-166]
  • Operational modal analysis Selection of reference coordinates using effective independence technique in operational modal testing of structures [Volume 14, Issue 4, 2014, Pages 167-176]
  • Operational modal analysis Estimation of natural frequencies using mass-cancellation method in operational modal testing [Volume 14, Issue 8, 2014, Pages 183-192]
  • Optical Visualization Experimental study of the effect of inlet flow parameters on the operation of PEMFC [Volume 14, Issue 5, 2014, Pages 33-43]
  • Optimal Control Control of the active anti-roll bar of Off-Road vehicle for roll stability improvement [Volume 14, Issue 10, 2014, Pages 85-92]
  • Optimal Control Theoretical and experimental investigation of dynamic load carrying capacity of flexible link manipulator in point-to-point motion [Volume 14, Issue 15, 2014, Pages 199-206]
  • Optimization Optimal Compliant Design of a Planar Linkage for Decreasing the Undesirable Effects of Joint Clearance [Volume 14, Issue 5, 2014, Pages 55-62]
  • Optimization Parametric study for kinematic optimization of flapping wing vehicle using a new aeroelastic model [Volume 14, Issue 9, 2014, Pages 73-80]
  • Optimization Employing Nelder-Mead Method in Point Clouds Registration Process and Comparison of the Results with Singular Value Decomposition and Genetic Algorithm [Volume 14, Issue 9, 2014, Pages 117-124]
  • Optimization Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
  • Optimization Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
  • Optimization Optimal selection of parameters of a hybrid model of vehicle/passenger for prediction of head injury in front crash [Volume 14, Issue 15, 2014, Pages 67-74]
  • Optimization Single-objective and multi-objective optimization of curved sandwich panel with magneto-rheological fluid core using genetic algorithm [Volume 14, Issue 15, 2014, Pages 414-422]
  • Optimization Cutting of Ti6Al4V titanium alloy using abrasive water jet and multiobjective optimization of geometry features [Volume 14, Issue 16, 2014, Pages 67-75]
  • Optimization Analytical and numerical study of energy absorption of graded honeycomb structure under in-plane impact [Volume 14, Issue 16, 2014, Pages 261-271]
  • Optimization Optimal layout design for a space control system modules using a gradient- based method [Volume 14, Issue 16, 2014, Pages 272-282]
  • Optimization Comparison of Aeroelastic performance base and optimized blades of Horizontal Axis Wind Turbine [Volume 14, Issue 16, 2014, Pages 283-290]
  • Organic Rankine Cycle Energy and exergy analysis of Organic Rankine Cycle with using two-component working fluid in specified heat source conditions [Volume 14, Issue 3, 2014, Pages 145-156]
  • Orthopedic plate Effect of placement and material properties of tibial plate on stress pattern at fractured site [Volume 14, Issue 11, 2014, Pages 159-165]
  • Oscillation Frequency Experimental Investigation of the Buzz Cycle in a Supersonic Axisymmetric Intake [Volume 14, Issue 16, 2014, Pages 311-320]
  • Oscillatory Velocity Numerical investigation on the effect of various geometries on mixing efficiency of passive micromixers with oscillatory inlet velocities [Volume 14, Issue 7, 2014, Pages 27-34]
  • Outer wall temperature Numerical study of bluff body effect on lean premixed hydrogen/air combustion in a micro- scale combustor [Volume 14, Issue 13, 2014, Pages 86-94]
  • Out-of-Plane Dynamic Moment Study on strain accumulation of carbon Steel pressurized piping elbows under dynamic out-of-plane bendings [Volume 14, Issue 15, 2014, Pages 218-224]
  • Oxygen transport Effects of baffle-blocked flow cathode channel on reactant transport and cell performance of a PEMFC [Volume 14, Issue 4, 2014, Pages 158-166]
P
  • Panel flutter 2D Curved plate Non-linear vibration and Aeroelastic analysis with in-plane and Supersonic Aerodynamic load in Time domain [Volume 14, Issue 15, 2014, Pages 405-413]
  • Parabolic trough collector Solar Field Thermo-economical optimization of Yazd Integrated Solar Combined Cycle (ISCC) [Volume 14, Issue 2, 2014, Pages 117-127]
  • Parallel Distributed Compensator approach Investigation of the Stability of Electro Hydraulic Servo System using Fuzzy Intelligent Controller [Volume 14, Issue 3, 2014, Pages 36-42]
  • Parallel kinematic Cartesian Dimensional Homogeneous Jacobian Matrix for Performance Evaluation and Optimization of Complex Dof Parallel Manipulator [Volume 14, Issue 10, 2014, Pages 129-138]
  • Parallel Mechanism Static Balancing of Parallel Planar 3-DOF Mechanisms, 3-RRR, 3-PRR, 3-RPR and static balancing of variable weights [Volume 14, Issue 16, 2014, Pages 321-331]
  • Parallel processing Turbulent wind flow simulation over Tarbiat Modares University [Volume 14, Issue 13, 2014, Pages 272-280]
  • Parallel Robot Title: Design and analysis of workspace and singularity of a 4 degree of freedom parallel robot [Volume 14, Issue 8, 2014, Pages 28-36]
  • Parallel Tubular Channel Angular Pressing (PTCAP) Study of effective parameters of Parallel Tubular Channel Angular Pressing(PTCAP) [Volume 14, Issue 16, 2014, Pages 27-33]
  • Parameter estimation Parameter estimation of the GMDH-type neural network using UKF filter [Volume 14, Issue 15, 2014, Pages 59-66]
  • Parameter identification Identification of Lorenz chaotic system based on synchronization using fractional order calculus [Volume 14, Issue 7, 2014, Pages 68-76]
  • Pareto front Multi-objective optimum design of an FG Al-SiC rotating disc with temperature dependent properties based on creep behavior [Volume 14, Issue 12, 2014, Pages 23-34]
  • Pareto front Pareto discrete- continuous optimization of Sikorsky ASH-3D helicopter main gearbox [Volume 14, Issue 16, 2014, Pages 170-180]
  • Particle Swarm Optimization The roll of fatigue on optimal design of sport footwear [Volume 14, Issue 14, 2014, Pages 167-176]
  • Particle swarm optimization method Safe path planning and control an Unmanned Underwater Vehicle (UUV) using particle swarm optimization and fuzzy logic control method [Volume 14, Issue 14, 2014, Pages 199-210]
  • Passive balance The effect of damping ratio and balls mass on the stability of automatic ball balancer and determining their optimum values [Volume 14, Issue 3, 2014, Pages 110-118]
  • Pasternak Elastic Foundation Static/Dynamic Instability and Nonlinear Vibrations of FG Plates Resting on Elastic Foundation under Parametric Forcing Excitation [Volume 14, Issue 13, 2014, Pages 172-182]
  • Pedestrian comfort Turbulent wind flow simulation over Tarbiat Modares University [Volume 14, Issue 13, 2014, Pages 272-280]
  • Peeling Production of Bilayer Al/St Tubes by Cold Spin Bonding and Investigation of Different Parameters on Bonding Strength of Layers [Volume 14, Issue 15, 2014, Pages 111-118]
  • Pellet Discrete element method to study the impact of different parameters on the screen performance [Volume 14, Issue 9, 2014, Pages 27-34]
  • PEMFC Effects of baffle-blocked flow cathode channel on reactant transport and cell performance of a PEMFC [Volume 14, Issue 4, 2014, Pages 158-166]
  • PEMFC Experimental study of the effect of inlet flow parameters on the operation of PEMFC [Volume 14, Issue 5, 2014, Pages 33-43]
  • PEM fuel cell A parametric study of the performance of a membrane humidifier for PEM fuel cell [Volume 14, Issue 2, 2014, Pages 107-116]
  • PEM fuel cell Offering a semi-analytical model to evaluate efficiency of PEM fuel cell system using ejector in fuel supply circuit [Volume 14, Issue 13, 2014, Pages 59-66]
  • Perturbation method Static/Dynamic Instability and Nonlinear Vibrations of FG Plates Resting on Elastic Foundation under Parametric Forcing Excitation [Volume 14, Issue 13, 2014, Pages 172-182]
  • Petrochemical industry Modelling and empirical investigation of micro-electro-mechanical piezo-resisitive pressure sensor based on the requirements of petrochemical industry [Volume 14, Issue 16, 2014, Pages 349-357]
  • PID Control Dynamic modeling, simulation and control of a quadrotor using MEMS sensors’ experimental data [Volume 14, Issue 3, 2014, Pages 176-184]
  • Piezoelectric Investigating Energy Harvesting from Unimorph Trapezoidal Beam Vibrations Using Distributed Parameters Method [Volume 14, Issue 15, 2014, Pages 96-102]
  • Piezoelectric Actuator Study of Cross-coupling Effect in Piezo-flexural Nanopositioning Stages [Volume 14, Issue 2, 2014, Pages 1-8]
  • Piezoelectric fibrous composites A micromechanical study on the electro-elastic behavior of piezoelectric fibrous composites using element free Galerkin method [Volume 14, Issue 6, 2014, Pages 175-184]
  • Piezoresistive Modelling and empirical investigation of micro-electro-mechanical piezo-resisitive pressure sensor based on the requirements of petrochemical industry [Volume 14, Issue 16, 2014, Pages 349-357]
  • Piloting An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
  • Pipeline Safety Effects of surface crack length and depth variations on gas transmission pipeline safety [Volume 14, Issue 5, 2014, Pages 26-32]
  • Pipes Detection of Size and Location of Crack in Pipes Under Fluid Pressure by Neural Networks [Volume 14, Issue 7, 2014, Pages 35-42]
  • Pitching Longitudinal Dynamic Derivatives of an Airfoil under Pitching and Plunging Oscillations in Wind Tunnel [Volume 14, Issue 10, 2014, Pages 159-166]
  • Planar cable robot Appling Evolutionary Algorithms in Multi objective Optimization of Planar Cable-driven Parallel Robots [Volume 14, Issue 5, 2014, Pages 44-54]
  • Plastic instability Analytical Prediction of Limit Strains and Limit Stresses in Hydroforming of Anisotropic Aluminum Tubes [Volume 14, Issue 2, 2014, Pages 133-140]
  • Plate-fin heat exchanger Modelling, Design and Analysis of Plate-Fin Heat Exchanger in Constant Volume, Constant Heat Transfer Area and Constant Pressure Drop to Obtain Maximum Energy Recovery [Volume 14, Issue 15, 2014, Pages 337-344]
  • Plug Flow Experimental study of length, velocity and frequency of taylor bubbles in gas-liquid two-phase flow in a large bend [Volume 14, Issue 12, 2014, Pages 133-144]
  • Plunging Longitudinal Dynamic Derivatives of an Airfoil under Pitching and Plunging Oscillations in Wind Tunnel [Volume 14, Issue 10, 2014, Pages 159-166]
  • Plunging-Mode Modeling and calculating the anchor loss quality factor in the plunging-mode vibrations of a micromechanical rectangular-plate resonator with two T-shaped support beams [Volume 14, Issue 12, 2014, Pages 75-84]
  • Pneumatic actuator Impedance Control of a Pneumatic Actuator with Solenoid On/Off Valves [Volume 14, Issue 4, 2014, Pages 12-20]
  • Poincare map Effects of Preload on Nonlinear Dynamic Behavior of Noncircular Aerodynamic Journal Bearing [Volume 14, Issue 16, 2014, Pages 45-56]
  • Point cloud Using homogeneous neighborhood in point clouds normal vector calculation [Volume 14, Issue 5, 2014, Pages 155-163]
  • Point Clouds Employing Nelder-Mead Method in Point Clouds Registration Process and Comparison of the Results with Singular Value Decomposition and Genetic Algorithm [Volume 14, Issue 9, 2014, Pages 117-124]
  • Pollutant dispersion Analysis of various non-linear k-ε models accuracy to predict flow field and pollutant dispersion around a model building [Volume 14, Issue 6, 2014, Pages 165-174]
  • Polymer-matrix nanocomposites Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles [Volume 14, Issue 7, 2014, Pages 103-108]
  • Polypropylene Mechanical and thermal properties of nanocomposites based on polypropylene/linear low density polyethylene/titanium dioxide [Volume 14, Issue 3, 2014, Pages 103-109]
  • Pontryagin’s minimum iprinciples Joint Space Kinematic Optimization of the Dual-Arm Cam-Lock Robot [Volume 14, Issue 11, 2014, Pages 127-136]
  • Pontryagin's Minimum Principle Theoretical and experimental investigation of dynamic load carrying capacity of flexible link manipulator in point-to-point motion [Volume 14, Issue 15, 2014, Pages 199-206]
  • Porous Materials Power Sound Transmission through Double-Walled Laminated Composite Panel with Intermediate Porous Layer Considering Different Boundary Conditions [Volume 14, Issue 6, 2014, Pages 11-21]
  • Porous Media 2D Simulation of Catalytic Radiant Counter-Diffusive Burners [Volume 14, Issue 5, 2014, Pages 83-90]
  • Porous Media Porous Matrix properties effect on the internal heat generation in a square cavity saturated with Cu-Water nanofluid [Volume 14, Issue 16, 2014, Pages 34-44]
  • Porous Medium Experimental Investigation of Forced Convection of Nanofluids in a Horizontal Tube Filled with Porous medium [Volume 14, Issue 7, 2014, Pages 109-116]
  • Powder metallurgy Investigation of machinability of green and sintered iron-jet milled cast iron powder metallurgy parts [Volume 14, Issue 11, 2014, Pages 59-67]
  • Power hardening Analytical and numerical study of energy absorption of graded honeycomb structure under in-plane impact [Volume 14, Issue 16, 2014, Pages 261-271]
  • Power-law Immersed boundary - lattice Boltzmann method for modeling non-Newtonian flow around curved boundaries [Volume 14, Issue 8, 2014, Pages 146-156]
  • Power-law preconditioning method Blowing and suction effect on drag and lift coefficients for viscous incompressible flows over hydrofoils by power-law preconditioning method [Volume 14, Issue 4, 2014, Pages 129-140]
  • Power-law preconditioning method Numerical investigation of blowing effect on hydrodynamic behavior of cavitating flows over hydrofoils using power law preconditioning method [Volume 14, Issue 8, 2014, Pages 59-67]
  • Power Transmission System Stability analysis of a three-axis power transmission system [Volume 14, Issue 1, 2014, Pages 35-44]
  • Prandtl–Ishlinskii model Identification hysteresis behavior of hydraulic proportional relief valve by the generalized prandtl – ishlinskii model [Volume 14, Issue 9, 2014, Pages 125-132]
  • Precurser elastic wave Modeling and analytical study of progressive collapse of aluminum foam [Volume 14, Issue 9, 2014, Pages 99-106]
  • Prediction of Bending Angle Effects of process parameters on bending magnitude in laser forming and determine an equation to predict bending angle [Volume 14, Issue 8, 2014, Pages 75-82]
  • Preliminary design Simple method for buckling load of composite conical Lattice structures under axial load [Volume 14, Issue 15, 2014, Pages 290-298]
  • Pressure drop Effects of baffle-blocked flow cathode channel on reactant transport and cell performance of a PEMFC [Volume 14, Issue 4, 2014, Pages 158-166]
  • Pressure drop A New Geometrical Modeling Approach in the Analysis and Optimization of Convection Heat Transfer in Wavy Channels [Volume 14, Issue 9, 2014, Pages 147-156]
  • Pressure drop Modelling, Design and Analysis of Plate-Fin Heat Exchanger in Constant Volume, Constant Heat Transfer Area and Constant Pressure Drop to Obtain Maximum Energy Recovery [Volume 14, Issue 15, 2014, Pages 337-344]
  • Pressure Gradient Investigation of pressure gradient effect on stress intensity factor variations in autofrettaged cracked thick-walled tubes using two dimensional weight function method [Volume 14, Issue 8, 2014, Pages 137-145]
  • Pressure Pulsations Numerical Investigation of the Effect of Locating Groove on the Runner Cone of a Pump-Turbine on the Vortex Flow in the Draft Tube [Volume 14, Issue 15, 2014, Pages 352-360]
  • Pre-stress Using co-rotational approach for analysing nonlinear dynamic tensegrity structures [Volume 14, Issue 14, 2014, Pages 245-250]
  • Primary aeration Numerical analysis of effects of primary aeration on NOX production in a model gas turbine combustion chamber [Volume 14, Issue 10, 2014, Pages 101-108]
  • Principal component analysis Cutting of Ti6Al4V titanium alloy using abrasive water jet and multiobjective optimization of geometry features [Volume 14, Issue 16, 2014, Pages 67-75]
  • Principal component analysis (PCA) Lower Extremity Kinematic Analysis of Medial Tibiofemoral Osteoarthritis Patients in Frontal Plane using Principal Components Analysis(PCA) [Volume 14, Issue 2, 2014, Pages 159-166]
  • Prismatic core sandwich panel multi objective optimization of sandwich panels using particle swarm algorithm [Volume 14, Issue 1, 2014, Pages 74-82]
  • Progressive Die An automated nesting and piloting system in progressive dies using fuzzy rules [Volume 14, Issue 2, 2014, Pages 9-18]
  • Projectile nose shape Experimental investigation of cylindrical projectiles nose shape effects on high velocity perforation of woven polymer composite [Volume 14, Issue 14, 2014, Pages 309-318]
  • Prompt mechanism Numerical analysis of effects of primary aeration on NOX production in a model gas turbine combustion chamber [Volume 14, Issue 10, 2014, Pages 101-108]
  • Propeller hydrodynamics An analysis of hydrodynamics and noise behavior for submerged propeller in various conditions by experimental and numerical methods [Volume 14, Issue 5, 2014, Pages 15-25]
  • Propeller noise An analysis of hydrodynamics and noise behavior for submerged propeller in various conditions by experimental and numerical methods [Volume 14, Issue 5, 2014, Pages 15-25]
  • Pseudo-Spectral Numerical study of the impact of the initial turbulent integral length scale on the dynamics of a two dimensional shear-free turbulent mixing layer [Volume 14, Issue 6, 2014, Pages 113-123]
  • Pt on Alumina fiber Fabrication and performance study of the radiative catalytic pad for flameless combustion of natural gas in different climate conditions [Volume 14, Issue 9, 2014, Pages 57-64]
  • Pull-in Study On the Size Dependent Behavior of a Micro-beam Subjected to a Nonlinear Electrostatic Pressure [Volume 14, Issue 15, 2014, Pages 137-144]
  • Pull-in voltage Presenting a size-dependent electro-mechanical model for rectangular plates-based resonant micro-sensors based on modified couple stress theory [Volume 14, Issue 8, 2014, Pages 121-130]
  • Pulsatile Flow Blood pulsatile effect on LDL mass transport in a multilayered carotid artery with atherosclerotic plaques [Volume 14, Issue 7, 2014, Pages 17-26]
  • Pump-Turbine Numerical Investigation of the Effect of Locating Groove on the Runner Cone of a Pump-Turbine on the Vortex Flow in the Draft Tube [Volume 14, Issue 15, 2014, Pages 352-360]
  • Pyrolysis gas Kalman filter for estimating heat flux on moving-ablating- dispensing surface [Volume 14, Issue 1, 2014, Pages 10-18]
Q
  • QRS Complexes Application of a Simple Robust 2-D Pictorial-Geometrical Feature on QRS Complex Detection [Volume 14, Issue 7, 2014, Pages 117-121]
  • Quadrotor Dynamic modeling, simulation and control of a quadrotor using MEMS sensors’ experimental data [Volume 14, Issue 3, 2014, Pages 176-184]
  • Quadrupteron Inverse Dynamic Problem of Two Parallel Manipulators with Identical Limbs Structures [Volume 14, Issue 13, 2014, Pages 281-290]
  • Quality Factor Modeling and calculating the anchor loss quality factor in the plunging-mode vibrations of a micromechanical rectangular-plate resonator with two T-shaped support beams [Volume 14, Issue 12, 2014, Pages 75-84]
  • Quasi-three-dimensional Quasi-Three-Dimensional Aerodynamic Design of S-shaped Air Intake Using Inverse Design Method [Volume 14, Issue 4, 2014, Pages 189-199]
  • Quaternion error vector Hardware-in-the-loop simulation for Attitude Control of a Suborbital Module using Cold Gas Thrusters [Volume 14, Issue 10, 2014, Pages 177-186]
R
  • Radial distribution function Study of the structure and glass transition behavior of epoxy polymers using molecular dynamics [Volume 14, Issue 6, 2014, Pages 107-112]
  • Radiation heat transfer Experimental study on the effect of coal particles injection on flame structure, radiation heat transfer, temperature distribution and thermal efficiency in natural gas diffusion flames [Volume 14, Issue 7, 2014, Pages 163-168]
  • Radiation heat transfer An experimental study on the effect of synchronous combustion of gas- gasoil on luminosity and radiative heat transfer of natural gas flame [Volume 14, Issue 15, 2014, Pages 11-16]
  • Radu pseudospectral Developing a hybrid algorithm to design the optimal trajectory of reentry vehicles [Volume 14, Issue 13, 2014, Pages 143-152]
  • Random distribution Modeling of Friction In Micro/Nano scale with Random Roughness Distribution [Volume 14, Issue 11, 2014, Pages 175-184]
  • Ratcheting Strain Study on strain accumulation of carbon Steel pressurized piping elbows under dynamic out-of-plane bendings [Volume 14, Issue 15, 2014, Pages 218-224]
  • Rayleigh–Ritz approach Free Vibration analysis of Functionally Graded Rectangular plates in contact with bounded fluid [Volume 14, Issue 8, 2014, Pages 165-173]
  • Rayleigh-Ritz method Static analysis of composite box beams by dimensional reduction method [Volume 14, Issue 16, 2014, Pages 367-374]
  • Recess length Investigation of the effects of performance parameters on the flame behavior and temperature distribution and exergy analysis of low swirl premixed burners [Volume 14, Issue 14, 2014, Pages 27-38]
  • Rectangular channel Experimental Study of Gas-Liquid Two-Phase Flow in the Consecutive Inclinations of a Large Bend [Volume 14, Issue 12, 2014, Pages 52-60]
  • Rectangular Plate Static and free vibration analyses of functionally graded sandwich plates using three dimensional theory of elasticity [Volume 14, Issue 10, 2014, Pages 195-204]
  • Rectangular Plate Free Vibration analysis of Functionally Graded Rectangular plates in contact with bounded fluid [Volume 14, Issue 8, 2014, Pages 165-173]
  • Recursive least square Soft Sensor Design for Fault Detection in ALV Pitch Gyro [Volume 14, Issue 7, 2014, Pages 157-162]
  • Reddy plate theory Exact solutions for free vibration of lévy-type rectangular nanoplates via nonlocal third-order plate theory [Volume 14, Issue 7, 2014, Pages 122-130]
  • Redlich-Kwong equation of state Natural Convection Heat Transfer of a Supercritical Fluid in a Vertical channel with isothermal condition [Volume 14, Issue 15, 2014, Pages 33-41]
  • Reduced Order Model Presenting a size-dependent electro-mechanical model for rectangular plates-based resonant micro-sensors based on modified couple stress theory [Volume 14, Issue 8, 2014, Pages 121-130]
  • Reduced Order Modeling Reduced order modeling of unsteady two-phase flows using proper orthogonal decomposition method [Volume 14, Issue 1, 2014, Pages 189-196]
  • Redundancy Joint Space Kinematic Optimization of the Dual-Arm Cam-Lock Robot [Volume 14, Issue 11, 2014, Pages 127-136]
  • Reentry Optimal trajectory design for a space capsule using of multiple interval direct methods [Volume 14, Issue 6, 2014, Pages 63-71]
  • Reentry Developing a hybrid algorithm to design the optimal trajectory of reentry vehicles [Volume 14, Issue 13, 2014, Pages 143-152]
  • Reference Coordinates A new method for selection of reference coordinates in operational modal testing of structures [Volume 14, Issue 3, 2014, Pages 157-166]
  • Reference Coordinates Selection of reference coordinates using effective independence technique in operational modal testing of structures [Volume 14, Issue 4, 2014, Pages 167-176]
  • Refuse Truck Feasibility study and design of hydraulic hybrid powertrain system for a refuse truck [Volume 14, Issue 15, 2014, Pages 307-315]
  • Regenerative Braking Feasibility study and design of hydraulic hybrid powertrain system for a refuse truck [Volume 14, Issue 15, 2014, Pages 307-315]
  • Registration Employing Nelder-Mead Method in Point Clouds Registration Process and Comparison of the Results with Singular Value Decomposition and Genetic Algorithm [Volume 14, Issue 9, 2014, Pages 117-124]
  • Regression model Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology [Volume 14, Issue 15, 2014, Pages 51-58]
  • Rehabilitation Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
  • Reinforced cylindrical shells Fatigue life estimation of bolts in flanges of a reinforced cylindrical shell [Volume 14, Issue 13, 2014, Pages 201-208]
  • Relative humidity Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
  • Reliability System design algorithm for mission oriented systems with reliability approach [Volume 14, Issue 13, 2014, Pages 7-18]
  • Remodeled capillary network A simultaneously solution of interstitial fluid flow in tumor tissue and blood flow in remodeled microvascular network induced by tumor [Volume 14, Issue 9, 2014, Pages 1-9]
  • Repeated impact Experimental and numerical investigation on repeated low velocity impact response of aluminum plate using continuum damage mechanics approach [Volume 14, Issue 6, 2014, Pages 52-62]
  • Representative volume element An investigation on effects of aspect ratio of representative volume element on elastic modulus of a carbon nanotubes reinforced polymer [Volume 14, Issue 9, 2014, Pages 107-116]
  • Residual Generation Residual Generation in Linear Systems with Unmatched Uncertainties for Fault Detection Problems [Volume 14, Issue 7, 2014, Pages 191-198]
  • Residual Stress Numerical and experimental study of temperature and residual stress in multi-pass welding of two stainless steel plates having different thicknesses [Volume 14, Issue 9, 2014, Pages 81-89]
  • Residual Stress Investigation of Residual Stresses in Stress-Relieved Samples by Heat Treatment and Ultrasonic Methods Using Hole-Drilling Method [Volume 14, Issue 15, 2014, Pages 273-278]
  • Resistance spot welding Prediction of fatigue life of spot welding connections subjected to unidirectional dynamic shear load [Volume 14, Issue 15, 2014, Pages 361-368]
  • Respiratory System Numerical simulation of turbulent airflow in a human upper respiratory system [Volume 14, Issue 15, 2014, Pages 267-272]
  • Response surface method Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test [Volume 14, Issue 1, 2014, Pages 149-157]
  • Response Surface Methodology (RSM) Optimization of material removal rate in dry electro-discharge machining process 2 [Volume 14, Issue 12, 2014, Pages 113-121]
  • Response Surface Methodology (RSM) Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology [Volume 14, Issue 15, 2014, Pages 51-58]
  • Response time Study On the Transiant State behavior of Magneto Rheological Fluid in Magnetic Coupling [Volume 14, Issue 12, 2014, Pages 156-162]
  • Restenosis Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
  • Reverse Brayton cycle Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
  • Reverse engineering Employing Nelder-Mead Method in Point Clouds Registration Process and Comparison of the Results with Singular Value Decomposition and Genetic Algorithm [Volume 14, Issue 9, 2014, Pages 117-124]
  • Ribbed rectangular duct Numerical Simulation and Experimental Investigation of the Air-Water Two-Phase Flow Patterns inside a Ribbed Horizontal Duct [Volume 14, Issue 14, 2014, Pages 217-226]
  • Ribs Experimental study on Dynamic Response of grid cylindrical composite structures under high velocity Impact [Volume 14, Issue 2, 2014, Pages 41-46]
  • Ritz method Free vibration analysis of nanotube-reinforced composite truncated conical shell resting on elastic foundation [Volume 14, Issue 12, 2014, Pages 122-132]
  • Robot Gripper Multi-objective optimum design of gripper mechanism using uniform diversity differential evolution [Volume 14, Issue 11, 2014, Pages 204-208]
  • Robust-Adaptive Control Vibration Control of a Flexible Structure by Reconstruction of Control Input Based on Estimation of Undesired Vibration Frequencies [Volume 14, Issue 1, 2014, Pages 197-202]
  • Rock Mechanics Simulation of crack initiation and propagation in hydraulic fracturing of oil wellbore by maximum principal stress criterion [Volume 14, Issue 5, 2014, Pages 164-174]
  • Roll Angle Control of the active anti-roll bar of Off-Road vehicle for roll stability improvement [Volume 14, Issue 10, 2014, Pages 85-92]
  • Rollover index Specifying rollover threshold of Sport Utility Vehicles, using modeling as it moves on two wheels [Volume 14, Issue 9, 2014, Pages 45-56]
  • Rollover modeling Specifying rollover threshold of Sport Utility Vehicles, using modeling as it moves on two wheels [Volume 14, Issue 9, 2014, Pages 45-56]
  • Rollover threshold Specifying rollover threshold of Sport Utility Vehicles, using modeling as it moves on two wheels [Volume 14, Issue 9, 2014, Pages 45-56]
  • Rotary inertia On the effects of core parameters on elasto-dynamic response of Timoshenko composite sandwich beam under moving mass [Volume 14, Issue 2, 2014, Pages 63-69]
  • Rotary vibration tool Rotary vibration tool in Ultrasonic vibration-assisted turning process [Volume 14, Issue 1, 2014, Pages 51-58]
  • Rotating Disc Multi-objective optimum design of an FG Al-SiC rotating disc with temperature dependent properties based on creep behavior [Volume 14, Issue 12, 2014, Pages 23-34]
  • Rotating disk Non Linear Thermoelastic Analysis Of FGM Annular Rotating Discs With FSDT And TSDT Shear Deformation Plate Theories [Volume 14, Issue 1, 2014, Pages 175-188]
  • Rotating disk Onset yield analysis of rotating disks made of functionally graded materials using Tresca yield criterion [Volume 14, Issue 8, 2014, Pages 68-74]
  • Rotating hollow cylinder Analytical Study of Elastic-Plastic Deformation of a Rotating Hollow FGM Cylinder [Volume 14, Issue 5, 2014, Pages 73-82]
  • Rotational Effect 3D Analysis of the Boundary Layer on Wind Turbine Blades [Volume 14, Issue 3, 2014, Pages 119-128]
  • Rough surfaces Modeling of Friction In Micro/Nano scale with Random Roughness Distribution [Volume 14, Issue 11, 2014, Pages 175-184]
  • RRR planar manipulators A comparative study on the manipulability index of RRR planar manipulators [Volume 14, Issue 14, 2014, Pages 299-308]
  • Runner Cone Numerical Investigation of the Effect of Locating Groove on the Runner Cone of a Pump-Turbine on the Vortex Flow in the Draft Tube [Volume 14, Issue 15, 2014, Pages 352-360]
  • Running The roll of fatigue on optimal design of sport footwear [Volume 14, Issue 14, 2014, Pages 167-176]
S
  • Saddle Node Bifurcation Nonlinear Vibrations of Sandwich FG Plates Resting on Nonlinear Pasternak Foundation under Primary Resonance Excitation Using Modified FSDT [Volume 14, Issue 15, 2014, Pages 186-198]
  • SAGE Algorithm Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm [Volume 14, Issue 15, 2014, Pages 241-248]
  • Sandwich beam model Free vibration analysis of bilayer graphenes with interlayer shear effect [Volume 14, Issue 7, 2014, Pages 131-138]
  • Sandwich Composites Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission [Volume 14, Issue 6, 2014, Pages 144-152]
  • Sandwich FG Plate Nonlinear Vibrations of Sandwich FG Plates Resting on Nonlinear Pasternak Foundation under Primary Resonance Excitation Using Modified FSDT [Volume 14, Issue 15, 2014, Pages 186-198]
  • Sandwich panel Experimental investigation on ballistic behavior of sandwich panels made of honeycomb core [Volume 14, Issue 4, 2014, Pages 21-26]
  • Sandwich panel Single-objective and multi-objective optimization of curved sandwich panel with magneto-rheological fluid core using genetic algorithm [Volume 14, Issue 15, 2014, Pages 414-422]
  • Sandwich plate Improvement of the vibrational behavior of the cross ply lamiated sandwich plate by smart elastomeric layer [Volume 14, Issue 11, 2014, Pages 47-58]
  • Sandwich structures Pitch effect on flexural behavior of sandwich structure with composite skins and a corrugated combinatorial core with trapezoidal geometry [Volume 14, Issue 5, 2014, Pages 194-202]
  • Sandwich structures Analytical, experimental and numerical Investigation of Sandwich Panels made of Honeycomb Core subjected projectile impact [Volume 14, Issue 6, 2014, Pages 153-164]
  • Satellite Two-objective Optimization of GEO Communication Satellite Trajectory Considering Impulsive Orbital Maneuver [Volume 14, Issue 5, 2014, Pages 121-128]
  • Satellite Simulator Using Air-Bearing Based Platform and Cold Gas Thruster Actuator for Satellite Attitude Dynamics Simulation [Volume 14, Issue 12, 2014, Pages 1-12]
  • Satellite with flexible panels Dynamics modeling and active vibration control of a satellite with flexible solar panels [Volume 14, Issue 16, 2014, Pages 57-66]
  • Screen Discrete element method to study the impact of different parameters on the screen performance [Volume 14, Issue 9, 2014, Pages 27-34]
  • Screw dislocation Analysis of mode III in infinite plane with multiple cracks based on strain gradient elasticity [Volume 14, Issue 7, 2014, Pages 139-149]
  • SDRE control Proposing optimal chemotherapy protocol for cancer treatment with metastasis by using SDRE based optimal control technique [Volume 14, Issue 10, 2014, Pages 139-149]
  • Second law efficiency Thermodynamic analysis and optimization of a novel ejector- cascade refrigeration cycle [Volume 14, Issue 7, 2014, Pages 85-93]
  • Semi-elliptical crack Explicit expressions of stress intensity factor for external semi-elliptical circumferential cracks in a cylinder under mechanical and thermal loads [Volume 14, Issue 9, 2014, Pages 90-98]
  • Semi-elliptical crack Stress intensity factor for a longitudinal semi-elliptical crack in a thick-walled cylinder under hyperbolic thermal loading [Volume 14, Issue 16, 2014, Pages 143-151]
  • Semi-Sphere Shells Numerical and experimental investigations on buckling and control amount of energy absorption of stainless steel 304L shells with various shapes under axial loading [Volume 14, Issue 3, 2014, Pages 60-68]
  • Semi-submersible drilling platform Analysis of Stress, Strain and Estimation of Fatigue Life of Amir Kabir Semi-Submersible Drilling Platform by using Hot Spot Method in Caspian Sea [Volume 14, Issue 15, 2014, Pages 345-351]
  • Sensitivity Analysis Design of CCHP system for office buildings in Tehran and thermodynamical, environmental and economical evaluation in comparison to conventional system [Volume 14, Issue 6, 2014, Pages 124-134]
  • Sensitivity Analysis Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
  • Sensor Fault Residual Generation in Linear Systems with Unmatched Uncertainties for Fault Detection Problems [Volume 14, Issue 7, 2014, Pages 191-198]
  • Separation Flow 3D Analysis of the Boundary Layer on Wind Turbine Blades [Volume 14, Issue 3, 2014, Pages 119-128]
  • Serial-frame structures Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
  • Servo hydraulic Design and Implementation of a 2DOF Robust controller for Servo-Hydraulic Table [Volume 14, Issue 15, 2014, Pages 207-217]
  • Severe plastic deformation Microstructure, Mechanical and Electrical Properties of Commercially Pure Copper Deformed Severely by Equal Channel Angular Pressing [Volume 14, Issue 15, 2014, Pages 257-266]
  • Shallow Shell Analytic Bifurcation Investigation of Cylindrical Shallow Shells under ‎Lateral Stochastic Excitation [Volume 14, Issue 7, 2014, Pages 77-84]
  • Shape Memory alloy Evaluation of corrugated composite beam deflection by shape memory alloy wire [Volume 14, Issue 8, 2014, Pages 49-58]
  • Shape memory alloy wire Design and dynamic modeling of a module included a compressive spring and actuated by shape memory alloy wire [Volume 14, Issue 14, 2014, Pages 17-26]
  • Shear-lag model Prediction a Range for Elastic Modulus of CNT Reinforced Polymer Composites using Analytical Method [Volume 14, Issue 7, 2014, Pages 52-60]
  • Shell-to-Solid Sub-modeling Fatigue life estimation of bolts in flanges of a reinforced cylindrical shell [Volume 14, Issue 13, 2014, Pages 201-208]
  • Shock Isolation Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction [Volume 14, Issue 4, 2014, Pages 122-128]
  • Shock Wave Modeling and analytical study of progressive collapse of aluminum foam [Volume 14, Issue 9, 2014, Pages 99-106]
  • Shock Wave Theoretical Model to investigate response of aluminum 6061 alloy under high strain rate loading [Volume 14, Issue 13, 2014, Pages 153-162]
  • Shock Wave Experimental Investigation of the Buzz Cycle in a Supersonic Axisymmetric Intake [Volume 14, Issue 16, 2014, Pages 311-320]
  • Shrinkage Non-linear behavior Simulation of the drying of weft knitted fabric by using mass- spring-damper model and straight forward expansion [Volume 14, Issue 1, 2014, Pages 123-130]
  • Simplex Method Identifying two regular interfacial boundary configurations and simultaneously estimation of mechanical properties using Imperialist competitive Algorithm and Simplex method [Volume 14, Issue 10, 2014, Pages 71-79]
  • Simulation of Shaft System Stability analysis of a three-axis power transmission system [Volume 14, Issue 1, 2014, Pages 35-44]
  • Simulator Design of a Real-time Simulator of the Engine-Generator for a Series Hybrid Electric Bus [Volume 14, Issue 4, 2014, Pages 200-206]
  • Simulator Design and Implementation of a Model-in-the-Loop Simulator for Verification of the Vehicle Control Software in a Series Hybrid Electric Bus [Volume 14, Issue 12, 2014, Pages 13-22]
  • Simulink Non Linear Thermoelastic Analysis Of FGM Annular Rotating Discs With FSDT And TSDT Shear Deformation Plate Theories [Volume 14, Issue 1, 2014, Pages 175-188]
  • Single intake Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
  • Single jersey circular knitting machine Identification of broken needle in single jersey circular knitting machine using neural network on yarn fluctuations signals [Volume 14, Issue 16, 2014, Pages 339-348]
  • Single Link Manipulators with Flexible Joint Decentralized Dynamic Output Feedback Controller Design for Consensus in Multi-agent system of Single Link Manipulators with Flexible Joint [Volume 14, Issue 15, 2014, Pages 75-84]
  • Single point incremental forming Numerical and experimental investigation of single point incremental forming of two layer sheet metals [Volume 14, Issue 14, 2014, Pages 1-8]
  • Single point incremental forming An investigation on multistage incremental forming to control thinning in a truncated cone of an aluminum alloy sheet [Volume 14, Issue 14, 2014, Pages 262-270]
  • Single shaft gas turbine Investigating the transient performance of the combined cycle and steam injected gas turbine during frequency dips [Volume 14, Issue 8, 2014, Pages 8-16]
  • Single wall carbon nanotube Free vibration analysis of nanotube-reinforced composite truncated conical shell resting on elastic foundation [Volume 14, Issue 12, 2014, Pages 122-132]
  • Sintering Investigation of machinability of green and sintered iron-jet milled cast iron powder metallurgy parts [Volume 14, Issue 11, 2014, Pages 59-67]
  • Sinusoidal wavy channel Numerical Study of Subcooled Flow Boiling of Water-Al2O3 in Vertical Sinusoidal Wavy Channel [Volume 14, Issue 11, 2014, Pages 195-203]
  • Size effect parameter Analysis of mode III in infinite plane with multiple cracks based on strain gradient elasticity [Volume 14, Issue 7, 2014, Pages 139-149]
  • Skin Friction Experimental drag reduction by injection of air bubbles in a Couette-Taylor system and in turbulent Taylor vortex flow [Volume 14, Issue 1, 2014, Pages 113-122]
  • Skin/Stringer Analysis of composite skin/stringer debonding and failure under static loading using cohesive zone model [Volume 14, Issue 10, 2014, Pages 17-25]
  • Sliding mode control Precise position control of mechanical systems with friction based on dynamic LuGre mode [Volume 14, Issue 1, 2014, Pages 1-9]
  • Sloshing fluid Free Vibration analysis of Functionally Graded Rectangular plates in contact with bounded fluid [Volume 14, Issue 8, 2014, Pages 165-173]
  • Slug flow Experimental investigation of the effect of hilly-terrain duct on gas-liquid flow [Volume 14, Issue 7, 2014, Pages 94-102]
  • Slug Frequency Slug Frequency Evaluation in Long Horizontal Channel by Experimental Method [Volume 14, Issue 2, 2014, Pages 141-149]
  • Slug Initiation Position Experimental Investigation of Slug Initiation Dependency to Upstream Conditions of Two Phases in Long Horizontal Channels in Two-Fluid Flow [Volume 14, Issue 3, 2014, Pages 27-35]
  • Slug regime Three Dimensional Simulation of Two-Phase Slug Flow Regime In a Horizontal Channel Using VOF Method [Volume 14, Issue 7, 2014, Pages 176-182]
  • Smart cylinder Analysis of FGPM cylinder subjected to two dimensional electro thermo mechanical fields [Volume 14, Issue 4, 2014, Pages 83-90]
  • Smart Plate Free vibration and Low velocity impact Analysis of sandwich plates with Smart Flexible cores [Volume 14, Issue 13, 2014, Pages 191-200]
  • Smeared method Buckling behavior investigation of grid stiffened composite conical shells under axial loading [Volume 14, Issue 15, 2014, Pages 170-176]
  • Smoothed Particle Hydrodynamics Numerical investigation of the mixing performance of two-blade twin and circular mixers by using an improved Weakly Compressible Smoothed Particle Hydrodynamics [Volume 14, Issue 11, 2014, Pages 97-105]
  • SMURF Model updating of damped structures using SMURF technique [Volume 14, Issue 4, 2014, Pages 65-74]
  • Snake like Robotic Arm Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
  • Soft nanobacteria Simulation of soft bacteria contact to be applied in nanomanipulation [Volume 14, Issue 14, 2014, Pages 227-234]
  • Soft Tissue and Tumor Artificial tactile sensing capability in tumor detection of the liver tissue utilizing in vitro experimental data and hyperelastic finite element modeling [Volume 14, Issue 15, 2014, Pages 388-394]
  • Solar Panel Deployment System design algorithm for mission oriented systems with reliability approach [Volume 14, Issue 13, 2014, Pages 7-18]
  • Sound transmission loss Vibro-acoustic study on transverse-isotropic thick-walled cylindrical shells considering high shear deformation theory using Hamilton principle [Volume 14, Issue 4, 2014, Pages 147-157]
  • Sound transmission loss Power Sound Transmission through Double-Walled Laminated Composite Panel with Intermediate Porous Layer Considering Different Boundary Conditions [Volume 14, Issue 6, 2014, Pages 11-21]
  • Space control system Optimal layout design for a space control system modules using a gradient- based method [Volume 14, Issue 16, 2014, Pages 272-282]
  • Spacecraft Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
  • Spark Ignition Engines Modeling and Simulation of Combustion in SI Engines via Neural Networks and Investigation of Calibration and Data Acquisition in the GT-Power [Volume 14, Issue 13, 2014, Pages 233-244]
  • Spherical lens Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
  • Spherical tool Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
  • Spin-Bonding Production of Bilayer Al/St Tubes by Cold Spin Bonding and Investigation of Different Parameters on Bonding Strength of Layers [Volume 14, Issue 15, 2014, Pages 111-118]
  • Spinning flight vehicle Performance investigation of control and guidance system for a spinning flight vehicle with dithering canard [Volume 14, Issue 7, 2014, Pages 169-175]
  • Sport Utility Vehicle Specifying rollover threshold of Sport Utility Vehicles, using modeling as it moves on two wheels [Volume 14, Issue 9, 2014, Pages 45-56]
  • Spring Static Balancing of Parallel Planar 3-DOF Mechanisms, 3-RRR, 3-PRR, 3-RPR and static balancing of variable weights [Volume 14, Issue 16, 2014, Pages 321-331]
  • Spring-back Design and Manufacture of Vibratory Forming Tool to Develop “Ultrasonic Vibration assisted Incremental Sheet Metal Forming” Process [Volume 14, Issue 11, 2014, Pages 68-76]
  • Spur gear Study on the Performance of Spur Gears in Mixed- Elastohydrodynamic Lubrication [Volume 14, Issue 7, 2014, Pages 10-16]
  • SQP Algorithm Optimal layout design for a space control system modules using a gradient- based method [Volume 14, Issue 16, 2014, Pages 272-282]
  • Square rod Experimental Study of Turbulent Layers with Different Obstacles to Stimulate Optimal Point Augmentation in Heat Transfer Coefficient [Volume 14, Issue 3, 2014, Pages 43-50]
  • Squeeze film damping Effect of fluid media on vibration of a microbeam resonator using micropolar theory [Volume 14, Issue 10, 2014, Pages 205-210]
  • S-shaped air intake Quasi-Three-Dimensional Aerodynamic Design of S-shaped Air Intake Using Inverse Design Method [Volume 14, Issue 4, 2014, Pages 189-199]
  • Stability The effect of damping ratio and balls mass on the stability of automatic ball balancer and determining their optimum values [Volume 14, Issue 3, 2014, Pages 110-118]
  • Stability Investigating the stability of automatic ball-balancer under the gyroscopic effect and optimization of its parameters using the Nelder-Mead simplex algorithm [Volume 14, Issue 14, 2014, Pages 155-166]
  • Stability analysis Stability analysis of a three-axis power transmission system [Volume 14, Issue 1, 2014, Pages 35-44]
  • Stability analysis Mathematical and Numerical Modeling along with the Stability Analysis of Liquid Propellant Rocket Engine Cut-off Valve [Volume 14, Issue 8, 2014, Pages 95-102]
  • Stability analysis Obtaining Stable Cardan Angles in Rotating Systems and Investigating the Effective Parameters on System Stability [Volume 14, Issue 12, 2014, Pages 163-170]
  • Staggered mesh Numerical Simulation of Non-Newtonian fluid ï‌‚ows through a channel with a cavity [Volume 14, Issue 6, 2014, Pages 35-40]
  • Stall Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
  • Stall Parametric Study of Ocean Wave Turbine (Wells Type) over the Floating Oscillating Platform: A Numerical Analysis [Volume 14, Issue 13, 2014, Pages 77-85]
  • State Estimation Optimal Design of Mixed Kalman-H infinity Filter Using Multi-objective Optimization Method [Volume 14, Issue 2, 2014, Pages 128-132]
  • Static and free vibration analyses Static and free vibration analyses of functionally graded sandwich plates using three dimensional theory of elasticity [Volume 14, Issue 10, 2014, Pages 195-204]
  • Static Balance Static Balancing of Parallel Planar 3-DOF Mechanisms, 3-RRR, 3-PRR, 3-RPR and static balancing of variable weights [Volume 14, Issue 16, 2014, Pages 321-331]
  • Statistical Energy Analysis (SEA) Power Sound Transmission through Double-Walled Laminated Composite Panel with Intermediate Porous Layer Considering Different Boundary Conditions [Volume 14, Issue 6, 2014, Pages 11-21]
  • Stator turbine blade Optimization of CUSP Technique Using Inverse Modeling for Improvement of Jameson’s 2-D Finite Volume Method [Volume 14, Issue 8, 2014, Pages 174-182]
  • Steady Asymmetric Flame Dynamics of lean hydrogen/air flame regimes in micro scale combustion [Volume 14, Issue 3, 2014, Pages 94-102]
  • Steady-state solution Specifying rollover threshold of Sport Utility Vehicles, using modeling as it moves on two wheels [Volume 14, Issue 9, 2014, Pages 45-56]
  • Steady Symmetry Flame Dynamics of lean hydrogen/air flame regimes in micro scale combustion [Volume 14, Issue 3, 2014, Pages 94-102]
  • Stenosis Numerical simulation of unsteady blood flow through an elastic artery with a non-symmetric stenosis [Volume 14, Issue 10, 2014, Pages 26-34]
  • Stenotic Artery Assessing the influence of stent geometry and material properties on the outcome after coronary stenting using finite element method [Volume 14, Issue 4, 2014, Pages 45-53]
  • Stepped Tip Gap Computational Analysis of Stepped Tip Gap Casing Effect on Performance of a Centrifugal Compressor [Volume 14, Issue 3, 2014, Pages 136-144]
  • Stiffness Robotic rehabilitation with the elbow stiffness adjustability [Volume 14, Issue 11, 2014, Pages 151-158]
  • Stiffness degradation Fatigue life prediction of polymeric composites based on the simultaneous degradation of stiffness and strength under two-stage loading [Volume 14, Issue 14, 2014, Pages 137-142]
  • Stiffness Graded Plate Effect of placement and material properties of tibial plate on stress pattern at fractured site [Volume 14, Issue 11, 2014, Pages 159-165]
  • Stir Zone Microstructure Study on joint zone Microstructure Evolution and Hardness in Friction Stir welding of AA1100 Aluminum alloy to A441 AISI steel [Volume 14, Issue 14, 2014, Pages 97-107]
  • Stochastic Hybrid Systems Stability Analysis for Stochastic Piecewise Affine Systems with Verification via Generalized Fokker Planck Equations [Volume 14, Issue 16, 2014, Pages 243-251]
  • Stochastic Stability Stability Analysis for Stochastic Piecewise Affine Systems with Verification via Generalized Fokker Planck Equations [Volume 14, Issue 16, 2014, Pages 243-251]
  • Stop hole Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
  • Straight Forward Expansion Non-linear behavior Simulation of the drying of weft knitted fabric by using mass- spring-damper model and straight forward expansion [Volume 14, Issue 1, 2014, Pages 123-130]
  • Strain Energy Function Acoustic emission based study to monitor the initiation and growth of delamination in composite materials [Volume 14, Issue 3, 2014, Pages 78-84]
  • Strain gradient theory Analysis of mode III in infinite plane with multiple cracks based on strain gradient elasticity [Volume 14, Issue 7, 2014, Pages 139-149]
  • Strain hardening Study on strain accumulation of carbon Steel pressurized piping elbows under dynamic out-of-plane bendings [Volume 14, Issue 15, 2014, Pages 218-224]
  • Strain rate An investigation into strain rate dependency of Chaboche plasticity model [Volume 14, Issue 14, 2014, Pages 9-16]
  • Strain rate Numerical study of the effect of strain rate on damage prediction by dynamic forming limit diagram in high velocity sheet metal forming [Volume 14, Issue 16, 2014, Pages 212-222]
  • Stream Line Identifying the vibration excitation location and energy stream-lines in a thin vibrating plate by using acoustical measurements [Volume 14, Issue 11, 2014, Pages 18-28]
  • Strength of vortices Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
  • Stress Corrosion Cracking An Investigation to Corrosion of Stainless Steels by Acoustic Emission Method [Volume 14, Issue 2, 2014, Pages 195-200]
  • Stress Intensity Factor Explicit expressions of stress intensity factor for external semi-elliptical circumferential cracks in a cylinder under mechanical and thermal loads [Volume 14, Issue 9, 2014, Pages 90-98]
  • Stress Intensity Factor Evaluation of stress intensity factors of a center cracked curved plate in the presence of crack flank stop drill holes [Volume 14, Issue 9, 2014, Pages 133-139]
  • Stress Intensity Factor Analysis of mode III in infinite plane with multiple cracks based on strain gradient elasticity [Volume 14, Issue 7, 2014, Pages 139-149]
  • Stress Intensity Factor Investigation of pressure gradient effect on stress intensity factor variations in autofrettaged cracked thick-walled tubes using two dimensional weight function method [Volume 14, Issue 8, 2014, Pages 137-145]
  • Stress Intensity Factor Stress intensity factor for a longitudinal semi-elliptical crack in a thick-walled cylinder under hyperbolic thermal loading [Volume 14, Issue 16, 2014, Pages 143-151]
  • Stress-Relieved Investigation of Residual Stresses in Stress-Relieved Samples by Heat Treatment and Ultrasonic Methods Using Hole-Drilling Method [Volume 14, Issue 15, 2014, Pages 273-278]
  • Stress Shielding Effect of placement and material properties of tibial plate on stress pattern at fractured site [Volume 14, Issue 11, 2014, Pages 159-165]
  • Stretching Study of nanomechanical behavior of double-stranded DNA molecule under tensile forces [Volume 14, Issue 12, 2014, Pages 104-112]
  • Stroke and Spinal Cord Injury Rehabilitation Robots Control in Gait Training Exercises on a Treadmill [Volume 14, Issue 8, 2014, Pages 157-164]
  • Structural index Preliminary design of compression stiffened panel using structural index concept [Volume 14, Issue 13, 2014, Pages 67-76]
  • Structural response The Study of Various Clamped Isotropic Square Plate Simulating Methods and Compare with Experimental Results under Explosion Loads [Volume 14, Issue 13, 2014, Pages 315-322]
  • Subcooled boiling Numerical Study of Subcooled Flow Boiling of Water-Al2O3 in Vertical Sinusoidal Wavy Channel [Volume 14, Issue 11, 2014, Pages 195-203]
  • Suborbital Module Hardware-in-the-loop simulation for Attitude Control of a Suborbital Module using Cold Gas Thrusters [Volume 14, Issue 10, 2014, Pages 177-186]
  • Supersonic Flow Experimental Investigation of the Buzz Cycle in a Supersonic Axisymmetric Intake [Volume 14, Issue 16, 2014, Pages 311-320]
  • Surface Continuity Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
  • Surface Normal Vector Using homogeneous neighborhood in point clouds normal vector calculation [Volume 14, Issue 5, 2014, Pages 155-163]
  • Surface roughness Rotary vibration tool in Ultrasonic vibration-assisted turning process [Volume 14, Issue 1, 2014, Pages 51-58]
  • Surface roughness Investigation of tool life with Simple and viper ceramic tools in near dry machining in high speed turning [Volume 14, Issue 1, 2014, Pages 83-88]
  • Surface roughness Experimental study of the near dry EDM process [Volume 14, Issue 1, 2014, Pages 106-112]
  • Surface roughness Experimental study on the influence of CuO nanofluid on surface roughness and machining force in turning of AISI 4340 steel [Volume 14, Issue 2, 2014, Pages 27-33]
  • Surface roughness Experimental investigation of the effects of machining parameters and lubrication on consumed power and surface roughness in CK45 steel milling [Volume 14, Issue 10, 2014, Pages 80-84]
  • Surface roughness Prediction of Performance of Helical Gears Under Mixed- Lubrication Regime [Volume 14, Issue 10, 2014, Pages 167-176]
  • Surface roughness Evaluation of workpiece hardness and cutting parameters effects on cutting force and surface roughness in drilling using vegetable-based cutting fluid [Volume 14, Issue 13, 2014, Pages 265-271]
  • Surface roughness Effect of cutting fluid application on surface roughness in hard milling of 4340-alloyed steel [Volume 14, Issue 14, 2014, Pages 50-60]
  • Surface Stress Effect Nonlinear forced vibration analysis of functionally graded nanobeams in thermal environments with considering surface stress and nonlocal effects [Volume 14, Issue 16, 2014, Pages 17-26]
  • Surface vortex Investigating the effect of intake withdrawal direction on critical submergence and strength of vortices [Volume 14, Issue 10, 2014, Pages 35-42]
  • Surrogate Model Surrogate Model-based Optimization of Spacecraft Design [Volume 14, Issue 13, 2014, Pages 209-216]
  • Swirler Investigation of the effects of performance parameters on the flame behavior and temperature distribution and exergy analysis of low swirl premixed burners [Volume 14, Issue 14, 2014, Pages 27-38]
  • Swirl injector Experimental characterization of a swirl injector with tangential inlets [Volume 14, Issue 10, 2014, Pages 59-62]
  • Symmetric Composite Laminates Stress analysis of symmetric composite laminates with quasi-rectangular hole subjected to in-plane loading [Volume 14, Issue 15, 2014, Pages 395-404]
  • Symmetric Cross-Ply Laminate Interlaminar stresses in symmetric cross-ply composite laminates using Layerwise theory [Volume 14, Issue 1, 2014, Pages 59-66]
  • Synchronous combustion An experimental study on the effect of synchronous combustion of gas- gasoil on luminosity and radiative heat transfer of natural gas flame [Volume 14, Issue 15, 2014, Pages 11-16]
  • Syntactic foam Experimental investigation of fabrication parameters` effects on the mechanical properties of epoxy/ceramic microballoon syntactic foams [Volume 14, Issue 2, 2014, Pages 47-54]
  • Syntactic foam Volume fraction and microballoon size effects on the compressive properties of epoxy/ceramic microballoon syntactic foam [Volume 14, Issue 4, 2014, Pages 37-44]
  • System efficiency Offering a semi-analytical model to evaluate efficiency of PEM fuel cell system using ejector in fuel supply circuit [Volume 14, Issue 13, 2014, Pages 59-66]
T
  • Taguchi method Experimental investigation of the effects of machining parameters and lubrication on consumed power and surface roughness in CK45 steel milling [Volume 14, Issue 10, 2014, Pages 80-84]
  • Taguchi method Cutting of Ti6Al4V titanium alloy using abrasive water jet and multiobjective optimization of geometry features [Volume 14, Issue 16, 2014, Pages 67-75]
  • Tapping Mode Nonlinear vibration analysis of an atomic force microscope microcantilever in the tapping mode based on the modified couple stress theory [Volume 14, Issue 11, 2014, Pages 9-17]
  • Tarbiat Modares University Turbulent wind flow simulation over Tarbiat Modares University [Volume 14, Issue 13, 2014, Pages 272-280]
  • Taylor Bubbles Experimental study of length, velocity and frequency of taylor bubbles in gas-liquid two-phase flow in a large bend [Volume 14, Issue 12, 2014, Pages 133-144]
  • Taylor-Couette Experimental drag reduction by injection of air bubbles in a Couette-Taylor system and in turbulent Taylor vortex flow [Volume 14, Issue 1, 2014, Pages 113-122]
  • Temperature An experimental study of temperature effect on low-velocity impact response of notched aluminum plates repaired by FML composite patches [Volume 14, Issue 9, 2014, Pages 175-182]
  • Temperature Effect of impactor shape and temperature on the behavior of E-glass/epoxy composite laminates [Volume 14, Issue 10, 2014, Pages 1-8]
  • Temperature distribution Numerical and experimental study of temperature and residual stress in multi-pass welding of two stainless steel plates having different thicknesses [Volume 14, Issue 9, 2014, Pages 81-89]
  • Temperature distribution Investigation of the effects of performance parameters on the flame behavior and temperature distribution and exergy analysis of low swirl premixed burners [Volume 14, Issue 14, 2014, Pages 27-38]
  • Tensile properties Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles [Volume 14, Issue 7, 2014, Pages 103-108]
  • TERCOM Navigation Error Effect in the Terrain Following Based Constraint Optimal Trajectory Design for UAVs [Volume 14, Issue 12, 2014, Pages 145-155]
  • The Nelder-Mead simplex algorithm Investigating the stability of automatic ball-balancer under the gyroscopic effect and optimization of its parameters using the Nelder-Mead simplex algorithm [Volume 14, Issue 14, 2014, Pages 155-166]
  • Thermal and Mechanical Loading Explicit expressions of stress intensity factor for external semi-elliptical circumferential cracks in a cylinder under mechanical and thermal loads [Volume 14, Issue 9, 2014, Pages 90-98]
  • Thermal Comfort Evaluation of Thermal and Moisture Inertia Effects in Clothing and Gagge’s Model Modification for Body Thermal Sensation and Physiological Responses Estimation [Volume 14, Issue 3, 2014, Pages 167-175]
  • Thermal Comfort Investigating the effect of supply air temperature on thermal comfort and indoor air quality for a displacement ventilated room in summer [Volume 14, Issue 9, 2014, Pages 35-44]
  • Thermal Comfort The effect of air infiltration from window gaps on the performance of baseboard heating system and occupants’ thermal comfort conditions [Volume 14, Issue 8, 2014, Pages 113-120]
  • Thermal Comfort Investigating the effect of return air vent height on energy consumption, thermal comfort, and air quality in under floor air distribution system [Volume 14, Issue 16, 2014, Pages 125-133]
  • Thermal conductivity coefficient Numerical simulation of heat transfer enhancement effect in adsorbent bed on the performance of adsorption system [Volume 14, Issue 8, 2014, Pages 103-112]
  • Thermal demand management Design of CCHP system for office buildings in Tehran and thermodynamical, environmental and economical evaluation in comparison to conventional system [Volume 14, Issue 6, 2014, Pages 124-134]
  • Thermal demand management Multi-criteria evaluation of CCHP system under different operating strategies for an office building in Tehran using AHP method [Volume 14, Issue 8, 2014, Pages 37-48]
  • Thermal expansion coefficient Natural Convection Heat Transfer of a Supercritical Fluid in a Vertical channel with isothermal condition [Volume 14, Issue 15, 2014, Pages 33-41]
  • Thermal mechanism Numerical analysis of effects of primary aeration on NOX production in a model gas turbine combustion chamber [Volume 14, Issue 10, 2014, Pages 101-108]
  • Thermal shock Analysis of sandwich cylindrical shell with FGM core subjected to thermal shock [Volume 14, Issue 5, 2014, Pages 175-182]
  • Thermal shock Nonlocal elasticity theory for thermo-elastic analysis of nanoscale spherical shell subjected to thermal shock [Volume 14, Issue 9, 2014, Pages 65-72]
  • Thermodynamic properties Applicability of fundamental equations of state in Simulation of Cryogenic Systems; Case Study: Reverse Brayton cryocooler for HTS cable [Volume 14, Issue 15, 2014, Pages 103-110]
  • Thermoelastic Non Linear Thermoelastic Analysis Of FGM Annular Rotating Discs With FSDT And TSDT Shear Deformation Plate Theories [Volume 14, Issue 1, 2014, Pages 175-188]
  • Thermo-mechanical Steel Pipe Effects of surface crack length and depth variations on gas transmission pipeline safety [Volume 14, Issue 5, 2014, Pages 26-32]
  • The thin shell theory of Flugge Stability analysis of weight optimum waffle cylindrical shells -A new approach [Volume 14, Issue 14, 2014, Pages 177-184]
  • Thick Cylindrical Shell Vibro-acoustic study on transverse-isotropic thick-walled cylindrical shells considering high shear deformation theory using Hamilton principle [Volume 14, Issue 4, 2014, Pages 147-157]
  • Thick-Walled Cylinder Stress intensity factor for a longitudinal semi-elliptical crack in a thick-walled cylinder under hyperbolic thermal loading [Volume 14, Issue 16, 2014, Pages 143-151]
  • Thick-Walled Tube Investigation of pressure gradient effect on stress intensity factor variations in autofrettaged cracked thick-walled tubes using two dimensional weight function method [Volume 14, Issue 8, 2014, Pages 137-145]
  • Thinning percent Forming of metallic bipolar plate with pin-type pattern by using hydroforming process in convex die [Volume 14, Issue 10, 2014, Pages 150-158]
  • Thin-walled curved structures A review on fracture mechanics test methods on non-standard thin-walled curved specimens [Volume 14, Issue 14, 2014, Pages 79-88]
  • Third-order shear deformation theory Vibro-acoustic study on transverse-isotropic thick-walled cylindrical shells considering high shear deformation theory using Hamilton principle [Volume 14, Issue 4, 2014, Pages 147-157]
  • Three dimensional Static and free vibration analyses of functionally graded sandwich plates using three dimensional theory of elasticity [Volume 14, Issue 10, 2014, Pages 195-204]
  • Three- dimensional Elasticity Theory Frequency analysis of rectangular holed FG plates using three dimensional elasticity theory and meshless method [Volume 14, Issue 16, 2014, Pages 134-142]
  • Three Dimensional Elasticity Theory An investigation into the three dimensional dynamic analysis and stress wave propagation in thick functionally graded plates under impact loading [Volume 14, Issue 11, 2014, Pages 89-96]
  • Three- dimensional Functionally Graded Material Frequency analysis of rectangular holed FG plates using three dimensional elasticity theory and meshless method [Volume 14, Issue 16, 2014, Pages 134-142]
  • Three Dimensional Graded Finite Element Method An investigation into the three dimensional dynamic analysis and stress wave propagation in thick functionally graded plates under impact loading [Volume 14, Issue 11, 2014, Pages 89-96]
  • Thrust Force Experimental and Analytical Investigation of Thrust Force In Ultrasonic Assisted Drilling of Bone [Volume 14, Issue 6, 2014, Pages 194-200]
  • Ti-6Al-4V titanium alloy Cutting of Ti6Al4V titanium alloy using abrasive water jet and multiobjective optimization of geometry features [Volume 14, Issue 16, 2014, Pages 67-75]
  • TiAlN coating Qualitative Evaluation of Mechanical Properties of TiAlN Nanostructured Coatings Deposited on Cutting Tools by Analysis of XRD Results [Volume 14, Issue 12, 2014, Pages 61-66]
  • Time-Frequency Marginal Integral Tool wear condition monitoring using time- frequency marginal integral of motor current signal [Volume 14, Issue 16, 2014, Pages 181-189]
  • Timoshenko Dynamic modeling of visco-elastic robotic manipulators using Timoshenko beam theory [Volume 14, Issue 1, 2014, Pages 131-139]
  • Timoshenko Beam Theory Free whirling analysis of multi-step Timoshenko rotor with multiple bearing using DQEM [Volume 14, Issue 10, 2014, Pages 109-120]
  • Timoshenko Beam Theory Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
  • Titanium dioxide nanoparticles Mechanical and thermal properties of nanocomposites based on polypropylene/linear low density polyethylene/titanium dioxide [Volume 14, Issue 3, 2014, Pages 103-109]
  • TMM Optimization of power transmission interaction of multilayered panel using genetic algorithm [Volume 14, Issue 1, 2014, Pages 27-34]
  • Tolerance Analysis of Compliant Sheet Metal Assemblies Tolerance analysis of flexible sheet metal structures including effects of contact interaction and surface continuity of components [Volume 14, Issue 12, 2014, Pages 199-208]
  • Tonpilz transducer Simulation and optimization of Tonpilz transducer by FEM and comparing the results with electroacoustic tests [Volume 14, Issue 10, 2014, Pages 63-70]
  • Tool Electrode Wear Investigation on Performance of Ultra Fine Grained Pure Copper as Electrode during Electrical Discharge Machining [Volume 14, Issue 1, 2014, Pages 97-105]
  • Tool Influence Function Polishing of spherical lenses using spherical tool on a 3-axis computer numerical control machine [Volume 14, Issue 13, 2014, Pages 217-223]
  • Tool Material Experimental study of the near dry EDM process [Volume 14, Issue 1, 2014, Pages 106-112]
  • Tool Rotation Experimental investigation on the effective parameters on forming force, dimensional accuracy and thickness distribution in single point incremental forming [Volume 14, Issue 1, 2014, Pages 89-96]
  • Tool wear Investigation of tool life with Simple and viper ceramic tools in near dry machining in high speed turning [Volume 14, Issue 1, 2014, Pages 83-88]
  • Tool wear Tool wear condition monitoring using time- frequency marginal integral of motor current signal [Volume 14, Issue 16, 2014, Pages 181-189]
  • Tool wear mechanisms Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology [Volume 14, Issue 15, 2014, Pages 51-58]
  • Tool Wear Ratio Experimental study of the near dry EDM process [Volume 14, Issue 1, 2014, Pages 106-112]
  • Tornado Numerical Investigation on Damage Patterns of Low Swirl Translating Tornadoes [Volume 14, Issue 6, 2014, Pages 81-90]
  • Towing Tank A Numerical and Experimental Investigation of Effect of Control Surface Angle on an Autonomous Underwater Vehicle Drag [Volume 14, Issue 16, 2014, Pages 358-366]
  • Trajectory Design Navigation Error Effect in the Terrain Following Based Constraint Optimal Trajectory Design for UAVs [Volume 14, Issue 12, 2014, Pages 145-155]
  • Trajectory Planning Optimal trajectory design for a space capsule using of multiple interval direct methods [Volume 14, Issue 6, 2014, Pages 63-71]
  • Trajectory tracking Design and Implementation of a Fuzzy Sliding Mode Control Law for a Wheeled Robot Towing a Trailer [Volume 14, Issue 4, 2014, Pages 91-98]
  • Trajectory tracking Trajectory tracking control of a wheeled mobile robot by a non-model-based control algorithm using PD-action filtered errors [Volume 14, Issue 12, 2014, Pages 171-178]
  • Transfer Function Estimation of Transfer Functions for Wave Measurement Buoy using Field Data [Volume 14, Issue 8, 2014, Pages 131-136]
  • Transfer Matrix Method Vibration analysis of a multi-span Timoshenko beam with flexible constraints subjected to a two degrees-of-freedom moving system [Volume 14, Issue 14, 2014, Pages 282-290]
  • Transient State Study On the Transiant State behavior of Magneto Rheological Fluid in Magnetic Coupling [Volume 14, Issue 12, 2014, Pages 156-162]
  • Transient thermal simulation Numerical simulation of thermal history in mold and casting during horizontal centrifugal casting of dutcile iron pipes [Volume 14, Issue 6, 2014, Pages 185-193]
  • Transition Numerical Study about Role of Ground Effect on Flow Transition fromLaminar to Turbulent Regime at Low Reynolds Numbers [Volume 14, Issue 9, 2014, Pages 203-210]
  • Transmit voltage response Simulation and optimization of Tonpilz transducer by FEM and comparing the results with electroacoustic tests [Volume 14, Issue 10, 2014, Pages 63-70]
  • Transverse Forcing Excitation Nonlinear Vibrations of Sandwich FG Plates Resting on Nonlinear Pasternak Foundation under Primary Resonance Excitation Using Modified FSDT [Volume 14, Issue 15, 2014, Pages 186-198]
  • Transverse-isotropic Vibro-acoustic study on transverse-isotropic thick-walled cylindrical shells considering high shear deformation theory using Hamilton principle [Volume 14, Issue 4, 2014, Pages 147-157]
  • Transversely isotropic fiber Multiple Scattering of an Acoustic Wave from Fibers Encased in a Solid Viscoelastic Medium [Volume 14, Issue 15, 2014, Pages 423-430]
  • Transverse rupture strength Optimization of mechanical properties of iron-based recycled powder metallurgy parts and investigation of these properties by transverse rupture test [Volume 14, Issue 1, 2014, Pages 149-157]
  • Trapezoidal beam Investigating Energy Harvesting from Unimorph Trapezoidal Beam Vibrations Using Distributed Parameters Method [Volume 14, Issue 15, 2014, Pages 96-102]
  • Trapezoidal enclosure Effects of magnetic field on mixed convection heat transfer and entropy generation of Cu-water nanofluid in a trapezoidal enclosure [Volume 14, Issue 9, 2014, Pages 183-194]
  • Trapezoid cavity Mixed convection in a trapezoidal enclosure filled with Cu-water nanofluid [Volume 14, Issue 6, 2014, Pages 41-51]
  • Tresca associated plasticity Analytical Study of Elastic-Plastic Deformation of a Rotating Hollow FGM Cylinder [Volume 14, Issue 5, 2014, Pages 73-82]
  • Tresca Criterion Onset yield analysis of rotating disks made of functionally graded materials using Tresca yield criterion [Volume 14, Issue 8, 2014, Pages 68-74]
  • Tripteron Inverse Dynamic Problem of Two Parallel Manipulators with Identical Limbs Structures [Volume 14, Issue 13, 2014, Pages 281-290]
  • T shape cavity Magnetic field effect on nanofluid water-cu natural convection in an inclined T shape cavity [Volume 14, Issue 12, 2014, Pages 179-189]
  • T-shape tube hydroforming Studying the stress-strain curve of C12200 Copper tube using hydraulic bulge test in T-shape die [Volume 14, Issue 13, 2014, Pages 95-106]
  • Tube Development of a novel forward extrusion process for producing large-diameter tubes from small billets [Volume 14, Issue 14, 2014, Pages 143-147]
  • Tube bending A novel technique for Push bending of thin walled tubes in hydrobending [Volume 14, Issue 12, 2014, Pages 190-198]
  • Tube-bundle Numerical simulation and thermohydraulic performance analysis of tube-bundle in Multi-effect distillation systems to investigate the risk of precipitation [Volume 14, Issue 15, 2014, Pages 145-154]
  • Tube hydroforming Analytical Prediction of Limit Strains and Limit Stresses in Hydroforming of Anisotropic Aluminum Tubes [Volume 14, Issue 2, 2014, Pages 133-140]
  • Tube hydroforming Improve the formability in tube hydroforming process using ultrasonic vibrations [Volume 14, Issue 5, 2014, Pages 63-72]
  • Tube hydroforming Experimental and numerical study of formability in stainless steel 304 tube by hydroforming process [Volume 14, Issue 13, 2014, Pages 224-232]
  • Tumor A simultaneously solution of interstitial fluid flow in tumor tissue and blood flow in remodeled microvascular network induced by tumor [Volume 14, Issue 9, 2014, Pages 1-9]
  • Tumor Mechanical Effects of Extra-cellular Matrix on Growth and Migration of Endothelial Cells in Tumor-induced Angiogenesis [Volume 14, Issue 7, 2014, Pages 1-9]
  • Tungsten disulfide Studying the mechanical properties of monolayer tungsten disulfide (WS2) nanosheets [Volume 14, Issue 5, 2014, Pages 11-14]
  • Tunnel Drag Reduction in a High-Speed Planing Hull Using Tunnels [Volume 14, Issue 3, 2014, Pages 51-59]
  • Tunnel Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
  • Tunnel blockage Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
  • Tunnel slope Parametric study on critical ventilation velocity in case of fire inside longitudinally ventilated tunnels [Volume 14, Issue 5, 2014, Pages 1-10]
  • Tunnel slope Study on the effect of tunnel slope and blockage on critical velocity in urban tunnels [Volume 14, Issue 11, 2014, Pages 37-46]
  • Turbine Study and numerical simulation of blades corrosion effects on a commercial axial turbine performance [Volume 14, Issue 15, 2014, Pages 279-289]
  • Turbulent boundary layer Experimental Study of Turbulent Layers with Different Obstacles to Stimulate Optimal Point Augmentation in Heat Transfer Coefficient [Volume 14, Issue 3, 2014, Pages 43-50]
  • Turbulent Channel Flow Study of vortical structures in a microfiber-induced drag-reduced turbulent channel flow using DNS [Volume 14, Issue 3, 2014, Pages 85-93]
  • Turbulent Channel Flow A new algebraic model based on the velocity correlation tensor for DNS of turbulent drag reduction by microfiber additives [Volume 14, Issue 16, 2014, Pages 223-230]
  • Turbulent flow Experimental drag reduction by injection of air bubbles in a Couette-Taylor system and in turbulent Taylor vortex flow [Volume 14, Issue 1, 2014, Pages 113-122]
  • Turbulent flow Numerical study of flow characteristics around a NACA 4412 asymmetric airfoil under the influence of electric field [Volume 14, Issue 5, 2014, Pages 147-154]
  • Turbulent flow Numerical simulation of turbulent airflow in a human upper respiratory system [Volume 14, Issue 15, 2014, Pages 267-272]
  • Turning Rotary vibration tool in Ultrasonic vibration-assisted turning process [Volume 14, Issue 1, 2014, Pages 51-58]
  • Turning Investigation of tool life with Simple and viper ceramic tools in near dry machining in high speed turning [Volume 14, Issue 1, 2014, Pages 83-88]
  • Turning Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology [Volume 14, Issue 15, 2014, Pages 51-58]
  • Turning process Nonlinear analysis of chatter in turning process considering workpiece and cutting tool dynamics simultaneously [Volume 14, Issue 4, 2014, Pages 177-188]
  • Twin chamber Numerical investigation of the mixing performance of two-blade twin and circular mixers by using an improved Weakly Compressible Smoothed Particle Hydrodynamics [Volume 14, Issue 11, 2014, Pages 97-105]
  • Two degree-of-freedom controller Design and Implementation of a 2DOF Robust controller for Servo-Hydraulic Table [Volume 14, Issue 15, 2014, Pages 207-217]
  • Two Dimensional Turbulence Numerical study of the impact of the initial turbulent integral length scale on the dynamics of a two dimensional shear-free turbulent mixing layer [Volume 14, Issue 6, 2014, Pages 113-123]
  • Two dimensional weight function Mixed mode two dimensional weight functions for the subsurface elliptical cracks under normal loadings [Volume 14, Issue 10, 2014, Pages 50-58]
  • Two dimensional weight function Investigation of pressure gradient effect on stress intensity factor variations in autofrettaged cracked thick-walled tubes using two dimensional weight function method [Volume 14, Issue 8, 2014, Pages 137-145]
  • Two-fluid Flow Experimental Investigation of Slug Initiation Dependency to Upstream Conditions of Two Phases in Long Horizontal Channels in Two-Fluid Flow [Volume 14, Issue 3, 2014, Pages 27-35]
  • Two-fluid model Reduced order modeling of unsteady two-phase flows using proper orthogonal decomposition method [Volume 14, Issue 1, 2014, Pages 189-196]
  • Two-fluid model Extension of MUSCL-Hancock method for 2D five-equation two-fluid model for simulation of gas-liquid two-phase flow [Volume 14, Issue 11, 2014, Pages 144-150]
  • Two-fluid model Numerical Study of Subcooled Flow Boiling of Water-Al2O3 in Vertical Sinusoidal Wavy Channel [Volume 14, Issue 11, 2014, Pages 195-203]
  • Two-Layer Sheet Metal Numerical and experimental investigation of single point incremental forming of two layer sheet metals [Volume 14, Issue 14, 2014, Pages 1-8]
  • Two-Objective Optimization Two-objective Optimization of GEO Communication Satellite Trajectory Considering Impulsive Orbital Maneuver [Volume 14, Issue 5, 2014, Pages 121-128]
  • Two phase flow Investigation of two bubble coalescence with large density differences with Lattice Boltzmann Method [Volume 14, Issue 10, 2014, Pages 93-100]
  • Two phase flow Numerical Prediction of Vibration in Flexible Tube Bundles under Two Phase Cross Flow with HEM [Volume 14, Issue 15, 2014, Pages 155-169]
U
  • UCM model Analysis of Motion and Shape of Non-Newtonian Falling Drops in a Viscous Liquid [Volume 14, Issue 13, 2014, Pages 183-190]
  • Ultimate tensile strength Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6 [Volume 14, Issue 12, 2014, Pages 85-90]
  • Ultra Fine Grained Copper Investigation on Performance of Ultra Fine Grained Pure Copper as Electrode during Electrical Discharge Machining [Volume 14, Issue 1, 2014, Pages 97-105]
  • Ultra-Fine Tubes Study of effective parameters of Parallel Tubular Channel Angular Pressing(PTCAP) [Volume 14, Issue 16, 2014, Pages 27-33]
  • Ultrasonic Assisted Milling Modeling the cutting force in ultrasonic-vibration assisted milling and its empirical study [Volume 14, Issue 9, 2014, Pages 10-16]
  • Ultrasonic Oscillation Modeling of sliding friction with superimposed ultrasonic oscillation ‎ [Volume 14, Issue 16, 2014, Pages 302-310]
  • Ultrasonic testing Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm [Volume 14, Issue 15, 2014, Pages 241-248]
  • Ultrasonic Vibration Rotary vibration tool in Ultrasonic vibration-assisted turning process [Volume 14, Issue 1, 2014, Pages 51-58]
  • Ultrasonic Vibration Improve the formability in tube hydroforming process using ultrasonic vibrations [Volume 14, Issue 5, 2014, Pages 63-72]
  • Ultrasonic Vibration Experimental and Analytical Investigation of Thrust Force In Ultrasonic Assisted Drilling of Bone [Volume 14, Issue 6, 2014, Pages 194-200]
  • Ultrasonic Vibration Design and Manufacture of Vibratory Forming Tool to Develop “Ultrasonic Vibration assisted Incremental Sheet Metal Forming” Process [Volume 14, Issue 11, 2014, Pages 68-76]
  • Ultrasonic Vibration Investigation of Ultrasonic Assisted Incremental Sheet Metal Forming Process. [Volume 14, Issue 11, 2014, Pages 106-114]
  • Uncertainty Parameter estimation of the GMDH-type neural network using UKF filter [Volume 14, Issue 15, 2014, Pages 59-66]
  • Uncertainty Design and Implementation of a 2DOF Robust controller for Servo-Hydraulic Table [Volume 14, Issue 15, 2014, Pages 207-217]
  • Uncertainty Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm [Volume 14, Issue 15, 2014, Pages 241-248]
  • Under floor air distribution system Investigating the effect of return air vent height on energy consumption, thermal comfort, and air quality in under floor air distribution system [Volume 14, Issue 16, 2014, Pages 125-133]
  • Underwater vehicle Safe path planning and control an Unmanned Underwater Vehicle (UUV) using particle swarm optimization and fuzzy logic control method [Volume 14, Issue 14, 2014, Pages 199-210]
  • Undesired Slippage Adaptive Slippage Control in a One-Finger Hand Robot Manipulation [Volume 14, Issue 13, 2014, Pages 297-307]
  • Uniform shear loading Coupling of the fracture modes for the subsurface elliptical cracks under uniform shear loading [Volume 14, Issue 15, 2014, Pages 1-10]
  • Unknown Input Iterated Extended Kalman Filter (UIIEKF) Vehicle Longitudinal Velocity Estimation Using two New Estimators and without Measuring the Braking Torque [Volume 14, Issue 5, 2014, Pages 183-193]
  • Unknown input observer Residual Generation in Linear Systems with Unmatched Uncertainties for Fault Detection Problems [Volume 14, Issue 7, 2014, Pages 191-198]
  • Unmanned Aerial Vehicle Navigation Error Effect in the Terrain Following Based Constraint Optimal Trajectory Design for UAVs [Volume 14, Issue 12, 2014, Pages 145-155]
  • Unscented Kalman Filter Parameter estimation of the GMDH-type neural network using UKF filter [Volume 14, Issue 15, 2014, Pages 59-66]
  • Unsteady State Experimental study of the effect of inlet flow parameters on the operation of PEMFC [Volume 14, Issue 5, 2014, Pages 33-43]
  • Upper bound analysis Upper bound analyses of novel backward extrusion [Volume 14, Issue 15, 2014, Pages 369-376]
V
  • Variable Geometry Ejector Simulation and parameter study of small scale variable geometry ejector using CFD [Volume 14, Issue 5, 2014, Pages 129-136]
  • Variable properties Effects of magnetic field on mixed convection heat transfer and entropy generation of Cu-water nanofluid in a trapezoidal enclosure [Volume 14, Issue 9, 2014, Pages 183-194]
  • VAWT Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
  • Vegetable-Base Oil Evaluation of workpiece hardness and cutting parameters effects on cutting force and surface roughness in drilling using vegetable-based cutting fluid [Volume 14, Issue 13, 2014, Pages 265-271]
  • Vehicle control software Design and Implementation of a Model-in-the-Loop Simulator for Verification of the Vehicle Control Software in a Series Hybrid Electric Bus [Volume 14, Issue 12, 2014, Pages 13-22]
  • Vehicle Control Unit Design of a Real-time Simulator of the Engine-Generator for a Series Hybrid Electric Bus [Volume 14, Issue 4, 2014, Pages 200-206]
  • Vertical axis wind turbine Effects of Blade Mount Point and Preset Pitch on Performance of Vertical Axis Wind Turbines [Volume 14, Issue 2, 2014, Pages 79-84]
  • Vertical channel Natural Convection Heat Transfer of a Supercritical Fluid in a Vertical channel with isothermal condition [Volume 14, Issue 15, 2014, Pages 33-41]
  • Vertical duct Single Phase and Two Phase Analysis of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct under an Asymmetric Thermal Boundary Condition [Volume 14, Issue 13, 2014, Pages 47-58]
  • VGB code Proposition of obliqueable ring installation at crown of the hellertype cooling tower for reduction of throttling effect in windy condition [Volume 14, Issue 3, 2014, Pages 185-193]
  • Vibration Vibrational Study of laminated composite plates reinforced by carbon nanotubes [Volume 14, Issue 3, 2014, Pages 7-16]
  • Vibration Free vibration and Low velocity impact Analysis of sandwich plates with Smart Flexible cores [Volume 14, Issue 13, 2014, Pages 191-200]
  • Vibration Control Vibration Control of a Flexible Structure by Reconstruction of Control Input Based on Estimation of Undesired Vibration Frequencies [Volume 14, Issue 1, 2014, Pages 197-202]
  • Vibration Control Vibration control of gear-bearing dynamic system [Volume 14, Issue 6, 2014, Pages 135-143]
  • Vibration frequency identification Dynamics modeling and active vibration control of a satellite with flexible solar panels [Volume 14, Issue 16, 2014, Pages 57-66]
  • Vibration properties The effect of mesoporous silica and carbon nanotube on the vibration properties of polypropylene [Volume 14, Issue 1, 2014, Pages 67-73]
  • Vibrations Investigating Energy Harvesting from Unimorph Trapezoidal Beam Vibrations Using Distributed Parameters Method [Volume 14, Issue 15, 2014, Pages 96-102]
  • Vibration Simulation Simulation and Experimental Evaluation of a Magneto-Rheological Hydraulic Engine Mount [Volume 14, Issue 10, 2014, Pages 43-49]
  • Viscoelastic material Multiple Scattering of an Acoustic Wave from Fibers Encased in a Solid Viscoelastic Medium [Volume 14, Issue 15, 2014, Pages 423-430]
  • VOF method Three Dimensional Simulation of Two-Phase Slug Flow Regime In a Horizontal Channel Using VOF Method [Volume 14, Issue 7, 2014, Pages 176-182]
  • VOF method Numerical Simulation and Investigation of Bubble Velocity and Deformation in Inclined Channel with Two Consecutive Slopes Using VOF-PLIC Method [Volume 14, Issue 11, 2014, Pages 29-36]
  • Vortex Investigation the effect of hot rolling process on properties and microstructure of Al-B4C composite by vortex [Volume 14, Issue 9, 2014, Pages 140-146]
  • Vortex attractor Numerical and Experimental Analysis of a Suction Cup Vortex Attractor Used in Wall Climbing Robots [Volume 14, Issue 9, 2014, Pages 195-202]
  • Vortex rope Numerical Investigation of the Effect of Locating Groove on the Runner Cone of a Pump-Turbine on the Vortex Flow in the Draft Tube [Volume 14, Issue 15, 2014, Pages 352-360]
  • Vorticity contours Study the Effects of Oscillation Frequency and Amplitude on Flow Around a Flapping Airfoil via an Improved Immersed Boundary Method [Volume 14, Issue 16, 2014, Pages 291-301]
W
  • Waffle cylindrical shell Stability analysis of weight optimum waffle cylindrical shells -A new approach [Volume 14, Issue 14, 2014, Pages 177-184]
  • Wall climbing robot Numerical and Experimental Analysis of a Suction Cup Vortex Attractor Used in Wall Climbing Robots [Volume 14, Issue 9, 2014, Pages 195-202]
  • Wang-Nefske gas dynamic model Modeling burn due to airbags deployment to evaluate the role of various parameters in producing burns [Volume 14, Issue 8, 2014, Pages 83-94]
  • Ward-type tornado vortex chamber Numerical Investigation on Damage Patterns of Low Swirl Translating Tornadoes [Volume 14, Issue 6, 2014, Pages 81-90]
  • Warm tube hydroforming Prediction of Bursting in Warm Tub Hydroforming using Modified Ductile Fracture Criteria [Volume 14, Issue 16, 2014, Pages 201-211]
  • Warping Function Static analysis of composite box beams by dimensional reduction method [Volume 14, Issue 16, 2014, Pages 367-374]
  • Water Experimental study of the effect of inlet flow parameters on the operation of PEMFC [Volume 14, Issue 5, 2014, Pages 33-43]
  • Water Coverage Length Ratio Experimental study of the effect of inlet flow parameters on the operation of PEMFC [Volume 14, Issue 5, 2014, Pages 33-43]
  • Water tunnel Design and fabrication of a force-moment measurement system for testing of the models in a water tunnel [Volume 14, Issue 14, 2014, Pages 291-298]
  • Wave directional Spectrum Estimation of Transfer Functions for Wave Measurement Buoy using Field Data [Volume 14, Issue 8, 2014, Pages 131-136]
  • Wavelet Identification of broken needle in single jersey circular knitting machine using neural network on yarn fluctuations signals [Volume 14, Issue 16, 2014, Pages 339-348]
  • Wavelet transform Classification of damage mechanisms during delamination growth in sandwich composites by acoustic emission [Volume 14, Issue 6, 2014, Pages 144-152]
  • Wave measurement buoys Estimation of Transfer Functions for Wave Measurement Buoy using Field Data [Volume 14, Issue 8, 2014, Pages 131-136]
  • Wave Velocity Improvement of Ultrasonic Wave Velocity Measurements in Steel Components by Using the SAGE Algorithm [Volume 14, Issue 15, 2014, Pages 241-248]
  • Wavy channel A New Geometrical Modeling Approach in the Analysis and Optimization of Convection Heat Transfer in Wavy Channels [Volume 14, Issue 9, 2014, Pages 147-156]
  • Web warping Investigation of Web Warping of Profiles with Changing Cross Section in Flexible Roll Forming Process [Volume 14, Issue 6, 2014, Pages 72-80]
  • Weft knitted fabric Non-linear behavior Simulation of the drying of weft knitted fabric by using mass- spring-damper model and straight forward expansion [Volume 14, Issue 1, 2014, Pages 123-130]
  • Weight Pareto discrete- continuous optimization of Sikorsky ASH-3D helicopter main gearbox [Volume 14, Issue 16, 2014, Pages 170-180]
  • Weight function method Stress intensity factor for a longitudinal semi-elliptical crack in a thick-walled cylinder under hyperbolic thermal loading [Volume 14, Issue 16, 2014, Pages 143-151]
  • Welding Numerical and experimental study of temperature and residual stress in multi-pass welding of two stainless steel plates having different thicknesses [Volume 14, Issue 9, 2014, Pages 81-89]
  • Wells Turbine Parametric Study of Ocean Wave Turbine (Wells Type) over the Floating Oscillating Platform: A Numerical Analysis [Volume 14, Issue 13, 2014, Pages 77-85]
  • Wheeled Mobile Manipulator Stability A Comparison of Two Online Tip-over Prevention Algorithms for Wheeled Mobile Manipulators [Volume 14, Issue 14, 2014, Pages 271-281]
  • Wheeled mobile robot Design and Implementation of a Fuzzy Sliding Mode Control Law for a Wheeled Robot Towing a Trailer [Volume 14, Issue 4, 2014, Pages 91-98]
  • Wheeled mobile robot Trajectory tracking control of a wheeled mobile robot by a non-model-based control algorithm using PD-action filtered errors [Volume 14, Issue 12, 2014, Pages 171-178]
  • Wheel Profile Railway vehicle derailment in curve due to wear [Volume 14, Issue 8, 2014, Pages 199-208]
  • White Noise Excitation Analytic Bifurcation Investigation of Cylindrical Shallow Shells under ‎Lateral Stochastic Excitation [Volume 14, Issue 7, 2014, Pages 77-84]
  • Wilson element Shape optimization of free form shells under stress constraint [Volume 14, Issue 16, 2014, Pages 190-200]
  • Wind tunnel Longitudinal Dynamic Derivatives of an Airfoil under Pitching and Plunging Oscillations in Wind Tunnel [Volume 14, Issue 10, 2014, Pages 159-166]
  • Wind turbine 3D Analysis of the Boundary Layer on Wind Turbine Blades [Volume 14, Issue 3, 2014, Pages 119-128]
  • Winkler foundation Buckling and vibration of symmetrically-laminated composite elliptical plates resting on Winkler-type foundation subjected to initial in-plane stresses [Volume 14, Issue 1, 2014, Pages 19-26]
  • Wire Driver Simulation and construction of a 2-DOF wire driven robotic arm with 3-D workspace [Volume 14, Issue 2, 2014, Pages 34-40]
  • Woodlouse shell Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical simulation [Volume 14, Issue 7, 2014, Pages 183-190]
  • Workpiece Hardness Evaluation of workpiece hardness and cutting parameters effects on cutting force and surface roughness in drilling using vegetable-based cutting fluid [Volume 14, Issue 13, 2014, Pages 265-271]
X
  • X-Ray Diffraction Method Investigation of Residual Stresses in Stress-Relieved Samples by Heat Treatment and Ultrasonic Methods Using Hole-Drilling Method [Volume 14, Issue 15, 2014, Pages 273-278]
  • X-ray diffraction (XRD) Qualitative Evaluation of Mechanical Properties of TiAlN Nanostructured Coatings Deposited on Cutting Tools by Analysis of XRD Results [Volume 14, Issue 12, 2014, Pages 61-66]
Y
  • Yield criterion The effects of Hosford, Hill’s quadratic and non-quadratic yield criteria on prediction of forming limit diagrams based on M-K Model [Volume 14, Issue 5, 2014, Pages 137-146]
Z
  • Zeotropic mixture fluid Energy and exergy analysis of Organic Rankine Cycle with using two-component working fluid in specified heat source conditions [Volume 14, Issue 3, 2014, Pages 145-156]