Modares Mechanical Engineering

S

• Safe landing Gliding parachute platform design optimization with performance & stability Constraints [Volume 17, Issue 4, 2017, Pages 209-216]
• Safe working zone Experimental and Numerical Study on Effects of Process Parameters on Working Zone in Hydro-mechanical Deep Drawing of Two-layer Conical Parts [Volume 17, Issue 3, 2017, Pages 72-78]
• Sandwich composite beam Experimental and Numerical Analysis of Sandwich Composite Beams under Four-Point Bending [Volume 17, Issue 1, 2017, Pages 241-252]
• Satellite Modeling and System Identification of a reaction wheel with experimental data [Volume 17, Issue 11, 2017, Pages 437-446]
• Satellite conceptual design Fast determination of system specifications of GEO communication satellites. [Volume 17, Issue 2, 2017, Pages 404-412]
• Satellite Constellation Modeling of large scale relative motion of two satellite in elliptical orbit [Volume 17, Issue 2, 2017, Pages 187-198]
• Satellite Constellation A New Approaches for Satellite Constellation Design to Regional Coverage Using GDOP [Volume 17, Issue 5, 2017, Pages 193-200]
• Scanning algorithm Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2017, Pages 157-166]
• Scan vector length Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2017, Pages 157-166]
• SDM Method Fast determination of system specifications of GEO communication satellites. [Volume 17, Issue 2, 2017, Pages 404-412]
• Selective laser melting process Finite element simulation of selective laser melting process for fabrication of a sample part under various support conditions [Volume 17, Issue 4, 2017, Pages 143-153]
• Selective laser sintering Determination of optimal parameters in selective laser sintering for minimizing the part warping based on Taguchi method [Volume 17, Issue 12, 2017, Pages 157-166]
• Self-healing Micro-vascular channel based self-healing fibrous composites under transverse loading [Volume 17, Issue 5, 2017, Pages 63-68]
• Self-healing Optimizing the self- healing behavior of hollow glass fibers reinforced epoxy matrix composite [Volume 17, Issue 8, 2017, Pages 182-190]
• Self-Healing phenomenon An experimental investigation on the tensile behavior of epoxy/carbon fibers composites containing anhydride self-healing material [Volume 17, Issue 3, 2017, Pages 336-342]
• SEM Experiment investigation of plane stress fracture toughness for aluminum sheets produced by Cold Roll Bonding Process [Volume 17, Issue 2, 2017, Pages 101-108]
• SEM Experimental investigation of formability of aluminum sheets produced by cold roll bonding process used by Nakazima test [Volume 17, Issue 3, 2017, Pages 451-454]
• SEM Experimental investigation of plane stress fracture toughness for Al/Cu/Al multilayer produced by Cold Roll Bonding method [Volume 17, Issue 5, 2017, Pages 166-174]
• Semi-analytical methods Vortex Induced Vibration of Simply Supported Visco elastic Beam [Volume 17, Issue 9, 2017, Pages 309-318]
• Semi-empirical Accuracy Evaluation of Semi-empirical and Numerical Methods in Estimation of Aerodynamic Coefficients for air-launch-to-orbit delta wing [Volume 17, Issue 9, 2017, Pages 237-244]
• Semi-Empirical models Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
• Sensitivity Analysis Static and dynamic tolerance analysis of flexible rotary systems based on the tolerance zone method [Volume 17, Issue 8, 2017, Pages 143-152]
• Sensitivity Analysis Uncertainty quantification of electroosmotic flow in a microchannel [Volume 17, Issue 8, 2017, Pages 291-300]
• Sensitivity Analysis Sensitivity analysis of 3D manipulation of spherical nanoparticles by using E-fast method [Volume 17, Issue 11, 2017, Pages 59-69]
• Separation Investigation of optimized body tilt angle and acoustic excitation affecting performance of hydro cyclone particles separator based on genetic algorithm [Volume 17, Issue 3, 2017, Pages 37-46]
• Separation Optimization of geometric parameters and excitation frequency of a synthetic jet to avoid separation on the airfoil _ [Volume 17, Issue 12, 2017, Pages 65-76]
• Series Elastic Actuator Identification and Torque Control of Series Elastic Actuator of Lower Limb Extremity Exoskeleton [Volume 17, Issue 8, 2017, Pages 1-8]
• Serret-Andoyer Transformation Analytical and Numerical Analysis of Chaos in Attitude Dynamics of a Satellite in an Elliptic Orbit [Volume 17, Issue 7, 2017, Pages 236-244]
• Severe plastic deformation Simulation and experimental study of severe plastic deformation of 7075 Al alloy processed by repetitive upsetting-extrusion [Volume 17, Issue 8, 2017, Pages 323-332]
• Severe plastic deformation Effects of PTCAP as a severe plastic deformation method on the mechanical and microstructural properties of AZ31 magnesium alloy [Volume 17, Issue 12, 2017, Pages 409-416]
• Sever Plastic Deformation (SPD) The Investigation of mechanical and metallurgical properties of multi-layered Al/Cu composite produced by Accumulative Press Bonding (APB) process [Volume 17, Issue 2, 2017, Pages 109-114]
• Sewer network Numerical Modelling of Flood Waves Propagation in Sewer Networks using one- and Two-Dimensional Modified HLLC Method [Volume 17, Issue 7, 2017, Pages 273-282]
• Shallow flow Study on turbulent flow in a compound channel with shallow overbank using Particle Image Velocimetry [Volume 17, Issue 8, 2017, Pages 164-172]
• Shallow Water Equations Numerical Modelling of Water Entrance into a Wet Tank Using a Modified Wave Propagation Algorithm [Volume 17, Issue 4, 2017, Pages 168-176]
• Shallow Water Equations A Weakly Coupled Scheme for Modelling Bedload Sediment Transport Using an Augmented Riemann Solver [Volume 17, Issue 9, 2017, Pages 409-416]
• Shallow Water Equations Numerical Modelling of Flood Waves Propagation in Sewer Networks using one- and Two-Dimensional Modified HLLC Method [Volume 17, Issue 7, 2017, Pages 273-282]
• Shan-Chen A new method to reach high-density ratios and low viscosities based on the Shan-Chen multiphase model in lattice Boltzmann method [Volume 17, Issue 9, 2017, Pages 145-152]
• Shape Memory alloy Dynamic analysis of a shape memory alloy beam [Volume 17, Issue 12, 2017, Pages 223-233]
• Shape Memory alloy Torsional modeling and experimental characterization of a shape memory alloy rod, using Brinson’s asymmetric model [Volume 17, Issue 12, 2017, Pages 469-477]
• Shape memory alloys Design and modeling of artificial arm muscle using shape memory alloys [Volume 17, Issue 10, 2017, Pages 29-38]
• Shape memory alloy (SMA) Conceptual design and modeling of an adaptable robotic mechanism actuated by shape memory alloy for inspection of low diameter pipes [Volume 17, Issue 1, 2017, Pages 394-402]
• Shape memory alloy wire Influence of pre strain shape memory alloy wire on impact properties of smart fibers metal composite [Volume 17, Issue 4, 2017, Pages 322-330]
• Shape memory alloy wire Influence of pre-strain and position of shape memory alloy wire on buckling properties of smart fibers metal composite [Volume 17, Issue 11, 2017, Pages 429-436]
• Shape memory polymer A finite element analysis for shape memory polymer Timoshenko beams [Volume 17, Issue 8, 2017, Pages 351-359]
• Shear and Normal Deformation Theory Buckling Analysis of intelligent Nanoplate under Inplane Loading Based on Nonlocal Elasticity and Shear and normal Deformation Theories [Volume 17, Issue 2, 2017, Pages 427-438]
• Shear fracture Study of macroscopic fracture surface characteristics of spiral welded API X65 gas transportation pipeline steel [Volume 17, Issue 11, 2017, Pages 219-228]
• Shear stress Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
• Shear-tensile test Microstructure and mechanical properties of aluminum to aluminum clad steel lap joint using gas tungsten arc welding process [Volume 17, Issue 12, 2017, Pages 328-336]
• Shear Thickening Fluids Numerical simulation of shear thickening fluid impregnated polypropylene fabric and comparing with experimental results [Volume 17, Issue 2, 2017, Pages 221-230]
• Sheet formability Experimental Determination and Numerical Prediction of Necking and Fracture Forming Limit Curves of 2024 Aluminum Alloy Sheet Using Damage Criterion [Volume 17, Issue 9, 2017, Pages 361-371]
• Shell Buckling of FGM thick-walled cylindrical shell supported with third order shear theory under uniform Axial and lateral loads [Volume 17, Issue 7, 2017, Pages 373-385]
• Shell and tube heat exchanger Numerical investigation of reciprocating flow in a shell and tube heat exchanger used as a cooler in gamma Stirling engine [Volume 17, Issue 10, 2017, Pages 359-366]
• Ship Energy, Exergy and Environmental Analysis of Using Hybrid Compression-Absorption Refrigeration System on a Merchant Ship [Volume 17, Issue 10, 2017, Pages 429-438]
• Shock-Absorber Investigation of Gas Compression Process inside Oleo-Pneumatic Shock-Absorber with Two-Phase Flow Simulation Method [Volume 17, Issue 8, 2017, Pages 133-142]
• Shock Bubble Flow Simulation of compressible multimaterial flow by 2D hydrodynamic code [Volume 17, Issue 2, 2017, Pages 211-220]
• Shock-capturing schemes Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
• Shock sensor Simulation of shock-containing flows using a compact finite difference scheme and a weighed essentially non-oscillatory filter [Volume 17, Issue 5, 2017, Pages 201-210]
• Shock Tube Experimental Study of the Noise Sources from a Hot Supersonic Jet Impinging on a Flat Plate at Initial Stages of Jet Formation [Volume 17, Issue 2, 2017, Pages 359-368]
• Short shot An experimental and simulation study of flow balance in multi-cavity plastic injection molds [Volume 17, Issue 4, 2017, Pages 285-289]
• Shrinkage Investigation and simulation of geometric and optical quality for bi-convex lens produced by injection molding process [Volume 17, Issue 12, 2017, Pages 21-32]
• SiC Improvement of wearing property of Al/ (SiC+BNh) surface hybrid composite fabricated by friction stir processing [Volume 17, Issue 9, 2017, Pages 381-389]
• Signal Based Fault propagation analysis for an induction motor- centrifugal pump system [Volume 17, Issue 12, 2017, Pages 485-494]
• Signal-based fault detection Comparison of wavelet packet based Hilbert transform and improved Hilbert-Huang transform in fault detection of broken rotor bar [Volume 17, Issue 5, 2017, Pages 95-102]
• Signal processing Comparison between empirical mode decomposition and wavelet transform for unbalance detection on rotating machinery using optimized support vector machine [Volume 17, Issue 2, 2017, Pages 325-332]
• Silica Nanoparticle Micromechanical analysis of the effects of adding silica nanoparticles on the elastoplastic behavior of polymeric nanocomposites considering interphase [Volume 17, Issue 9, 2017, Pages 319-326]
• Silicon Structures Development of Coarse-Graining Methods for Modeling of Silicon Nanostructures [Volume 17, Issue 4, 2017, Pages 267-276]
• Similarity Solution A Similarity Solution of the MHD Fluid over a Stretching Sheet: A Qualitative Investigation of the Surface with Constant Suction in Cooling Process [Volume 17, Issue 4, 2017, Pages 341-348]
• Similarity Solution Effects of suction/injection on flow and heat transfer over a permeable surface in presence of different nanofluids [Volume 17, Issue 9, 2017, Pages 439-449]
• Simplified dynamic model Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
• Simulators Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
• Single and multi-cell sections Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2017, Pages 229-238]
• Single chamber Performance analysis of coplanar single chamber solid oxide fuel cell with oxygen-methane-nitrogen mixture under steady state conditions [Volume 17, Issue 1, 2017, Pages 31-38]
• Single crystal superalloy Discrete dislocation plasticity investigation of creep deformation in nickel-based single crystal superalloys [Volume 17, Issue 7, 2017, Pages 171-179]
• Single flexible-link Design and Practical Implementation of a Fractional Order PID Controller for a Single Flexible-Link Robot [Volume 17, Issue 10, 2017, Pages 411-419]
• Single-Phased Lagging model Numerical simulation of the non-Fourier heat conduction of the single-phased ‎and dual-phased lagging in sand: local thermal equilibrium [Volume 17, Issue 3, 2017, Pages 446-450]
• Single support phase Walking Path Prevision of Biped Robot along with Stability and Optimization of Power Consumption in a Single Support Phase [Volume 17, Issue 11, 2017, Pages 1-11]
• Singular Source Terms Using the Method of Inverse Problems in Implementing the Solid Immersed Boundaries on Vorticity-Streamfunction Formulation of the Incompressible Viscous Fluid Flow [Volume 17, Issue 10, 2017, Pages 397-404]
• Sinusoidal Temperature Distribution Effect of magnetic field on natural convection heat transfer of nanofluid in wavy cavity with non-uniform temperature distribution [Volume 17, Issue 4, 2017, Pages 29-40]
• Six-axis force/torque Proposing an index for qualitative comparison of six-axis force/torque sensors and optimization of Maltese cross geometry to reduce cross-coupling error [Volume 17, Issue 10, 2017, Pages 153-164]
• Size effect A study of fluid media and size effect on dynamic response of microplate [Volume 17, Issue 9, 2017, Pages 153-164]
• Size effect Analysis of low velocity impact on nano-beam using modified couple stress theory [Volume 17, Issue 12, 2017, Pages 42-46]
• Skip spark Validation of a Polytropic-Base Blowby Model using Experimental Data of Gasoline Fuelled Motoring Cycles [Volume 17, Issue 10, 2017, Pages 205-212]
• Slab Analysis Slab analysis of front and back tensions effects on decreasing force and pressure in asymmetrical rolling process of unbonded clad sheet [Volume 17, Issue 7, 2017, Pages 431-440]
• Slab method Investigation of tube drawing with fixed plug process parameters through presenting a modified slab analysis with finite element verification [Volume 17, Issue 1, 2017, Pages 203-209]
• Sliding Mesh Numerical Modeling of High-Speed Tunneled Hull Turning Circle Maneuver for Investigating the Speed and Rudder Angle Effects on Maneuver Parameters [Volume 17, Issue 2, 2017, Pages 85-92]
• Sliding mode Fractional Order Backstepping Fast Terminal Sliding Mode Control for Micro-Electro-Mechanical triaxial gyroscope [Volume 17, Issue 5, 2017, Pages 385-393]
• Sliding mode Dynamic Modeling and Optimal Adaptive Robust Control of an Omni Directional Mobile Robot Using Harmony Search Algorithm [Volume 17, Issue 8, 2017, Pages 191-200]
• Sliding mode Attitude Control of a Quadrotor Using Implementation of Modified PID and Sliding Mode Controllers [Volume 17, Issue 10, 2017, Pages 223-232]
• Sliding mode control Design of quantum intelligent robust controller via time variant break frequency bandwidth sliding surface [Volume 17, Issue 1, 2017, Pages 305-310]
• Sliding mode control Single-rod electro-hydraulic servo system control with sliding mode controller improved by parallel fuzzy compensators [Volume 17, Issue 2, 2017, Pages 377-384]
• Sliding mode control Fractional order sliding mode controller design for quadrotor system [Volume 17, Issue 5, 2017, Pages 287-294]
• Sliding mode control Modeling and position controller design of a servo-hydraulic actuator under variable loads using sliding mode control [Volume 17, Issue 6, 2017, Pages 295-302]
• Sliding mode controller Robust control of anti-lock braking system using optimized fast terminal sliding mode controller [Volume 17, Issue 4, 2017, Pages 290-298]
• Sliding mode controller Optimal Control of Satellite Proximity Hovering around Elliptical Disturbed Orbit Using Particle Swarm Optimization [Volume 17, Issue 11, 2017, Pages 172-180]
• Sliding mode controller Collision-Free Navigation and Control for Autonomous Vehicle in Complex Urban Environments [Volume 17, Issue 11, 2017, Pages 277-288]
• Sliding-mode controller Improving transparency in bilateral teleoperation systems based on model-mediated approach [Volume 17, Issue 1, 2017, Pages 273-283]
• Sliding mode control theorem Adaptive fractional order Backstepping sliding mode controller design for a magnetic levitation system [Volume 17, Issue 3, 2017, Pages 187-195]
• Sliding mode method Trajectory and control design of a quadcopter for crossing obstacles using sliding mode method [Volume 17, Issue 6, 2017, Pages 351-356]
• Slip length Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
• Slug Numerical modeling of air bubbles entrainment in liquid slug body at Horizaontal duct [Volume 17, Issue 4, 2017, Pages 177-187]
• Slug Evaluation of the slug two-phase flow parameters in a horizontal two-dimensional duct [Volume 17, Issue 4, 2017, Pages 349-358]
• Small scale effect A New Method for Bending Analysis of Nano Beam and Rectangular Nano Plate: Full Modified Nonlocal Theory [Volume 17, Issue 3, 2017, Pages 376-384]
• Smart fiber metal laminate composite Influence of pre-strain and position of shape memory alloy wire on buckling properties of smart fibers metal composite [Volume 17, Issue 11, 2017, Pages 429-436]
• Smart fibers metal composite Influence of pre strain shape memory alloy wire on impact properties of smart fibers metal composite [Volume 17, Issue 4, 2017, Pages 322-330]
• Smear stiffness method Analysis of linear vibrational behavior of anisogrid lattice composite conical shells formed by helical ribs [Volume 17, Issue 3, 2017, Pages 251-262]
• Smoothed Particle Hydrodynamics Investigation of convection-diffusion process in a two-phase air-water flow using Smoothed Particle Hydrodynamics [Volume 17, Issue 2, 2017, Pages 115-125]
• Smoothed-Particle Hydrodynamics Experimental Investigation and Numerical Simulation of Fluid-Structure Interaction on Hydroforming Process of Triangular Plates Under Impact Loading [Volume 17, Issue 12, 2017, Pages 114-122]
• Sobol sensitivity analysis Multi objective optimization and statistic sensitivity analysis of solid oxide fuel cell-gas turbine hybrid system fed by biogas in urban wastewater treatment plants [Volume 17, Issue 3, 2017, Pages 239-250]
• Sodium-based absorber Simulating the effects of different absorbers for reduction reducing of SO2 from flue gases of in industrial boilers [Volume 17, Issue 3, 2017, Pages 425-436]
• Soft Landing Optimal trajectory design for soft landing on the Moon by using differential flatness [Volume 17, Issue 10, 2017, Pages 9-19]
• Soft Robotics Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
• Soft Sensor Developing a novel soft magnetic force sensor based on Hall Effect [Volume 17, Issue 6, 2017, Pages 444-450]
• Software framework A framework for developing an FPGA based coprocessor for accelerating numerical computations [Volume 17, Issue 10, 2017, Pages 58-64]
• Solar Collector Experimental study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 17, Issue 11, 2017, Pages 118-124]
• Solar distillation Experimental Study of Solar Distillation using PCM and Flow Turbulators [Volume 17, Issue 6, 2017, Pages 117-127]
• Solar Energy Fabrication and Thermal Modeling of Unglazed Transpired Solar Air Heater Collectors with metallic (Steel) and non-metallic absorber plates [Volume 17, Issue 9, 2017, Pages 339-350]
• Solar Energy Optimization and advanced exergy evaluation of a Clausius-Rankine cycle to be used in solar power systems [Volume 17, Issue 7, 2017, Pages 333-342]
• Solar panel Extraction of optimum design process for satellite solar panel based on reliability and solutions to improve it [Volume 17, Issue 8, 2017, Pages 241-251]
• Solidification Effect of initial impact velocity on dynamics and shape of formed splats of hollow droplets in thermal plasma spraying [Volume 17, Issue 2, 2017, Pages 295-305]
• Solidification Numerical comparison between the impact of a completely molten and a semi-molten hollow droplet on a surface [Volume 17, Issue 8, 2017, Pages 267-278]
• Solid oxide fuel cell Performance analysis of coplanar single chamber solid oxide fuel cell with oxygen-methane-nitrogen mixture under steady state conditions [Volume 17, Issue 1, 2017, Pages 31-38]
• Solid oxide fuel cell Multi objective optimization and statistic sensitivity analysis of solid oxide fuel cell-gas turbine hybrid system fed by biogas in urban wastewater treatment plants [Volume 17, Issue 3, 2017, Pages 239-250]
• Solid oxide fuel cell Thermo-economic analysis with reliability consideration of a hybrid system of Gas Turbine, SOFC and Multiple Effect Desalination [Volume 17, Issue 10, 2017, Pages 321-332]
• Sound pressure level Comparison of different methods of numerical simulation of flow and sound fields around a square cylinder at various incidence angles [Volume 17, Issue 5, 2017, Pages 147-158]
• Sound source Investigation of optimized body tilt angle and acoustic excitation affecting performance of hydro cyclone particles separator based on genetic algorithm [Volume 17, Issue 3, 2017, Pages 37-46]
• Sound transmission loss Sound transmission loss through triple-walled sandwich cylindrical shells in the presence of external flow [Volume 17, Issue 10, 2017, Pages 439-450]
• SOx Numerical simulation the effect of existing sulfur in the concentrate particles on flame temperature and pollutants in the flash furnace copper smelting [Volume 17, Issue 7, 2017, Pages 101-108]
• Space Explorations Deriving equations of motion of a wheeled mobile robot and its control using extended multiple impedance strategy [Volume 17, Issue 5, 2017, Pages 394-404]
• SPD Study of Microstructure and mechanical properties of pure commercial titanium via combination of Equal channel angular pressing and Extrusion [Volume 17, Issue 1, 2017, Pages 453-461]
• SPD Experimental investigation of the effect of temperature in extrusion process of ECAPed nanostructured Titanium [Volume 17, Issue 4, 2017, Pages 52-60]
• Specific Area Numerical Investigation of non-homogeneity and specific area in porous media on packed bed reactor performance by Lattice Boltzmann Method [Volume 17, Issue 12, 2017, Pages 446-456]
• Specific cutting energy An Experimental study into the size effect in micromilling process [Volume 17, Issue 10, 2017, Pages 242-248]
• Spectral method Charge-Discharge Cycle Simulation of Lead-Acid Cell Using Chebyshev Spectral Method [Volume 17, Issue 10, 2017, Pages 213-222]
• Spectral methods A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation [Volume 17, Issue 1, 2017, Pages 47-55]
• Sphere Numerical study of three dimensional instability of nonlinear viscoelastic fluid flow around a sphere [Volume 17, Issue 12, 2017, Pages 213-222]
• Spherical nanoparticles Sensitivity analysis of 3D manipulation of spherical nanoparticles by using E-fast method [Volume 17, Issue 11, 2017, Pages 59-69]
• Spherical Particle The Influence of Random Vortices on the Heat Transfer Rate from a Spherical Particle [Volume 17, Issue 3, 2017, Pages 93-104]
• Spike Design of Spike Nozzle and Comparison of Turbulence Models in Numerical Simulation of its Flow-field in Design and Off-design Conditions [Volume 17, Issue 6, 2017, Pages 190-200]
• Spindle Forces Vibro-acoustic analysis of tire and rim finite element model coupled with fluid acoustic cavity [Volume 17, Issue 4, 2017, Pages 381-392]
• Spin Maneuver Nonlinear Estimation of Flight Mode characteristics in Spin Maneuver by using Empirical Mode Decomposition Algorithm and Hilbert Transform [Volume 17, Issue 1, 2017, Pages 322-332]
• Spiral Bevel Gears Thermal analysis, effect of lubricant and fatigue life of spiral bevel gears of main gearbox [Volume 17, Issue 8, 2017, Pages 38-48]
• Spiral seam weld Study of macroscopic fracture surface characteristics of spiral welded API X65 gas transportation pipeline steel [Volume 17, Issue 11, 2017, Pages 219-228]
• Spontaneous curvature Investigation of spontaneous curvature and membrane initial configuration on shape evolution of two-component vesicle [Volume 17, Issue 4, 2017, Pages 9-16]
• Spray The Effect of Injector Angle and Start of Injection on Spray-Wall Interaction in Gasoline Direct Injection Engine [Volume 17, Issue 1, 2017, Pages 95-105]
• Spray and Combustion Simulation Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
• Spring Back Numerical and experimental investigation on flower pattern design methods in cold roll forming process of a high strength steel pipe [Volume 17, Issue 10, 2017, Pages 259-270]
• Square cylinder Comparison of different methods of numerical simulation of flow and sound fields around a square cylinder at various incidence angles [Volume 17, Issue 5, 2017, Pages 147-158]
• Square cylinder Experimental Investigation of aero acoustic noise generation process from a wall mounted square cylinder at incidence [Volume 17, Issue 9, 2017, Pages 327-338]
• Squeeze film A study of fluid media and size effect on dynamic response of microplate [Volume 17, Issue 9, 2017, Pages 153-164]
• Stability Stability and bifurcation analysis of a beam-mass-spring-damper system under primary and one-to-three internal resonances [Volume 17, Issue 2, 2017, Pages 166-176]
• Stability Investigating the nonlinear behavior and stability analysis of the automatic ball balancer by the multiple scales method [Volume 17, Issue 4, 2017, Pages 188-198]
• Stability Gliding parachute platform design optimization with performance & stability Constraints [Volume 17, Issue 4, 2017, Pages 209-216]
• Stability Numerical Investigation of Lateral jet interaction effects on aerodynamic behavior of a supersonic projectile [Volume 17, Issue 4, 2017, Pages 431-442]
• Stability Simulation and impedance control of the grasping of a spherical object with soft contact surfaces [Volume 17, Issue 7, 2017, Pages 9-19]
• Stability A novel Lyapunov function for stability of haptic device in simulating virtual objects [Volume 17, Issue 10, 2017, Pages 367-374]
• Stability Model-Free Adaptive Controller Design for Nonlinear system of an Air Vehicle pitch channel [Volume 17, Issue 11, 2017, Pages 161-171]
• Stability Resonance analysis and free nonlinear vibrations of a nanocomposite with internal damping [Volume 17, Issue 12, 2017, Pages 98-104]
• Stability analysis Stability analysis and state feedback controller design for networked control systems with time varying delays [Volume 17, Issue 5, 2017, Pages 77-85]
• Stabilization Trajectory tracking and stabilization control of a wheeled robot using predictive algorithm [Volume 17, Issue 12, 2017, Pages 167-175]
• Stabilizing Design of Robust H_∞ Control for Stabilizing of Stratospheric Airship with Parametric Uncertainty and External Disturbance [Volume 17, Issue 3, 2017, Pages 216-226]
• Stall Flow Control via Co-Flow Jet over Clark-Y Airfoil [Volume 17, Issue 2, 2017, Pages 147-156]
• Stance leg Investigation of Dynamic Heel Height Effect of Shoe on Joints of Lower Body during Walking [Volume 17, Issue 4, 2017, Pages 399-409]
• Standard triangle language (STL) Build Time Estimation in Additive Manufacturing Processes based on Part Orientations [Volume 17, Issue 8, 2017, Pages 9-16]
• Stand-off distance Effect of stand-off distance and the explosive ratio parameters on the properties of explosively bonded copper-aluminum-copper [Volume 17, Issue 1, 2017, Pages 39-46]
• STAR-CD software Numerical Modelling of Water Entrance into a Wet Tank Using a Modified Wave Propagation Algorithm [Volume 17, Issue 4, 2017, Pages 168-176]
• State Estimation The hybrid unscented /H∞ Kalman filter in state estimation of nonlinear problems [Volume 17, Issue 4, 2017, Pages 315-321]
• State feedback controller Stability analysis and state feedback controller design for networked control systems with time varying delays [Volume 17, Issue 5, 2017, Pages 77-85]
• Static Deflection Study of Static Deflection and Instability Voltage of Phase Shifter Micro-Switches Using a Nonlinear Beam Model and Non-localized elasticity theory [Volume 17, Issue 10, 2017, Pages 93-100]
• Static toughness Effect of severe plastic deformation by equal channel angular pressing on fracture toughness of Al-7075 alloy [Volume 17, Issue 12, 2017, Pages 11-20]
• Statistical analyze Fast determination of system specifications of GEO communication satellites. [Volume 17, Issue 2, 2017, Pages 404-412]
• Steady Flow Test Rig Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
• Steady state Modeling of groundwater flow in unconfined aquifer in steady state with meshless local Petrov-Galerkin [Volume 17, Issue 2, 2017, Pages 393-403]
• Steam Turbine Effect of Blade Surface Roughness on Performance of a Low-Pressure Steam Turbine Stage [Volume 17, Issue 8, 2017, Pages 29-37]
• Step by Step method Optimization of Alpha Type Stirling Engine Phase Angle with Step-By-Step Simulation Method [Volume 17, Issue 10, 2017, Pages 341-349]
• Steric effects Ionic size effects on combined electrokinetic and pressure driven flow of Power-law fluids [Volume 17, Issue 11, 2017, Pages 77-88]
• Stewart robot Mass and inertia effect of the links on simplification of the 6-PUS robot dynamic equations for different payload ratio [Volume 17, Issue 6, 2017, Pages 108-116]
• Stiffened Composite Cylinder The effect of geometrical imperfection on the axial buckling of unstiffened and stiffened composite cylinders with and without cutout [Volume 17, Issue 7, 2017, Pages 245-256]
• Stiffened cylindrical shell Thermal post-buckling analysis of eccentrically stiffened FG cylindrical shells surrounded by elastic foundation and subjected to thermal radial loading [Volume 17, Issue 3, 2017, Pages 397-404]
• Stiffness Design and Analysis of a knee-ankle-foot orthosis using torsional spring [Volume 17, Issue 10, 2017, Pages 185-193]
• Stiffness coefficients Calculation of the equivalent torsional rigidity for single and multi-cell thin-walled sections made of laminated composites [Volume 17, Issue 11, 2017, Pages 229-238]
• Stillinger-Weber Potential Development of Coarse-Graining Methods for Modeling of Silicon Nanostructures [Volume 17, Issue 4, 2017, Pages 267-276]
• Stir casting Investigation of the microstructure and mechanical properties of cast AA7068 nanocomposite reinforced with graphene nano plates [Volume 17, Issue 10, 2017, Pages 139-144]
• Stirling engine A numerical investigation of Nusselt number and friction coefficient in an arc-type Stirling engine heater [Volume 17, Issue 4, 2017, Pages 85-91]
• Stirling engine Modeling of combined heating and power system driven by Stirling engine from the perspective of the fuel consumption and pollution emission [Volume 17, Issue 10, 2017, Pages 301-311]
• Stokes wave energy Hydrodynamics of restrained buoy with an approach to wave energy absorption enhancement [Volume 17, Issue 5, 2017, Pages 129-137]
• Stowell Model Theoretical Investigation of Internal Cavitation on the FLD of IF Steel Using M-K Model and Gurson Plastic Potential Function [Volume 17, Issue 11, 2017, Pages 353-360]
• STR adaptive controller The Novel Control Method for Voice Coil Actuator Fatigue Testing Machine [Volume 17, Issue 7, 2017, Pages 79-90]
• Strain gradient theory Nonlinear dynamic analysis of an atomic force microscope submerged in liquid based on strain gradient theory [Volume 17, Issue 12, 2017, Pages 275-285]
• Strain Nodes The Effect of Strain Nodes on the Energy Harvesting of the Cantilever Piezoelectric Beam with the Vibration Mode Excitation [Volume 17, Issue 10, 2017, Pages 65-72]
• Strain rate Survey the effect of forming speed on fld for Al 6061 sheets [Volume 17, Issue 10, 2017, Pages 333-340]
• Stratified Mixture Formation Numerical Simulation of Spray and Combustion and Investigation of Stratified Air-Fuel Mixture Formation in Gasoline Direct Injection Engine [Volume 17, Issue 3, 2017, Pages 385-396]
• Stratospheric Airship Design of Robust H_∞ Control for Stabilizing of Stratospheric Airship with Parametric Uncertainty and External Disturbance [Volume 17, Issue 3, 2017, Pages 216-226]
• Stress Analysis Microstructure and mechanical properties of aluminum to aluminum clad steel lap joint using gas tungsten arc welding process [Volume 17, Issue 12, 2017, Pages 328-336]
• Stress field Elastic behavior of an edge dislocation in a core-shell nanowire embedded to an infinite matrix within surface/interface theory of elasticity [Volume 17, Issue 2, 2017, Pages 439-445]
• Stress Intensity Factors (SIFs) Extended Finite Element analysis of a stationary crack in hygrothermal isotropic media subjected to thermal shock [Volume 17, Issue 1, 2017, Pages 56-66]
• Strouhal number Experimental Investigation of aero acoustic noise generation process from a wall mounted square cylinder at incidence [Volume 17, Issue 9, 2017, Pages 327-338]
• Structured Grid Mesh Numerical study of the performance of an oscillating wave surge converter using volume of fluid method [Volume 17, Issue 6, 2017, Pages 265-276]
• Structured Grids Development of an Open-Source Software framework for Finite Difference Schemes with Parallel Processing Feature [Volume 17, Issue 12, 2017, Pages 400-408]
• Sub-Grid Scales Implementation of the anisotropic minimum-dissipation (AMD) sub-grid scale model in OpenFOAM and its evaluation in treating turbulent channel flow [Volume 17, Issue 12, 2017, Pages 478-484]
• Sub-Grid Scale Stress Tensor Evaluating modulated gradient model in computing subgrid scale tensors [Volume 17, Issue 7, 2017, Pages 283-294]
• Subharmonic resonance Dynamic analysis of a micro beam based on sub-harmonic parametric excitation [Volume 17, Issue 5, 2017, Pages 374-384]
• Sub-optimal A Closed Loop Sub-Optimal Guidance Design for Sub-Orbital Flying Systems [Volume 17, Issue 9, 2017, Pages 97-106]
• Sub surface cracks Analysis of Laser Interfrometry Parameters in the Evaluation of Defects in the Polymer Matrix Composites [Volume 17, Issue 9, 2017, Pages 372-380]
• Suction and Injection Effects of suction/injection on flow and heat transfer over a permeable surface in presence of different nanofluids [Volume 17, Issue 9, 2017, Pages 439-449]
• Sulfur Numerical simulation the effect of existing sulfur in the concentrate particles on flame temperature and pollutants in the flash furnace copper smelting [Volume 17, Issue 7, 2017, Pages 101-108]
• Superhydrophobic Effect of Superhydrophobic Surface on Drag Coefficient of SD7003 Foil: A Numerical Approach [Volume 17, Issue 2, 2017, Pages 126-134]
• Superhydrophobic Walls Effects of convergence of the superhydrophobic walls on the performance of microchannels as heat sinks [Volume 17, Issue 7, 2017, Pages 49-58]
• Supersonic aerodynamic Numerical Investigation of Lateral jet interaction effects on aerodynamic behavior of a supersonic projectile [Volume 17, Issue 4, 2017, Pages 431-442]
• Supersonic mix compression system Design and numerical analysis of Mach 3.0 inlet [Volume 17, Issue 4, 2017, Pages 199-208]
• Supersonic Turbulent Flow Numerical analysis of attack angle effects on 3D supersonic turbulent flow around of blunt body along with opposite jet injection [Volume 17, Issue 3, 2017, Pages 355-366]
• Super-Twisting Sliding Mode Control Trajectory Tracking of a Quadrotor for Obstacle Avoidance Using Super-Twisting Sliding Mode Controller and Observer. [Volume 17, Issue 8, 2017, Pages 333-342]
• Support conditions Finite element simulation of selective laser melting process for fabrication of a sample part under various support conditions [Volume 17, Issue 4, 2017, Pages 143-153]
• Support vector machine Comparison between empirical mode decomposition and wavelet transform for unbalance detection on rotating machinery using optimized support vector machine [Volume 17, Issue 2, 2017, Pages 325-332]
• Support Vector Machines Combination of independent component analysis and support vector machines for intelligent faults diagnosis of rotating machinery [Volume 17, Issue 6, 2017, Pages 257-264]
• Surface chemical Reaction Numerical Investigation of non-homogeneity and specific area in porous media on packed bed reactor performance by Lattice Boltzmann Method [Volume 17, Issue 12, 2017, Pages 446-456]
• Surface effect The effect of wall force field on temperature distribution in nanochannel contains Lennard-Jones fluid by molecular dynamic simulation [Volume 17, Issue 6, 2017, Pages 23-31]
• Surface energy Calculation of size-dependent surface energy of metallic nanoplates using molecular dynamics simulations [Volume 17, Issue 11, 2017, Pages 447-452]
• Surface integrity Experimental Investigation of Metal Removal Efficiency and Machined Surface Texture in EDM of Titanium Aluminide Compound [Volume 17, Issue 12, 2017, Pages 47-55]
• Surface/Interface effect Elastic behavior of an edge dislocation in a core-shell nanowire embedded to an infinite matrix within surface/interface theory of elasticity [Volume 17, Issue 2, 2017, Pages 439-445]
• Surface pressure fluctuations Experimental investigation of surface pressure spectra beneath turbulent boundary layer over a flat plate with microphone [Volume 17, Issue 1, 2017, Pages 263-272]
• Surface roughness The effect of minimum quantity lubrication on surface roughness in hard turning of 100Cr6 bearing steel with Nano-CBN tool [Volume 17, Issue 3, 2017, Pages 263-269]
• Surface roughness The effect of workpiece hardness and cutting parameters on surface roughness in dry hard turning of X210Cr12 cold tool steel [Volume 17, Issue 6, 2017, Pages 241-247]
• Surface roughness Development a new cutting tool by changing the surface texture for increasing the machining performance [Volume 17, Issue 7, 2017, Pages 441-450]
• Surface roughness Effect of Blade Surface Roughness on Performance of a Low-Pressure Steam Turbine Stage [Volume 17, Issue 8, 2017, Pages 29-37]
• Surface roughness Modeling and optimizing lapping process of 440C steel by Neural Network and Multi-objective particle swarm optimization algorithm [Volume 17, Issue 8, 2017, Pages 201-212]
• Surface treatment Experimental investigation of effect of thermal cycling and metal surface treatment on flexural properties laminate composite of aluminium- epoxy/basalt fibers [Volume 17, Issue 8, 2017, Pages 369-376]
• Surface vortex Experimental investigation of dynamics of the air-core vortices and estimating the air entrainment rate at a horizontal intake [Volume 17, Issue 8, 2017, Pages 59-67]
• Surface vorticity method Investigation of ducted wind turbine using potential flow method [Volume 17, Issue 10, 2017, Pages 350-358]
• Surface Wave Energy Numerical study of the performance of an oscillating wave surge converter using volume of fluid method [Volume 17, Issue 6, 2017, Pages 265-276]
• Swirl and Tumble Flows Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
• Swirl Meter Experimental and numerical investigation of the effect of pressure on in-cylinder swirl flow using swirl meter [Volume 17, Issue 3, 2017, Pages 327-335]
• Switching process Theoretical and Numerical investigation on switching process of electroosmotic flow in a Y-shape three-way channel [Volume 17, Issue 12, 2017, Pages 309-318]